https://hinzmotorsport.com 4468575666199 4468575666199_31591706755095 Audi RS3 Camber Plates ccpmk7 https://hinzmotorsport.com/products/audi-rs3-camber-plates Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/MK7VW_AudiCamberPlates.jpg?v=1598446568 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 Stock Stock Standard Dome449.00 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/NewCamberPlate.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125625-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125723-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/BlackandWhite.jpg?v=1598446578 Audi 8S (TT, TTS, TTRS) 8V (A3, S3, RS3) Camber Caster PlatesWe are pleased to announce that we now carry Ground Control Suspension Products for Audi and VW platforms. These camber plates were co-developed with Ground Control and have been tested and proven on street cars under some of the most grueling conditions such as on our 2017 Audi RS3 as featured here in One Lap of America.The Ground Control STREET/SPORT plate, a special version of our camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for over 3 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL.Configuration options include 2.25", 2.50", 60mm or Stock springs, low profile dome or standard dome plates and a Poly spring bushing.*Subframe and chassis variations affect total camber gain**The included Ground Control nut must be used with these camber plates!**u00a0 4468575666199 4468575666199_31599342518295 Audi RS3 Camber Plates ccpmk7 https://hinzmotorsport.com/products/audi-rs3-camber-plates Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/MK7VW_AudiCamberPlates.jpg?v=1598446568 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 Stock Stock Low Profile Dome449.00 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/NewCamberPlate.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125625-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125723-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/BlackandWhite.jpg?v=1598446578 Audi 8S (TT, TTS, TTRS) 8V (A3, S3, RS3) Camber Caster PlatesWe are pleased to announce that we now carry Ground Control Suspension Products for Audi and VW platforms. These camber plates were co-developed with Ground Control and have been tested and proven on street cars under some of the most grueling conditions such as on our 2017 Audi RS3 as featured here in One Lap of America.The Ground Control STREET/SPORT plate, a special version of our camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for over 3 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL.Configuration options include 2.25", 2.50", 60mm or Stock springs, low profile dome or standard dome plates and a Poly spring bushing.*Subframe and chassis variations affect total camber gain**The included Ground Control nut must be used with these camber plates!**u00a0 4468575666199 4468575666199_31591706656791 Audi RS3 Camber Plates ccpmk7 https://hinzmotorsport.com/products/audi-rs3-camber-plates Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/MK7VW_AudiCamberPlates.jpg?v=1598446568 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 Stock 2.25" Standard Dome449.00 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/NewCamberPlate.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125625-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125723-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/BlackandWhite.jpg?v=1598446578 Audi 8S (TT, TTS, TTRS) 8V (A3, S3, RS3) Camber Caster PlatesWe are pleased to announce that we now carry Ground Control Suspension Products for Audi and VW platforms. These camber plates were co-developed with Ground Control and have been tested and proven on street cars under some of the most grueling conditions such as on our 2017 Audi RS3 as featured here in One Lap of America.The Ground Control STREET/SPORT plate, a special version of our camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for over 3 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL.Configuration options include 2.25", 2.50", 60mm or Stock springs, low profile dome or standard dome plates and a Poly spring bushing.*Subframe and chassis variations affect total camber gain**The included Ground Control nut must be used with these camber plates!**u00a0 4468575666199 4468575666199_31599341928471 Audi RS3 Camber Plates ccpmk7 https://hinzmotorsport.com/products/audi-rs3-camber-plates Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/MK7VW_AudiCamberPlates.jpg?v=1598446568 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 Stock 2.25" Low Profile Dome449.00 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/NewCamberPlate.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125625-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125723-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/BlackandWhite.jpg?v=1598446578 Audi 8S (TT, TTS, TTRS) 8V (A3, S3, RS3) Camber Caster PlatesWe are pleased to announce that we now carry Ground Control Suspension Products for Audi and VW platforms. These camber plates were co-developed with Ground Control and have been tested and proven on street cars under some of the most grueling conditions such as on our 2017 Audi RS3 as featured here in One Lap of America.The Ground Control STREET/SPORT plate, a special version of our camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for over 3 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL.Configuration options include 2.25", 2.50", 60mm or Stock springs, low profile dome or standard dome plates and a Poly spring bushing.*Subframe and chassis variations affect total camber gain**The included Ground Control nut must be used with these camber plates!**u00a0 4468575666199 4468575666199_31591706722327 Audi RS3 Camber Plates ccpmk7 https://hinzmotorsport.com/products/audi-rs3-camber-plates Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/MK7VW_AudiCamberPlates.jpg?v=1598446568 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 Stock 60mm Standard Dome449.00 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/NewCamberPlate.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125625-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125723-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/BlackandWhite.jpg?v=1598446578 Audi 8S (TT, TTS, TTRS) 8V (A3, S3, RS3) Camber Caster PlatesWe are pleased to announce that we now carry Ground Control Suspension Products for Audi and VW platforms. These camber plates were co-developed with Ground Control and have been tested and proven on street cars under some of the most grueling conditions such as on our 2017 Audi RS3 as featured here in One Lap of America.The Ground Control STREET/SPORT plate, a special version of our camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for over 3 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL.Configuration options include 2.25", 2.50", 60mm or Stock springs, low profile dome or standard dome plates and a Poly spring bushing.*Subframe and chassis variations affect total camber gain**The included Ground Control nut must be used with these camber plates!**u00a0 4468575666199 4468575666199_31599342452759 Audi RS3 Camber Plates ccpmk7 https://hinzmotorsport.com/products/audi-rs3-camber-plates Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/MK7VW_AudiCamberPlates.jpg?v=1598446568 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 Stock 60mm Low Profile Dome449.00 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/NewCamberPlate.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125625-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125723-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/BlackandWhite.jpg?v=1598446578 Audi 8S (TT, TTS, TTRS) 8V (A3, S3, RS3) Camber Caster PlatesWe are pleased to announce that we now carry Ground Control Suspension Products for Audi and VW platforms. These camber plates were co-developed with Ground Control and have been tested and proven on street cars under some of the most grueling conditions such as on our 2017 Audi RS3 as featured here in One Lap of America.The Ground Control STREET/SPORT plate, a special version of our camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for over 3 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL.Configuration options include 2.25", 2.50", 60mm or Stock springs, low profile dome or standard dome plates and a Poly spring bushing.*Subframe and chassis variations affect total camber gain**The included Ground Control nut must be used with these camber plates!**u00a0 4468575666199 4468575666199_31591706689559 Audi RS3 Camber Plates ccpmk7 https://hinzmotorsport.com/products/audi-rs3-camber-plates Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/MK7VW_AudiCamberPlates.jpg?v=1598446568 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 Stock 2.50" (no poly insert) Standard Dome449.00 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/NewCamberPlate.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125625-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125723-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/BlackandWhite.jpg?v=1598446578 Audi 8S (TT, TTS, TTRS) 8V (A3, S3, RS3) Camber Caster PlatesWe are pleased to announce that we now carry Ground Control Suspension Products for Audi and VW platforms. These camber plates were co-developed with Ground Control and have been tested and proven on street cars under some of the most grueling conditions such as on our 2017 Audi RS3 as featured here in One Lap of America.The Ground Control STREET/SPORT plate, a special version of our camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for over 3 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL.Configuration options include 2.25", 2.50", 60mm or Stock springs, low profile dome or standard dome plates and a Poly spring bushing.*Subframe and chassis variations affect total camber gain**The included Ground Control nut must be used with these camber plates!**u00a0 4468575666199 4468575666199_31599341961239 Audi RS3 Camber Plates ccpmk7 https://hinzmotorsport.com/products/audi-rs3-camber-plates Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/MK7VW_AudiCamberPlates.jpg?v=1598446568 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 Stock 2.50" (no poly insert) Low Profile Dome449.00 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/NewCamberPlate.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125625-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125723-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/BlackandWhite.jpg?v=1598446578 Audi 8S (TT, TTS, TTRS) 8V (A3, S3, RS3) Camber Caster PlatesWe are pleased to announce that we now carry Ground Control Suspension Products for Audi and VW platforms. These camber plates were co-developed with Ground Control and have been tested and proven on street cars under some of the most grueling conditions such as on our 2017 Audi RS3 as featured here in One Lap of America.The Ground Control STREET/SPORT plate, a special version of our camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for over 3 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL.Configuration options include 2.25", 2.50", 60mm or Stock springs, low profile dome or standard dome plates and a Poly spring bushing.*Subframe and chassis variations affect total camber gain**The included Ground Control nut must be used with these camber plates!**u00a0 4468575666199 4468575666199_31600769400855 Audi RS3 Camber Plates ccpmk7 https://hinzmotorsport.com/products/audi-rs3-camber-plates Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/MK7VW_AudiCamberPlates.jpg?v=1598446568 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 Stock 2.50" (with poly insert) Standard Dome449.00 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/NewCamberPlate.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125625-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125723-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/BlackandWhite.jpg?v=1598446578 Audi 8S (TT, TTS, TTRS) 8V (A3, S3, RS3) Camber Caster PlatesWe are pleased to announce that we now carry Ground Control Suspension Products for Audi and VW platforms. These camber plates were co-developed with Ground Control and have been tested and proven on street cars under some of the most grueling conditions such as on our 2017 Audi RS3 as featured here in One Lap of America.The Ground Control STREET/SPORT plate, a special version of our camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for over 3 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL.Configuration options include 2.25", 2.50", 60mm or Stock springs, low profile dome or standard dome plates and a Poly spring bushing.*Subframe and chassis variations affect total camber gain**The included Ground Control nut must be used with these camber plates!**u00a0 4468575666199 4468575666199_31600771760151 Audi RS3 Camber Plates ccpmk7 https://hinzmotorsport.com/products/audi-rs3-camber-plates Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/MK7VW_AudiCamberPlates.jpg?v=1598446568 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 Stock 2.50" (with poly insert) Low Profile Dome449.00 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/NewCamberPlate.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125625-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125723-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/BlackandWhite.jpg?v=1598446578 Audi 8S (TT, TTS, TTRS) 8V (A3, S3, RS3) Camber Caster PlatesWe are pleased to announce that we now carry Ground Control Suspension Products for Audi and VW platforms. These camber plates were co-developed with Ground Control and have been tested and proven on street cars under some of the most grueling conditions such as on our 2017 Audi RS3 as featured here in One Lap of America.The Ground Control STREET/SPORT plate, a special version of our camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for over 3 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL.Configuration options include 2.25", 2.50", 60mm or Stock springs, low profile dome or standard dome plates and a Poly spring bushing.*Subframe and chassis variations affect total camber gain**The included Ground Control nut must be used with these camber plates!**u00a0 4468575666199 4468575666199_31591707672599 Audi RS3 Camber Plates ccpmk7 https://hinzmotorsport.com/products/audi-rs3-camber-plates Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/MK7VW_AudiCamberPlates.jpg?v=1598446568 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 AST Stock Standard Dome449.00 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/NewCamberPlate.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125625-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125723-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/BlackandWhite.jpg?v=1598446578 Audi 8S (TT, TTS, TTRS) 8V (A3, S3, RS3) Camber Caster PlatesWe are pleased to announce that we now carry Ground Control Suspension Products for Audi and VW platforms. These camber plates were co-developed with Ground Control and have been tested and proven on street cars under some of the most grueling conditions such as on our 2017 Audi RS3 as featured here in One Lap of America.The Ground Control STREET/SPORT plate, a special version of our camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for over 3 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL.Configuration options include 2.25", 2.50", 60mm or Stock springs, low profile dome or standard dome plates and a Poly spring bushing.*Subframe and chassis variations affect total camber gain**The included Ground Control nut must be used with these camber plates!**u00a0 4468575666199 4468575666199_31599346319383 Audi RS3 Camber Plates ccpmk7 https://hinzmotorsport.com/products/audi-rs3-camber-plates Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/MK7VW_AudiCamberPlates.jpg?v=1598446568 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 AST Stock Low Profile Dome449.00 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/NewCamberPlate.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125625-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125723-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/BlackandWhite.jpg?v=1598446578 Audi 8S (TT, TTS, TTRS) 8V (A3, S3, RS3) Camber Caster PlatesWe are pleased to announce that we now carry Ground Control Suspension Products for Audi and VW platforms. These camber plates were co-developed with Ground Control and have been tested and proven on street cars under some of the most grueling conditions such as on our 2017 Audi RS3 as featured here in One Lap of America.The Ground Control STREET/SPORT plate, a special version of our camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for over 3 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL.Configuration options include 2.25", 2.50", 60mm or Stock springs, low profile dome or standard dome plates and a Poly spring bushing.*Subframe and chassis variations affect total camber gain**The included Ground Control nut must be used with these camber plates!**u00a0 4468575666199 4468575666199_31591707574295 Audi RS3 Camber Plates ccpmk7 https://hinzmotorsport.com/products/audi-rs3-camber-plates Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/MK7VW_AudiCamberPlates.jpg?v=1598446568 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 AST 2.25" Standard Dome449.00 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/NewCamberPlate.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125625-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125723-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/BlackandWhite.jpg?v=1598446578 Audi 8S (TT, TTS, TTRS) 8V (A3, S3, RS3) Camber Caster PlatesWe are pleased to announce that we now carry Ground Control Suspension Products for Audi and VW platforms. These camber plates were co-developed with Ground Control and have been tested and proven on street cars under some of the most grueling conditions such as on our 2017 Audi RS3 as featured here in One Lap of America.The Ground Control STREET/SPORT plate, a special version of our camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for over 3 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL.Configuration options include 2.25", 2.50", 60mm or Stock springs, low profile dome or standard dome plates and a Poly spring bushing.*Subframe and chassis variations affect total camber gain**The included Ground Control nut must be used with these camber plates!**u00a0 4468575666199 4468575666199_31599345795095 Audi RS3 Camber Plates ccpmk7 https://hinzmotorsport.com/products/audi-rs3-camber-plates Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/MK7VW_AudiCamberPlates.jpg?v=1598446568 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 AST 2.25" Low Profile Dome449.00 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/NewCamberPlate.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125625-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125723-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/BlackandWhite.jpg?v=1598446578 Audi 8S (TT, TTS, TTRS) 8V (A3, S3, RS3) Camber Caster PlatesWe are pleased to announce that we now carry Ground Control Suspension Products for Audi and VW platforms. These camber plates were co-developed with Ground Control and have been tested and proven on street cars under some of the most grueling conditions such as on our 2017 Audi RS3 as featured here in One Lap of America.The Ground Control STREET/SPORT plate, a special version of our camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for over 3 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL.Configuration options include 2.25", 2.50", 60mm or Stock springs, low profile dome or standard dome plates and a Poly spring bushing.*Subframe and chassis variations affect total camber gain**The included Ground Control nut must be used with these camber plates!**u00a0 4468575666199 4468575666199_31591707639831 Audi RS3 Camber Plates ccpmk7 https://hinzmotorsport.com/products/audi-rs3-camber-plates Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/MK7VW_AudiCamberPlates.jpg?v=1598446568 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 AST 60mm Standard Dome449.00 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/NewCamberPlate.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125625-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125723-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/BlackandWhite.jpg?v=1598446578 Audi 8S (TT, TTS, TTRS) 8V (A3, S3, RS3) Camber Caster PlatesWe are pleased to announce that we now carry Ground Control Suspension Products for Audi and VW platforms. These camber plates were co-developed with Ground Control and have been tested and proven on street cars under some of the most grueling conditions such as on our 2017 Audi RS3 as featured here in One Lap of America.The Ground Control STREET/SPORT plate, a special version of our camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for over 3 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL.Configuration options include 2.25", 2.50", 60mm or Stock springs, low profile dome or standard dome plates and a Poly spring bushing.*Subframe and chassis variations affect total camber gain**The included Ground Control nut must be used with these camber plates!**u00a0 4468575666199 4468575666199_31599346253847 Audi RS3 Camber Plates ccpmk7 https://hinzmotorsport.com/products/audi-rs3-camber-plates Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/MK7VW_AudiCamberPlates.jpg?v=1598446568 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 AST 60mm Low Profile Dome449.00 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/NewCamberPlate.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125625-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125723-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/BlackandWhite.jpg?v=1598446578 Audi 8S (TT, TTS, TTRS) 8V (A3, S3, RS3) Camber Caster PlatesWe are pleased to announce that we now carry Ground Control Suspension Products for Audi and VW platforms. These camber plates were co-developed with Ground Control and have been tested and proven on street cars under some of the most grueling conditions such as on our 2017 Audi RS3 as featured here in One Lap of America.The Ground Control STREET/SPORT plate, a special version of our camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for over 3 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL.Configuration options include 2.25", 2.50", 60mm or Stock springs, low profile dome or standard dome plates and a Poly spring bushing.*Subframe and chassis variations affect total camber gain**The included Ground Control nut must be used with these camber plates!**u00a0 4468575666199 4468575666199_31591707607063 Audi RS3 Camber Plates ccpmk7 https://hinzmotorsport.com/products/audi-rs3-camber-plates Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/MK7VW_AudiCamberPlates.jpg?v=1598446568 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 AST 2.50" (no poly insert) Standard Dome449.00 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/NewCamberPlate.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125625-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125723-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/BlackandWhite.jpg?v=1598446578 Audi 8S (TT, TTS, TTRS) 8V (A3, S3, RS3) Camber Caster PlatesWe are pleased to announce that we now carry Ground Control Suspension Products for Audi and VW platforms. These camber plates were co-developed with Ground Control and have been tested and proven on street cars under some of the most grueling conditions such as on our 2017 Audi RS3 as featured here in One Lap of America.The Ground Control STREET/SPORT plate, a special version of our camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for over 3 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL.Configuration options include 2.25", 2.50", 60mm or Stock springs, low profile dome or standard dome plates and a Poly spring bushing.*Subframe and chassis variations affect total camber gain**The included Ground Control nut must be used with these camber plates!**u00a0 4468575666199 4468575666199_31599346221079 Audi RS3 Camber Plates ccpmk7 https://hinzmotorsport.com/products/audi-rs3-camber-plates Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/MK7VW_AudiCamberPlates.jpg?v=1598446568 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 AST 2.50" (no poly insert) Low Profile Dome449.00 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/NewCamberPlate.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125625-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125723-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/BlackandWhite.jpg?v=1598446578 Audi 8S (TT, TTS, TTRS) 8V (A3, S3, RS3) Camber Caster PlatesWe are pleased to announce that we now carry Ground Control Suspension Products for Audi and VW platforms. These camber plates were co-developed with Ground Control and have been tested and proven on street cars under some of the most grueling conditions such as on our 2017 Audi RS3 as featured here in One Lap of America.The Ground Control STREET/SPORT plate, a special version of our camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for over 3 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL.Configuration options include 2.25", 2.50", 60mm or Stock springs, low profile dome or standard dome plates and a Poly spring bushing.*Subframe and chassis variations affect total camber gain**The included Ground Control nut must be used with these camber plates!**u00a0 4468575666199 4468575666199_31600769564695 Audi RS3 Camber Plates ccpmk7 https://hinzmotorsport.com/products/audi-rs3-camber-plates Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/MK7VW_AudiCamberPlates.jpg?v=1598446568 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 AST 2.50" (with poly insert) Standard Dome449.00 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/NewCamberPlate.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125625-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125723-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/BlackandWhite.jpg?v=1598446578 Audi 8S (TT, TTS, TTRS) 8V (A3, S3, RS3) Camber Caster PlatesWe are pleased to announce that we now carry Ground Control Suspension Products for Audi and VW platforms. These camber plates were co-developed with Ground Control and have been tested and proven on street cars under some of the most grueling conditions such as on our 2017 Audi RS3 as featured here in One Lap of America.The Ground Control STREET/SPORT plate, a special version of our camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for over 3 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL.Configuration options include 2.25", 2.50", 60mm or Stock springs, low profile dome or standard dome plates and a Poly spring bushing.*Subframe and chassis variations affect total camber gain**The included Ground Control nut must be used with these camber plates!**u00a0 4468575666199 4468575666199_31600771923991 Audi RS3 Camber Plates ccpmk7 https://hinzmotorsport.com/products/audi-rs3-camber-plates Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/MK7VW_AudiCamberPlates.jpg?v=1598446568 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 AST 2.50" (with poly insert) Low Profile Dome449.00 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/NewCamberPlate.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125625-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125723-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/BlackandWhite.jpg?v=1598446578 Audi 8S (TT, TTS, TTRS) 8V (A3, S3, RS3) Camber Caster PlatesWe are pleased to announce that we now carry Ground Control Suspension Products for Audi and VW platforms. These camber plates were co-developed with Ground Control and have been tested and proven on street cars under some of the most grueling conditions such as on our 2017 Audi RS3 as featured here in One Lap of America.The Ground Control STREET/SPORT plate, a special version of our camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for over 3 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL.Configuration options include 2.25", 2.50", 60mm or Stock springs, low profile dome or standard dome plates and a Poly spring bushing.*Subframe and chassis variations affect total camber gain**The included Ground Control nut must be used with these camber plates!**u00a0 4468575666199 4468575666199_31591707017239 Audi RS3 Camber Plates ccpmk7 https://hinzmotorsport.com/products/audi-rs3-camber-plates Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/MK7VW_AudiCamberPlates.jpg?v=1598446568 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 Bilstein Stock Standard Dome449.00 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/NewCamberPlate.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125625-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125723-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/BlackandWhite.jpg?v=1598446578 Audi 8S (TT, TTS, TTRS) 8V (A3, S3, RS3) Camber Caster PlatesWe are pleased to announce that we now carry Ground Control Suspension Products for Audi and VW platforms. These camber plates were co-developed with Ground Control and have been tested and proven on street cars under some of the most grueling conditions such as on our 2017 Audi RS3 as featured here in One Lap of America.The Ground Control STREET/SPORT plate, a special version of our camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for over 3 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL.Configuration options include 2.25", 2.50", 60mm or Stock springs, low profile dome or standard dome plates and a Poly spring bushing.*Subframe and chassis variations affect total camber gain**The included Ground Control nut must be used with these camber plates!**u00a0 4468575666199 4468575666199_31599343435799 Audi RS3 Camber Plates ccpmk7 https://hinzmotorsport.com/products/audi-rs3-camber-plates Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/MK7VW_AudiCamberPlates.jpg?v=1598446568 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 Bilstein Stock Low Profile Dome449.00 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/NewCamberPlate.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125625-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125723-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/BlackandWhite.jpg?v=1598446578 Audi 8S (TT, TTS, TTRS) 8V (A3, S3, RS3) Camber Caster PlatesWe are pleased to announce that we now carry Ground Control Suspension Products for Audi and VW platforms. These camber plates were co-developed with Ground Control and have been tested and proven on street cars under some of the most grueling conditions such as on our 2017 Audi RS3 as featured here in One Lap of America.The Ground Control STREET/SPORT plate, a special version of our camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for over 3 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL.Configuration options include 2.25", 2.50", 60mm or Stock springs, low profile dome or standard dome plates and a Poly spring bushing.*Subframe and chassis variations affect total camber gain**The included Ground Control nut must be used with these camber plates!**u00a0 4468575666199 4468575666199_31591706918935 Audi RS3 Camber Plates ccpmk7 https://hinzmotorsport.com/products/audi-rs3-camber-plates Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/MK7VW_AudiCamberPlates.jpg?v=1598446568 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 Bilstein 2.25" Standard Dome449.00 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/NewCamberPlate.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125625-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125723-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/BlackandWhite.jpg?v=1598446578 Audi 8S (TT, TTS, TTRS) 8V (A3, S3, RS3) Camber Caster PlatesWe are pleased to announce that we now carry Ground Control Suspension Products for Audi and VW platforms. These camber plates were co-developed with Ground Control and have been tested and proven on street cars under some of the most grueling conditions such as on our 2017 Audi RS3 as featured here in One Lap of America.The Ground Control STREET/SPORT plate, a special version of our camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for over 3 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL.Configuration options include 2.25", 2.50", 60mm or Stock springs, low profile dome or standard dome plates and a Poly spring bushing.*Subframe and chassis variations affect total camber gain**The included Ground Control nut must be used with these camber plates!**u00a0 4468575666199 4468575666199_31599343337495 Audi RS3 Camber Plates ccpmk7 https://hinzmotorsport.com/products/audi-rs3-camber-plates Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/MK7VW_AudiCamberPlates.jpg?v=1598446568 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 Bilstein 2.25" Low Profile Dome449.00 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/NewCamberPlate.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125625-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125723-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/BlackandWhite.jpg?v=1598446578 Audi 8S (TT, TTS, TTRS) 8V (A3, S3, RS3) Camber Caster PlatesWe are pleased to announce that we now carry Ground Control Suspension Products for Audi and VW platforms. These camber plates were co-developed with Ground Control and have been tested and proven on street cars under some of the most grueling conditions such as on our 2017 Audi RS3 as featured here in One Lap of America.The Ground Control STREET/SPORT plate, a special version of our camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for over 3 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL.Configuration options include 2.25", 2.50", 60mm or Stock springs, low profile dome or standard dome plates and a Poly spring bushing.*Subframe and chassis variations affect total camber gain**The included Ground Control nut must be used with these camber plates!**u00a0 4468575666199 4468575666199_31591706984471 Audi RS3 Camber Plates ccpmk7 https://hinzmotorsport.com/products/audi-rs3-camber-plates Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/MK7VW_AudiCamberPlates.jpg?v=1598446568 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 Bilstein 60mm Standard Dome449.00 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/NewCamberPlate.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125625-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125723-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/BlackandWhite.jpg?v=1598446578 Audi 8S (TT, TTS, TTRS) 8V (A3, S3, RS3) Camber Caster PlatesWe are pleased to announce that we now carry Ground Control Suspension Products for Audi and VW platforms. These camber plates were co-developed with Ground Control and have been tested and proven on street cars under some of the most grueling conditions such as on our 2017 Audi RS3 as featured here in One Lap of America.The Ground Control STREET/SPORT plate, a special version of our camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for over 3 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL.Configuration options include 2.25", 2.50", 60mm or Stock springs, low profile dome or standard dome plates and a Poly spring bushing.*Subframe and chassis variations affect total camber gain**The included Ground Control nut must be used with these camber plates!**u00a0 4468575666199 4468575666199_31599343403031 Audi RS3 Camber Plates ccpmk7 https://hinzmotorsport.com/products/audi-rs3-camber-plates Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/MK7VW_AudiCamberPlates.jpg?v=1598446568 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 Bilstein 60mm Low Profile Dome449.00 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/NewCamberPlate.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125625-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125723-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/BlackandWhite.jpg?v=1598446578 Audi 8S (TT, TTS, TTRS) 8V (A3, S3, RS3) Camber Caster PlatesWe are pleased to announce that we now carry Ground Control Suspension Products for Audi and VW platforms. These camber plates were co-developed with Ground Control and have been tested and proven on street cars under some of the most grueling conditions such as on our 2017 Audi RS3 as featured here in One Lap of America.The Ground Control STREET/SPORT plate, a special version of our camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for over 3 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL.Configuration options include 2.25", 2.50", 60mm or Stock springs, low profile dome or standard dome plates and a Poly spring bushing.*Subframe and chassis variations affect total camber gain**The included Ground Control nut must be used with these camber plates!**u00a0 4468575666199 4468575666199_31591706951703 Audi RS3 Camber Plates ccpmk7 https://hinzmotorsport.com/products/audi-rs3-camber-plates Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/MK7VW_AudiCamberPlates.jpg?v=1598446568 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 Bilstein 2.50" (no poly insert) Standard Dome449.00 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/NewCamberPlate.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125625-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125723-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/BlackandWhite.jpg?v=1598446578 Audi 8S (TT, TTS, TTRS) 8V (A3, S3, RS3) Camber Caster PlatesWe are pleased to announce that we now carry Ground Control Suspension Products for Audi and VW platforms. These camber plates were co-developed with Ground Control and have been tested and proven on street cars under some of the most grueling conditions such as on our 2017 Audi RS3 as featured here in One Lap of America.The Ground Control STREET/SPORT plate, a special version of our camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for over 3 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL.Configuration options include 2.25", 2.50", 60mm or Stock springs, low profile dome or standard dome plates and a Poly spring bushing.*Subframe and chassis variations affect total camber gain**The included Ground Control nut must be used with these camber plates!**u00a0 4468575666199 4468575666199_31599343370263 Audi RS3 Camber Plates ccpmk7 https://hinzmotorsport.com/products/audi-rs3-camber-plates Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/MK7VW_AudiCamberPlates.jpg?v=1598446568 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 Bilstein 2.50" (no poly insert) Low Profile Dome449.00 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/NewCamberPlate.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125625-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125723-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/BlackandWhite.jpg?v=1598446578 Audi 8S (TT, TTS, TTRS) 8V (A3, S3, RS3) Camber Caster PlatesWe are pleased to announce that we now carry Ground Control Suspension Products for Audi and VW platforms. These camber plates were co-developed with Ground Control and have been tested and proven on street cars under some of the most grueling conditions such as on our 2017 Audi RS3 as featured here in One Lap of America.The Ground Control STREET/SPORT plate, a special version of our camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for over 3 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL.Configuration options include 2.25", 2.50", 60mm or Stock springs, low profile dome or standard dome plates and a Poly spring bushing.*Subframe and chassis variations affect total camber gain**The included Ground Control nut must be used with these camber plates!**u00a0 4468575666199 4468575666199_31600769466391 Audi RS3 Camber Plates ccpmk7 https://hinzmotorsport.com/products/audi-rs3-camber-plates Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/MK7VW_AudiCamberPlates.jpg?v=1598446568 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 Bilstein 2.50" (with poly insert) Standard Dome449.00 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/NewCamberPlate.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125625-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125723-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/BlackandWhite.jpg?v=1598446578 Audi 8S (TT, TTS, TTRS) 8V (A3, S3, RS3) Camber Caster PlatesWe are pleased to announce that we now carry Ground Control Suspension Products for Audi and VW platforms. These camber plates were co-developed with Ground Control and have been tested and proven on street cars under some of the most grueling conditions such as on our 2017 Audi RS3 as featured here in One Lap of America.The Ground Control STREET/SPORT plate, a special version of our camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for over 3 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL.Configuration options include 2.25", 2.50", 60mm or Stock springs, low profile dome or standard dome plates and a Poly spring bushing.*Subframe and chassis variations affect total camber gain**The included Ground Control nut must be used with these camber plates!**u00a0 4468575666199 4468575666199_31600771825687 Audi RS3 Camber Plates ccpmk7 https://hinzmotorsport.com/products/audi-rs3-camber-plates Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/MK7VW_AudiCamberPlates.jpg?v=1598446568 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 Bilstein 2.50" (with poly insert) Low Profile Dome449.00 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/NewCamberPlate.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125625-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125723-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/BlackandWhite.jpg?v=1598446578 Audi 8S (TT, TTS, TTRS) 8V (A3, S3, RS3) Camber Caster PlatesWe are pleased to announce that we now carry Ground Control Suspension Products for Audi and VW platforms. These camber plates were co-developed with Ground Control and have been tested and proven on street cars under some of the most grueling conditions such as on our 2017 Audi RS3 as featured here in One Lap of America.The Ground Control STREET/SPORT plate, a special version of our camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for over 3 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL.Configuration options include 2.25", 2.50", 60mm or Stock springs, low profile dome or standard dome plates and a Poly spring bushing.*Subframe and chassis variations affect total camber gain**The included Ground Control nut must be used with these camber plates!**u00a0 4468575666199 4468575666199_31591707803671 Audi RS3 Camber Plates ccpmk7 https://hinzmotorsport.com/products/audi-rs3-camber-plates Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/MK7VW_AudiCamberPlates.jpg?v=1598446568 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 Eibach Stock Standard Dome449.00 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/NewCamberPlate.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125625-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125723-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/BlackandWhite.jpg?v=1598446578 Audi 8S (TT, TTS, TTRS) 8V (A3, S3, RS3) Camber Caster PlatesWe are pleased to announce that we now carry Ground Control Suspension Products for Audi and VW platforms. These camber plates were co-developed with Ground Control and have been tested and proven on street cars under some of the most grueling conditions such as on our 2017 Audi RS3 as featured here in One Lap of America.The Ground Control STREET/SPORT plate, a special version of our camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for over 3 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL.Configuration options include 2.25", 2.50", 60mm or Stock springs, low profile dome or standard dome plates and a Poly spring bushing.*Subframe and chassis variations affect total camber gain**The included Ground Control nut must be used with these camber plates!**u00a0 4468575666199 4468575666199_31599346515991 Audi RS3 Camber Plates ccpmk7 https://hinzmotorsport.com/products/audi-rs3-camber-plates Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/MK7VW_AudiCamberPlates.jpg?v=1598446568 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 Eibach Stock Low Profile Dome449.00 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/NewCamberPlate.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125625-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125723-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/BlackandWhite.jpg?v=1598446578 Audi 8S (TT, TTS, TTRS) 8V (A3, S3, RS3) Camber Caster PlatesWe are pleased to announce that we now carry Ground Control Suspension Products for Audi and VW platforms. These camber plates were co-developed with Ground Control and have been tested and proven on street cars under some of the most grueling conditions such as on our 2017 Audi RS3 as featured here in One Lap of America.The Ground Control STREET/SPORT plate, a special version of our camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for over 3 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL.Configuration options include 2.25", 2.50", 60mm or Stock springs, low profile dome or standard dome plates and a Poly spring bushing.*Subframe and chassis variations affect total camber gain**The included Ground Control nut must be used with these camber plates!**u00a0 4468575666199 4468575666199_31591707705367 Audi RS3 Camber Plates ccpmk7 https://hinzmotorsport.com/products/audi-rs3-camber-plates Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/MK7VW_AudiCamberPlates.jpg?v=1598446568 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 Eibach 2.25" Standard Dome449.00 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/NewCamberPlate.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125625-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125723-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/BlackandWhite.jpg?v=1598446578 Audi 8S (TT, TTS, TTRS) 8V (A3, S3, RS3) Camber Caster PlatesWe are pleased to announce that we now carry Ground Control Suspension Products for Audi and VW platforms. These camber plates were co-developed with Ground Control and have been tested and proven on street cars under some of the most grueling conditions such as on our 2017 Audi RS3 as featured here in One Lap of America.The Ground Control STREET/SPORT plate, a special version of our camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for over 3 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL.Configuration options include 2.25", 2.50", 60mm or Stock springs, low profile dome or standard dome plates and a Poly spring bushing.*Subframe and chassis variations affect total camber gain**The included Ground Control nut must be used with these camber plates!**u00a0 4468575666199 4468575666199_31599346417687 Audi RS3 Camber Plates ccpmk7 https://hinzmotorsport.com/products/audi-rs3-camber-plates Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/MK7VW_AudiCamberPlates.jpg?v=1598446568 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 Eibach 2.25" Low Profile Dome449.00 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/NewCamberPlate.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125625-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125723-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/BlackandWhite.jpg?v=1598446578 Audi 8S (TT, TTS, TTRS) 8V (A3, S3, RS3) Camber Caster PlatesWe are pleased to announce that we now carry Ground Control Suspension Products for Audi and VW platforms. These camber plates were co-developed with Ground Control and have been tested and proven on street cars under some of the most grueling conditions such as on our 2017 Audi RS3 as featured here in One Lap of America.The Ground Control STREET/SPORT plate, a special version of our camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for over 3 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL.Configuration options include 2.25", 2.50", 60mm or Stock springs, low profile dome or standard dome plates and a Poly spring bushing.*Subframe and chassis variations affect total camber gain**The included Ground Control nut must be used with these camber plates!**u00a0 4468575666199 4468575666199_31591707770903 Audi RS3 Camber Plates ccpmk7 https://hinzmotorsport.com/products/audi-rs3-camber-plates Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/MK7VW_AudiCamberPlates.jpg?v=1598446568 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 Eibach 60mm Standard Dome449.00 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/NewCamberPlate.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125625-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125723-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/BlackandWhite.jpg?v=1598446578 Audi 8S (TT, TTS, TTRS) 8V (A3, S3, RS3) Camber Caster PlatesWe are pleased to announce that we now carry Ground Control Suspension Products for Audi and VW platforms. These camber plates were co-developed with Ground Control and have been tested and proven on street cars under some of the most grueling conditions such as on our 2017 Audi RS3 as featured here in One Lap of America.The Ground Control STREET/SPORT plate, a special version of our camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for over 3 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL.Configuration options include 2.25", 2.50", 60mm or Stock springs, low profile dome or standard dome plates and a Poly spring bushing.*Subframe and chassis variations affect total camber gain**The included Ground Control nut must be used with these camber plates!**u00a0 4468575666199 4468575666199_31599346483223 Audi RS3 Camber Plates ccpmk7 https://hinzmotorsport.com/products/audi-rs3-camber-plates Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/MK7VW_AudiCamberPlates.jpg?v=1598446568 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 Eibach 60mm Low Profile Dome449.00 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/NewCamberPlate.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125625-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125723-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/BlackandWhite.jpg?v=1598446578 Audi 8S (TT, TTS, TTRS) 8V (A3, S3, RS3) Camber Caster PlatesWe are pleased to announce that we now carry Ground Control Suspension Products for Audi and VW platforms. These camber plates were co-developed with Ground Control and have been tested and proven on street cars under some of the most grueling conditions such as on our 2017 Audi RS3 as featured here in One Lap of America.The Ground Control STREET/SPORT plate, a special version of our camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for over 3 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL.Configuration options include 2.25", 2.50", 60mm or Stock springs, low profile dome or standard dome plates and a Poly spring bushing.*Subframe and chassis variations affect total camber gain**The included Ground Control nut must be used with these camber plates!**u00a0 4468575666199 4468575666199_31591707738135 Audi RS3 Camber Plates ccpmk7 https://hinzmotorsport.com/products/audi-rs3-camber-plates Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/MK7VW_AudiCamberPlates.jpg?v=1598446568 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 Eibach 2.50" (no poly insert) Standard Dome449.00 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/NewCamberPlate.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125625-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125723-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/BlackandWhite.jpg?v=1598446578 Audi 8S (TT, TTS, TTRS) 8V (A3, S3, RS3) Camber Caster PlatesWe are pleased to announce that we now carry Ground Control Suspension Products for Audi and VW platforms. These camber plates were co-developed with Ground Control and have been tested and proven on street cars under some of the most grueling conditions such as on our 2017 Audi RS3 as featured here in One Lap of America.The Ground Control STREET/SPORT plate, a special version of our camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for over 3 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL.Configuration options include 2.25", 2.50", 60mm or Stock springs, low profile dome or standard dome plates and a Poly spring bushing.*Subframe and chassis variations affect total camber gain**The included Ground Control nut must be used with these camber plates!**u00a0 4468575666199 4468575666199_31599346450455 Audi RS3 Camber Plates ccpmk7 https://hinzmotorsport.com/products/audi-rs3-camber-plates Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/MK7VW_AudiCamberPlates.jpg?v=1598446568 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 Eibach 2.50" (no poly insert) Low Profile Dome449.00 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/NewCamberPlate.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125625-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125723-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/BlackandWhite.jpg?v=1598446578 Audi 8S (TT, TTS, TTRS) 8V (A3, S3, RS3) Camber Caster PlatesWe are pleased to announce that we now carry Ground Control Suspension Products for Audi and VW platforms. These camber plates were co-developed with Ground Control and have been tested and proven on street cars under some of the most grueling conditions such as on our 2017 Audi RS3 as featured here in One Lap of America.The Ground Control STREET/SPORT plate, a special version of our camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for over 3 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL.Configuration options include 2.25", 2.50", 60mm or Stock springs, low profile dome or standard dome plates and a Poly spring bushing.*Subframe and chassis variations affect total camber gain**The included Ground Control nut must be used with these camber plates!**u00a0 4468575666199 4468575666199_31600769597463 Audi RS3 Camber Plates ccpmk7 https://hinzmotorsport.com/products/audi-rs3-camber-plates Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/MK7VW_AudiCamberPlates.jpg?v=1598446568 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 Eibach 2.50" (with poly insert) Standard Dome449.00 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/NewCamberPlate.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125625-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125723-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/BlackandWhite.jpg?v=1598446578 Audi 8S (TT, TTS, TTRS) 8V (A3, S3, RS3) Camber Caster PlatesWe are pleased to announce that we now carry Ground Control Suspension Products for Audi and VW platforms. These camber plates were co-developed with Ground Control and have been tested and proven on street cars under some of the most grueling conditions such as on our 2017 Audi RS3 as featured here in One Lap of America.The Ground Control STREET/SPORT plate, a special version of our camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for over 3 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL.Configuration options include 2.25", 2.50", 60mm or Stock springs, low profile dome or standard dome plates and a Poly spring bushing.*Subframe and chassis variations affect total camber gain**The included Ground Control nut must be used with these camber plates!**u00a0 4468575666199 4468575666199_31600771956759 Audi RS3 Camber Plates ccpmk7 https://hinzmotorsport.com/products/audi-rs3-camber-plates Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/MK7VW_AudiCamberPlates.jpg?v=1598446568 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 Eibach 2.50" (with poly insert) Low Profile Dome449.00 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/NewCamberPlate.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125625-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125723-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/BlackandWhite.jpg?v=1598446578 Audi 8S (TT, TTS, TTRS) 8V (A3, S3, RS3) Camber Caster PlatesWe are pleased to announce that we now carry Ground Control Suspension Products for Audi and VW platforms. These camber plates were co-developed with Ground Control and have been tested and proven on street cars under some of the most grueling conditions such as on our 2017 Audi RS3 as featured here in One Lap of America.The Ground Control STREET/SPORT plate, a special version of our camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for over 3 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL.Configuration options include 2.25", 2.50", 60mm or Stock springs, low profile dome or standard dome plates and a Poly spring bushing.*Subframe and chassis variations affect total camber gain**The included Ground Control nut must be used with these camber plates!**u00a0 4468575666199 4468575666199_31591707148311 Audi RS3 Camber Plates ccpmk7 https://hinzmotorsport.com/products/audi-rs3-camber-plates Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/MK7VW_AudiCamberPlates.jpg?v=1598446568 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 JRZ Stock Standard Dome449.00 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/NewCamberPlate.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125625-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125723-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/BlackandWhite.jpg?v=1598446578 Audi 8S (TT, TTS, TTRS) 8V (A3, S3, RS3) Camber Caster PlatesWe are pleased to announce that we now carry Ground Control Suspension Products for Audi and VW platforms. These camber plates were co-developed with Ground Control and have been tested and proven on street cars under some of the most grueling conditions such as on our 2017 Audi RS3 as featured here in One Lap of America.The Ground Control STREET/SPORT plate, a special version of our camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for over 3 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL.Configuration options include 2.25", 2.50", 60mm or Stock springs, low profile dome or standard dome plates and a Poly spring bushing.*Subframe and chassis variations affect total camber gain**The included Ground Control nut must be used with these camber plates!**u00a0 4468575666199 4468575666199_31599344058391 Audi RS3 Camber Plates ccpmk7 https://hinzmotorsport.com/products/audi-rs3-camber-plates Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/MK7VW_AudiCamberPlates.jpg?v=1598446568 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 JRZ Stock Low Profile Dome449.00 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/NewCamberPlate.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125625-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125723-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/BlackandWhite.jpg?v=1598446578 Audi 8S (TT, TTS, TTRS) 8V (A3, S3, RS3) Camber Caster PlatesWe are pleased to announce that we now carry Ground Control Suspension Products for Audi and VW platforms. These camber plates were co-developed with Ground Control and have been tested and proven on street cars under some of the most grueling conditions such as on our 2017 Audi RS3 as featured here in One Lap of America.The Ground Control STREET/SPORT plate, a special version of our camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for over 3 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL.Configuration options include 2.25", 2.50", 60mm or Stock springs, low profile dome or standard dome plates and a Poly spring bushing.*Subframe and chassis variations affect total camber gain**The included Ground Control nut must be used with these camber plates!**u00a0 4468575666199 4468575666199_31591707050007 Audi RS3 Camber Plates ccpmk7 https://hinzmotorsport.com/products/audi-rs3-camber-plates Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/MK7VW_AudiCamberPlates.jpg?v=1598446568 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 JRZ 2.25" Standard Dome449.00 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/NewCamberPlate.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125625-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125723-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/BlackandWhite.jpg?v=1598446578 Audi 8S (TT, TTS, TTRS) 8V (A3, S3, RS3) Camber Caster PlatesWe are pleased to announce that we now carry Ground Control Suspension Products for Audi and VW platforms. These camber plates were co-developed with Ground Control and have been tested and proven on street cars under some of the most grueling conditions such as on our 2017 Audi RS3 as featured here in One Lap of America.The Ground Control STREET/SPORT plate, a special version of our camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for over 3 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL.Configuration options include 2.25", 2.50", 60mm or Stock springs, low profile dome or standard dome plates and a Poly spring bushing.*Subframe and chassis variations affect total camber gain**The included Ground Control nut must be used with these camber plates!**u00a0 4468575666199 4468575666199_31599343468567 Audi RS3 Camber Plates ccpmk7 https://hinzmotorsport.com/products/audi-rs3-camber-plates Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/MK7VW_AudiCamberPlates.jpg?v=1598446568 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 JRZ 2.25" Low Profile Dome449.00 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/NewCamberPlate.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125625-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125723-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/BlackandWhite.jpg?v=1598446578 Audi 8S (TT, TTS, TTRS) 8V (A3, S3, RS3) Camber Caster PlatesWe are pleased to announce that we now carry Ground Control Suspension Products for Audi and VW platforms. These camber plates were co-developed with Ground Control and have been tested and proven on street cars under some of the most grueling conditions such as on our 2017 Audi RS3 as featured here in One Lap of America.The Ground Control STREET/SPORT plate, a special version of our camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for over 3 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL.Configuration options include 2.25", 2.50", 60mm or Stock springs, low profile dome or standard dome plates and a Poly spring bushing.*Subframe and chassis variations affect total camber gain**The included Ground Control nut must be used with these camber plates!**u00a0 4468575666199 4468575666199_31591707115543 Audi RS3 Camber Plates ccpmk7 https://hinzmotorsport.com/products/audi-rs3-camber-plates Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/MK7VW_AudiCamberPlates.jpg?v=1598446568 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 JRZ 60mm Standard Dome449.00 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/NewCamberPlate.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125625-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125723-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/BlackandWhite.jpg?v=1598446578 Audi 8S (TT, TTS, TTRS) 8V (A3, S3, RS3) Camber Caster PlatesWe are pleased to announce that we now carry Ground Control Suspension Products for Audi and VW platforms. These camber plates were co-developed with Ground Control and have been tested and proven on street cars under some of the most grueling conditions such as on our 2017 Audi RS3 as featured here in One Lap of America.The Ground Control STREET/SPORT plate, a special version of our camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for over 3 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL.Configuration options include 2.25", 2.50", 60mm or Stock springs, low profile dome or standard dome plates and a Poly spring bushing.*Subframe and chassis variations affect total camber gain**The included Ground Control nut must be used with these camber plates!**u00a0 4468575666199 4468575666199_31599343665175 Audi RS3 Camber Plates ccpmk7 https://hinzmotorsport.com/products/audi-rs3-camber-plates Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/MK7VW_AudiCamberPlates.jpg?v=1598446568 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 JRZ 60mm Low Profile Dome449.00 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/NewCamberPlate.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125625-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125723-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/BlackandWhite.jpg?v=1598446578 Audi 8S (TT, TTS, TTRS) 8V (A3, S3, RS3) Camber Caster PlatesWe are pleased to announce that we now carry Ground Control Suspension Products for Audi and VW platforms. These camber plates were co-developed with Ground Control and have been tested and proven on street cars under some of the most grueling conditions such as on our 2017 Audi RS3 as featured here in One Lap of America.The Ground Control STREET/SPORT plate, a special version of our camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for over 3 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL.Configuration options include 2.25", 2.50", 60mm or Stock springs, low profile dome or standard dome plates and a Poly spring bushing.*Subframe and chassis variations affect total camber gain**The included Ground Control nut must be used with these camber plates!**u00a0 4468575666199 4468575666199_31591707082775 Audi RS3 Camber Plates ccpmk7 https://hinzmotorsport.com/products/audi-rs3-camber-plates Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/MK7VW_AudiCamberPlates.jpg?v=1598446568 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 JRZ 2.50" (no poly insert) Standard Dome449.00 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/NewCamberPlate.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125625-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125723-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/BlackandWhite.jpg?v=1598446578 Audi 8S (TT, TTS, TTRS) 8V (A3, S3, RS3) Camber Caster PlatesWe are pleased to announce that we now carry Ground Control Suspension Products for Audi and VW platforms. These camber plates were co-developed with Ground Control and have been tested and proven on street cars under some of the most grueling conditions such as on our 2017 Audi RS3 as featured here in One Lap of America.The Ground Control STREET/SPORT plate, a special version of our camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for over 3 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL.Configuration options include 2.25", 2.50", 60mm or Stock springs, low profile dome or standard dome plates and a Poly spring bushing.*Subframe and chassis variations affect total camber gain**The included Ground Control nut must be used with these camber plates!**u00a0 4468575666199 4468575666199_31599343501335 Audi RS3 Camber Plates ccpmk7 https://hinzmotorsport.com/products/audi-rs3-camber-plates Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/MK7VW_AudiCamberPlates.jpg?v=1598446568 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 JRZ 2.50" (no poly insert) Low Profile Dome449.00 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/NewCamberPlate.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125625-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125723-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/BlackandWhite.jpg?v=1598446578 Audi 8S (TT, TTS, TTRS) 8V (A3, S3, RS3) Camber Caster PlatesWe are pleased to announce that we now carry Ground Control Suspension Products for Audi and VW platforms. These camber plates were co-developed with Ground Control and have been tested and proven on street cars under some of the most grueling conditions such as on our 2017 Audi RS3 as featured here in One Lap of America.The Ground Control STREET/SPORT plate, a special version of our camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for over 3 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL.Configuration options include 2.25", 2.50", 60mm or Stock springs, low profile dome or standard dome plates and a Poly spring bushing.*Subframe and chassis variations affect total camber gain**The included Ground Control nut must be used with these camber plates!**u00a0 4468575666199 4468575666199_31600769499159 Audi RS3 Camber Plates ccpmk7 https://hinzmotorsport.com/products/audi-rs3-camber-plates Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/MK7VW_AudiCamberPlates.jpg?v=1598446568 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 JRZ 2.50" (with poly insert) Standard Dome449.00 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/NewCamberPlate.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125625-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125723-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/BlackandWhite.jpg?v=1598446578 Audi 8S (TT, TTS, TTRS) 8V (A3, S3, RS3) Camber Caster PlatesWe are pleased to announce that we now carry Ground Control Suspension Products for Audi and VW platforms. These camber plates were co-developed with Ground Control and have been tested and proven on street cars under some of the most grueling conditions such as on our 2017 Audi RS3 as featured here in One Lap of America.The Ground Control STREET/SPORT plate, a special version of our camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for over 3 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL.Configuration options include 2.25", 2.50", 60mm or Stock springs, low profile dome or standard dome plates and a Poly spring bushing.*Subframe and chassis variations affect total camber gain**The included Ground Control nut must be used with these camber plates!**u00a0 4468575666199 4468575666199_31600771858455 Audi RS3 Camber Plates ccpmk7 https://hinzmotorsport.com/products/audi-rs3-camber-plates Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/MK7VW_AudiCamberPlates.jpg?v=1598446568 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 JRZ 2.50" (with poly insert) Low Profile Dome449.00 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/NewCamberPlate.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125625-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125723-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/BlackandWhite.jpg?v=1598446578 Audi 8S (TT, TTS, TTRS) 8V (A3, S3, RS3) Camber Caster PlatesWe are pleased to announce that we now carry Ground Control Suspension Products for Audi and VW platforms. These camber plates were co-developed with Ground Control and have been tested and proven on street cars under some of the most grueling conditions such as on our 2017 Audi RS3 as featured here in One Lap of America.The Ground Control STREET/SPORT plate, a special version of our camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for over 3 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL.Configuration options include 2.25", 2.50", 60mm or Stock springs, low profile dome or standard dome plates and a Poly spring bushing.*Subframe and chassis variations affect total camber gain**The included Ground Control nut must be used with these camber plates!**u00a0 4468575666199 4468575666199_31591706886167 Audi RS3 Camber Plates ccpmk7 https://hinzmotorsport.com/products/audi-rs3-camber-plates Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/MK7VW_AudiCamberPlates.jpg?v=1598446568 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 Koni Stock Standard Dome449.00 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/NewCamberPlate.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125625-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125723-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/BlackandWhite.jpg?v=1598446578 Audi 8S (TT, TTS, TTRS) 8V (A3, S3, RS3) Camber Caster PlatesWe are pleased to announce that we now carry Ground Control Suspension Products for Audi and VW platforms. These camber plates were co-developed with Ground Control and have been tested and proven on street cars under some of the most grueling conditions such as on our 2017 Audi RS3 as featured here in One Lap of America.The Ground Control STREET/SPORT plate, a special version of our camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for over 3 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL.Configuration options include 2.25", 2.50", 60mm or Stock springs, low profile dome or standard dome plates and a Poly spring bushing.*Subframe and chassis variations affect total camber gain**The included Ground Control nut must be used with these camber plates!**u00a0 4468575666199 4468575666199_31599343304727 Audi RS3 Camber Plates ccpmk7 https://hinzmotorsport.com/products/audi-rs3-camber-plates Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/MK7VW_AudiCamberPlates.jpg?v=1598446568 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 Koni Stock Low Profile Dome449.00 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/NewCamberPlate.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125625-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125723-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/BlackandWhite.jpg?v=1598446578 Audi 8S (TT, TTS, TTRS) 8V (A3, S3, RS3) Camber Caster PlatesWe are pleased to announce that we now carry Ground Control Suspension Products for Audi and VW platforms. These camber plates were co-developed with Ground Control and have been tested and proven on street cars under some of the most grueling conditions such as on our 2017 Audi RS3 as featured here in One Lap of America.The Ground Control STREET/SPORT plate, a special version of our camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for over 3 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL.Configuration options include 2.25", 2.50", 60mm or Stock springs, low profile dome or standard dome plates and a Poly spring bushing.*Subframe and chassis variations affect total camber gain**The included Ground Control nut must be used with these camber plates!**u00a0 4468575666199 4468575666199_31591706787863 Audi RS3 Camber Plates ccpmk7 https://hinzmotorsport.com/products/audi-rs3-camber-plates Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/MK7VW_AudiCamberPlates.jpg?v=1598446568 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 Koni 2.25" Standard Dome449.00 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/NewCamberPlate.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125625-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125723-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/BlackandWhite.jpg?v=1598446578 Audi 8S (TT, TTS, TTRS) 8V (A3, S3, RS3) Camber Caster PlatesWe are pleased to announce that we now carry Ground Control Suspension Products for Audi and VW platforms. These camber plates were co-developed with Ground Control and have been tested and proven on street cars under some of the most grueling conditions such as on our 2017 Audi RS3 as featured here in One Lap of America.The Ground Control STREET/SPORT plate, a special version of our camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for over 3 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL.Configuration options include 2.25", 2.50", 60mm or Stock springs, low profile dome or standard dome plates and a Poly spring bushing.*Subframe and chassis variations affect total camber gain**The included Ground Control nut must be used with these camber plates!**u00a0 4468575666199 4468575666199_31599342551063 Audi RS3 Camber Plates ccpmk7 https://hinzmotorsport.com/products/audi-rs3-camber-plates Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/MK7VW_AudiCamberPlates.jpg?v=1598446568 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 Koni 2.25" Low Profile Dome449.00 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/NewCamberPlate.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125625-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125723-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/BlackandWhite.jpg?v=1598446578 Audi 8S (TT, TTS, TTRS) 8V (A3, S3, RS3) Camber Caster PlatesWe are pleased to announce that we now carry Ground Control Suspension Products for Audi and VW platforms. These camber plates were co-developed with Ground Control and have been tested and proven on street cars under some of the most grueling conditions such as on our 2017 Audi RS3 as featured here in One Lap of America.The Ground Control STREET/SPORT plate, a special version of our camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for over 3 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL.Configuration options include 2.25", 2.50", 60mm or Stock springs, low profile dome or standard dome plates and a Poly spring bushing.*Subframe and chassis variations affect total camber gain**The included Ground Control nut must be used with these camber plates!**u00a0 4468575666199 4468575666199_31591706853399 Audi RS3 Camber Plates ccpmk7 https://hinzmotorsport.com/products/audi-rs3-camber-plates Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/MK7VW_AudiCamberPlates.jpg?v=1598446568 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 Koni 60mm Standard Dome449.00 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/NewCamberPlate.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125625-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125723-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/BlackandWhite.jpg?v=1598446578 Audi 8S (TT, TTS, TTRS) 8V (A3, S3, RS3) Camber Caster PlatesWe are pleased to announce that we now carry Ground Control Suspension Products for Audi and VW platforms. These camber plates were co-developed with Ground Control and have been tested and proven on street cars under some of the most grueling conditions such as on our 2017 Audi RS3 as featured here in One Lap of America.The Ground Control STREET/SPORT plate, a special version of our camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for over 3 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL.Configuration options include 2.25", 2.50", 60mm or Stock springs, low profile dome or standard dome plates and a Poly spring bushing.*Subframe and chassis variations affect total camber gain**The included Ground Control nut must be used with these camber plates!**u00a0 4468575666199 4468575666199_31599343075351 Audi RS3 Camber Plates ccpmk7 https://hinzmotorsport.com/products/audi-rs3-camber-plates Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/MK7VW_AudiCamberPlates.jpg?v=1598446568 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 Koni 60mm Low Profile Dome449.00 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/NewCamberPlate.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125625-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125723-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/BlackandWhite.jpg?v=1598446578 Audi 8S (TT, TTS, TTRS) 8V (A3, S3, RS3) Camber Caster PlatesWe are pleased to announce that we now carry Ground Control Suspension Products for Audi and VW platforms. These camber plates were co-developed with Ground Control and have been tested and proven on street cars under some of the most grueling conditions such as on our 2017 Audi RS3 as featured here in One Lap of America.The Ground Control STREET/SPORT plate, a special version of our camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for over 3 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL.Configuration options include 2.25", 2.50", 60mm or Stock springs, low profile dome or standard dome plates and a Poly spring bushing.*Subframe and chassis variations affect total camber gain**The included Ground Control nut must be used with these camber plates!**u00a0 4468575666199 4468575666199_31591706820631 Audi RS3 Camber Plates ccpmk7 https://hinzmotorsport.com/products/audi-rs3-camber-plates Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/MK7VW_AudiCamberPlates.jpg?v=1598446568 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 Koni 2.50" (no poly insert) Standard Dome449.00 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/NewCamberPlate.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125625-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125723-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/BlackandWhite.jpg?v=1598446578 Audi 8S (TT, TTS, TTRS) 8V (A3, S3, RS3) Camber Caster PlatesWe are pleased to announce that we now carry Ground Control Suspension Products for Audi and VW platforms. These camber plates were co-developed with Ground Control and have been tested and proven on street cars under some of the most grueling conditions such as on our 2017 Audi RS3 as featured here in One Lap of America.The Ground Control STREET/SPORT plate, a special version of our camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for over 3 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL.Configuration options include 2.25", 2.50", 60mm or Stock springs, low profile dome or standard dome plates and a Poly spring bushing.*Subframe and chassis variations affect total camber gain**The included Ground Control nut must be used with these camber plates!**u00a0 4468575666199 4468575666199_31599343042583 Audi RS3 Camber Plates ccpmk7 https://hinzmotorsport.com/products/audi-rs3-camber-plates Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/MK7VW_AudiCamberPlates.jpg?v=1598446568 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 Koni 2.50" (no poly insert) Low Profile Dome449.00 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/NewCamberPlate.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125625-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125723-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/BlackandWhite.jpg?v=1598446578 Audi 8S (TT, TTS, TTRS) 8V (A3, S3, RS3) Camber Caster PlatesWe are pleased to announce that we now carry Ground Control Suspension Products for Audi and VW platforms. These camber plates were co-developed with Ground Control and have been tested and proven on street cars under some of the most grueling conditions such as on our 2017 Audi RS3 as featured here in One Lap of America.The Ground Control STREET/SPORT plate, a special version of our camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for over 3 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL.Configuration options include 2.25", 2.50", 60mm or Stock springs, low profile dome or standard dome plates and a Poly spring bushing.*Subframe and chassis variations affect total camber gain**The included Ground Control nut must be used with these camber plates!**u00a0 4468575666199 4468575666199_31600769433623 Audi RS3 Camber Plates ccpmk7 https://hinzmotorsport.com/products/audi-rs3-camber-plates Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/MK7VW_AudiCamberPlates.jpg?v=1598446568 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 Koni 2.50" (with poly insert) Standard Dome449.00 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/NewCamberPlate.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125625-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125723-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/BlackandWhite.jpg?v=1598446578 Audi 8S (TT, TTS, TTRS) 8V (A3, S3, RS3) Camber Caster PlatesWe are pleased to announce that we now carry Ground Control Suspension Products for Audi and VW platforms. These camber plates were co-developed with Ground Control and have been tested and proven on street cars under some of the most grueling conditions such as on our 2017 Audi RS3 as featured here in One Lap of America.The Ground Control STREET/SPORT plate, a special version of our camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for over 3 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL.Configuration options include 2.25", 2.50", 60mm or Stock springs, low profile dome or standard dome plates and a Poly spring bushing.*Subframe and chassis variations affect total camber gain**The included Ground Control nut must be used with these camber plates!**u00a0 4468575666199 4468575666199_31600771792919 Audi RS3 Camber Plates ccpmk7 https://hinzmotorsport.com/products/audi-rs3-camber-plates Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/MK7VW_AudiCamberPlates.jpg?v=1598446568 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 Koni 2.50" (with poly insert) Low Profile Dome449.00 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/NewCamberPlate.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125625-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125723-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/BlackandWhite.jpg?v=1598446578 Audi 8S (TT, TTS, TTRS) 8V (A3, S3, RS3) Camber Caster PlatesWe are pleased to announce that we now carry Ground Control Suspension Products for Audi and VW platforms. These camber plates were co-developed with Ground Control and have been tested and proven on street cars under some of the most grueling conditions such as on our 2017 Audi RS3 as featured here in One Lap of America.The Ground Control STREET/SPORT plate, a special version of our camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for over 3 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL.Configuration options include 2.25", 2.50", 60mm or Stock springs, low profile dome or standard dome plates and a Poly spring bushing.*Subframe and chassis variations affect total camber gain**The included Ground Control nut must be used with these camber plates!**u00a0 4468575666199 4468575666199_31591707541527 Audi RS3 Camber Plates ccpmk7 https://hinzmotorsport.com/products/audi-rs3-camber-plates Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/MK7VW_AudiCamberPlates.jpg?v=1598446568 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 MCS Stock Standard Dome449.00 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/NewCamberPlate.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125625-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125723-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/BlackandWhite.jpg?v=1598446578 Audi 8S (TT, TTS, TTRS) 8V (A3, S3, RS3) Camber Caster PlatesWe are pleased to announce that we now carry Ground Control Suspension Products for Audi and VW platforms. These camber plates were co-developed with Ground Control and have been tested and proven on street cars under some of the most grueling conditions such as on our 2017 Audi RS3 as featured here in One Lap of America.The Ground Control STREET/SPORT plate, a special version of our camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for over 3 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL.Configuration options include 2.25", 2.50", 60mm or Stock springs, low profile dome or standard dome plates and a Poly spring bushing.*Subframe and chassis variations affect total camber gain**The included Ground Control nut must be used with these camber plates!**u00a0 4468575666199 4468575666199_31599345270807 Audi RS3 Camber Plates ccpmk7 https://hinzmotorsport.com/products/audi-rs3-camber-plates Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/MK7VW_AudiCamberPlates.jpg?v=1598446568 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 MCS Stock Low Profile Dome449.00 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/NewCamberPlate.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125625-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125723-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/BlackandWhite.jpg?v=1598446578 Audi 8S (TT, TTS, TTRS) 8V (A3, S3, RS3) Camber Caster PlatesWe are pleased to announce that we now carry Ground Control Suspension Products for Audi and VW platforms. These camber plates were co-developed with Ground Control and have been tested and proven on street cars under some of the most grueling conditions such as on our 2017 Audi RS3 as featured here in One Lap of America.The Ground Control STREET/SPORT plate, a special version of our camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for over 3 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL.Configuration options include 2.25", 2.50", 60mm or Stock springs, low profile dome or standard dome plates and a Poly spring bushing.*Subframe and chassis variations affect total camber gain**The included Ground Control nut must be used with these camber plates!**u00a0 4468575666199 4468575666199_31591707443223 Audi RS3 Camber Plates ccpmk7 https://hinzmotorsport.com/products/audi-rs3-camber-plates Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/MK7VW_AudiCamberPlates.jpg?v=1598446568 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 MCS 2.25" Standard Dome449.00 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/NewCamberPlate.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125625-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125723-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/BlackandWhite.jpg?v=1598446578 Audi 8S (TT, TTS, TTRS) 8V (A3, S3, RS3) Camber Caster PlatesWe are pleased to announce that we now carry Ground Control Suspension Products for Audi and VW platforms. These camber plates were co-developed with Ground Control and have been tested and proven on street cars under some of the most grueling conditions such as on our 2017 Audi RS3 as featured here in One Lap of America.The Ground Control STREET/SPORT plate, a special version of our camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for over 3 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL.Configuration options include 2.25", 2.50", 60mm or Stock springs, low profile dome or standard dome plates and a Poly spring bushing.*Subframe and chassis variations affect total camber gain**The included Ground Control nut must be used with these camber plates!**u00a0 4468575666199 4468575666199_31599344844823 Audi RS3 Camber Plates ccpmk7 https://hinzmotorsport.com/products/audi-rs3-camber-plates Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/MK7VW_AudiCamberPlates.jpg?v=1598446568 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 MCS 2.25" Low Profile Dome449.00 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/NewCamberPlate.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125625-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125723-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/BlackandWhite.jpg?v=1598446578 Audi 8S (TT, TTS, TTRS) 8V (A3, S3, RS3) Camber Caster PlatesWe are pleased to announce that we now carry Ground Control Suspension Products for Audi and VW platforms. These camber plates were co-developed with Ground Control and have been tested and proven on street cars under some of the most grueling conditions such as on our 2017 Audi RS3 as featured here in One Lap of America.The Ground Control STREET/SPORT plate, a special version of our camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for over 3 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL.Configuration options include 2.25", 2.50", 60mm or Stock springs, low profile dome or standard dome plates and a Poly spring bushing.*Subframe and chassis variations affect total camber gain**The included Ground Control nut must be used with these camber plates!**u00a0 4468575666199 4468575666199_31591707508759 Audi RS3 Camber Plates ccpmk7 https://hinzmotorsport.com/products/audi-rs3-camber-plates Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/MK7VW_AudiCamberPlates.jpg?v=1598446568 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 MCS 60mm Standard Dome449.00 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/NewCamberPlate.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125625-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125723-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/BlackandWhite.jpg?v=1598446578 Audi 8S (TT, TTS, TTRS) 8V (A3, S3, RS3) Camber Caster PlatesWe are pleased to announce that we now carry Ground Control Suspension Products for Audi and VW platforms. These camber plates were co-developed with Ground Control and have been tested and proven on street cars under some of the most grueling conditions such as on our 2017 Audi RS3 as featured here in One Lap of America.The Ground Control STREET/SPORT plate, a special version of our camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for over 3 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL.Configuration options include 2.25", 2.50", 60mm or Stock springs, low profile dome or standard dome plates and a Poly spring bushing.*Subframe and chassis variations affect total camber gain**The included Ground Control nut must be used with these camber plates!**u00a0 4468575666199 4468575666199_31599344910359 Audi RS3 Camber Plates ccpmk7 https://hinzmotorsport.com/products/audi-rs3-camber-plates Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/MK7VW_AudiCamberPlates.jpg?v=1598446568 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 MCS 60mm Low Profile Dome449.00 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/NewCamberPlate.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125625-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125723-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/BlackandWhite.jpg?v=1598446578 Audi 8S (TT, TTS, TTRS) 8V (A3, S3, RS3) Camber Caster PlatesWe are pleased to announce that we now carry Ground Control Suspension Products for Audi and VW platforms. These camber plates were co-developed with Ground Control and have been tested and proven on street cars under some of the most grueling conditions such as on our 2017 Audi RS3 as featured here in One Lap of America.The Ground Control STREET/SPORT plate, a special version of our camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for over 3 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL.Configuration options include 2.25", 2.50", 60mm or Stock springs, low profile dome or standard dome plates and a Poly spring bushing.*Subframe and chassis variations affect total camber gain**The included Ground Control nut must be used with these camber plates!**u00a0 4468575666199 4468575666199_31591707475991 Audi RS3 Camber Plates ccpmk7 https://hinzmotorsport.com/products/audi-rs3-camber-plates Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/MK7VW_AudiCamberPlates.jpg?v=1598446568 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 MCS 2.50" (no poly insert) Standard Dome449.00 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/NewCamberPlate.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125625-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125723-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/BlackandWhite.jpg?v=1598446578 Audi 8S (TT, TTS, TTRS) 8V (A3, S3, RS3) Camber Caster PlatesWe are pleased to announce that we now carry Ground Control Suspension Products for Audi and VW platforms. These camber plates were co-developed with Ground Control and have been tested and proven on street cars under some of the most grueling conditions such as on our 2017 Audi RS3 as featured here in One Lap of America.The Ground Control STREET/SPORT plate, a special version of our camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for over 3 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL.Configuration options include 2.25", 2.50", 60mm or Stock springs, low profile dome or standard dome plates and a Poly spring bushing.*Subframe and chassis variations affect total camber gain**The included Ground Control nut must be used with these camber plates!**u00a0 4468575666199 4468575666199_31599344877591 Audi RS3 Camber Plates ccpmk7 https://hinzmotorsport.com/products/audi-rs3-camber-plates Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/MK7VW_AudiCamberPlates.jpg?v=1598446568 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 MCS 2.50" (no poly insert) Low Profile Dome449.00 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/NewCamberPlate.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125625-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125723-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/BlackandWhite.jpg?v=1598446578 Audi 8S (TT, TTS, TTRS) 8V (A3, S3, RS3) Camber Caster PlatesWe are pleased to announce that we now carry Ground Control Suspension Products for Audi and VW platforms. These camber plates were co-developed with Ground Control and have been tested and proven on street cars under some of the most grueling conditions such as on our 2017 Audi RS3 as featured here in One Lap of America.The Ground Control STREET/SPORT plate, a special version of our camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for over 3 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL.Configuration options include 2.25", 2.50", 60mm or Stock springs, low profile dome or standard dome plates and a Poly spring bushing.*Subframe and chassis variations affect total camber gain**The included Ground Control nut must be used with these camber plates!**u00a0 4468575666199 4468575666199_31600769531927 Audi RS3 Camber Plates ccpmk7 https://hinzmotorsport.com/products/audi-rs3-camber-plates Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/MK7VW_AudiCamberPlates.jpg?v=1598446568 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 MCS 2.50" (with poly insert) Standard Dome449.00 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/NewCamberPlate.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125625-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125723-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/BlackandWhite.jpg?v=1598446578 Audi 8S (TT, TTS, TTRS) 8V (A3, S3, RS3) Camber Caster PlatesWe are pleased to announce that we now carry Ground Control Suspension Products for Audi and VW platforms. These camber plates were co-developed with Ground Control and have been tested and proven on street cars under some of the most grueling conditions such as on our 2017 Audi RS3 as featured here in One Lap of America.The Ground Control STREET/SPORT plate, a special version of our camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for over 3 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL.Configuration options include 2.25", 2.50", 60mm or Stock springs, low profile dome or standard dome plates and a Poly spring bushing.*Subframe and chassis variations affect total camber gain**The included Ground Control nut must be used with these camber plates!**u00a0 4468575666199 4468575666199_31600771891223 Audi RS3 Camber Plates ccpmk7 https://hinzmotorsport.com/products/audi-rs3-camber-plates Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/MK7VW_AudiCamberPlates.jpg?v=1598446568 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 MCS 2.50" (with poly insert) Low Profile Dome449.00 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/NewCamberPlate.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125625-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125723-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/BlackandWhite.jpg?v=1598446578 Audi 8S (TT, TTS, TTRS) 8V (A3, S3, RS3) Camber Caster PlatesWe are pleased to announce that we now carry Ground Control Suspension Products for Audi and VW platforms. These camber plates were co-developed with Ground Control and have been tested and proven on street cars under some of the most grueling conditions such as on our 2017 Audi RS3 as featured here in One Lap of America.The Ground Control STREET/SPORT plate, a special version of our camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for over 3 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL.Configuration options include 2.25", 2.50", 60mm or Stock springs, low profile dome or standard dome plates and a Poly spring bushing.*Subframe and chassis variations affect total camber gain**The included Ground Control nut must be used with these camber plates!**u00a0 4468575666199 4468575666199_31591707934743 Audi RS3 Camber Plates ccpmk7 https://hinzmotorsport.com/products/audi-rs3-camber-plates Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/MK7VW_AudiCamberPlates.jpg?v=1598446568 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 Ohlins Stock Standard Dome449.00 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/NewCamberPlate.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125625-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125723-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/BlackandWhite.jpg?v=1598446578 Audi 8S (TT, TTS, TTRS) 8V (A3, S3, RS3) Camber Caster PlatesWe are pleased to announce that we now carry Ground Control Suspension Products for Audi and VW platforms. These camber plates were co-developed with Ground Control and have been tested and proven on street cars under some of the most grueling conditions such as on our 2017 Audi RS3 as featured here in One Lap of America.The Ground Control STREET/SPORT plate, a special version of our camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for over 3 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL.Configuration options include 2.25", 2.50", 60mm or Stock springs, low profile dome or standard dome plates and a Poly spring bushing.*Subframe and chassis variations affect total camber gain**The included Ground Control nut must be used with these camber plates!**u00a0 4468575666199 4468575666199_31599346909207 Audi RS3 Camber Plates ccpmk7 https://hinzmotorsport.com/products/audi-rs3-camber-plates Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/MK7VW_AudiCamberPlates.jpg?v=1598446568 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 Ohlins Stock Low Profile Dome449.00 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/NewCamberPlate.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125625-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125723-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/BlackandWhite.jpg?v=1598446578 Audi 8S (TT, TTS, TTRS) 8V (A3, S3, RS3) Camber Caster PlatesWe are pleased to announce that we now carry Ground Control Suspension Products for Audi and VW platforms. These camber plates were co-developed with Ground Control and have been tested and proven on street cars under some of the most grueling conditions such as on our 2017 Audi RS3 as featured here in One Lap of America.The Ground Control STREET/SPORT plate, a special version of our camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for over 3 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL.Configuration options include 2.25", 2.50", 60mm or Stock springs, low profile dome or standard dome plates and a Poly spring bushing.*Subframe and chassis variations affect total camber gain**The included Ground Control nut must be used with these camber plates!**u00a0 4468575666199 4468575666199_31591707836439 Audi RS3 Camber Plates ccpmk7 https://hinzmotorsport.com/products/audi-rs3-camber-plates Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/MK7VW_AudiCamberPlates.jpg?v=1598446568 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 Ohlins 2.25" Standard Dome449.00 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/NewCamberPlate.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125625-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125723-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/BlackandWhite.jpg?v=1598446578 Audi 8S (TT, TTS, TTRS) 8V (A3, S3, RS3) Camber Caster PlatesWe are pleased to announce that we now carry Ground Control Suspension Products for Audi and VW platforms. These camber plates were co-developed with Ground Control and have been tested and proven on street cars under some of the most grueling conditions such as on our 2017 Audi RS3 as featured here in One Lap of America.The Ground Control STREET/SPORT plate, a special version of our camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for over 3 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL.Configuration options include 2.25", 2.50", 60mm or Stock springs, low profile dome or standard dome plates and a Poly spring bushing.*Subframe and chassis variations affect total camber gain**The included Ground Control nut must be used with these camber plates!**u00a0 4468575666199 4468575666199_31599346548759 Audi RS3 Camber Plates ccpmk7 https://hinzmotorsport.com/products/audi-rs3-camber-plates Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/MK7VW_AudiCamberPlates.jpg?v=1598446568 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 Ohlins 2.25" Low Profile Dome449.00 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/NewCamberPlate.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125625-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125723-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/BlackandWhite.jpg?v=1598446578 Audi 8S (TT, TTS, TTRS) 8V (A3, S3, RS3) Camber Caster PlatesWe are pleased to announce that we now carry Ground Control Suspension Products for Audi and VW platforms. These camber plates were co-developed with Ground Control and have been tested and proven on street cars under some of the most grueling conditions such as on our 2017 Audi RS3 as featured here in One Lap of America.The Ground Control STREET/SPORT plate, a special version of our camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for over 3 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL.Configuration options include 2.25", 2.50", 60mm or Stock springs, low profile dome or standard dome plates and a Poly spring bushing.*Subframe and chassis variations affect total camber gain**The included Ground Control nut must be used with these camber plates!**u00a0 4468575666199 4468575666199_31591707901975 Audi RS3 Camber Plates ccpmk7 https://hinzmotorsport.com/products/audi-rs3-camber-plates Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/MK7VW_AudiCamberPlates.jpg?v=1598446568 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 Ohlins 60mm Standard Dome449.00 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/NewCamberPlate.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125625-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125723-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/BlackandWhite.jpg?v=1598446578 Audi 8S (TT, TTS, TTRS) 8V (A3, S3, RS3) Camber Caster PlatesWe are pleased to announce that we now carry Ground Control Suspension Products for Audi and VW platforms. These camber plates were co-developed with Ground Control and have been tested and proven on street cars under some of the most grueling conditions such as on our 2017 Audi RS3 as featured here in One Lap of America.The Ground Control STREET/SPORT plate, a special version of our camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for over 3 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL.Configuration options include 2.25", 2.50", 60mm or Stock springs, low profile dome or standard dome plates and a Poly spring bushing.*Subframe and chassis variations affect total camber gain**The included Ground Control nut must be used with these camber plates!**u00a0 4468575666199 4468575666199_31599346647063 Audi RS3 Camber Plates ccpmk7 https://hinzmotorsport.com/products/audi-rs3-camber-plates Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/MK7VW_AudiCamberPlates.jpg?v=1598446568 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 Ohlins 60mm Low Profile Dome449.00 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/NewCamberPlate.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125625-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125723-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/BlackandWhite.jpg?v=1598446578 Audi 8S (TT, TTS, TTRS) 8V (A3, S3, RS3) Camber Caster PlatesWe are pleased to announce that we now carry Ground Control Suspension Products for Audi and VW platforms. These camber plates were co-developed with Ground Control and have been tested and proven on street cars under some of the most grueling conditions such as on our 2017 Audi RS3 as featured here in One Lap of America.The Ground Control STREET/SPORT plate, a special version of our camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for over 3 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL.Configuration options include 2.25", 2.50", 60mm or Stock springs, low profile dome or standard dome plates and a Poly spring bushing.*Subframe and chassis variations affect total camber gain**The included Ground Control nut must be used with these camber plates!**u00a0 4468575666199 4468575666199_31591707869207 Audi RS3 Camber Plates ccpmk7 https://hinzmotorsport.com/products/audi-rs3-camber-plates Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/MK7VW_AudiCamberPlates.jpg?v=1598446568 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 Ohlins 2.50" (no poly insert) Standard Dome449.00 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/NewCamberPlate.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125625-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125723-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/BlackandWhite.jpg?v=1598446578 Audi 8S (TT, TTS, TTRS) 8V (A3, S3, RS3) Camber Caster PlatesWe are pleased to announce that we now carry Ground Control Suspension Products for Audi and VW platforms. These camber plates were co-developed with Ground Control and have been tested and proven on street cars under some of the most grueling conditions such as on our 2017 Audi RS3 as featured here in One Lap of America.The Ground Control STREET/SPORT plate, a special version of our camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for over 3 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL.Configuration options include 2.25", 2.50", 60mm or Stock springs, low profile dome or standard dome plates and a Poly spring bushing.*Subframe and chassis variations affect total camber gain**The included Ground Control nut must be used with these camber plates!**u00a0 4468575666199 4468575666199_31599346581527 Audi RS3 Camber Plates ccpmk7 https://hinzmotorsport.com/products/audi-rs3-camber-plates Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/MK7VW_AudiCamberPlates.jpg?v=1598446568 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 Ohlins 2.50" (no poly insert) Low Profile Dome449.00 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/NewCamberPlate.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125625-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125723-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/BlackandWhite.jpg?v=1598446578 Audi 8S (TT, TTS, TTRS) 8V (A3, S3, RS3) Camber Caster PlatesWe are pleased to announce that we now carry Ground Control Suspension Products for Audi and VW platforms. These camber plates were co-developed with Ground Control and have been tested and proven on street cars under some of the most grueling conditions such as on our 2017 Audi RS3 as featured here in One Lap of America.The Ground Control STREET/SPORT plate, a special version of our camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for over 3 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL.Configuration options include 2.25", 2.50", 60mm or Stock springs, low profile dome or standard dome plates and a Poly spring bushing.*Subframe and chassis variations affect total camber gain**The included Ground Control nut must be used with these camber plates!**u00a0 4468575666199 4468575666199_31600769630231 Audi RS3 Camber Plates ccpmk7 https://hinzmotorsport.com/products/audi-rs3-camber-plates Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/MK7VW_AudiCamberPlates.jpg?v=1598446568 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 Ohlins 2.50" (with poly insert) Standard Dome449.00 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/NewCamberPlate.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125625-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125723-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/BlackandWhite.jpg?v=1598446578 Audi 8S (TT, TTS, TTRS) 8V (A3, S3, RS3) Camber Caster PlatesWe are pleased to announce that we now carry Ground Control Suspension Products for Audi and VW platforms. These camber plates were co-developed with Ground Control and have been tested and proven on street cars under some of the most grueling conditions such as on our 2017 Audi RS3 as featured here in One Lap of America.The Ground Control STREET/SPORT plate, a special version of our camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for over 3 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL.Configuration options include 2.25", 2.50", 60mm or Stock springs, low profile dome or standard dome plates and a Poly spring bushing.*Subframe and chassis variations affect total camber gain**The included Ground Control nut must be used with these camber plates!**u00a0 4468575666199 4468575666199_31600771989527 Audi RS3 Camber Plates ccpmk7 https://hinzmotorsport.com/products/audi-rs3-camber-plates Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/MK7VW_AudiCamberPlates.jpg?v=1598446568 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 Ohlins 2.50" (with poly insert) Low Profile Dome449.00 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/NewCamberPlate.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125625-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125723-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/BlackandWhite.jpg?v=1598446578 Audi 8S (TT, TTS, TTRS) 8V (A3, S3, RS3) Camber Caster PlatesWe are pleased to announce that we now carry Ground Control Suspension Products for Audi and VW platforms. These camber plates were co-developed with Ground Control and have been tested and proven on street cars under some of the most grueling conditions such as on our 2017 Audi RS3 as featured here in One Lap of America.The Ground Control STREET/SPORT plate, a special version of our camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for over 3 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL.Configuration options include 2.25", 2.50", 60mm or Stock springs, low profile dome or standard dome plates and a Poly spring bushing.*Subframe and chassis variations affect total camber gain**The included Ground Control nut must be used with these camber plates!**u00a0 4468575666199 4468575666199_31603696042007 Audi RS3 Camber Plates ccpmk7 https://hinzmotorsport.com/products/audi-rs3-camber-plates Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/MK7VW_AudiCamberPlates.jpg?v=1598446568 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 Ultimate Performance / JRI Stock Standard Dome449.00 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/NewCamberPlate.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125625-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125723-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/BlackandWhite.jpg?v=1598446578 Audi 8S (TT, TTS, TTRS) 8V (A3, S3, RS3) Camber Caster PlatesWe are pleased to announce that we now carry Ground Control Suspension Products for Audi and VW platforms. These camber plates were co-developed with Ground Control and have been tested and proven on street cars under some of the most grueling conditions such as on our 2017 Audi RS3 as featured here in One Lap of America.The Ground Control STREET/SPORT plate, a special version of our camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for over 3 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL.Configuration options include 2.25", 2.50", 60mm or Stock springs, low profile dome or standard dome plates and a Poly spring bushing.*Subframe and chassis variations affect total camber gain**The included Ground Control nut must be used with these camber plates!**u00a0 4468575666199 4468575666199_31603699384343 Audi RS3 Camber Plates ccpmk7 https://hinzmotorsport.com/products/audi-rs3-camber-plates Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/MK7VW_AudiCamberPlates.jpg?v=1598446568 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 Ultimate Performance / JRI Stock Low Profile Dome449.00 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/NewCamberPlate.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125625-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125723-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/BlackandWhite.jpg?v=1598446578 Audi 8S (TT, TTS, TTRS) 8V (A3, S3, RS3) Camber Caster PlatesWe are pleased to announce that we now carry Ground Control Suspension Products for Audi and VW platforms. These camber plates were co-developed with Ground Control and have been tested and proven on street cars under some of the most grueling conditions such as on our 2017 Audi RS3 as featured here in One Lap of America.The Ground Control STREET/SPORT plate, a special version of our camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for over 3 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL.Configuration options include 2.25", 2.50", 60mm or Stock springs, low profile dome or standard dome plates and a Poly spring bushing.*Subframe and chassis variations affect total camber gain**The included Ground Control nut must be used with these camber plates!**u00a0 4468575666199 4468575666199_31603697680407 Audi RS3 Camber Plates ccpmk7 https://hinzmotorsport.com/products/audi-rs3-camber-plates Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/MK7VW_AudiCamberPlates.jpg?v=1598446568 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 Ultimate Performance / JRI 2.25" Standard Dome449.00 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/NewCamberPlate.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125625-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125723-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/BlackandWhite.jpg?v=1598446578 Audi 8S (TT, TTS, TTRS) 8V (A3, S3, RS3) Camber Caster PlatesWe are pleased to announce that we now carry Ground Control Suspension Products for Audi and VW platforms. These camber plates were co-developed with Ground Control and have been tested and proven on street cars under some of the most grueling conditions such as on our 2017 Audi RS3 as featured here in One Lap of America.The Ground Control STREET/SPORT plate, a special version of our camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for over 3 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL.Configuration options include 2.25", 2.50", 60mm or Stock springs, low profile dome or standard dome plates and a Poly spring bushing.*Subframe and chassis variations affect total camber gain**The included Ground Control nut must be used with these camber plates!**u00a0 4468575666199 4468575666199_31603699515415 Audi RS3 Camber Plates ccpmk7 https://hinzmotorsport.com/products/audi-rs3-camber-plates Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/MK7VW_AudiCamberPlates.jpg?v=1598446568 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 Ultimate Performance / JRI 2.25" Low Profile Dome449.00 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/NewCamberPlate.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125625-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125723-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/BlackandWhite.jpg?v=1598446578 Audi 8S (TT, TTS, TTRS) 8V (A3, S3, RS3) Camber Caster PlatesWe are pleased to announce that we now carry Ground Control Suspension Products for Audi and VW platforms. These camber plates were co-developed with Ground Control and have been tested and proven on street cars under some of the most grueling conditions such as on our 2017 Audi RS3 as featured here in One Lap of America.The Ground Control STREET/SPORT plate, a special version of our camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for over 3 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL.Configuration options include 2.25", 2.50", 60mm or Stock springs, low profile dome or standard dome plates and a Poly spring bushing.*Subframe and chassis variations affect total camber gain**The included Ground Control nut must be used with these camber plates!**u00a0 4468575666199 4468575666199_31603698008087 Audi RS3 Camber Plates ccpmk7 https://hinzmotorsport.com/products/audi-rs3-camber-plates Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/MK7VW_AudiCamberPlates.jpg?v=1598446568 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 Ultimate Performance / JRI 60mm Standard Dome449.00 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/NewCamberPlate.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125625-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125723-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/BlackandWhite.jpg?v=1598446578 Audi 8S (TT, TTS, TTRS) 8V (A3, S3, RS3) Camber Caster PlatesWe are pleased to announce that we now carry Ground Control Suspension Products for Audi and VW platforms. These camber plates were co-developed with Ground Control and have been tested and proven on street cars under some of the most grueling conditions such as on our 2017 Audi RS3 as featured here in One Lap of America.The Ground Control STREET/SPORT plate, a special version of our camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for over 3 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL.Configuration options include 2.25", 2.50", 60mm or Stock springs, low profile dome or standard dome plates and a Poly spring bushing.*Subframe and chassis variations affect total camber gain**The included Ground Control nut must be used with these camber plates!**u00a0 4468575666199 4468575666199_31603699875863 Audi RS3 Camber Plates ccpmk7 https://hinzmotorsport.com/products/audi-rs3-camber-plates Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/MK7VW_AudiCamberPlates.jpg?v=1598446568 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 Ultimate Performance / JRI 60mm Low Profile Dome449.00 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/NewCamberPlate.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125625-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125723-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/BlackandWhite.jpg?v=1598446578 Audi 8S (TT, TTS, TTRS) 8V (A3, S3, RS3) Camber Caster PlatesWe are pleased to announce that we now carry Ground Control Suspension Products for Audi and VW platforms. These camber plates were co-developed with Ground Control and have been tested and proven on street cars under some of the most grueling conditions such as on our 2017 Audi RS3 as featured here in One Lap of America.The Ground Control STREET/SPORT plate, a special version of our camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for over 3 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL.Configuration options include 2.25", 2.50", 60mm or Stock springs, low profile dome or standard dome plates and a Poly spring bushing.*Subframe and chassis variations affect total camber gain**The included Ground Control nut must be used with these camber plates!**u00a0 4468575666199 4468575666199_31603698597911 Audi RS3 Camber Plates ccpmk7 https://hinzmotorsport.com/products/audi-rs3-camber-plates Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/MK7VW_AudiCamberPlates.jpg?v=1598446568 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 Ultimate Performance / JRI 2.50" (no poly insert) Standard Dome449.00 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/NewCamberPlate.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125625-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125723-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/BlackandWhite.jpg?v=1598446578 Audi 8S (TT, TTS, TTRS) 8V (A3, S3, RS3) Camber Caster PlatesWe are pleased to announce that we now carry Ground Control Suspension Products for Audi and VW platforms. These camber plates were co-developed with Ground Control and have been tested and proven on street cars under some of the most grueling conditions such as on our 2017 Audi RS3 as featured here in One Lap of America.The Ground Control STREET/SPORT plate, a special version of our camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for over 3 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL.Configuration options include 2.25", 2.50", 60mm or Stock springs, low profile dome or standard dome plates and a Poly spring bushing.*Subframe and chassis variations affect total camber gain**The included Ground Control nut must be used with these camber plates!**u00a0 4468575666199 4468575666199_31603700138007 Audi RS3 Camber Plates ccpmk7 https://hinzmotorsport.com/products/audi-rs3-camber-plates Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/MK7VW_AudiCamberPlates.jpg?v=1598446568 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 Ultimate Performance / JRI 2.50" (no poly insert) Low Profile Dome449.00 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/NewCamberPlate.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125625-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125723-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/BlackandWhite.jpg?v=1598446578 Audi 8S (TT, TTS, TTRS) 8V (A3, S3, RS3) Camber Caster PlatesWe are pleased to announce that we now carry Ground Control Suspension Products for Audi and VW platforms. These camber plates were co-developed with Ground Control and have been tested and proven on street cars under some of the most grueling conditions such as on our 2017 Audi RS3 as featured here in One Lap of America.The Ground Control STREET/SPORT plate, a special version of our camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for over 3 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL.Configuration options include 2.25", 2.50", 60mm or Stock springs, low profile dome or standard dome plates and a Poly spring bushing.*Subframe and chassis variations affect total camber gain**The included Ground Control nut must be used with these camber plates!**u00a0 4468575666199 4468575666199_31603698794519 Audi RS3 Camber Plates ccpmk7 https://hinzmotorsport.com/products/audi-rs3-camber-plates Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/MK7VW_AudiCamberPlates.jpg?v=1598446568 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 Ultimate Performance / JRI 2.50" (with poly insert) Standard Dome449.00 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/NewCamberPlate.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125625-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125723-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/BlackandWhite.jpg?v=1598446578 Audi 8S (TT, TTS, TTRS) 8V (A3, S3, RS3) Camber Caster PlatesWe are pleased to announce that we now carry Ground Control Suspension Products for Audi and VW platforms. These camber plates were co-developed with Ground Control and have been tested and proven on street cars under some of the most grueling conditions such as on our 2017 Audi RS3 as featured here in One Lap of America.The Ground Control STREET/SPORT plate, a special version of our camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for over 3 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL.Configuration options include 2.25", 2.50", 60mm or Stock springs, low profile dome or standard dome plates and a Poly spring bushing.*Subframe and chassis variations affect total camber gain**The included Ground Control nut must be used with these camber plates!**u00a0 4468575666199 4468575666199_31603700498455 Audi RS3 Camber Plates ccpmk7 https://hinzmotorsport.com/products/audi-rs3-camber-plates Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/MK7VW_AudiCamberPlates.jpg?v=1598446568 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 Ultimate Performance / JRI 2.50" (with poly insert) Low Profile Dome449.00 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/NewCamberPlate.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125625-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125723-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/BlackandWhite.jpg?v=1598446578 Audi 8S (TT, TTS, TTRS) 8V (A3, S3, RS3) Camber Caster PlatesWe are pleased to announce that we now carry Ground Control Suspension Products for Audi and VW platforms. These camber plates were co-developed with Ground Control and have been tested and proven on street cars under some of the most grueling conditions such as on our 2017 Audi RS3 as featured here in One Lap of America.The Ground Control STREET/SPORT plate, a special version of our camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for over 3 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL.Configuration options include 2.25", 2.50", 60mm or Stock springs, low profile dome or standard dome plates and a Poly spring bushing.*Subframe and chassis variations affect total camber gain**The included Ground Control nut must be used with these camber plates!**u00a0 4468575666199 4468575666199_31600766812183 Audi RS3 Camber Plates ccpmk7 https://hinzmotorsport.com/products/audi-rs3-camber-plates Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/MK7VW_AudiCamberPlates.jpg?v=1598446568 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 Other (Write under "Notes" section in shopping cart) Stock Standard Dome449.00 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/NewCamberPlate.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125625-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125723-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/BlackandWhite.jpg?v=1598446578 Audi 8S (TT, TTS, TTRS) 8V (A3, S3, RS3) Camber Caster PlatesWe are pleased to announce that we now carry Ground Control Suspension Products for Audi and VW platforms. These camber plates were co-developed with Ground Control and have been tested and proven on street cars under some of the most grueling conditions such as on our 2017 Audi RS3 as featured here in One Lap of America.The Ground Control STREET/SPORT plate, a special version of our camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for over 3 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL.Configuration options include 2.25", 2.50", 60mm or Stock springs, low profile dome or standard dome plates and a Poly spring bushing.*Subframe and chassis variations affect total camber gain**The included Ground Control nut must be used with these camber plates!**u00a0 4468575666199 4468575666199_31600766976023 Audi RS3 Camber Plates ccpmk7 https://hinzmotorsport.com/products/audi-rs3-camber-plates Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/MK7VW_AudiCamberPlates.jpg?v=1598446568 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 Other (Write under "Notes" section in shopping cart) Stock Low Profile Dome449.00 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/NewCamberPlate.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125625-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125723-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/BlackandWhite.jpg?v=1598446578 Audi 8S (TT, TTS, TTRS) 8V (A3, S3, RS3) Camber Caster PlatesWe are pleased to announce that we now carry Ground Control Suspension Products for Audi and VW platforms. These camber plates were co-developed with Ground Control and have been tested and proven on street cars under some of the most grueling conditions such as on our 2017 Audi RS3 as featured here in One Lap of America.The Ground Control STREET/SPORT plate, a special version of our camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for over 3 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL.Configuration options include 2.25", 2.50", 60mm or Stock springs, low profile dome or standard dome plates and a Poly spring bushing.*Subframe and chassis variations affect total camber gain**The included Ground Control nut must be used with these camber plates!**u00a0 4468575666199 4468575666199_31600766517271 Audi RS3 Camber Plates ccpmk7 https://hinzmotorsport.com/products/audi-rs3-camber-plates Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/MK7VW_AudiCamberPlates.jpg?v=1598446568 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 Other (Write under "Notes" section in shopping cart) 2.25" Standard Dome449.00 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/NewCamberPlate.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125625-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125723-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/BlackandWhite.jpg?v=1598446578 Audi 8S (TT, TTS, TTRS) 8V (A3, S3, RS3) Camber Caster PlatesWe are pleased to announce that we now carry Ground Control Suspension Products for Audi and VW platforms. These camber plates were co-developed with Ground Control and have been tested and proven on street cars under some of the most grueling conditions such as on our 2017 Audi RS3 as featured here in One Lap of America.The Ground Control STREET/SPORT plate, a special version of our camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for over 3 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL.Configuration options include 2.25", 2.50", 60mm or Stock springs, low profile dome or standard dome plates and a Poly spring bushing.*Subframe and chassis variations affect total camber gain**The included Ground Control nut must be used with these camber plates!**u00a0 4468575666199 4468575666199_31600766550039 Audi RS3 Camber Plates ccpmk7 https://hinzmotorsport.com/products/audi-rs3-camber-plates Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/MK7VW_AudiCamberPlates.jpg?v=1598446568 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 Other (Write under "Notes" section in shopping cart) 2.25" Low Profile Dome449.00 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/NewCamberPlate.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125625-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125723-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/BlackandWhite.jpg?v=1598446578 Audi 8S (TT, TTS, TTRS) 8V (A3, S3, RS3) Camber Caster PlatesWe are pleased to announce that we now carry Ground Control Suspension Products for Audi and VW platforms. These camber plates were co-developed with Ground Control and have been tested and proven on street cars under some of the most grueling conditions such as on our 2017 Audi RS3 as featured here in One Lap of America.The Ground Control STREET/SPORT plate, a special version of our camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for over 3 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL.Configuration options include 2.25", 2.50", 60mm or Stock springs, low profile dome or standard dome plates and a Poly spring bushing.*Subframe and chassis variations affect total camber gain**The included Ground Control nut must be used with these camber plates!**u00a0 4468575666199 4468575666199_31600766648343 Audi RS3 Camber Plates ccpmk7 https://hinzmotorsport.com/products/audi-rs3-camber-plates Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/MK7VW_AudiCamberPlates.jpg?v=1598446568 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 Other (Write under "Notes" section in shopping cart) 60mm Standard Dome449.00 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/NewCamberPlate.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125625-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125723-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/BlackandWhite.jpg?v=1598446578 Audi 8S (TT, TTS, TTRS) 8V (A3, S3, RS3) Camber Caster PlatesWe are pleased to announce that we now carry Ground Control Suspension Products for Audi and VW platforms. These camber plates were co-developed with Ground Control and have been tested and proven on street cars under some of the most grueling conditions such as on our 2017 Audi RS3 as featured here in One Lap of America.The Ground Control STREET/SPORT plate, a special version of our camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for over 3 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL.Configuration options include 2.25", 2.50", 60mm or Stock springs, low profile dome or standard dome plates and a Poly spring bushing.*Subframe and chassis variations affect total camber gain**The included Ground Control nut must be used with these camber plates!**u00a0 4468575666199 4468575666199_31600766681111 Audi RS3 Camber Plates ccpmk7 https://hinzmotorsport.com/products/audi-rs3-camber-plates Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/MK7VW_AudiCamberPlates.jpg?v=1598446568 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 Other (Write under "Notes" section in shopping cart) 60mm Low Profile Dome449.00 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/NewCamberPlate.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125625-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125723-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/BlackandWhite.jpg?v=1598446578 Audi 8S (TT, TTS, TTRS) 8V (A3, S3, RS3) Camber Caster PlatesWe are pleased to announce that we now carry Ground Control Suspension Products for Audi and VW platforms. These camber plates were co-developed with Ground Control and have been tested and proven on street cars under some of the most grueling conditions such as on our 2017 Audi RS3 as featured here in One Lap of America.The Ground Control STREET/SPORT plate, a special version of our camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for over 3 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL.Configuration options include 2.25", 2.50", 60mm or Stock springs, low profile dome or standard dome plates and a Poly spring bushing.*Subframe and chassis variations affect total camber gain**The included Ground Control nut must be used with these camber plates!**u00a0 4468575666199 4468575666199_31600766582807 Audi RS3 Camber Plates ccpmk7 https://hinzmotorsport.com/products/audi-rs3-camber-plates Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/MK7VW_AudiCamberPlates.jpg?v=1598446568 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 Other (Write under "Notes" section in shopping cart) 2.50" (no poly insert) Standard Dome449.00 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/NewCamberPlate.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125625-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125723-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/BlackandWhite.jpg?v=1598446578 Audi 8S (TT, TTS, TTRS) 8V (A3, S3, RS3) Camber Caster PlatesWe are pleased to announce that we now carry Ground Control Suspension Products for Audi and VW platforms. These camber plates were co-developed with Ground Control and have been tested and proven on street cars under some of the most grueling conditions such as on our 2017 Audi RS3 as featured here in One Lap of America.The Ground Control STREET/SPORT plate, a special version of our camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for over 3 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL.Configuration options include 2.25", 2.50", 60mm or Stock springs, low profile dome or standard dome plates and a Poly spring bushing.*Subframe and chassis variations affect total camber gain**The included Ground Control nut must be used with these camber plates!**u00a0 4468575666199 4468575666199_31600766615575 Audi RS3 Camber Plates ccpmk7 https://hinzmotorsport.com/products/audi-rs3-camber-plates Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/MK7VW_AudiCamberPlates.jpg?v=1598446568 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 Other (Write under "Notes" section in shopping cart) 2.50" (no poly insert) Low Profile Dome449.00 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/NewCamberPlate.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125625-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125723-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/BlackandWhite.jpg?v=1598446578 Audi 8S (TT, TTS, TTRS) 8V (A3, S3, RS3) Camber Caster PlatesWe are pleased to announce that we now carry Ground Control Suspension Products for Audi and VW platforms. These camber plates were co-developed with Ground Control and have been tested and proven on street cars under some of the most grueling conditions such as on our 2017 Audi RS3 as featured here in One Lap of America.The Ground Control STREET/SPORT plate, a special version of our camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for over 3 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL.Configuration options include 2.25", 2.50", 60mm or Stock springs, low profile dome or standard dome plates and a Poly spring bushing.*Subframe and chassis variations affect total camber gain**The included Ground Control nut must be used with these camber plates!**u00a0 4468575666199 4468575666199_31600769662999 Audi RS3 Camber Plates ccpmk7 https://hinzmotorsport.com/products/audi-rs3-camber-plates Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/MK7VW_AudiCamberPlates.jpg?v=1598446568 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 Other (Write under "Notes" section in shopping cart) 2.50" (with poly insert) Standard Dome449.00 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/NewCamberPlate.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125625-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125723-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/BlackandWhite.jpg?v=1598446578 Audi 8S (TT, TTS, TTRS) 8V (A3, S3, RS3) Camber Caster PlatesWe are pleased to announce that we now carry Ground Control Suspension Products for Audi and VW platforms. These camber plates were co-developed with Ground Control and have been tested and proven on street cars under some of the most grueling conditions such as on our 2017 Audi RS3 as featured here in One Lap of America.The Ground Control STREET/SPORT plate, a special version of our camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for over 3 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL.Configuration options include 2.25", 2.50", 60mm or Stock springs, low profile dome or standard dome plates and a Poly spring bushing.*Subframe and chassis variations affect total camber gain**The included Ground Control nut must be used with these camber plates!**u00a0 4468575666199 4468575666199_31600772022295 Audi RS3 Camber Plates ccpmk7 https://hinzmotorsport.com/products/audi-rs3-camber-plates Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/MK7VW_AudiCamberPlates.jpg?v=1598446568 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 Other (Write under "Notes" section in shopping cart) 2.50" (with poly insert) Low Profile Dome449.00 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/NewCamberPlate.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125625-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/20200620_125723-Text.jpg?v=1598446578 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/BlackandWhite.jpg?v=1598446578 Audi 8S (TT, TTS, TTRS) 8V (A3, S3, RS3) Camber Caster PlatesWe are pleased to announce that we now carry Ground Control Suspension Products for Audi and VW platforms. These camber plates were co-developed with Ground Control and have been tested and proven on street cars under some of the most grueling conditions such as on our 2017 Audi RS3 as featured here in One Lap of America.The Ground Control STREET/SPORT plate, a special version of our camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for over 3 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL.Configuration options include 2.25", 2.50", 60mm or Stock springs, low profile dome or standard dome plates and a Poly spring bushing.*Subframe and chassis variations affect total camber gain**The included Ground Control nut must be used with these camber plates!**u00a0 1842025824290 1842025824290_16569550536738 AiM Solo 2 DL Laptimer AIM.S2.DL.OBD https://hinzmotorsport.com/products/aim-solo2-dl AiM Technologies https://cdn.shopify.com/s/files/1/0045/1179/3186/products/AiMSolo2DLofficialphoto2.jpg?v=1599847143 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/AiMSolo2DLofficialphoto2.jpg?v=1599847190 true 1043 g 1 Solo 2 DL - OBDII 699.00 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/AiMSolo2DLofficialphoto1.jpg?v=1599847190 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/AiMSolo2DLofficialphoto3.jpg?v=1599847144 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/AiMSolo2DLofficialphoto4.jpg?v=1599847144 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/AiMSolo2DLofficialphoto5.jpg?v=1599847144 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/AiMSolo2DLofficialphoto6.jpg?v=1599847144 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/AiMSolo2DLofficialphoto7.jpg?v=1599847144 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/AiMSolo2DLofficialphoto8.jpg?v=1599847144 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/AiMSolo2andSolo2DLofficialphoto.jpg?v=1599847161 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/AiMSolo2DLwithlaptop.jpg?v=1599847178 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/AiMSolo2DLofficialphoto11.jpg?v=1599847178 The brand new GPS lap timers for motorsportsIntroducing the new AiM Solo 2 GPS lap timer. The new Solo 2 receives data from two satellite constellations: GPS and Glonass. This new approach over the traditional GPS method greatly improves the speed and precision of the old Solo lap timer. Lap times can now be calculated within a maximum error of 2/100 sec. Solo 2 has a database of over 2,000 tracks worldwide. As soon as the device is switched on, it identifies its position and recognizes the starting line coordinates of the track, and starts sampling lap times.For tracks not in the database, the Solo 2 device realizes this and switches to learning mode where it automatically understands the characteristics of the track and will provide accurate lap times anyway.The display can now be configured in 7 different colors.Configurable RGB LEDsThe LED's on either side of the screen built into the chassis are now also be configurable.Data recall on screenData can now also be recalled on the display right after your test without the need for a phone or PC.Wi-Fi Communication with the PCSolo 2 now communicates with your PC via Wi-Fi connection eliminating the need for cables when downloading lap data, managing the track database, or when configuring your Solo 2.Coming Soon: You will also be able to connect your iPhone to Solo 2 for track database management, data analysis, *or to even get a live view of the most important engine parameters you have selected*. *Solo 2 DL only, cables purchased separately*Solo 2 DL, the Solo with ECU connectionThe Solo 2 DL comes with an additional input jack which receives data from one of the three following sources of your choosing:OBD PortYou can plug the OBD cable directly into the 16-pin OBD port on vehicles from 1996 and newer. Please note that some earlier model OBDII systems communicate rather slowly and make this method of connection, less than ideal. More than 1,000 protocols for 1,000+ ECU in the database, for easily connect your Solo 2 DL to your Engine Control Unit and get a lot of information with just one cable. In case your ECU protocol is not in the database, no problem: an ECU Driver Builder is always available in the Race Studio 3 configuration software, and you will be able to create your protocol by yourself.Hardwire (CAN Stream) This is the best option if looking for a faster data feed and more available data options. Many older cars do not transmit specific data through the OBD port. One example would be that of the E46 M3, which does not provide throttle or steering position through the OBD port. This would significantly reduce the effectiveness of your data overlays for analysis thus making lap time improvements more trivial. Using the CAN option here would be better.This option while more time-consuming (and albeit more difficult) to install provides the best connection to your vehicle as once installed it is cleaner, faster, and provides more real-time data for you to analyze.Coil RPM Input Designed for pre-OBDII cars (1995 and older), this option simply connects to a spark plug wire or coil connector to read RPM data.Solo 2 DL now features a digital input allowing to log RPM either from square wave signals (8-50 V signal) or pulse signals (150-450 V ignition coil trigger - primary circuit).SmartyCam HD connection Combine your SmartyCam HD and ECU cables (sold separately) with your Solo2 DL and get all the data from your ECU, merge them with the GPS information and transmit everything to the SmartyCam HD, which will show them as a graphical overlay on your videos.These lap timers are feature-packed and simply awesome. It is no wonder AiM's lap timers have been finding their way into more and more customers track cars every event. You will not be disappointed with this lap timer! 1842025824290 1842025824290_29198422704162 AiM Solo 2 DL Laptimer AIM.S2.DL.CAN https://hinzmotorsport.com/products/aim-solo2-dl AiM Technologies https://cdn.shopify.com/s/files/1/0045/1179/3186/products/AiMSolo2DLofficialphoto2.jpg?v=1599847143 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/AiMSolo2DLofficialphoto1.jpg?v=1599847190 true 1043 g 1 Solo 2 DL - CAN 699.00 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/AiMSolo2DLofficialphoto1.jpg?v=1599847190 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/AiMSolo2DLofficialphoto3.jpg?v=1599847144 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/AiMSolo2DLofficialphoto4.jpg?v=1599847144 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/AiMSolo2DLofficialphoto5.jpg?v=1599847144 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/AiMSolo2DLofficialphoto6.jpg?v=1599847144 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/AiMSolo2DLofficialphoto7.jpg?v=1599847144 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/AiMSolo2DLofficialphoto8.jpg?v=1599847144 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/AiMSolo2andSolo2DLofficialphoto.jpg?v=1599847161 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/AiMSolo2DLwithlaptop.jpg?v=1599847178 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/AiMSolo2DLofficialphoto11.jpg?v=1599847178 The brand new GPS lap timers for motorsportsIntroducing the new AiM Solo 2 GPS lap timer. The new Solo 2 receives data from two satellite constellations: GPS and Glonass. This new approach over the traditional GPS method greatly improves the speed and precision of the old Solo lap timer. Lap times can now be calculated within a maximum error of 2/100 sec. Solo 2 has a database of over 2,000 tracks worldwide. As soon as the device is switched on, it identifies its position and recognizes the starting line coordinates of the track, and starts sampling lap times.For tracks not in the database, the Solo 2 device realizes this and switches to learning mode where it automatically understands the characteristics of the track and will provide accurate lap times anyway.The display can now be configured in 7 different colors.Configurable RGB LEDsThe LED's on either side of the screen built into the chassis are now also be configurable.Data recall on screenData can now also be recalled on the display right after your test without the need for a phone or PC.Wi-Fi Communication with the PCSolo 2 now communicates with your PC via Wi-Fi connection eliminating the need for cables when downloading lap data, managing the track database, or when configuring your Solo 2.Coming Soon: You will also be able to connect your iPhone to Solo 2 for track database management, data analysis, *or to even get a live view of the most important engine parameters you have selected*. *Solo 2 DL only, cables purchased separately*Solo 2 DL, the Solo with ECU connectionThe Solo 2 DL comes with an additional input jack which receives data from one of the three following sources of your choosing:OBD PortYou can plug the OBD cable directly into the 16-pin OBD port on vehicles from 1996 and newer. Please note that some earlier model OBDII systems communicate rather slowly and make this method of connection, less than ideal. More than 1,000 protocols for 1,000+ ECU in the database, for easily connect your Solo 2 DL to your Engine Control Unit and get a lot of information with just one cable. In case your ECU protocol is not in the database, no problem: an ECU Driver Builder is always available in the Race Studio 3 configuration software, and you will be able to create your protocol by yourself.Hardwire (CAN Stream) This is the best option if looking for a faster data feed and more available data options. Many older cars do not transmit specific data through the OBD port. One example would be that of the E46 M3, which does not provide throttle or steering position through the OBD port. This would significantly reduce the effectiveness of your data overlays for analysis thus making lap time improvements more trivial. Using the CAN option here would be better.This option while more time-consuming (and albeit more difficult) to install provides the best connection to your vehicle as once installed it is cleaner, faster, and provides more real-time data for you to analyze.Coil RPM Input Designed for pre-OBDII cars (1995 and older), this option simply connects to a spark plug wire or coil connector to read RPM data.Solo 2 DL now features a digital input allowing to log RPM either from square wave signals (8-50 V signal) or pulse signals (150-450 V ignition coil trigger - primary circuit).SmartyCam HD connection Combine your SmartyCam HD and ECU cables (sold separately) with your Solo2 DL and get all the data from your ECU, merge them with the GPS information and transmit everything to the SmartyCam HD, which will show them as a graphical overlay on your videos.These lap timers are feature-packed and simply awesome. It is no wonder AiM's lap timers have been finding their way into more and more customers track cars every event. You will not be disappointed with this lap timer! 1842025824290 1842025824290_29198424539170 AiM Solo 2 DL Laptimer AIM.S2.DL.RPM https://hinzmotorsport.com/products/aim-solo2-dl AiM Technologies https://cdn.shopify.com/s/files/1/0045/1179/3186/products/AiMSolo2DLofficialphoto2.jpg?v=1599847143 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/AiMSolo2DLofficialphoto3.jpg?v=1599847144 true 1043 g 1 Solo 2 DL - RPM Sensor 699.00 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/AiMSolo2DLofficialphoto1.jpg?v=1599847190 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/AiMSolo2DLofficialphoto3.jpg?v=1599847144 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/AiMSolo2DLofficialphoto4.jpg?v=1599847144 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/AiMSolo2DLofficialphoto5.jpg?v=1599847144 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/AiMSolo2DLofficialphoto6.jpg?v=1599847144 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/AiMSolo2DLofficialphoto7.jpg?v=1599847144 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/AiMSolo2DLofficialphoto8.jpg?v=1599847144 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/AiMSolo2andSolo2DLofficialphoto.jpg?v=1599847161 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/AiMSolo2DLwithlaptop.jpg?v=1599847178 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/AiMSolo2DLofficialphoto11.jpg?v=1599847178 The brand new GPS lap timers for motorsportsIntroducing the new AiM Solo 2 GPS lap timer. The new Solo 2 receives data from two satellite constellations: GPS and Glonass. This new approach over the traditional GPS method greatly improves the speed and precision of the old Solo lap timer. Lap times can now be calculated within a maximum error of 2/100 sec. Solo 2 has a database of over 2,000 tracks worldwide. As soon as the device is switched on, it identifies its position and recognizes the starting line coordinates of the track, and starts sampling lap times.For tracks not in the database, the Solo 2 device realizes this and switches to learning mode where it automatically understands the characteristics of the track and will provide accurate lap times anyway.The display can now be configured in 7 different colors.Configurable RGB LEDsThe LED's on either side of the screen built into the chassis are now also be configurable.Data recall on screenData can now also be recalled on the display right after your test without the need for a phone or PC.Wi-Fi Communication with the PCSolo 2 now communicates with your PC via Wi-Fi connection eliminating the need for cables when downloading lap data, managing the track database, or when configuring your Solo 2.Coming Soon: You will also be able to connect your iPhone to Solo 2 for track database management, data analysis, *or to even get a live view of the most important engine parameters you have selected*. *Solo 2 DL only, cables purchased separately*Solo 2 DL, the Solo with ECU connectionThe Solo 2 DL comes with an additional input jack which receives data from one of the three following sources of your choosing:OBD PortYou can plug the OBD cable directly into the 16-pin OBD port on vehicles from 1996 and newer. Please note that some earlier model OBDII systems communicate rather slowly and make this method of connection, less than ideal. More than 1,000 protocols for 1,000+ ECU in the database, for easily connect your Solo 2 DL to your Engine Control Unit and get a lot of information with just one cable. In case your ECU protocol is not in the database, no problem: an ECU Driver Builder is always available in the Race Studio 3 configuration software, and you will be able to create your protocol by yourself.Hardwire (CAN Stream) This is the best option if looking for a faster data feed and more available data options. Many older cars do not transmit specific data through the OBD port. One example would be that of the E46 M3, which does not provide throttle or steering position through the OBD port. This would significantly reduce the effectiveness of your data overlays for analysis thus making lap time improvements more trivial. Using the CAN option here would be better.This option while more time-consuming (and albeit more difficult) to install provides the best connection to your vehicle as once installed it is cleaner, faster, and provides more real-time data for you to analyze.Coil RPM Input Designed for pre-OBDII cars (1995 and older), this option simply connects to a spark plug wire or coil connector to read RPM data.Solo 2 DL now features a digital input allowing to log RPM either from square wave signals (8-50 V signal) or pulse signals (150-450 V ignition coil trigger - primary circuit).SmartyCam HD connection Combine your SmartyCam HD and ECU cables (sold separately) with your Solo2 DL and get all the data from your ECU, merge them with the GPS information and transmit everything to the SmartyCam HD, which will show them as a graphical overlay on your videos.These lap timers are feature-packed and simply awesome. It is no wonder AiM's lap timers have been finding their way into more and more customers track cars every event. You will not be disappointed with this lap timer! 1712893001762 1712893001762_33013100478487 PFC 08 Rear Racing Brake Pads- F87 M2, F80 M3, F82 M4 1656.08.16.44 https://hinzmotorsport.com/products/pfc-08-rear-racing-brake-pads-f87-m2-f80-m3-f82-m4 Performance Friction Brakes https://cdn.shopify.com/s/files/1/0045/1179/3186/products/pfc1656.jpg?v=1601923759 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 2268 g 1 8 275.95 PFC 08 Racing Pads for F87 M2, F80 M3, F82 M4 (Stock Rear Caliper)Part #: 1656.08.16.44PFC Brakes are a leader in high-performance braking technology. Manufactured right here in the U.S., PFC has been the go-to choice for many top racing teams around the world. They have worked closely with Porsche on the development of their pad compounds and PFC Brakes are standard fitment on Porsche 991 GT3 Cup cars.Biggest Takeaway?We run PFC brakes on our cars for their consistent performance lap-after-lap and their low-wear rates. These things do not overheat either. While you may pay a little bit more for these pads upfront compared to say a Hawk pad, these will last twice as long if not more in many applications. In addition to decreased wear on the pad itself, these pads are also a lot less harsh on rotors. The savings really start to add up compared to inferior brands. In any braking application, you are generally limited by the grip in your tires, these pads will provide all of the stopping power you need.PFC's can also be used on the street when driving from to and from the track. Like any race pad, they will not have as much bite it the cold, but they will work fine in a pinch. Sometimes they squeak, sometimes they don't, but it generally isn't too bad when they do.For the 1656 Pad they are available in the following 2 compounds (application dependent):08 Compound - Smooth Bite - Endurance Racing - 08 compounds are one of PFC's most popular and have gained immediate favor in Trackday/HPDE, Endurance Sportscar, and GT racing due to its performance in applications where smooth initial bite is a must. 08 have a slight friction rise with temperature, excellent release, and modulation characteristics. Very low abraded disc wear with a fine grey slate like disc finish, similar to 01. Despite its considerable performance, 08 wears the longest of all PFC pads and easily matches wear of the other competitors with much higher bite.11 Compound - Strong Initial Bite - Sprint Racing - is a sprint and medium distance friction providing the ultimate in control, with superior disc conditioning. It is ultra smooth and developed to reduce wheel locking at the end of a stop. Typical Applications; Ideal for use at medium-low grip venues where control and modulation are at a premium. 11's wear is par with PFC's legendary 01 compound showing virtually zero taper wear when raced in a properly designed race caliper.332 Compound - Smooth Bite - Endurance Racing/Track Days -332 has been formulated with lower bite and torque for rear applications. With smooth release, the 332 offers excellent stability and control. The 332 has been designed to work with ABS applications and has exceptionally low wear rates. Applications: Endurance pad specifically designed for rear axle on ABS cars. Perfect for Clubsport and Cup models with ABS.All Fitments (Stock Rear Calipers):2 SeriesF22 / F23 (2014+) - M235i/M235i xDrive/M240iF22 / F23 (2014+) - All Models with Blue M Sport CalipersF87 (2016+) - M2 N55 (2016-2018)3 SeriesF80 (2015+) > M3 (2015+)F8X - All Models with Blue M Sport Calipers4 SeriesF82 / F83 (2015+) > M4 (2015+)F8X - All Models with Blue M Sport Calipersmake-bmw,make-bmw-model-2-series,make-bmw-model-2-series-chassis-f22-f23--2014--,make-bmw-model-2-series-chassis-f22-f23--2014---submodel-228i-xdrive,make-bmw-model-2-series-chassis-f22-f23--2014---submodel-m235i-xdrive,make-bmw-model-2-series-chassis-f22-f23--2014---submodel-m240i-xdrive,make-bmw-model-2-series-chassis-f87--2016--,make-bmw-model-2-series-chassis-f87--2016---submodel-m2,make-bmw-model-3-series,make-bmw-model-3-series-chassis-f80--2015--,make-bmw-model-3-series-chassis-f80--2015---submodel-m3,make-bmw-model-4-series,make-bmw-model-4-series-chassis-f32-f33-f36--2014--,make-bmw-model-4-series-chassis-f32-f33-f36--2014---submodel-428i-xdrive,make-bmw-model-4-series-chassis-f32-f33-f36--2014---submodel-430i-xdrive,make-bmw-model-4-series-chassis-f32-f33-f36--2014---submodel-435i-xdrive,make-bmw-model-4-series-chassis-f32-f33-f36--2014---submodel-440i-xdrive,make-bmw-model-4-series-chassis-f82-f83--2015--,make-bmw-model-4-series-chassis-f82-f83--2015---submodel-m4 1704535523362 1704535523362_33013100609559 PFC 08 Front Racing Brake Pads- F87 M2, F80 M3, F82 M4 1609.08.17.44 https://hinzmotorsport.com/products/pfc-08-front-racing-brake-pads-f87-m2-f80-m3-f82-m4 Performance Friction Brakes https://cdn.shopify.com/s/files/1/0045/1179/3186/products/1609.xx.17.44.png?v=1569289616 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 2313 g 1 8 320.95 PFC 08 Racing Pads for F87 M2, F80 M3, F82 M4 (Stock Front Caliper)Part #: 1609.08.17.44PFC Brakes are a leader in high-performance braking technology. Manufactured right here in the U.S., PFC has been the go-to choice for many top racing teams around the world. They have worked closely with Porsche on the development of their pad compounds and PFC Brakes are standard fitment on Porsche 991 GT3 Cup cars.Biggest Takeaway?We run PFC brakes on our cars for their consistent performance lap-after-lap and their low-wear rates. These things do not overheat either. While you may pay a little bit more for these pads upfront compared to say a Hawk pad, these will last twice as long if not more in many applications. In addition to decreased wear on the pad itself, these pads are also a lot less harsh on rotors. The savings really start to add up compared to inferior brands. In any braking application, you are generally limited by the grip in your tires, these pads will provide all of the stopping power you need.PFC's can also be used on the street when driving from to and from the track. Like any race pad, they will not have as much bite it the cold, but they will work fine in a pinch. Sometimes they squeak, sometimes they don't, but it generally isn't too bad when they do.For the 1609 Pad they are available in the following 2 compounds (application dependent):11 Compound - Strong Initial Bite - Sprint Racing - is a sprint and medium distance friction providing the ultimate in control, with superior disc conditioning. It is ultra smooth and developed to reduce wheel locking at the end of a stop. Typical Applications; Ideal for use at medium-low grip venues where control and modulation are at a premium. 11's wear is par with PFC's legendary 01 compound showing virtually zero taper wear when raced in a properly designed race caliper.08 Compound - Smooth Bite - Endurance Racing - 08 compounds are one of PFC's most popular and have gained immediate favor in Trackday/HPDE, Endurance Sportscar, and GT racing due to its performance in applications where smooth initial bite is a must. 08 have a slight friction rise with temperature, excellent release, and modulation characteristics. Very low abraded disc wear with a fine grey slate like disc finish, similar to 01. Despite its considerable performance, 08 wears the longest of all PFC pads and easily matches wear of the other competitors with much higher bite.Common Fitments:Front-F22 M235i/M240i, F3X 335i/340i/435i, F8X M2/M3/M4All Fitments (Stock Front Calipers):1609.XX.17.44Front2 SeriesF22 / F23 (2014+) > 228i/xDriveF22 / F23 (2014+) > M235i/xDrive2 Series ///MF87 (2016+) > M2 N55 (2016-2018)3 SeriesF30 / F31 / F34 (2012+) > 320i/xDrive, 328d/xDrive, 328i/xDrive, 330i/xDrive, 335i/xDrive, 340i/xDrive3 Series ///MF80 (2015+) > M3 (2015+)4 SeriesF32 / F33 / F36 (2014+) > 428i/xDrive, 430i/xDrive, 435i/xDrive, 440i/xDrive4 Series ///MF82 / F83 (2015+) > M4 (2015+)i SeriesI12 i8 (2015+) > i8 Coupe* - These pads fit all M235i/xi, 335i/xi, 435i/xi with stock brakes or the optional M Sport S2NH brakes. They also fit all M2/M3/M4 models.make-bmw,make-bmw-model-2-series,make-bmw-model-2-series-chassis-f22-f23--2014--,make-bmw-model-2-series-chassis-f22-f23--2014---submodel-228i-xdrive,make-bmw-model-2-series-chassis-f22-f23--2014---submodel-m235i-xdrive,make-bmw-model-2-series-chassis-f22-f23--2014---submodel-m240i-xdrive,make-bmw-model-2-series-chassis-f87--2016--,make-bmw-model-2-series-chassis-f87--2016---submodel-m2,make-bmw-model-3-series,make-bmw-model-3-series-chassis-f30-f31-f34--2012--,make-bmw-model-3-series-chassis-f30-f31-f34--2012---submodel-320i-xdrive,make-bmw-model-3-series-chassis-f30-f31-f34--2012---submodel-328d-xdrive,make-bmw-model-3-series-chassis-f30-f31-f34--2012---submodel-328i-xdrive,make-bmw-model-3-series-chassis-f30-f31-f34--2012---submodel-330i-xdrive,make-bmw-model-3-series-chassis-f30-f31-f34--2012---submodel-335i-xdrive,make-bmw-model-3-series-chassis-f30-f31-f34--2012---submodel-340i-xdrive,make-bmw-model-3-series-chassis-f80--2015--,make-bmw-model-3-series-chassis-f80--2015---submodel-m3,make-bmw-model-4-series,make-bmw-model-4-series-chassis-f32-f33-f36--2014--,make-bmw-model-4-series-chassis-f32-f33-f36--2014---submodel-428i-xdrive,make-bmw-model-4-series-chassis-f32-f33-f36--2014---submodel-430i-xdrive,make-bmw-model-4-series-chassis-f32-f33-f36--2014---submodel-435i-xdrive,make-bmw-model-4-series-chassis-f32-f33-f36--2014---submodel-440i-xdrive,make-bmw-model-4-series-chassis-f82-f83--2015--,make-bmw-model-4-series-chassis-f82-f83--2015---submodel-m4 4536417484823 4536417484823_31756645892119 AiM Solo 2 Laptimer X47SOLO2001U0 https://hinzmotorsport.com/products/aim-solo2 AiM Technologies https://cdn.shopify.com/s/files/1/0045/1179/3186/products/AiMSolo2officialphoto1.jpg?v=1599847529 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/AiMSolo2officialphoto1.jpg?v=1599847557 true 1043 g 1 Solo 2 399.00 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/AiMSolo2officialphoto2.jpg?v=1599847557 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/AiMSolo2officialphoto3.jpg?v=1599847557 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/AiMSolo2officialphoto4.jpg?v=1599847557 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/AiMSolo2officialphoto5.jpg?v=1599847557 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/AiMSolo2officialphoto6.jpg?v=1599847557 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/AiMSolo2officialphoto7.jpg?v=1599847557 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/AiMSolo2officialphoto8.jpg?v=1599847557 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/AiMSolo2officialphoto10.jpg?v=1599847557 The brand new GPS lap timers for motorsportsIntroducing the new AiM Solo 2 GPS lap timer. The new solo 2 receives data from two satellite constellations: GPS and Glonass. This new approach over the traditional GPS method greatly improves the speed and precision over the old Solo lap timer. Lap times can now be calculated within a maximum error of 2/100 sec. Solo 2 has a database of over 2,000 track worldwide. As soon as the device is switched on, it identifies it's position and recognizes the starting line coordinates of the track and starts sampling lap times.For tracks not in the database, the Solo 2 device realizes this and switches to learning mode where it automatically understands the characteristics of the track and will provide accurate lap times anyways.The display can now be configured in 7 different colors.Configurable RGB LEDsThe LED's on either side of the screen built into the chassis are now also be configurable.Data recall on screenData can now also be recalled on the display right after your test without the need for a phone or PC.Wi-Fi Communication with the PCSolo 2 now communicates with your PC via Wi-Fi connection eliminating the need for cables when downloading lap data, managing the track database, or when configuring your Solo 2.Coming Soon: You will also be able to connect your iPhone to Solo 2 for track database management, data analysis, *or to even get a live view of the most important engine parameters you have selected*. *Solo 2 DL only, cables purchased separately* 1704502329378 1704502329378_33013100675095 PFC 08 Front Racing Brake Pads - E36 M3, E46 M3 0394.08.20.44 https://hinzmotorsport.com/products/pfc-08-front-racing-brake-pads-e36-m3-e46-m3 Performance Friction Brakes https://cdn.shopify.com/s/files/1/0045/1179/3186/products/0394.xx.20.44.png?v=1569289626 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 2087 g 2 8 349.95 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/37162.jpeg?v=1601928098 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/IMG_20170813_125100095_HDR.jpg?v=1601928098 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/IMG_20190511_084511.jpg?v=1601928098 PFC 08 Racing Pads for E36 M3 & E46 M3.Part #: 0394.08.20.44PFC Brakes are a leader in high-performance braking technology. Manufactured right here in the U.S., PFC has been the go-to choice for many top racing teams around the world. They have worked closely with BMW & Porsche on the development of their pad compounds and PFC Brakes are even standard fitment on Porsche 991 GT3 Cup cars.Biggest Takeaway?We run PFC brakes on our cars for their consistent performance lap-after-lap and their low-wear rates. These things do not overheat either. While you may pay a little bit more for these pads upfront compared to say a Hawk pad, these will last twice as long if not more in many applications. In addition to decreased wear on the pad itself, these pads are also a lot less harsh on rotors. The savings really start to add up compared to inferior brands. In any braking application, you are generally limited by the grip in your tires, these pads will provide all of the stopping power you need.PFC's can also be used on the street when driving from to and from the track. Like any race pad, they will not have as much bite it the cold, but they will work fine in a pinch. Sometimes they squeak, sometimes they don't, but it generally isn't too bad when they do.For the 0394 Pad they are available in the following 2 compounds (application dependent):08 Compound - Smooth Bite - Endurance Racing - 08 compounds are one of PFC's most popular and have gained immediate favor in Trackday/HPDE, Endurance Sportscar, and GT racing due to its performance in applications where smooth initial bite is a must. 08 have a slight friction rise with temperature, excellent release, and modulation characteristics. Very low abraded disc wear with a fine grey slate like disc finish, similar to 01. Despite its considerable performance, 08 wears the longest of all PFC pads and easily matches wear of the other competitors with much higher bite.11 Compound - Strong Initial Bite - Sprint Racing - is a sprint and medium distance friction providing the ultimate in control, with superior disc conditioning. It is ultra smooth and developed to reduce wheel locking at the end of a stop. Typical Applications; Ideal for use at medium-low grip venues where control and modulation are at a premium. 11's wear is par with PFC's legendary 01 compound showing virtually zero taper wear when raced in a properly designed race caliper.All Fitments (Stock Front Calipers):3 SeriesE36 (92-99) > M3 (1995)E36 (92-99) > M3 (96-99)3 SeriesE46 (99-05) > 330CiE46 (99-05) > 330iE46 (99-05) > M33 SeriesE90 / E91 / E92 / E93 (06-13) > 325iE90 / E91 / E92 / E93 (06-13) > 325xiE90 / E91 / E92 / E93 (06-13) > 328iE90 / E91 / E92 / E93 (06-13) > 328xiE90 / E91 / E92 / E93 (06-13) > 330iE90 / E91 / E92 / E93 (06-13) > 330xi5 SeriesE34 (89-95) > 525i M20E34 (89-95) > 525i M50E34 (89-95) > 530iE34 (89-95) > 535iE34 (89-95) > 540iE34 (89-95) > M5 (91-95)5 SeriesE39 (97-03) > 528i7 SeriesE32 (88-94) > 735iE32 (88-94) > 735iLE32 (88-94) > 740iE32 (88-94) > 740iLE32 (88-94) > 750iLX SeriesE83 X3 (04-10) > X3 2.5iE83 X3 (04-10) > X3 3.0iZ SeriesE36/7 / E36/8 Z3 (96-02) > Z3 M - S52E36/7 / E36/8 Z3 (96-02) > Z3 M - S54Z SeriesE85 / E86 Z4 (03-08) > Z4 Mmake-bmw,make-bmw-model-3-series,make-bmw-model-3-series-chassis-e36--92-99-,make-bmw-model-3-series-chassis-e36--92-99--submodel-m3--1995-,make-bmw-model-3-series-chassis-e36--92-99--submodel-m3--96-99-,make-bmw-model-3-series-chassis-e46--99-05-,make-bmw-model-3-series-chassis-e46--99-05--submodel-330i-ci,make-bmw-model-3-series-chassis-e46--99-05--submodel-m3,make-bmw-model-3-series-chassis-e90-e92-e93--2006-13-,make-bmw-model-3-series-chassis-e90-e92-e93--2006-13--submodel-325i-xi,make-bmw-model-3-series-chassis-e90-e92-e93--2006-13--submodel-328i-xi,make-bmw-model-3-series-chassis-e90-e92-e93--2006-13--submodel-330i-xi,make-bmw-model-5-series,make-bmw-model-5-series-chassis-e34--89-95-,make-bmw-model-5-series-chassis-e34--89-95--submodel-525i,make-bmw-model-5-series-chassis-e34--89-95--submodel-530i,make-bmw-model-5-series-chassis-e34--89-95--submodel-535i,make-bmw-model-5-series-chassis-e34--89-95--submodel-540i,make-bmw-model-5-series-chassis-e34--89-95--submodel-m5--91-95-,make-bmw-model-5-series-chassis-e39--97-03-,make-bmw-model-5-series-chassis-e39--97-03--submodel-528i,make-bmw-model-x-series,make-bmw-model-x-series-chassis-e83--2004-10-,make-bmw-model-x-series-chassis-e83--2004-10--submodel-x3-2-5i,make-bmw-model-x-series-chassis-e83--2004-10--submodel-x3-3-0i,make-bmw-model-z-series,make-bmw-model-z-series-chassis-e36-7-8--96-02-,make-bmw-model-z-series-chassis-e36-7-8--96-02--submodel-z3-m,make-bmw-model-z-series-chassis-e85-e86--2003-08-,make-bmw-model-z-series-chassis-e85-e86--2003-08--submodel-z4-m-coupe--2006-08-,make-bmw-model-z-series-chassis-e85-e86--2003-08--submodel-z4-m-roadster--2006-08- 4839222542359 4839222542359_32980161658903 E46 M3 Camber Plates - Street CCPE46M3STREET-1 https://hinzmotorsport.com/products/e46-m3-camber-plates-street Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/e46m3streetcamberplate.jpg?v=1607446628 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 Stock Stock 449.00 399.00 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/GroundControlE9XM3StreetCamberPlate_417207a2-962a-4dab-912d-2afa2dfa5b4c.jpg?v=1607446632 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/CamberPlateEdited_8d35c83b-30d5-49f3-b200-e95a257e56da.jpg?v=1607446632 BMW E46 M3 Street Camber PlatesWhether you are looking to add more fender clearance for wider wheels and tires, improve the handling of your car, or both, camber plates are the perfect solution.We have been running these plates on our E90 M3 for over three years now with 40,000+ street and 1,000+ track miles on them. These have held up amazingly well and do not have any increased NVH at all.The Ground Control STREET/SPORT plate, a special version of their camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control. Camber plates are anodized and the rest of the components are zinc plated for corrosion resistance.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for over 2 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL. Caster adjustment is roughly 3/4 of a degree.Configuration options include 2.25", 2.50", 60mm or Stock springs, low profile dome or standard dome plates, and a Poly spring bushing.Lifetime guarantee on these camber plates, not including bearings.**The included Ground Control nut must be used with these camber plates!**Torque camber plate mounting nuts to 18ft-lbs using a properly calibrated torque wrench. Pneumatic/electric impact gun not recommended. make-bmw,make-bmw-model-3-series,make-bmw-model-3-series-chassis-e46--99-05-,make-bmw-model-3-series-chassis-e46--99-05--submodel-m3 4839222542359 4839222542359_32980161691671 E46 M3 Camber Plates - Street CCPE46M3STREET-2 https://hinzmotorsport.com/products/e46-m3-camber-plates-street Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/e46m3streetcamberplate.jpg?v=1607446628 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 Stock 2.25" 449.00 399.00 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/GroundControlE9XM3StreetCamberPlate_417207a2-962a-4dab-912d-2afa2dfa5b4c.jpg?v=1607446632 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/CamberPlateEdited_8d35c83b-30d5-49f3-b200-e95a257e56da.jpg?v=1607446632 BMW E46 M3 Street Camber PlatesWhether you are looking to add more fender clearance for wider wheels and tires, improve the handling of your car, or both, camber plates are the perfect solution.We have been running these plates on our E90 M3 for over three years now with 40,000+ street and 1,000+ track miles on them. These have held up amazingly well and do not have any increased NVH at all.The Ground Control STREET/SPORT plate, a special version of their camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control. Camber plates are anodized and the rest of the components are zinc plated for corrosion resistance.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for over 2 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL. Caster adjustment is roughly 3/4 of a degree.Configuration options include 2.25", 2.50", 60mm or Stock springs, low profile dome or standard dome plates, and a Poly spring bushing.Lifetime guarantee on these camber plates, not including bearings.**The included Ground Control nut must be used with these camber plates!**Torque camber plate mounting nuts to 18ft-lbs using a properly calibrated torque wrench. Pneumatic/electric impact gun not recommended. make-bmw,make-bmw-model-3-series,make-bmw-model-3-series-chassis-e46--99-05-,make-bmw-model-3-series-chassis-e46--99-05--submodel-m3 4839222542359 4839222542359_32980161724439 E46 M3 Camber Plates - Street CCPE46M3STREET-3 https://hinzmotorsport.com/products/e46-m3-camber-plates-street Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/e46m3streetcamberplate.jpg?v=1607446628 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 Stock 60mm 449.00 399.00 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/GroundControlE9XM3StreetCamberPlate_417207a2-962a-4dab-912d-2afa2dfa5b4c.jpg?v=1607446632 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/CamberPlateEdited_8d35c83b-30d5-49f3-b200-e95a257e56da.jpg?v=1607446632 BMW E46 M3 Street Camber PlatesWhether you are looking to add more fender clearance for wider wheels and tires, improve the handling of your car, or both, camber plates are the perfect solution.We have been running these plates on our E90 M3 for over three years now with 40,000+ street and 1,000+ track miles on them. These have held up amazingly well and do not have any increased NVH at all.The Ground Control STREET/SPORT plate, a special version of their camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control. Camber plates are anodized and the rest of the components are zinc plated for corrosion resistance.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for over 2 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL. Caster adjustment is roughly 3/4 of a degree.Configuration options include 2.25", 2.50", 60mm or Stock springs, low profile dome or standard dome plates, and a Poly spring bushing.Lifetime guarantee on these camber plates, not including bearings.**The included Ground Control nut must be used with these camber plates!**Torque camber plate mounting nuts to 18ft-lbs using a properly calibrated torque wrench. Pneumatic/electric impact gun not recommended. make-bmw,make-bmw-model-3-series,make-bmw-model-3-series-chassis-e46--99-05-,make-bmw-model-3-series-chassis-e46--99-05--submodel-m3 4839222542359 4839222542359_32980161757207 E46 M3 Camber Plates - Street CCPE46M3STREET-4 https://hinzmotorsport.com/products/e46-m3-camber-plates-street Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/e46m3streetcamberplate.jpg?v=1607446628 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 Stock 2.50" 449.00 399.00 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/GroundControlE9XM3StreetCamberPlate_417207a2-962a-4dab-912d-2afa2dfa5b4c.jpg?v=1607446632 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/CamberPlateEdited_8d35c83b-30d5-49f3-b200-e95a257e56da.jpg?v=1607446632 BMW E46 M3 Street Camber PlatesWhether you are looking to add more fender clearance for wider wheels and tires, improve the handling of your car, or both, camber plates are the perfect solution.We have been running these plates on our E90 M3 for over three years now with 40,000+ street and 1,000+ track miles on them. These have held up amazingly well and do not have any increased NVH at all.The Ground Control STREET/SPORT plate, a special version of their camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control. Camber plates are anodized and the rest of the components are zinc plated for corrosion resistance.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for over 2 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL. Caster adjustment is roughly 3/4 of a degree.Configuration options include 2.25", 2.50", 60mm or Stock springs, low profile dome or standard dome plates, and a Poly spring bushing.Lifetime guarantee on these camber plates, not including bearings.**The included Ground Control nut must be used with these camber plates!**Torque camber plate mounting nuts to 18ft-lbs using a properly calibrated torque wrench. Pneumatic/electric impact gun not recommended. make-bmw,make-bmw-model-3-series,make-bmw-model-3-series-chassis-e46--99-05-,make-bmw-model-3-series-chassis-e46--99-05--submodel-m3 4839222542359 4839222542359_32980161789975 E46 M3 Camber Plates - Street CCPE46M3STREET-5 https://hinzmotorsport.com/products/e46-m3-camber-plates-street Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/e46m3streetcamberplate.jpg?v=1607446628 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 ACS Stock 449.00 399.00 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/GroundControlE9XM3StreetCamberPlate_417207a2-962a-4dab-912d-2afa2dfa5b4c.jpg?v=1607446632 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/CamberPlateEdited_8d35c83b-30d5-49f3-b200-e95a257e56da.jpg?v=1607446632 BMW E46 M3 Street Camber PlatesWhether you are looking to add more fender clearance for wider wheels and tires, improve the handling of your car, or both, camber plates are the perfect solution.We have been running these plates on our E90 M3 for over three years now with 40,000+ street and 1,000+ track miles on them. These have held up amazingly well and do not have any increased NVH at all.The Ground Control STREET/SPORT plate, a special version of their camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control. Camber plates are anodized and the rest of the components are zinc plated for corrosion resistance.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for over 2 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL. Caster adjustment is roughly 3/4 of a degree.Configuration options include 2.25", 2.50", 60mm or Stock springs, low profile dome or standard dome plates, and a Poly spring bushing.Lifetime guarantee on these camber plates, not including bearings.**The included Ground Control nut must be used with these camber plates!**Torque camber plate mounting nuts to 18ft-lbs using a properly calibrated torque wrench. Pneumatic/electric impact gun not recommended. make-bmw,make-bmw-model-3-series,make-bmw-model-3-series-chassis-e46--99-05-,make-bmw-model-3-series-chassis-e46--99-05--submodel-m3 4839222542359 4839222542359_32980161822743 E46 M3 Camber Plates - Street CCPE46M3STREET-6 https://hinzmotorsport.com/products/e46-m3-camber-plates-street Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/e46m3streetcamberplate.jpg?v=1607446628 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 ACS 2.25" 449.00 399.00 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/GroundControlE9XM3StreetCamberPlate_417207a2-962a-4dab-912d-2afa2dfa5b4c.jpg?v=1607446632 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/CamberPlateEdited_8d35c83b-30d5-49f3-b200-e95a257e56da.jpg?v=1607446632 BMW E46 M3 Street Camber PlatesWhether you are looking to add more fender clearance for wider wheels and tires, improve the handling of your car, or both, camber plates are the perfect solution.We have been running these plates on our E90 M3 for over three years now with 40,000+ street and 1,000+ track miles on them. These have held up amazingly well and do not have any increased NVH at all.The Ground Control STREET/SPORT plate, a special version of their camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control. Camber plates are anodized and the rest of the components are zinc plated for corrosion resistance.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for over 2 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL. Caster adjustment is roughly 3/4 of a degree.Configuration options include 2.25", 2.50", 60mm or Stock springs, low profile dome or standard dome plates, and a Poly spring bushing.Lifetime guarantee on these camber plates, not including bearings.**The included Ground Control nut must be used with these camber plates!**Torque camber plate mounting nuts to 18ft-lbs using a properly calibrated torque wrench. Pneumatic/electric impact gun not recommended. make-bmw,make-bmw-model-3-series,make-bmw-model-3-series-chassis-e46--99-05-,make-bmw-model-3-series-chassis-e46--99-05--submodel-m3 4839222542359 4839222542359_32980161855511 E46 M3 Camber Plates - Street CCPE46M3STREET-7 https://hinzmotorsport.com/products/e46-m3-camber-plates-street Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/e46m3streetcamberplate.jpg?v=1607446628 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 ACS 60mm 449.00 399.00 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/GroundControlE9XM3StreetCamberPlate_417207a2-962a-4dab-912d-2afa2dfa5b4c.jpg?v=1607446632 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/CamberPlateEdited_8d35c83b-30d5-49f3-b200-e95a257e56da.jpg?v=1607446632 BMW E46 M3 Street Camber PlatesWhether you are looking to add more fender clearance for wider wheels and tires, improve the handling of your car, or both, camber plates are the perfect solution.We have been running these plates on our E90 M3 for over three years now with 40,000+ street and 1,000+ track miles on them. These have held up amazingly well and do not have any increased NVH at all.The Ground Control STREET/SPORT plate, a special version of their camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control. Camber plates are anodized and the rest of the components are zinc plated for corrosion resistance.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for over 2 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL. Caster adjustment is roughly 3/4 of a degree.Configuration options include 2.25", 2.50", 60mm or Stock springs, low profile dome or standard dome plates, and a Poly spring bushing.Lifetime guarantee on these camber plates, not including bearings.**The included Ground Control nut must be used with these camber plates!**Torque camber plate mounting nuts to 18ft-lbs using a properly calibrated torque wrench. Pneumatic/electric impact gun not recommended. make-bmw,make-bmw-model-3-series,make-bmw-model-3-series-chassis-e46--99-05-,make-bmw-model-3-series-chassis-e46--99-05--submodel-m3 4839222542359 4839222542359_32980161888279 E46 M3 Camber Plates - Street CCPE46M3STREET-8 https://hinzmotorsport.com/products/e46-m3-camber-plates-street Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/e46m3streetcamberplate.jpg?v=1607446628 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 ACS 2.50" 449.00 399.00 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/GroundControlE9XM3StreetCamberPlate_417207a2-962a-4dab-912d-2afa2dfa5b4c.jpg?v=1607446632 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/CamberPlateEdited_8d35c83b-30d5-49f3-b200-e95a257e56da.jpg?v=1607446632 BMW E46 M3 Street Camber PlatesWhether you are looking to add more fender clearance for wider wheels and tires, improve the handling of your car, or both, camber plates are the perfect solution.We have been running these plates on our E90 M3 for over three years now with 40,000+ street and 1,000+ track miles on them. These have held up amazingly well and do not have any increased NVH at all.The Ground Control STREET/SPORT plate, a special version of their camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control. Camber plates are anodized and the rest of the components are zinc plated for corrosion resistance.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for over 2 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL. Caster adjustment is roughly 3/4 of a degree.Configuration options include 2.25", 2.50", 60mm or Stock springs, low profile dome or standard dome plates, and a Poly spring bushing.Lifetime guarantee on these camber plates, not including bearings.**The included Ground Control nut must be used with these camber plates!**Torque camber plate mounting nuts to 18ft-lbs using a properly calibrated torque wrench. Pneumatic/electric impact gun not recommended. make-bmw,make-bmw-model-3-series,make-bmw-model-3-series-chassis-e46--99-05-,make-bmw-model-3-series-chassis-e46--99-05--submodel-m3 4839222542359 4839222542359_32980161921047 E46 M3 Camber Plates - Street CCPE46M3STREET-9 https://hinzmotorsport.com/products/e46-m3-camber-plates-street Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/e46m3streetcamberplate.jpg?v=1607446628 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 Bilstein Stock 449.00 399.00 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/GroundControlE9XM3StreetCamberPlate_417207a2-962a-4dab-912d-2afa2dfa5b4c.jpg?v=1607446632 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/CamberPlateEdited_8d35c83b-30d5-49f3-b200-e95a257e56da.jpg?v=1607446632 BMW E46 M3 Street Camber PlatesWhether you are looking to add more fender clearance for wider wheels and tires, improve the handling of your car, or both, camber plates are the perfect solution.We have been running these plates on our E90 M3 for over three years now with 40,000+ street and 1,000+ track miles on them. These have held up amazingly well and do not have any increased NVH at all.The Ground Control STREET/SPORT plate, a special version of their camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control. Camber plates are anodized and the rest of the components are zinc plated for corrosion resistance.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for over 2 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL. Caster adjustment is roughly 3/4 of a degree.Configuration options include 2.25", 2.50", 60mm or Stock springs, low profile dome or standard dome plates, and a Poly spring bushing.Lifetime guarantee on these camber plates, not including bearings.**The included Ground Control nut must be used with these camber plates!**Torque camber plate mounting nuts to 18ft-lbs using a properly calibrated torque wrench. Pneumatic/electric impact gun not recommended. make-bmw,make-bmw-model-3-series,make-bmw-model-3-series-chassis-e46--99-05-,make-bmw-model-3-series-chassis-e46--99-05--submodel-m3 4839222542359 4839222542359_32980161953815 E46 M3 Camber Plates - Street CCPE46M3STREET-9 https://hinzmotorsport.com/products/e46-m3-camber-plates-street Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/e46m3streetcamberplate.jpg?v=1607446628 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 Bilstein 2.25" 449.00 399.00 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/GroundControlE9XM3StreetCamberPlate_417207a2-962a-4dab-912d-2afa2dfa5b4c.jpg?v=1607446632 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/CamberPlateEdited_8d35c83b-30d5-49f3-b200-e95a257e56da.jpg?v=1607446632 BMW E46 M3 Street Camber PlatesWhether you are looking to add more fender clearance for wider wheels and tires, improve the handling of your car, or both, camber plates are the perfect solution.We have been running these plates on our E90 M3 for over three years now with 40,000+ street and 1,000+ track miles on them. These have held up amazingly well and do not have any increased NVH at all.The Ground Control STREET/SPORT plate, a special version of their camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control. Camber plates are anodized and the rest of the components are zinc plated for corrosion resistance.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for over 2 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL. Caster adjustment is roughly 3/4 of a degree.Configuration options include 2.25", 2.50", 60mm or Stock springs, low profile dome or standard dome plates, and a Poly spring bushing.Lifetime guarantee on these camber plates, not including bearings.**The included Ground Control nut must be used with these camber plates!**Torque camber plate mounting nuts to 18ft-lbs using a properly calibrated torque wrench. Pneumatic/electric impact gun not recommended. make-bmw,make-bmw-model-3-series,make-bmw-model-3-series-chassis-e46--99-05-,make-bmw-model-3-series-chassis-e46--99-05--submodel-m3 4839222542359 4839222542359_32980161986583 E46 M3 Camber Plates - Street CCPE46M3STREET-10 https://hinzmotorsport.com/products/e46-m3-camber-plates-street Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/e46m3streetcamberplate.jpg?v=1607446628 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 Bilstein 60mm 449.00 399.00 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/GroundControlE9XM3StreetCamberPlate_417207a2-962a-4dab-912d-2afa2dfa5b4c.jpg?v=1607446632 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/CamberPlateEdited_8d35c83b-30d5-49f3-b200-e95a257e56da.jpg?v=1607446632 BMW E46 M3 Street Camber PlatesWhether you are looking to add more fender clearance for wider wheels and tires, improve the handling of your car, or both, camber plates are the perfect solution.We have been running these plates on our E90 M3 for over three years now with 40,000+ street and 1,000+ track miles on them. These have held up amazingly well and do not have any increased NVH at all.The Ground Control STREET/SPORT plate, a special version of their camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control. Camber plates are anodized and the rest of the components are zinc plated for corrosion resistance.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for over 2 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL. Caster adjustment is roughly 3/4 of a degree.Configuration options include 2.25", 2.50", 60mm or Stock springs, low profile dome or standard dome plates, and a Poly spring bushing.Lifetime guarantee on these camber plates, not including bearings.**The included Ground Control nut must be used with these camber plates!**Torque camber plate mounting nuts to 18ft-lbs using a properly calibrated torque wrench. Pneumatic/electric impact gun not recommended. make-bmw,make-bmw-model-3-series,make-bmw-model-3-series-chassis-e46--99-05-,make-bmw-model-3-series-chassis-e46--99-05--submodel-m3 4839222542359 4839222542359_32980162019351 E46 M3 Camber Plates - Street CCPE46M3STREET-11 https://hinzmotorsport.com/products/e46-m3-camber-plates-street Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/e46m3streetcamberplate.jpg?v=1607446628 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 Bilstein 2.50" 449.00 399.00 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/GroundControlE9XM3StreetCamberPlate_417207a2-962a-4dab-912d-2afa2dfa5b4c.jpg?v=1607446632 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/CamberPlateEdited_8d35c83b-30d5-49f3-b200-e95a257e56da.jpg?v=1607446632 BMW E46 M3 Street Camber PlatesWhether you are looking to add more fender clearance for wider wheels and tires, improve the handling of your car, or both, camber plates are the perfect solution.We have been running these plates on our E90 M3 for over three years now with 40,000+ street and 1,000+ track miles on them. These have held up amazingly well and do not have any increased NVH at all.The Ground Control STREET/SPORT plate, a special version of their camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control. Camber plates are anodized and the rest of the components are zinc plated for corrosion resistance.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for over 2 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL. Caster adjustment is roughly 3/4 of a degree.Configuration options include 2.25", 2.50", 60mm or Stock springs, low profile dome or standard dome plates, and a Poly spring bushing.Lifetime guarantee on these camber plates, not including bearings.**The included Ground Control nut must be used with these camber plates!**Torque camber plate mounting nuts to 18ft-lbs using a properly calibrated torque wrench. Pneumatic/electric impact gun not recommended. make-bmw,make-bmw-model-3-series,make-bmw-model-3-series-chassis-e46--99-05-,make-bmw-model-3-series-chassis-e46--99-05--submodel-m3 4839222542359 4839222542359_32980162052119 E46 M3 Camber Plates - Street CCPE46M3STREET-12 https://hinzmotorsport.com/products/e46-m3-camber-plates-street Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/e46m3streetcamberplate.jpg?v=1607446628 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 Moton Stock 449.00 399.00 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/GroundControlE9XM3StreetCamberPlate_417207a2-962a-4dab-912d-2afa2dfa5b4c.jpg?v=1607446632 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/CamberPlateEdited_8d35c83b-30d5-49f3-b200-e95a257e56da.jpg?v=1607446632 BMW E46 M3 Street Camber PlatesWhether you are looking to add more fender clearance for wider wheels and tires, improve the handling of your car, or both, camber plates are the perfect solution.We have been running these plates on our E90 M3 for over three years now with 40,000+ street and 1,000+ track miles on them. These have held up amazingly well and do not have any increased NVH at all.The Ground Control STREET/SPORT plate, a special version of their camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control. Camber plates are anodized and the rest of the components are zinc plated for corrosion resistance.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for over 2 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL. Caster adjustment is roughly 3/4 of a degree.Configuration options include 2.25", 2.50", 60mm or Stock springs, low profile dome or standard dome plates, and a Poly spring bushing.Lifetime guarantee on these camber plates, not including bearings.**The included Ground Control nut must be used with these camber plates!**Torque camber plate mounting nuts to 18ft-lbs using a properly calibrated torque wrench. Pneumatic/electric impact gun not recommended. make-bmw,make-bmw-model-3-series,make-bmw-model-3-series-chassis-e46--99-05-,make-bmw-model-3-series-chassis-e46--99-05--submodel-m3 4839222542359 4839222542359_32980162084887 E46 M3 Camber Plates - Street CCPE46M3STREET-13 https://hinzmotorsport.com/products/e46-m3-camber-plates-street Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/e46m3streetcamberplate.jpg?v=1607446628 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 Moton 2.25" 449.00 399.00 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/GroundControlE9XM3StreetCamberPlate_417207a2-962a-4dab-912d-2afa2dfa5b4c.jpg?v=1607446632 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/CamberPlateEdited_8d35c83b-30d5-49f3-b200-e95a257e56da.jpg?v=1607446632 BMW E46 M3 Street Camber PlatesWhether you are looking to add more fender clearance for wider wheels and tires, improve the handling of your car, or both, camber plates are the perfect solution.We have been running these plates on our E90 M3 for over three years now with 40,000+ street and 1,000+ track miles on them. These have held up amazingly well and do not have any increased NVH at all.The Ground Control STREET/SPORT plate, a special version of their camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control. Camber plates are anodized and the rest of the components are zinc plated for corrosion resistance.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for over 2 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL. Caster adjustment is roughly 3/4 of a degree.Configuration options include 2.25", 2.50", 60mm or Stock springs, low profile dome or standard dome plates, and a Poly spring bushing.Lifetime guarantee on these camber plates, not including bearings.**The included Ground Control nut must be used with these camber plates!**Torque camber plate mounting nuts to 18ft-lbs using a properly calibrated torque wrench. Pneumatic/electric impact gun not recommended. make-bmw,make-bmw-model-3-series,make-bmw-model-3-series-chassis-e46--99-05-,make-bmw-model-3-series-chassis-e46--99-05--submodel-m3 4839222542359 4839222542359_32980162117655 E46 M3 Camber Plates - Street CCPE46M3STREET-14 https://hinzmotorsport.com/products/e46-m3-camber-plates-street Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/e46m3streetcamberplate.jpg?v=1607446628 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 Moton 60mm 449.00 399.00 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/GroundControlE9XM3StreetCamberPlate_417207a2-962a-4dab-912d-2afa2dfa5b4c.jpg?v=1607446632 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/CamberPlateEdited_8d35c83b-30d5-49f3-b200-e95a257e56da.jpg?v=1607446632 BMW E46 M3 Street Camber PlatesWhether you are looking to add more fender clearance for wider wheels and tires, improve the handling of your car, or both, camber plates are the perfect solution.We have been running these plates on our E90 M3 for over three years now with 40,000+ street and 1,000+ track miles on them. These have held up amazingly well and do not have any increased NVH at all.The Ground Control STREET/SPORT plate, a special version of their camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control. Camber plates are anodized and the rest of the components are zinc plated for corrosion resistance.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for over 2 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL. Caster adjustment is roughly 3/4 of a degree.Configuration options include 2.25", 2.50", 60mm or Stock springs, low profile dome or standard dome plates, and a Poly spring bushing.Lifetime guarantee on these camber plates, not including bearings.**The included Ground Control nut must be used with these camber plates!**Torque camber plate mounting nuts to 18ft-lbs using a properly calibrated torque wrench. Pneumatic/electric impact gun not recommended. make-bmw,make-bmw-model-3-series,make-bmw-model-3-series-chassis-e46--99-05-,make-bmw-model-3-series-chassis-e46--99-05--submodel-m3 4839222542359 4839222542359_32980162150423 E46 M3 Camber Plates - Street CCPE46M3STREET-15 https://hinzmotorsport.com/products/e46-m3-camber-plates-street Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/e46m3streetcamberplate.jpg?v=1607446628 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 Moton 2.50" 449.00 399.00 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/GroundControlE9XM3StreetCamberPlate_417207a2-962a-4dab-912d-2afa2dfa5b4c.jpg?v=1607446632 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/CamberPlateEdited_8d35c83b-30d5-49f3-b200-e95a257e56da.jpg?v=1607446632 BMW E46 M3 Street Camber PlatesWhether you are looking to add more fender clearance for wider wheels and tires, improve the handling of your car, or both, camber plates are the perfect solution.We have been running these plates on our E90 M3 for over three years now with 40,000+ street and 1,000+ track miles on them. These have held up amazingly well and do not have any increased NVH at all.The Ground Control STREET/SPORT plate, a special version of their camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control. Camber plates are anodized and the rest of the components are zinc plated for corrosion resistance.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for over 2 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL. Caster adjustment is roughly 3/4 of a degree.Configuration options include 2.25", 2.50", 60mm or Stock springs, low profile dome or standard dome plates, and a Poly spring bushing.Lifetime guarantee on these camber plates, not including bearings.**The included Ground Control nut must be used with these camber plates!**Torque camber plate mounting nuts to 18ft-lbs using a properly calibrated torque wrench. Pneumatic/electric impact gun not recommended. make-bmw,make-bmw-model-3-series,make-bmw-model-3-series-chassis-e46--99-05-,make-bmw-model-3-series-chassis-e46--99-05--submodel-m3 4839222542359 4839222542359_32980162183191 E46 M3 Camber Plates - Street CCPE46M3STREET-16 https://hinzmotorsport.com/products/e46-m3-camber-plates-street Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/e46m3streetcamberplate.jpg?v=1607446628 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 JRZ Stock 449.00 399.00 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/GroundControlE9XM3StreetCamberPlate_417207a2-962a-4dab-912d-2afa2dfa5b4c.jpg?v=1607446632 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/CamberPlateEdited_8d35c83b-30d5-49f3-b200-e95a257e56da.jpg?v=1607446632 BMW E46 M3 Street Camber PlatesWhether you are looking to add more fender clearance for wider wheels and tires, improve the handling of your car, or both, camber plates are the perfect solution.We have been running these plates on our E90 M3 for over three years now with 40,000+ street and 1,000+ track miles on them. These have held up amazingly well and do not have any increased NVH at all.The Ground Control STREET/SPORT plate, a special version of their camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control. Camber plates are anodized and the rest of the components are zinc plated for corrosion resistance.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for over 2 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL. Caster adjustment is roughly 3/4 of a degree.Configuration options include 2.25", 2.50", 60mm or Stock springs, low profile dome or standard dome plates, and a Poly spring bushing.Lifetime guarantee on these camber plates, not including bearings.**The included Ground Control nut must be used with these camber plates!**Torque camber plate mounting nuts to 18ft-lbs using a properly calibrated torque wrench. Pneumatic/electric impact gun not recommended. make-bmw,make-bmw-model-3-series,make-bmw-model-3-series-chassis-e46--99-05-,make-bmw-model-3-series-chassis-e46--99-05--submodel-m3 4839222542359 4839222542359_32980162215959 E46 M3 Camber Plates - Street CCPE46M3STREET-17 https://hinzmotorsport.com/products/e46-m3-camber-plates-street Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/e46m3streetcamberplate.jpg?v=1607446628 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 JRZ 2.25" 449.00 399.00 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/GroundControlE9XM3StreetCamberPlate_417207a2-962a-4dab-912d-2afa2dfa5b4c.jpg?v=1607446632 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/CamberPlateEdited_8d35c83b-30d5-49f3-b200-e95a257e56da.jpg?v=1607446632 BMW E46 M3 Street Camber PlatesWhether you are looking to add more fender clearance for wider wheels and tires, improve the handling of your car, or both, camber plates are the perfect solution.We have been running these plates on our E90 M3 for over three years now with 40,000+ street and 1,000+ track miles on them. These have held up amazingly well and do not have any increased NVH at all.The Ground Control STREET/SPORT plate, a special version of their camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control. Camber plates are anodized and the rest of the components are zinc plated for corrosion resistance.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for over 2 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL. Caster adjustment is roughly 3/4 of a degree.Configuration options include 2.25", 2.50", 60mm or Stock springs, low profile dome or standard dome plates, and a Poly spring bushing.Lifetime guarantee on these camber plates, not including bearings.**The included Ground Control nut must be used with these camber plates!**Torque camber plate mounting nuts to 18ft-lbs using a properly calibrated torque wrench. Pneumatic/electric impact gun not recommended. make-bmw,make-bmw-model-3-series,make-bmw-model-3-series-chassis-e46--99-05-,make-bmw-model-3-series-chassis-e46--99-05--submodel-m3 4839222542359 4839222542359_32980162248727 E46 M3 Camber Plates - Street CCPE46M3STREET-18 https://hinzmotorsport.com/products/e46-m3-camber-plates-street Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/e46m3streetcamberplate.jpg?v=1607446628 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 JRZ 60mm 449.00 399.00 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/GroundControlE9XM3StreetCamberPlate_417207a2-962a-4dab-912d-2afa2dfa5b4c.jpg?v=1607446632 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/CamberPlateEdited_8d35c83b-30d5-49f3-b200-e95a257e56da.jpg?v=1607446632 BMW E46 M3 Street Camber PlatesWhether you are looking to add more fender clearance for wider wheels and tires, improve the handling of your car, or both, camber plates are the perfect solution.We have been running these plates on our E90 M3 for over three years now with 40,000+ street and 1,000+ track miles on them. These have held up amazingly well and do not have any increased NVH at all.The Ground Control STREET/SPORT plate, a special version of their camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control. Camber plates are anodized and the rest of the components are zinc plated for corrosion resistance.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for over 2 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL. Caster adjustment is roughly 3/4 of a degree.Configuration options include 2.25", 2.50", 60mm or Stock springs, low profile dome or standard dome plates, and a Poly spring bushing.Lifetime guarantee on these camber plates, not including bearings.**The included Ground Control nut must be used with these camber plates!**Torque camber plate mounting nuts to 18ft-lbs using a properly calibrated torque wrench. Pneumatic/electric impact gun not recommended. make-bmw,make-bmw-model-3-series,make-bmw-model-3-series-chassis-e46--99-05-,make-bmw-model-3-series-chassis-e46--99-05--submodel-m3 4839222542359 4839222542359_32980162281495 E46 M3 Camber Plates - Street CCPE46M3STREET-19 https://hinzmotorsport.com/products/e46-m3-camber-plates-street Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/e46m3streetcamberplate.jpg?v=1607446628 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 JRZ 2.50" 449.00 399.00 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/GroundControlE9XM3StreetCamberPlate_417207a2-962a-4dab-912d-2afa2dfa5b4c.jpg?v=1607446632 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/CamberPlateEdited_8d35c83b-30d5-49f3-b200-e95a257e56da.jpg?v=1607446632 BMW E46 M3 Street Camber PlatesWhether you are looking to add more fender clearance for wider wheels and tires, improve the handling of your car, or both, camber plates are the perfect solution.We have been running these plates on our E90 M3 for over three years now with 40,000+ street and 1,000+ track miles on them. These have held up amazingly well and do not have any increased NVH at all.The Ground Control STREET/SPORT plate, a special version of their camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control. Camber plates are anodized and the rest of the components are zinc plated for corrosion resistance.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for over 2 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL. Caster adjustment is roughly 3/4 of a degree.Configuration options include 2.25", 2.50", 60mm or Stock springs, low profile dome or standard dome plates, and a Poly spring bushing.Lifetime guarantee on these camber plates, not including bearings.**The included Ground Control nut must be used with these camber plates!**Torque camber plate mounting nuts to 18ft-lbs using a properly calibrated torque wrench. Pneumatic/electric impact gun not recommended. make-bmw,make-bmw-model-3-series,make-bmw-model-3-series-chassis-e46--99-05-,make-bmw-model-3-series-chassis-e46--99-05--submodel-m3 4839222542359 4839222542359_32980162314263 E46 M3 Camber Plates - Street CCPE46M3STREET-20 https://hinzmotorsport.com/products/e46-m3-camber-plates-street Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/e46m3streetcamberplate.jpg?v=1607446628 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 Koni Stock 449.00 399.00 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/GroundControlE9XM3StreetCamberPlate_417207a2-962a-4dab-912d-2afa2dfa5b4c.jpg?v=1607446632 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/CamberPlateEdited_8d35c83b-30d5-49f3-b200-e95a257e56da.jpg?v=1607446632 BMW E46 M3 Street Camber PlatesWhether you are looking to add more fender clearance for wider wheels and tires, improve the handling of your car, or both, camber plates are the perfect solution.We have been running these plates on our E90 M3 for over three years now with 40,000+ street and 1,000+ track miles on them. These have held up amazingly well and do not have any increased NVH at all.The Ground Control STREET/SPORT plate, a special version of their camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control. Camber plates are anodized and the rest of the components are zinc plated for corrosion resistance.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for over 2 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL. Caster adjustment is roughly 3/4 of a degree.Configuration options include 2.25", 2.50", 60mm or Stock springs, low profile dome or standard dome plates, and a Poly spring bushing.Lifetime guarantee on these camber plates, not including bearings.**The included Ground Control nut must be used with these camber plates!**Torque camber plate mounting nuts to 18ft-lbs using a properly calibrated torque wrench. Pneumatic/electric impact gun not recommended. make-bmw,make-bmw-model-3-series,make-bmw-model-3-series-chassis-e46--99-05-,make-bmw-model-3-series-chassis-e46--99-05--submodel-m3 4839222542359 4839222542359_32980162445335 E46 M3 Camber Plates - Street CCPE46M3STREET-21 https://hinzmotorsport.com/products/e46-m3-camber-plates-street Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/e46m3streetcamberplate.jpg?v=1607446628 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 Koni 2.25" 449.00 399.00 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/GroundControlE9XM3StreetCamberPlate_417207a2-962a-4dab-912d-2afa2dfa5b4c.jpg?v=1607446632 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/CamberPlateEdited_8d35c83b-30d5-49f3-b200-e95a257e56da.jpg?v=1607446632 BMW E46 M3 Street Camber PlatesWhether you are looking to add more fender clearance for wider wheels and tires, improve the handling of your car, or both, camber plates are the perfect solution.We have been running these plates on our E90 M3 for over three years now with 40,000+ street and 1,000+ track miles on them. These have held up amazingly well and do not have any increased NVH at all.The Ground Control STREET/SPORT plate, a special version of their camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control. Camber plates are anodized and the rest of the components are zinc plated for corrosion resistance.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for over 2 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL. Caster adjustment is roughly 3/4 of a degree.Configuration options include 2.25", 2.50", 60mm or Stock springs, low profile dome or standard dome plates, and a Poly spring bushing.Lifetime guarantee on these camber plates, not including bearings.**The included Ground Control nut must be used with these camber plates!**Torque camber plate mounting nuts to 18ft-lbs using a properly calibrated torque wrench. Pneumatic/electric impact gun not recommended. make-bmw,make-bmw-model-3-series,make-bmw-model-3-series-chassis-e46--99-05-,make-bmw-model-3-series-chassis-e46--99-05--submodel-m3 4839222542359 4839222542359_32980162543639 E46 M3 Camber Plates - Street CCPE46M3STREET-22 https://hinzmotorsport.com/products/e46-m3-camber-plates-street Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/e46m3streetcamberplate.jpg?v=1607446628 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 Koni 60mm 449.00 399.00 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/GroundControlE9XM3StreetCamberPlate_417207a2-962a-4dab-912d-2afa2dfa5b4c.jpg?v=1607446632 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/CamberPlateEdited_8d35c83b-30d5-49f3-b200-e95a257e56da.jpg?v=1607446632 BMW E46 M3 Street Camber PlatesWhether you are looking to add more fender clearance for wider wheels and tires, improve the handling of your car, or both, camber plates are the perfect solution.We have been running these plates on our E90 M3 for over three years now with 40,000+ street and 1,000+ track miles on them. These have held up amazingly well and do not have any increased NVH at all.The Ground Control STREET/SPORT plate, a special version of their camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control. Camber plates are anodized and the rest of the components are zinc plated for corrosion resistance.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for over 2 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL. Caster adjustment is roughly 3/4 of a degree.Configuration options include 2.25", 2.50", 60mm or Stock springs, low profile dome or standard dome plates, and a Poly spring bushing.Lifetime guarantee on these camber plates, not including bearings.**The included Ground Control nut must be used with these camber plates!**Torque camber plate mounting nuts to 18ft-lbs using a properly calibrated torque wrench. Pneumatic/electric impact gun not recommended. make-bmw,make-bmw-model-3-series,make-bmw-model-3-series-chassis-e46--99-05-,make-bmw-model-3-series-chassis-e46--99-05--submodel-m3 4839222542359 4839222542359_32980162576407 E46 M3 Camber Plates - Street CCPE46M3STREET-23 https://hinzmotorsport.com/products/e46-m3-camber-plates-street Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/e46m3streetcamberplate.jpg?v=1607446628 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 Koni 2.50" 449.00 399.00 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/GroundControlE9XM3StreetCamberPlate_417207a2-962a-4dab-912d-2afa2dfa5b4c.jpg?v=1607446632 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/CamberPlateEdited_8d35c83b-30d5-49f3-b200-e95a257e56da.jpg?v=1607446632 BMW E46 M3 Street Camber PlatesWhether you are looking to add more fender clearance for wider wheels and tires, improve the handling of your car, or both, camber plates are the perfect solution.We have been running these plates on our E90 M3 for over three years now with 40,000+ street and 1,000+ track miles on them. These have held up amazingly well and do not have any increased NVH at all.The Ground Control STREET/SPORT plate, a special version of their camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control. Camber plates are anodized and the rest of the components are zinc plated for corrosion resistance.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for over 2 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL. Caster adjustment is roughly 3/4 of a degree.Configuration options include 2.25", 2.50", 60mm or Stock springs, low profile dome or standard dome plates, and a Poly spring bushing.Lifetime guarantee on these camber plates, not including bearings.**The included Ground Control nut must be used with these camber plates!**Torque camber plate mounting nuts to 18ft-lbs using a properly calibrated torque wrench. Pneumatic/electric impact gun not recommended. make-bmw,make-bmw-model-3-series,make-bmw-model-3-series-chassis-e46--99-05-,make-bmw-model-3-series-chassis-e46--99-05--submodel-m3 4839222542359 4839222542359_32980162609175 E46 M3 Camber Plates - Street CCPE46M3STREET-24 https://hinzmotorsport.com/products/e46-m3-camber-plates-street Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/e46m3streetcamberplate.jpg?v=1607446628 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 MCS Stock 449.00 399.00 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/GroundControlE9XM3StreetCamberPlate_417207a2-962a-4dab-912d-2afa2dfa5b4c.jpg?v=1607446632 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/CamberPlateEdited_8d35c83b-30d5-49f3-b200-e95a257e56da.jpg?v=1607446632 BMW E46 M3 Street Camber PlatesWhether you are looking to add more fender clearance for wider wheels and tires, improve the handling of your car, or both, camber plates are the perfect solution.We have been running these plates on our E90 M3 for over three years now with 40,000+ street and 1,000+ track miles on them. These have held up amazingly well and do not have any increased NVH at all.The Ground Control STREET/SPORT plate, a special version of their camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control. Camber plates are anodized and the rest of the components are zinc plated for corrosion resistance.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for over 2 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL. Caster adjustment is roughly 3/4 of a degree.Configuration options include 2.25", 2.50", 60mm or Stock springs, low profile dome or standard dome plates, and a Poly spring bushing.Lifetime guarantee on these camber plates, not including bearings.**The included Ground Control nut must be used with these camber plates!**Torque camber plate mounting nuts to 18ft-lbs using a properly calibrated torque wrench. Pneumatic/electric impact gun not recommended. make-bmw,make-bmw-model-3-series,make-bmw-model-3-series-chassis-e46--99-05-,make-bmw-model-3-series-chassis-e46--99-05--submodel-m3 4839222542359 4839222542359_32980162641943 E46 M3 Camber Plates - Street CCPE46M3STREET-25 https://hinzmotorsport.com/products/e46-m3-camber-plates-street Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/e46m3streetcamberplate.jpg?v=1607446628 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 MCS 2.25" 449.00 399.00 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/GroundControlE9XM3StreetCamberPlate_417207a2-962a-4dab-912d-2afa2dfa5b4c.jpg?v=1607446632 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/CamberPlateEdited_8d35c83b-30d5-49f3-b200-e95a257e56da.jpg?v=1607446632 BMW E46 M3 Street Camber PlatesWhether you are looking to add more fender clearance for wider wheels and tires, improve the handling of your car, or both, camber plates are the perfect solution.We have been running these plates on our E90 M3 for over three years now with 40,000+ street and 1,000+ track miles on them. These have held up amazingly well and do not have any increased NVH at all.The Ground Control STREET/SPORT plate, a special version of their camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control. Camber plates are anodized and the rest of the components are zinc plated for corrosion resistance.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for over 2 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL. Caster adjustment is roughly 3/4 of a degree.Configuration options include 2.25", 2.50", 60mm or Stock springs, low profile dome or standard dome plates, and a Poly spring bushing.Lifetime guarantee on these camber plates, not including bearings.**The included Ground Control nut must be used with these camber plates!**Torque camber plate mounting nuts to 18ft-lbs using a properly calibrated torque wrench. Pneumatic/electric impact gun not recommended. make-bmw,make-bmw-model-3-series,make-bmw-model-3-series-chassis-e46--99-05-,make-bmw-model-3-series-chassis-e46--99-05--submodel-m3 4839222542359 4839222542359_32980162674711 E46 M3 Camber Plates - Street CCPE46M3STREET-26 https://hinzmotorsport.com/products/e46-m3-camber-plates-street Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/e46m3streetcamberplate.jpg?v=1607446628 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 MCS 60mm 449.00 399.00 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/GroundControlE9XM3StreetCamberPlate_417207a2-962a-4dab-912d-2afa2dfa5b4c.jpg?v=1607446632 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/CamberPlateEdited_8d35c83b-30d5-49f3-b200-e95a257e56da.jpg?v=1607446632 BMW E46 M3 Street Camber PlatesWhether you are looking to add more fender clearance for wider wheels and tires, improve the handling of your car, or both, camber plates are the perfect solution.We have been running these plates on our E90 M3 for over three years now with 40,000+ street and 1,000+ track miles on them. These have held up amazingly well and do not have any increased NVH at all.The Ground Control STREET/SPORT plate, a special version of their camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control. Camber plates are anodized and the rest of the components are zinc plated for corrosion resistance.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for over 2 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL. Caster adjustment is roughly 3/4 of a degree.Configuration options include 2.25", 2.50", 60mm or Stock springs, low profile dome or standard dome plates, and a Poly spring bushing.Lifetime guarantee on these camber plates, not including bearings.**The included Ground Control nut must be used with these camber plates!**Torque camber plate mounting nuts to 18ft-lbs using a properly calibrated torque wrench. Pneumatic/electric impact gun not recommended. make-bmw,make-bmw-model-3-series,make-bmw-model-3-series-chassis-e46--99-05-,make-bmw-model-3-series-chassis-e46--99-05--submodel-m3 4839222542359 4839222542359_32980162707479 E46 M3 Camber Plates - Street CCPE46M3STREET-26 https://hinzmotorsport.com/products/e46-m3-camber-plates-street Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/e46m3streetcamberplate.jpg?v=1607446628 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 MCS 2.50" 449.00 399.00 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/GroundControlE9XM3StreetCamberPlate_417207a2-962a-4dab-912d-2afa2dfa5b4c.jpg?v=1607446632 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/CamberPlateEdited_8d35c83b-30d5-49f3-b200-e95a257e56da.jpg?v=1607446632 BMW E46 M3 Street Camber PlatesWhether you are looking to add more fender clearance for wider wheels and tires, improve the handling of your car, or both, camber plates are the perfect solution.We have been running these plates on our E90 M3 for over three years now with 40,000+ street and 1,000+ track miles on them. These have held up amazingly well and do not have any increased NVH at all.The Ground Control STREET/SPORT plate, a special version of their camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control. Camber plates are anodized and the rest of the components are zinc plated for corrosion resistance.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for over 2 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL. Caster adjustment is roughly 3/4 of a degree.Configuration options include 2.25", 2.50", 60mm or Stock springs, low profile dome or standard dome plates, and a Poly spring bushing.Lifetime guarantee on these camber plates, not including bearings.**The included Ground Control nut must be used with these camber plates!**Torque camber plate mounting nuts to 18ft-lbs using a properly calibrated torque wrench. Pneumatic/electric impact gun not recommended. make-bmw,make-bmw-model-3-series,make-bmw-model-3-series-chassis-e46--99-05-,make-bmw-model-3-series-chassis-e46--99-05--submodel-m3 4839222542359 4839222542359_32980162740247 E46 M3 Camber Plates - Street CCPE46M3STREET-27 https://hinzmotorsport.com/products/e46-m3-camber-plates-street Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/e46m3streetcamberplate.jpg?v=1607446628 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 Ohlins Stock 449.00 399.00 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/GroundControlE9XM3StreetCamberPlate_417207a2-962a-4dab-912d-2afa2dfa5b4c.jpg?v=1607446632 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/CamberPlateEdited_8d35c83b-30d5-49f3-b200-e95a257e56da.jpg?v=1607446632 BMW E46 M3 Street Camber PlatesWhether you are looking to add more fender clearance for wider wheels and tires, improve the handling of your car, or both, camber plates are the perfect solution.We have been running these plates on our E90 M3 for over three years now with 40,000+ street and 1,000+ track miles on them. These have held up amazingly well and do not have any increased NVH at all.The Ground Control STREET/SPORT plate, a special version of their camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control. Camber plates are anodized and the rest of the components are zinc plated for corrosion resistance.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for over 2 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL. Caster adjustment is roughly 3/4 of a degree.Configuration options include 2.25", 2.50", 60mm or Stock springs, low profile dome or standard dome plates, and a Poly spring bushing.Lifetime guarantee on these camber plates, not including bearings.**The included Ground Control nut must be used with these camber plates!**Torque camber plate mounting nuts to 18ft-lbs using a properly calibrated torque wrench. Pneumatic/electric impact gun not recommended. make-bmw,make-bmw-model-3-series,make-bmw-model-3-series-chassis-e46--99-05-,make-bmw-model-3-series-chassis-e46--99-05--submodel-m3 4839222542359 4839222542359_32980162773015 E46 M3 Camber Plates - Street CCPE46M3STREET-28 https://hinzmotorsport.com/products/e46-m3-camber-plates-street Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/e46m3streetcamberplate.jpg?v=1607446628 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 Ohlins 2.25" 449.00 399.00 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/GroundControlE9XM3StreetCamberPlate_417207a2-962a-4dab-912d-2afa2dfa5b4c.jpg?v=1607446632 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/CamberPlateEdited_8d35c83b-30d5-49f3-b200-e95a257e56da.jpg?v=1607446632 BMW E46 M3 Street Camber PlatesWhether you are looking to add more fender clearance for wider wheels and tires, improve the handling of your car, or both, camber plates are the perfect solution.We have been running these plates on our E90 M3 for over three years now with 40,000+ street and 1,000+ track miles on them. These have held up amazingly well and do not have any increased NVH at all.The Ground Control STREET/SPORT plate, a special version of their camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control. Camber plates are anodized and the rest of the components are zinc plated for corrosion resistance.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for over 2 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL. Caster adjustment is roughly 3/4 of a degree.Configuration options include 2.25", 2.50", 60mm or Stock springs, low profile dome or standard dome plates, and a Poly spring bushing.Lifetime guarantee on these camber plates, not including bearings.**The included Ground Control nut must be used with these camber plates!**Torque camber plate mounting nuts to 18ft-lbs using a properly calibrated torque wrench. Pneumatic/electric impact gun not recommended. make-bmw,make-bmw-model-3-series,make-bmw-model-3-series-chassis-e46--99-05-,make-bmw-model-3-series-chassis-e46--99-05--submodel-m3 4839222542359 4839222542359_32980162805783 E46 M3 Camber Plates - Street CCPE46M3STREET-29 https://hinzmotorsport.com/products/e46-m3-camber-plates-street Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/e46m3streetcamberplate.jpg?v=1607446628 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 Ohlins 60mm 449.00 399.00 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/GroundControlE9XM3StreetCamberPlate_417207a2-962a-4dab-912d-2afa2dfa5b4c.jpg?v=1607446632 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/CamberPlateEdited_8d35c83b-30d5-49f3-b200-e95a257e56da.jpg?v=1607446632 BMW E46 M3 Street Camber PlatesWhether you are looking to add more fender clearance for wider wheels and tires, improve the handling of your car, or both, camber plates are the perfect solution.We have been running these plates on our E90 M3 for over three years now with 40,000+ street and 1,000+ track miles on them. These have held up amazingly well and do not have any increased NVH at all.The Ground Control STREET/SPORT plate, a special version of their camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control. Camber plates are anodized and the rest of the components are zinc plated for corrosion resistance.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for over 2 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL. Caster adjustment is roughly 3/4 of a degree.Configuration options include 2.25", 2.50", 60mm or Stock springs, low profile dome or standard dome plates, and a Poly spring bushing.Lifetime guarantee on these camber plates, not including bearings.**The included Ground Control nut must be used with these camber plates!**Torque camber plate mounting nuts to 18ft-lbs using a properly calibrated torque wrench. Pneumatic/electric impact gun not recommended. make-bmw,make-bmw-model-3-series,make-bmw-model-3-series-chassis-e46--99-05-,make-bmw-model-3-series-chassis-e46--99-05--submodel-m3 4839222542359 4839222542359_32980162838551 E46 M3 Camber Plates - Street CCPE46M3STREET-30 https://hinzmotorsport.com/products/e46-m3-camber-plates-street Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/e46m3streetcamberplate.jpg?v=1607446628 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 Ohlins 2.50" 449.00 399.00 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/GroundControlE9XM3StreetCamberPlate_417207a2-962a-4dab-912d-2afa2dfa5b4c.jpg?v=1607446632 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/CamberPlateEdited_8d35c83b-30d5-49f3-b200-e95a257e56da.jpg?v=1607446632 BMW E46 M3 Street Camber PlatesWhether you are looking to add more fender clearance for wider wheels and tires, improve the handling of your car, or both, camber plates are the perfect solution.We have been running these plates on our E90 M3 for over three years now with 40,000+ street and 1,000+ track miles on them. These have held up amazingly well and do not have any increased NVH at all.The Ground Control STREET/SPORT plate, a special version of their camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control. Camber plates are anodized and the rest of the components are zinc plated for corrosion resistance.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for over 2 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL. Caster adjustment is roughly 3/4 of a degree.Configuration options include 2.25", 2.50", 60mm or Stock springs, low profile dome or standard dome plates, and a Poly spring bushing.Lifetime guarantee on these camber plates, not including bearings.**The included Ground Control nut must be used with these camber plates!**Torque camber plate mounting nuts to 18ft-lbs using a properly calibrated torque wrench. Pneumatic/electric impact gun not recommended. make-bmw,make-bmw-model-3-series,make-bmw-model-3-series-chassis-e46--99-05-,make-bmw-model-3-series-chassis-e46--99-05--submodel-m3 4839222542359 4839222542359_32980162871319 E46 M3 Camber Plates - Street CCPE46M3STREET-31 https://hinzmotorsport.com/products/e46-m3-camber-plates-street Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/e46m3streetcamberplate.jpg?v=1607446628 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 Racing Koni Stock 449.00 399.00 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/GroundControlE9XM3StreetCamberPlate_417207a2-962a-4dab-912d-2afa2dfa5b4c.jpg?v=1607446632 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/CamberPlateEdited_8d35c83b-30d5-49f3-b200-e95a257e56da.jpg?v=1607446632 BMW E46 M3 Street Camber PlatesWhether you are looking to add more fender clearance for wider wheels and tires, improve the handling of your car, or both, camber plates are the perfect solution.We have been running these plates on our E90 M3 for over three years now with 40,000+ street and 1,000+ track miles on them. These have held up amazingly well and do not have any increased NVH at all.The Ground Control STREET/SPORT plate, a special version of their camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control. Camber plates are anodized and the rest of the components are zinc plated for corrosion resistance.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for over 2 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL. Caster adjustment is roughly 3/4 of a degree.Configuration options include 2.25", 2.50", 60mm or Stock springs, low profile dome or standard dome plates, and a Poly spring bushing.Lifetime guarantee on these camber plates, not including bearings.**The included Ground Control nut must be used with these camber plates!**Torque camber plate mounting nuts to 18ft-lbs using a properly calibrated torque wrench. Pneumatic/electric impact gun not recommended. make-bmw,make-bmw-model-3-series,make-bmw-model-3-series-chassis-e46--99-05-,make-bmw-model-3-series-chassis-e46--99-05--submodel-m3 4839222542359 4839222542359_32980162904087 E46 M3 Camber Plates - Street CCPE46M3STREET-32 https://hinzmotorsport.com/products/e46-m3-camber-plates-street Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/e46m3streetcamberplate.jpg?v=1607446628 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 Racing Koni 2.25" 449.00 399.00 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/GroundControlE9XM3StreetCamberPlate_417207a2-962a-4dab-912d-2afa2dfa5b4c.jpg?v=1607446632 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/CamberPlateEdited_8d35c83b-30d5-49f3-b200-e95a257e56da.jpg?v=1607446632 BMW E46 M3 Street Camber PlatesWhether you are looking to add more fender clearance for wider wheels and tires, improve the handling of your car, or both, camber plates are the perfect solution.We have been running these plates on our E90 M3 for over three years now with 40,000+ street and 1,000+ track miles on them. These have held up amazingly well and do not have any increased NVH at all.The Ground Control STREET/SPORT plate, a special version of their camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control. Camber plates are anodized and the rest of the components are zinc plated for corrosion resistance.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for over 2 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL. Caster adjustment is roughly 3/4 of a degree.Configuration options include 2.25", 2.50", 60mm or Stock springs, low profile dome or standard dome plates, and a Poly spring bushing.Lifetime guarantee on these camber plates, not including bearings.**The included Ground Control nut must be used with these camber plates!**Torque camber plate mounting nuts to 18ft-lbs using a properly calibrated torque wrench. Pneumatic/electric impact gun not recommended. make-bmw,make-bmw-model-3-series,make-bmw-model-3-series-chassis-e46--99-05-,make-bmw-model-3-series-chassis-e46--99-05--submodel-m3 4839222542359 4839222542359_32980162936855 E46 M3 Camber Plates - Street CCPE46M3STREET-33 https://hinzmotorsport.com/products/e46-m3-camber-plates-street Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/e46m3streetcamberplate.jpg?v=1607446628 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 Racing Koni 60mm 449.00 399.00 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/GroundControlE9XM3StreetCamberPlate_417207a2-962a-4dab-912d-2afa2dfa5b4c.jpg?v=1607446632 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/CamberPlateEdited_8d35c83b-30d5-49f3-b200-e95a257e56da.jpg?v=1607446632 BMW E46 M3 Street Camber PlatesWhether you are looking to add more fender clearance for wider wheels and tires, improve the handling of your car, or both, camber plates are the perfect solution.We have been running these plates on our E90 M3 for over three years now with 40,000+ street and 1,000+ track miles on them. These have held up amazingly well and do not have any increased NVH at all.The Ground Control STREET/SPORT plate, a special version of their camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control. Camber plates are anodized and the rest of the components are zinc plated for corrosion resistance.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for over 2 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL. Caster adjustment is roughly 3/4 of a degree.Configuration options include 2.25", 2.50", 60mm or Stock springs, low profile dome or standard dome plates, and a Poly spring bushing.Lifetime guarantee on these camber plates, not including bearings.**The included Ground Control nut must be used with these camber plates!**Torque camber plate mounting nuts to 18ft-lbs using a properly calibrated torque wrench. Pneumatic/electric impact gun not recommended. make-bmw,make-bmw-model-3-series,make-bmw-model-3-series-chassis-e46--99-05-,make-bmw-model-3-series-chassis-e46--99-05--submodel-m3 4839222542359 4839222542359_32980162969623 E46 M3 Camber Plates - Street CCPE46M3STREET-34 https://hinzmotorsport.com/products/e46-m3-camber-plates-street Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/e46m3streetcamberplate.jpg?v=1607446628 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 Racing Koni 2.50" 449.00 399.00 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/GroundControlE9XM3StreetCamberPlate_417207a2-962a-4dab-912d-2afa2dfa5b4c.jpg?v=1607446632 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/CamberPlateEdited_8d35c83b-30d5-49f3-b200-e95a257e56da.jpg?v=1607446632 BMW E46 M3 Street Camber PlatesWhether you are looking to add more fender clearance for wider wheels and tires, improve the handling of your car, or both, camber plates are the perfect solution.We have been running these plates on our E90 M3 for over three years now with 40,000+ street and 1,000+ track miles on them. These have held up amazingly well and do not have any increased NVH at all.The Ground Control STREET/SPORT plate, a special version of their camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control. Camber plates are anodized and the rest of the components are zinc plated for corrosion resistance.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for over 2 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL. Caster adjustment is roughly 3/4 of a degree.Configuration options include 2.25", 2.50", 60mm or Stock springs, low profile dome or standard dome plates, and a Poly spring bushing.Lifetime guarantee on these camber plates, not including bearings.**The included Ground Control nut must be used with these camber plates!**Torque camber plate mounting nuts to 18ft-lbs using a properly calibrated torque wrench. Pneumatic/electric impact gun not recommended. make-bmw,make-bmw-model-3-series,make-bmw-model-3-series-chassis-e46--99-05-,make-bmw-model-3-series-chassis-e46--99-05--submodel-m3 4839222542359 4839222542359_32980163002391 E46 M3 Camber Plates - Street CCPE46M3STREET-35 https://hinzmotorsport.com/products/e46-m3-camber-plates-street Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/e46m3streetcamberplate.jpg?v=1607446628 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 Other (Write under "Notes" section in shopping cart) Stock 449.00 399.00 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/GroundControlE9XM3StreetCamberPlate_417207a2-962a-4dab-912d-2afa2dfa5b4c.jpg?v=1607446632 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/CamberPlateEdited_8d35c83b-30d5-49f3-b200-e95a257e56da.jpg?v=1607446632 BMW E46 M3 Street Camber PlatesWhether you are looking to add more fender clearance for wider wheels and tires, improve the handling of your car, or both, camber plates are the perfect solution.We have been running these plates on our E90 M3 for over three years now with 40,000+ street and 1,000+ track miles on them. These have held up amazingly well and do not have any increased NVH at all.The Ground Control STREET/SPORT plate, a special version of their camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control. Camber plates are anodized and the rest of the components are zinc plated for corrosion resistance.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for over 2 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL. Caster adjustment is roughly 3/4 of a degree.Configuration options include 2.25", 2.50", 60mm or Stock springs, low profile dome or standard dome plates, and a Poly spring bushing.Lifetime guarantee on these camber plates, not including bearings.**The included Ground Control nut must be used with these camber plates!**Torque camber plate mounting nuts to 18ft-lbs using a properly calibrated torque wrench. Pneumatic/electric impact gun not recommended. make-bmw,make-bmw-model-3-series,make-bmw-model-3-series-chassis-e46--99-05-,make-bmw-model-3-series-chassis-e46--99-05--submodel-m3 4839222542359 4839222542359_32980163035159 E46 M3 Camber Plates - Street CCPE46M3STREET-35 https://hinzmotorsport.com/products/e46-m3-camber-plates-street Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/e46m3streetcamberplate.jpg?v=1607446628 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 Other (Write under "Notes" section in shopping cart) 2.25" 449.00 399.00 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/GroundControlE9XM3StreetCamberPlate_417207a2-962a-4dab-912d-2afa2dfa5b4c.jpg?v=1607446632 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/CamberPlateEdited_8d35c83b-30d5-49f3-b200-e95a257e56da.jpg?v=1607446632 BMW E46 M3 Street Camber PlatesWhether you are looking to add more fender clearance for wider wheels and tires, improve the handling of your car, or both, camber plates are the perfect solution.We have been running these plates on our E90 M3 for over three years now with 40,000+ street and 1,000+ track miles on them. These have held up amazingly well and do not have any increased NVH at all.The Ground Control STREET/SPORT plate, a special version of their camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control. Camber plates are anodized and the rest of the components are zinc plated for corrosion resistance.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for over 2 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL. Caster adjustment is roughly 3/4 of a degree.Configuration options include 2.25", 2.50", 60mm or Stock springs, low profile dome or standard dome plates, and a Poly spring bushing.Lifetime guarantee on these camber plates, not including bearings.**The included Ground Control nut must be used with these camber plates!**Torque camber plate mounting nuts to 18ft-lbs using a properly calibrated torque wrench. Pneumatic/electric impact gun not recommended. make-bmw,make-bmw-model-3-series,make-bmw-model-3-series-chassis-e46--99-05-,make-bmw-model-3-series-chassis-e46--99-05--submodel-m3 4839222542359 4839222542359_32980163100695 E46 M3 Camber Plates - Street CCPE46M3STREET-36 https://hinzmotorsport.com/products/e46-m3-camber-plates-street Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/e46m3streetcamberplate.jpg?v=1607446628 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 Other (Write under "Notes" section in shopping cart) 60mm 449.00 399.00 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/GroundControlE9XM3StreetCamberPlate_417207a2-962a-4dab-912d-2afa2dfa5b4c.jpg?v=1607446632 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/CamberPlateEdited_8d35c83b-30d5-49f3-b200-e95a257e56da.jpg?v=1607446632 BMW E46 M3 Street Camber PlatesWhether you are looking to add more fender clearance for wider wheels and tires, improve the handling of your car, or both, camber plates are the perfect solution.We have been running these plates on our E90 M3 for over three years now with 40,000+ street and 1,000+ track miles on them. These have held up amazingly well and do not have any increased NVH at all.The Ground Control STREET/SPORT plate, a special version of their camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control. Camber plates are anodized and the rest of the components are zinc plated for corrosion resistance.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for over 2 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL. Caster adjustment is roughly 3/4 of a degree.Configuration options include 2.25", 2.50", 60mm or Stock springs, low profile dome or standard dome plates, and a Poly spring bushing.Lifetime guarantee on these camber plates, not including bearings.**The included Ground Control nut must be used with these camber plates!**Torque camber plate mounting nuts to 18ft-lbs using a properly calibrated torque wrench. Pneumatic/electric impact gun not recommended. make-bmw,make-bmw-model-3-series,make-bmw-model-3-series-chassis-e46--99-05-,make-bmw-model-3-series-chassis-e46--99-05--submodel-m3 4839222542359 4839222542359_32980163133463 E46 M3 Camber Plates - Street CCPE46M3STREET-37 https://hinzmotorsport.com/products/e46-m3-camber-plates-street Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/e46m3streetcamberplate.jpg?v=1607446628 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 Other (Write under "Notes" section in shopping cart) 2.50" 449.00 399.00 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/GroundControlE9XM3StreetCamberPlate_417207a2-962a-4dab-912d-2afa2dfa5b4c.jpg?v=1607446632 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/CamberPlateEdited_8d35c83b-30d5-49f3-b200-e95a257e56da.jpg?v=1607446632 BMW E46 M3 Street Camber PlatesWhether you are looking to add more fender clearance for wider wheels and tires, improve the handling of your car, or both, camber plates are the perfect solution.We have been running these plates on our E90 M3 for over three years now with 40,000+ street and 1,000+ track miles on them. These have held up amazingly well and do not have any increased NVH at all.The Ground Control STREET/SPORT plate, a special version of their camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control. Camber plates are anodized and the rest of the components are zinc plated for corrosion resistance.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for over 2 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL. Caster adjustment is roughly 3/4 of a degree.Configuration options include 2.25", 2.50", 60mm or Stock springs, low profile dome or standard dome plates, and a Poly spring bushing.Lifetime guarantee on these camber plates, not including bearings.**The included Ground Control nut must be used with these camber plates!**Torque camber plate mounting nuts to 18ft-lbs using a properly calibrated torque wrench. Pneumatic/electric impact gun not recommended. make-bmw,make-bmw-model-3-series,make-bmw-model-3-series-chassis-e46--99-05-,make-bmw-model-3-series-chassis-e46--99-05--submodel-m3 4533511356439 4533511356439_31749718081559 17x9" ET30 APEX ARC-8 Wheel (Deep) ARC8179ET30AN https://hinzmotorsport.com/products/17x9-et30-apex-arc-8-wheel-deep Apex Race Parts https://cdn.shopify.com/s/files/1/0045/1179/3186/products/17-ARC-8-SMBK-Profile3_8acc373a-59ec-4f53-b4de-1c241a9eec5b.jpg?v=1599591962 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/17-ARC-8-AN-Profile3_8ed7a426-aaa8-4ce0-ac8e-94d04d078efb.jpg?v=1608575980 true 7484 g 0 Anthracite 274.00 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/17-ARC-8-HS-Profile3_72e1f89b-25f2-40e5-8ff4-553bbcab31d1.jpg?v=1608575980 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/17-ARC-8-HB-Profile3_8a071665-e13a-4616-9d9c-89ec62ab0cf8.jpg?v=1608575980 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/17-ARC-8-AN-Profile3_8ed7a426-aaa8-4ce0-ac8e-94d04d078efb.jpg?v=1608575980 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/17-ARC8-5120-SBZ-Profile3.png?v=1608575980 Wheel SpecificationsWheel Construction: Flow FormedModel: ARC-8Size: 17x9" ET30Offset (mm): 30Face Profile: Profile 3; Deep ConcavityWeight (lbs): 16.5Bolt Pattern: 5x120mmCenter Bore: 72.56Load Rating: 1,450 lbsIf you're in the market for wheels for your street, track, or race car look no further than Apex Wheels. Apex Wheels have been around for quite some time now and offer the perfect balance between strength, weight, and cost. These wheels are proven many times over on racetracks across the country and around the world. With countless sizes, offsets, models, and colors available you are sure to find something for your car that meets your fitment and style. We have been running Apex Wheels on our heavy Hinz Motorsport M3 test vehicle for several years now without any issues despite countless excursions over potholes and race track curbing. These wheels are lighter than stock and certainly look the business.In addition to all of the aforementioned attributes, APEX Wheels offer superb brake caliper clearances for those running big brake kits. In addition to FEA performed on each wheel design, extensive 3rd party testing is also conducted on every wheel shape and size to ensure that the wheels exceed all safety standards. Simply put, these wheels are certifiably strong and will withstand abuse so that you can buy with confidence.These are all just a few reasons why APEX Wheels are quickly becoming the go-to choice for car enthusiasts around the globe.Please chat with us or give us a call before placing an order if you're unsure of fitment. 414-212-5679 4533511356439 4533511356439_31749718114327 17x9" ET30 APEX ARC-8 Wheel (Deep) ARC8179ET30HS https://hinzmotorsport.com/products/17x9-et30-apex-arc-8-wheel-deep Apex Race Parts https://cdn.shopify.com/s/files/1/0045/1179/3186/products/17-ARC-8-SMBK-Profile3_8acc373a-59ec-4f53-b4de-1c241a9eec5b.jpg?v=1599591962 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/17-ARC-8-HS-Profile3_72e1f89b-25f2-40e5-8ff4-553bbcab31d1.jpg?v=1608575980 true 7484 g 0 Hyper Silver 274.00 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/17-ARC-8-HS-Profile3_72e1f89b-25f2-40e5-8ff4-553bbcab31d1.jpg?v=1608575980 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/17-ARC-8-HB-Profile3_8a071665-e13a-4616-9d9c-89ec62ab0cf8.jpg?v=1608575980 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/17-ARC-8-AN-Profile3_8ed7a426-aaa8-4ce0-ac8e-94d04d078efb.jpg?v=1608575980 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/17-ARC8-5120-SBZ-Profile3.png?v=1608575980 Wheel SpecificationsWheel Construction: Flow FormedModel: ARC-8Size: 17x9" ET30Offset (mm): 30Face Profile: Profile 3; Deep ConcavityWeight (lbs): 16.5Bolt Pattern: 5x120mmCenter Bore: 72.56Load Rating: 1,450 lbsIf you're in the market for wheels for your street, track, or race car look no further than Apex Wheels. Apex Wheels have been around for quite some time now and offer the perfect balance between strength, weight, and cost. These wheels are proven many times over on racetracks across the country and around the world. With countless sizes, offsets, models, and colors available you are sure to find something for your car that meets your fitment and style. We have been running Apex Wheels on our heavy Hinz Motorsport M3 test vehicle for several years now without any issues despite countless excursions over potholes and race track curbing. These wheels are lighter than stock and certainly look the business.In addition to all of the aforementioned attributes, APEX Wheels offer superb brake caliper clearances for those running big brake kits. In addition to FEA performed on each wheel design, extensive 3rd party testing is also conducted on every wheel shape and size to ensure that the wheels exceed all safety standards. Simply put, these wheels are certifiably strong and will withstand abuse so that you can buy with confidence.These are all just a few reasons why APEX Wheels are quickly becoming the go-to choice for car enthusiasts around the globe.Please chat with us or give us a call before placing an order if you're unsure of fitment. 414-212-5679 4533511356439 4533511356439_31749718147095 17x9" ET30 APEX ARC-8 Wheel (Deep) ARC8179ET30NHBK https://hinzmotorsport.com/products/17x9-et30-apex-arc-8-wheel-deep Apex Race Parts https://cdn.shopify.com/s/files/1/0045/1179/3186/products/17-ARC-8-SMBK-Profile3_8acc373a-59ec-4f53-b4de-1c241a9eec5b.jpg?v=1599591962 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/17-ARC-8-HB-Profile3_8a071665-e13a-4616-9d9c-89ec62ab0cf8.jpg?v=1608575980 true 7484 g 0 Hyper Black 274.00 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/17-ARC-8-HS-Profile3_72e1f89b-25f2-40e5-8ff4-553bbcab31d1.jpg?v=1608575980 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/17-ARC-8-HB-Profile3_8a071665-e13a-4616-9d9c-89ec62ab0cf8.jpg?v=1608575980 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/17-ARC-8-AN-Profile3_8ed7a426-aaa8-4ce0-ac8e-94d04d078efb.jpg?v=1608575980 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/17-ARC8-5120-SBZ-Profile3.png?v=1608575980 Wheel SpecificationsWheel Construction: Flow FormedModel: ARC-8Size: 17x9" ET30Offset (mm): 30Face Profile: Profile 3; Deep ConcavityWeight (lbs): 16.5Bolt Pattern: 5x120mmCenter Bore: 72.56Load Rating: 1,450 lbsIf you're in the market for wheels for your street, track, or race car look no further than Apex Wheels. Apex Wheels have been around for quite some time now and offer the perfect balance between strength, weight, and cost. These wheels are proven many times over on racetracks across the country and around the world. With countless sizes, offsets, models, and colors available you are sure to find something for your car that meets your fitment and style. We have been running Apex Wheels on our heavy Hinz Motorsport M3 test vehicle for several years now without any issues despite countless excursions over potholes and race track curbing. These wheels are lighter than stock and certainly look the business.In addition to all of the aforementioned attributes, APEX Wheels offer superb brake caliper clearances for those running big brake kits. In addition to FEA performed on each wheel design, extensive 3rd party testing is also conducted on every wheel shape and size to ensure that the wheels exceed all safety standards. Simply put, these wheels are certifiably strong and will withstand abuse so that you can buy with confidence.These are all just a few reasons why APEX Wheels are quickly becoming the go-to choice for car enthusiasts around the globe.Please chat with us or give us a call before placing an order if you're unsure of fitment. 414-212-5679 4533511356439 4533511356439_31749718179863 17x9" ET30 APEX ARC-8 Wheel (Deep) ARC8179ET30SMBK https://hinzmotorsport.com/products/17x9-et30-apex-arc-8-wheel-deep Apex Race Parts https://cdn.shopify.com/s/files/1/0045/1179/3186/products/17-ARC-8-SMBK-Profile3_8acc373a-59ec-4f53-b4de-1c241a9eec5b.jpg?v=1599591962 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/17-ARC-8-SMBK-Profile3_8acc373a-59ec-4f53-b4de-1c241a9eec5b.jpg?v=1608575980 true 7484 g 0 Satin Black 274.00 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/17-ARC-8-HS-Profile3_72e1f89b-25f2-40e5-8ff4-553bbcab31d1.jpg?v=1608575980 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/17-ARC-8-HB-Profile3_8a071665-e13a-4616-9d9c-89ec62ab0cf8.jpg?v=1608575980 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/17-ARC-8-AN-Profile3_8ed7a426-aaa8-4ce0-ac8e-94d04d078efb.jpg?v=1608575980 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/17-ARC8-5120-SBZ-Profile3.png?v=1608575980 Wheel SpecificationsWheel Construction: Flow FormedModel: ARC-8Size: 17x9" ET30Offset (mm): 30Face Profile: Profile 3; Deep ConcavityWeight (lbs): 16.5Bolt Pattern: 5x120mmCenter Bore: 72.56Load Rating: 1,450 lbsIf you're in the market for wheels for your street, track, or race car look no further than Apex Wheels. Apex Wheels have been around for quite some time now and offer the perfect balance between strength, weight, and cost. These wheels are proven many times over on racetracks across the country and around the world. With countless sizes, offsets, models, and colors available you are sure to find something for your car that meets your fitment and style. We have been running Apex Wheels on our heavy Hinz Motorsport M3 test vehicle for several years now without any issues despite countless excursions over potholes and race track curbing. These wheels are lighter than stock and certainly look the business.In addition to all of the aforementioned attributes, APEX Wheels offer superb brake caliper clearances for those running big brake kits. In addition to FEA performed on each wheel design, extensive 3rd party testing is also conducted on every wheel shape and size to ensure that the wheels exceed all safety standards. Simply put, these wheels are certifiably strong and will withstand abuse so that you can buy with confidence.These are all just a few reasons why APEX Wheels are quickly becoming the go-to choice for car enthusiasts around the globe.Please chat with us or give us a call before placing an order if you're unsure of fitment. 414-212-5679 4533511356439 4533511356439_31749718212631 17x9" ET30 APEX ARC-8 Wheel (Deep) ARC8179ET30MBZ https://hinzmotorsport.com/products/17x9-et30-apex-arc-8-wheel-deep Apex Race Parts https://cdn.shopify.com/s/files/1/0045/1179/3186/products/17-ARC-8-SMBK-Profile3_8acc373a-59ec-4f53-b4de-1c241a9eec5b.jpg?v=1599591962 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/17-ARC8-5120-SBZ-Profile3.png?v=1608575980 true 7484 g 0 Matte Bronze 274.00 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/17-ARC-8-HS-Profile3_72e1f89b-25f2-40e5-8ff4-553bbcab31d1.jpg?v=1608575980 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/17-ARC-8-HB-Profile3_8a071665-e13a-4616-9d9c-89ec62ab0cf8.jpg?v=1608575980 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/17-ARC-8-AN-Profile3_8ed7a426-aaa8-4ce0-ac8e-94d04d078efb.jpg?v=1608575980 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/17-ARC8-5120-SBZ-Profile3.png?v=1608575980 Wheel SpecificationsWheel Construction: Flow FormedModel: ARC-8Size: 17x9" ET30Offset (mm): 30Face Profile: Profile 3; Deep ConcavityWeight (lbs): 16.5Bolt Pattern: 5x120mmCenter Bore: 72.56Load Rating: 1,450 lbsIf you're in the market for wheels for your street, track, or race car look no further than Apex Wheels. Apex Wheels have been around for quite some time now and offer the perfect balance between strength, weight, and cost. These wheels are proven many times over on racetracks across the country and around the world. With countless sizes, offsets, models, and colors available you are sure to find something for your car that meets your fitment and style. We have been running Apex Wheels on our heavy Hinz Motorsport M3 test vehicle for several years now without any issues despite countless excursions over potholes and race track curbing. These wheels are lighter than stock and certainly look the business.In addition to all of the aforementioned attributes, APEX Wheels offer superb brake caliper clearances for those running big brake kits. In addition to FEA performed on each wheel design, extensive 3rd party testing is also conducted on every wheel shape and size to ensure that the wheels exceed all safety standards. Simply put, these wheels are certifiably strong and will withstand abuse so that you can buy with confidence.These are all just a few reasons why APEX Wheels are quickly becoming the go-to choice for car enthusiasts around the globe.Please chat with us or give us a call before placing an order if you're unsure of fitment. 414-212-5679 4521014591511 4521014591511_31713621540887 PFC 11 Brake Pads- PFC Z45 Caliper 7852.11.24.44 https://hinzmotorsport.com/products/pfc-11-brake-pads-pfc-z45-caliper Performance Friction Brakes https://cdn.shopify.com/s/files/1/0045/1179/3186/products/pfc7852.jpg?v=1601928526 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 3175 g 1 Default Title 419.99 398.99 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/PFCZ45Caliper.jpg?v=1601928529 PFC 11 Racing Pads for PFC Z45 BBK Caliper.Part #: 7852.11.24.44PFC Brakes are a leader in high-performance braking technology. Manufactured right here in the U.S., PFC has been the go-to choice for many top racing teams around the world. They have worked closely with BMW & Porsche on the development of their pad compounds and PFC Brakes are even standard fitment on Porsche 991 GT3 Cup cars.Biggest Takeaway?We run PFC brakes on our cars for their consistent performance lap-after-lap and their low-wear rates. These things do not overheat either. While you may pay a little bit more for these pads upfront compared to say a Hawk pad, these will last twice as long if not more in many applications. In addition to decreased wear on the pad itself, these pads are also a lot less harsh on rotors. The savings really start to add up compared to inferior brands. In any braking application, you are generally limited by the grip in your tires, these pads will provide all of the stopping power you need.PFC's can also be used on the street when driving from to and from the track. Like any race pad, they will not have as much bite in the cold, but they will work fine in a pinch. Sometimes they squeak, sometimes they don't, but it generally isn't too bad when they do.11 Compound is a new generation sprint and medium distance friction u2014the ultimate in control, with superior disc conditioning. 11 compounds were developed from the 01 compound with improved bite, modulation, and release characteristics. It is ultra smooth and developed to reduce wheel locking at the end of a stop. Brake with confidenceu2014brake with ultimate control and modulation. For many applications, 11 will replace the venerable 01 compound.Typical applications; Ideal use for medium-low grip venues where control and modulation are at a premium. Also racing venues where ABS systems are used, .11 can be used in a large spectrum of temperature ranges. 11's wear is par with PFC's legendary 01 compound. Virtually zero taper wear when raced in a properly designed race caliper.Z-Rated - High-Performance Street - This compound has been developed for fast road/track day applications. It provides more stopping power and increased fade resistance over the std OE materials but retains the good qualities of the road pad i.e., low dusting and noise along with low wear rate. Typical Applications; This compound can be used in OE calipers or aftermarket brake kits in applications where an increase in performance is required over the standard OE friction material. Generally recommended as predominately a street pad. 1704515305506 1704515305506_33013100642327 PFC 08 Front Racing Brake Pads E9X M3 - E90 M3, E92 M3, E93 M3 0918.08.19.44 https://hinzmotorsport.com/products/pfc-08-front-racing-brake-pads-e9x-m3-e90-m3-e92-m3-e93-m3 Performance Friction Brakes https://cdn.shopify.com/s/files/1/0045/1179/3186/products/0918.xx.19.44.png?v=1569281890 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/0918.xx.19.44.png?v=1601929946 true 2177 g 1 8 289.95 274.99 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/IMG_20181118_085857971_HDR.jpg?v=1601929946 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/IMG_20181117_161234621.jpg?v=1561075750 PFC 08 Racing Pads for E9x M3 (Stock Front Caliper)Part #: 0918.08.19.44PFC Brakes are a leader in high-performance braking technology. Manufactured right here in the U.S., PFC has been the go-to choice for many top racing teams around the world. They have worked closely with BMW & Porsche on the development of their pad compounds and PFC Brakes are standard fitment on Porsche 991 GT3 Cup cars.Biggest Takeaway?We run PFC brakes on our cars for their consistent performance lap-after-lap and their low-wear rates. These things do not overheat either. While you may pay a little bit more for these pads upfront compared to say a Hawk pad, these will last twice as long if not more in many applications. In addition to decreased wear on the pad itself, these pads are also a lot less harsh on rotors. The savings really start to add up compared to inferior brands. In any braking application, you are generally limited by the grip in your tires, these pads will provide all of the stopping power you need.PFC's can also be used on the street when driving from to and from the track. Like any race pad, they will not have as much bite it the cold, but they will work fine in a pinch. Sometimes they squeak, sometimes they don't, but it generally isn't too bad when they do.For the 0918 Pad they are available in the following 2 compounds (application dependent):11 Compound - Strong Initial Bite - Sprint Racing - is a sprint and medium distance friction providing the ultimate in control, with superior disc conditioning. It is ultra smooth and developed to reduce wheel locking at the end of a stop. Typical Applications; Ideal for use at medium-low grip venues where control and modulation are at a premium. 11's wear is par with PFC's legendary 01 compound showing virtually zero taper wear when raced in a properly designed race caliper.08 Compound - Smooth Bite - Endurance Racing - 08 compounds are one of PFC's most popular and have gained immediate favor in Trackday/HPDE, Endurance Sportscar, and GT racing due to its performance in applications where smooth initial bite is a must. 08 have a slight friction rise with temperature, excellent release, and modulation characteristics. Very low abraded disc wear with a fine grey slate like disc finish, similar to 01. Despite its considerable performance, 08 wears the longest of all PFC pads and easily matches wear of the other competitors with much higher bite.All Fitments (Stock Front Calipers):1 SeriesE82 / E88 (08-13) > 1M (11-12)3 SeriesE90 / E91 / E92 / E93 (06-13) > 328iE90 / E91 / E92 / E93 (06-13) > 328xiE90 / E91 / E92 / E93 (06-13) > 335iE90 / E91 / E92 / E93 (06-13) > 335isE90 / E91 / E92 / E93 (06-13) > 335xiE90 / E91 / E92 / E93 (06-13) > M3Fitment notes for E9X 328i: A) fits 2008-2013 coupe, sedan, wagon models (and 2007-2013 328i convertible) B) retaining spring clip on outboard pad must be removedmake-bmw,make-bmw-model-1-series,make-bmw-model-1-series-chassis-e82--2008-13-,make-bmw-model-1-series-chassis-e82--2008-13--submodel-1m,make-bmw-model-3-series,make-bmw-model-3-series-chassis-e90-e92-e93--2006-13-,make-bmw-model-3-series-chassis-e90-e92-e93--2006-13--submodel-m3 4536333238295 4536333238295_31756471304215 APEX 12mm BMW Spacer Kit HW-APX-SPCR-5120-7256-12-B https://hinzmotorsport.com/products/apex-12mm-bmw-spacer-kit Apex Race Parts https://cdn.shopify.com/s/files/1/0045/1179/3186/products/Apex12mmSpacerBlack.jpg?v=1599838042 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/Apex12mmSpacerBlack.jpg?v=1599838052 true 1179 g 0 Black 84.99 SpecsThickness: 12mmBolt Pattern: 5x120mmCenter Bore: 72.56mmExtended Hardware Options: NoFeaturesHubcentricCNC ConstructionSilver or Black Color OptionsAnodized Finish6061-T6 AluminumLaser Engraved Part IdentificationEasily Identifiable Spacer Size on Outer Circumference Machined Pry Points to Help Remove Stuck SpacersChamfered Edges, Eliminated Stress-RisersWhy Spacers?Spacers can offer a number of benefits including:Wheel/tire to suspension clearanceAllows you to run a wider tire when more camber is appliedFlush Fitment to FenderAdditional brake clearance, especially when running a BBKVehicle Application1 SeriesE81/2, E87/8, E87 1M, F20/12 SeriesF22, F453 SeriesE30 M3, E36 M3, E36 Non-M, E46 M3, E46 Non-M, E9X M3, E9X Non-M, F3X Non-M, F8X M34 SeriesF3X Non-M, F8X M45 SeriesE28 Non-M, E28 M5, E34 Non-M, E34 M5, E60 Non-M, E60 M5, F10 Non-M, F10 M56 SeriesE24 Non-M, E24 M6, E6X Non-M, E63/4 M6, F1X Non-M, F12/3 M6, F06 Non-M, F06 M67 SeriesE23, E32, E38, E6X, F01/28 SeriesE31X SeriesE84 X1, E83 X3, F25 X3Z SeriesE36-7/8, E52, E85/6, E89 WARNINGWheel spacers are not intended to be stacked and doing so may result in damage or injury. Proper length extended hardware MUST be used in conjunction with wheel spacers. These spacers will not fit the BMW E39 5-series/M5, E70 X5, or E71 X6. This is because the center bore is 74.1mm as opposed to this spacer's 72.56mm center bore. 4536333238295 4536333238295_31756471336983 APEX 12mm BMW Spacer Kit HW-APX-SPCR-5120-7256-12-S https://hinzmotorsport.com/products/apex-12mm-bmw-spacer-kit Apex Race Parts https://cdn.shopify.com/s/files/1/0045/1179/3186/products/Apex12mmSpacerBlack.jpg?v=1599838042 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/Apex12mmSpacerSilver.jpg?v=1599838052 true 1179 g 0 Silver 84.99 SpecsThickness: 12mmBolt Pattern: 5x120mmCenter Bore: 72.56mmExtended Hardware Options: NoFeaturesHubcentricCNC ConstructionSilver or Black Color OptionsAnodized Finish6061-T6 AluminumLaser Engraved Part IdentificationEasily Identifiable Spacer Size on Outer Circumference Machined Pry Points to Help Remove Stuck SpacersChamfered Edges, Eliminated Stress-RisersWhy Spacers?Spacers can offer a number of benefits including:Wheel/tire to suspension clearanceAllows you to run a wider tire when more camber is appliedFlush Fitment to FenderAdditional brake clearance, especially when running a BBKVehicle Application1 SeriesE81/2, E87/8, E87 1M, F20/12 SeriesF22, F453 SeriesE30 M3, E36 M3, E36 Non-M, E46 M3, E46 Non-M, E9X M3, E9X Non-M, F3X Non-M, F8X M34 SeriesF3X Non-M, F8X M45 SeriesE28 Non-M, E28 M5, E34 Non-M, E34 M5, E60 Non-M, E60 M5, F10 Non-M, F10 M56 SeriesE24 Non-M, E24 M6, E6X Non-M, E63/4 M6, F1X Non-M, F12/3 M6, F06 Non-M, F06 M67 SeriesE23, E32, E38, E6X, F01/28 SeriesE31X SeriesE84 X1, E83 X3, F25 X3Z SeriesE36-7/8, E52, E85/6, E89 WARNINGWheel spacers are not intended to be stacked and doing so may result in damage or injury. Proper length extended hardware MUST be used in conjunction with wheel spacers. These spacers will not fit the BMW E39 5-series/M5, E70 X5, or E71 X6. This is because the center bore is 74.1mm as opposed to this spacer's 72.56mm center bore. 4521019998231 4521019998231_33013100150807 PFC Racing Brake Pads- PFC ZR29 Caliper 7832.08.14.54 https://hinzmotorsport.com/products/pfc-racing-brake-pads-pfc-zr29-caliper Performance Friction Brakes https://cdn.shopify.com/s/files/1/0045/1179/3186/products/pfc7832_7929.png?v=1601918160 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 2948 g 1 8 335.99 PFC Racing Brake Pads for PFC Z29 BBK Caliper.PFC Brakes are a leader in high-performance braking technology. Manufactured right here in the U.S., PFC has been the go-to choice for many top racing teams around the world. They have worked closely with Porsche on the development of their pad compounds and PFC Brakes are standard fitment on Porsche 991 GT3 Cup cars.Biggest Takeaway?We run PFC brakes on our cars for their consistent performance lap-after-lap and their low-wear rates. These things do not overheat either. While you may pay a little bit more for these pads upfront compared to say a Hawk pad, these will last twice as long if not more in many applications. In addition to decreased wear on the pad itself, these pads are also a lot less harsh on rotors. The savings really start to add up compared to inferior brands. In any braking application, you are generally limited by the grip in your tires, these pads will provide all of the stopping power you need.PFC's can also be used on the street when driving from to and from the track. Like any race pad, they will not have as much bite it the cold, but they will work fine in a pinch. Sometimes they squeak, sometimes they don't, but it generally isn't too bad when they do.For the 7832 Pad they are available in the following 5 compounds (application dependent):08 Compound - Smooth Bite - Endurance Racing - 08 compounds are one of PFC's most popular and have gained immediate favor in Trackday/HPDE, Endurance Sportscar, and GT racing due to its performance in applications where smooth initial bite is a must. 08 have a slight friction rise with temperature, excellent release, and modulation characteristics. Very low abraded disc wear with a fine grey slate like disc finish, similar to 01. Despite its considerable performance, 08 wears the longest of all PFC pads and easily matches wear of the other competitors with much higher bite.11 Compound - Strong Initial Bite - Sprint Racing - is a sprint and medium distance friction providing the ultimate in control, with superior disc conditioning. It is ultra smooth and developed to reduce wheel locking at the end of a stop. Typical Applications; Ideal for use at medium-low grip venues where control and modulation are at a premium. 11's wear is par with PFC's legendary 01 compound showing virtually zero taper wear when raced in a properly designed race caliper.13 Compound - High Bite - Sprint Racing - 13 Compound is a new generation of ultimate high bite - high friction... 13 compounds were developed from 01 compound with increased bite, modulation, with superior disc conditioning and release characteristics for exceptional control. Ultra-smooth and great for tracks with high grip or high downforce cars. This material won its first race on its first outing - it's that good. It is the ultimate combination of high bite and infinite control. Typical applications; Ideal use for sprint and severe applications. Heavy, fast cars or high downforce cars where bite at first 3rd of the stop is desired. 13's wear is par with PFC's legendary 01 compound. Will operate at higher temperatures if called too as .13 has a very high threshold for fade resistance. .13 has shown of all the high bite, high torque pads in the market to have one of the lowest taper wear in a properly designed race caliper.15 Compound - Higher Cold Bite - Sprint/Endurance Racing - The new generation 15 compound is becoming very popular due to its excellent braking characteristics. Very good in all conditions and excellent when running at high temperatures. Its easy control and release are appreciated by engineers and drivers. Gentle on discs and low wear rate are other excellent virtues. 15 is a great compound winner in different GT3/GT4 races or open-wheel categories such as US F3, F3, and Indy Lights. It has better cold bite than 11 or 13. The 15 is one of the most complete PFC compounds. 15 works very well with modern racing ABS. Typical Applications: GT3, GT4 front, Touring cars, Formula 3, F3R, Indy series Z-Rated - High Performance Street - This compound has been developed for fast road/track day applications. It provides more stopping power and increased fade resistance over the std OE materials but retains the good qualities of the road pad i.e., low dusting and noise along with low wear rate. Typical Applications; This compound can be used in OE calipers or aftermarket brake kits in applications where an increase in performance is required over the standard OE friction material. Generally recommended as predominately a street pad. 4521019998231 4521019998231_31713639235607 PFC Racing Brake Pads- PFC ZR29 Caliper 7832.13.14.54 https://hinzmotorsport.com/products/pfc-racing-brake-pads-pfc-zr29-caliper Performance Friction Brakes https://cdn.shopify.com/s/files/1/0045/1179/3186/products/pfc7832_7929.png?v=1601918160 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 2948 g 1 13 335.99 PFC Racing Brake Pads for PFC Z29 BBK Caliper.PFC Brakes are a leader in high-performance braking technology. Manufactured right here in the U.S., PFC has been the go-to choice for many top racing teams around the world. They have worked closely with Porsche on the development of their pad compounds and PFC Brakes are standard fitment on Porsche 991 GT3 Cup cars.Biggest Takeaway?We run PFC brakes on our cars for their consistent performance lap-after-lap and their low-wear rates. These things do not overheat either. While you may pay a little bit more for these pads upfront compared to say a Hawk pad, these will last twice as long if not more in many applications. In addition to decreased wear on the pad itself, these pads are also a lot less harsh on rotors. The savings really start to add up compared to inferior brands. In any braking application, you are generally limited by the grip in your tires, these pads will provide all of the stopping power you need.PFC's can also be used on the street when driving from to and from the track. Like any race pad, they will not have as much bite it the cold, but they will work fine in a pinch. Sometimes they squeak, sometimes they don't, but it generally isn't too bad when they do.For the 7832 Pad they are available in the following 5 compounds (application dependent):08 Compound - Smooth Bite - Endurance Racing - 08 compounds are one of PFC's most popular and have gained immediate favor in Trackday/HPDE, Endurance Sportscar, and GT racing due to its performance in applications where smooth initial bite is a must. 08 have a slight friction rise with temperature, excellent release, and modulation characteristics. Very low abraded disc wear with a fine grey slate like disc finish, similar to 01. Despite its considerable performance, 08 wears the longest of all PFC pads and easily matches wear of the other competitors with much higher bite.11 Compound - Strong Initial Bite - Sprint Racing - is a sprint and medium distance friction providing the ultimate in control, with superior disc conditioning. It is ultra smooth and developed to reduce wheel locking at the end of a stop. Typical Applications; Ideal for use at medium-low grip venues where control and modulation are at a premium. 11's wear is par with PFC's legendary 01 compound showing virtually zero taper wear when raced in a properly designed race caliper.13 Compound - High Bite - Sprint Racing - 13 Compound is a new generation of ultimate high bite - high friction... 13 compounds were developed from 01 compound with increased bite, modulation, with superior disc conditioning and release characteristics for exceptional control. Ultra-smooth and great for tracks with high grip or high downforce cars. This material won its first race on its first outing - it's that good. It is the ultimate combination of high bite and infinite control. Typical applications; Ideal use for sprint and severe applications. Heavy, fast cars or high downforce cars where bite at first 3rd of the stop is desired. 13's wear is par with PFC's legendary 01 compound. Will operate at higher temperatures if called too as .13 has a very high threshold for fade resistance. .13 has shown of all the high bite, high torque pads in the market to have one of the lowest taper wear in a properly designed race caliper.15 Compound - Higher Cold Bite - Sprint/Endurance Racing - The new generation 15 compound is becoming very popular due to its excellent braking characteristics. Very good in all conditions and excellent when running at high temperatures. Its easy control and release are appreciated by engineers and drivers. Gentle on discs and low wear rate are other excellent virtues. 15 is a great compound winner in different GT3/GT4 races or open-wheel categories such as US F3, F3, and Indy Lights. It has better cold bite than 11 or 13. The 15 is one of the most complete PFC compounds. 15 works very well with modern racing ABS. Typical Applications: GT3, GT4 front, Touring cars, Formula 3, F3R, Indy series Z-Rated - High Performance Street - This compound has been developed for fast road/track day applications. It provides more stopping power and increased fade resistance over the std OE materials but retains the good qualities of the road pad i.e., low dusting and noise along with low wear rate. Typical Applications; This compound can be used in OE calipers or aftermarket brake kits in applications where an increase in performance is required over the standard OE friction material. Generally recommended as predominately a street pad. 4521019998231 4521019998231_32901093457943 PFC Racing Brake Pads- PFC ZR29 Caliper 7832.11.14.54 https://hinzmotorsport.com/products/pfc-racing-brake-pads-pfc-zr29-caliper Performance Friction Brakes https://cdn.shopify.com/s/files/1/0045/1179/3186/products/pfc7832_7929.png?v=1601918160 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 2948 g 1 11 335.99 PFC Racing Brake Pads for PFC Z29 BBK Caliper.PFC Brakes are a leader in high-performance braking technology. Manufactured right here in the U.S., PFC has been the go-to choice for many top racing teams around the world. They have worked closely with Porsche on the development of their pad compounds and PFC Brakes are standard fitment on Porsche 991 GT3 Cup cars.Biggest Takeaway?We run PFC brakes on our cars for their consistent performance lap-after-lap and their low-wear rates. These things do not overheat either. While you may pay a little bit more for these pads upfront compared to say a Hawk pad, these will last twice as long if not more in many applications. In addition to decreased wear on the pad itself, these pads are also a lot less harsh on rotors. The savings really start to add up compared to inferior brands. In any braking application, you are generally limited by the grip in your tires, these pads will provide all of the stopping power you need.PFC's can also be used on the street when driving from to and from the track. Like any race pad, they will not have as much bite it the cold, but they will work fine in a pinch. Sometimes they squeak, sometimes they don't, but it generally isn't too bad when they do.For the 7832 Pad they are available in the following 5 compounds (application dependent):08 Compound - Smooth Bite - Endurance Racing - 08 compounds are one of PFC's most popular and have gained immediate favor in Trackday/HPDE, Endurance Sportscar, and GT racing due to its performance in applications where smooth initial bite is a must. 08 have a slight friction rise with temperature, excellent release, and modulation characteristics. Very low abraded disc wear with a fine grey slate like disc finish, similar to 01. Despite its considerable performance, 08 wears the longest of all PFC pads and easily matches wear of the other competitors with much higher bite.11 Compound - Strong Initial Bite - Sprint Racing - is a sprint and medium distance friction providing the ultimate in control, with superior disc conditioning. It is ultra smooth and developed to reduce wheel locking at the end of a stop. Typical Applications; Ideal for use at medium-low grip venues where control and modulation are at a premium. 11's wear is par with PFC's legendary 01 compound showing virtually zero taper wear when raced in a properly designed race caliper.13 Compound - High Bite - Sprint Racing - 13 Compound is a new generation of ultimate high bite - high friction... 13 compounds were developed from 01 compound with increased bite, modulation, with superior disc conditioning and release characteristics for exceptional control. Ultra-smooth and great for tracks with high grip or high downforce cars. This material won its first race on its first outing - it's that good. It is the ultimate combination of high bite and infinite control. Typical applications; Ideal use for sprint and severe applications. Heavy, fast cars or high downforce cars where bite at first 3rd of the stop is desired. 13's wear is par with PFC's legendary 01 compound. Will operate at higher temperatures if called too as .13 has a very high threshold for fade resistance. .13 has shown of all the high bite, high torque pads in the market to have one of the lowest taper wear in a properly designed race caliper.15 Compound - Higher Cold Bite - Sprint/Endurance Racing - The new generation 15 compound is becoming very popular due to its excellent braking characteristics. Very good in all conditions and excellent when running at high temperatures. Its easy control and release are appreciated by engineers and drivers. Gentle on discs and low wear rate are other excellent virtues. 15 is a great compound winner in different GT3/GT4 races or open-wheel categories such as US F3, F3, and Indy Lights. It has better cold bite than 11 or 13. The 15 is one of the most complete PFC compounds. 15 works very well with modern racing ABS. Typical Applications: GT3, GT4 front, Touring cars, Formula 3, F3R, Indy series Z-Rated - High Performance Street - This compound has been developed for fast road/track day applications. It provides more stopping power and increased fade resistance over the std OE materials but retains the good qualities of the road pad i.e., low dusting and noise along with low wear rate. Typical Applications; This compound can be used in OE calipers or aftermarket brake kits in applications where an increase in performance is required over the standard OE friction material. Generally recommended as predominately a street pad. 4521019998231 4521019998231_32901093949463 PFC Racing Brake Pads- PFC ZR29 Caliper 7832.15.14.54 https://hinzmotorsport.com/products/pfc-racing-brake-pads-pfc-zr29-caliper Performance Friction Brakes https://cdn.shopify.com/s/files/1/0045/1179/3186/products/pfc7832_7929.png?v=1601918160 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 2948 g 1 15 335.99 PFC Racing Brake Pads for PFC Z29 BBK Caliper.PFC Brakes are a leader in high-performance braking technology. Manufactured right here in the U.S., PFC has been the go-to choice for many top racing teams around the world. They have worked closely with Porsche on the development of their pad compounds and PFC Brakes are standard fitment on Porsche 991 GT3 Cup cars.Biggest Takeaway?We run PFC brakes on our cars for their consistent performance lap-after-lap and their low-wear rates. These things do not overheat either. While you may pay a little bit more for these pads upfront compared to say a Hawk pad, these will last twice as long if not more in many applications. In addition to decreased wear on the pad itself, these pads are also a lot less harsh on rotors. The savings really start to add up compared to inferior brands. In any braking application, you are generally limited by the grip in your tires, these pads will provide all of the stopping power you need.PFC's can also be used on the street when driving from to and from the track. Like any race pad, they will not have as much bite it the cold, but they will work fine in a pinch. Sometimes they squeak, sometimes they don't, but it generally isn't too bad when they do.For the 7832 Pad they are available in the following 5 compounds (application dependent):08 Compound - Smooth Bite - Endurance Racing - 08 compounds are one of PFC's most popular and have gained immediate favor in Trackday/HPDE, Endurance Sportscar, and GT racing due to its performance in applications where smooth initial bite is a must. 08 have a slight friction rise with temperature, excellent release, and modulation characteristics. Very low abraded disc wear with a fine grey slate like disc finish, similar to 01. Despite its considerable performance, 08 wears the longest of all PFC pads and easily matches wear of the other competitors with much higher bite.11 Compound - Strong Initial Bite - Sprint Racing - is a sprint and medium distance friction providing the ultimate in control, with superior disc conditioning. It is ultra smooth and developed to reduce wheel locking at the end of a stop. Typical Applications; Ideal for use at medium-low grip venues where control and modulation are at a premium. 11's wear is par with PFC's legendary 01 compound showing virtually zero taper wear when raced in a properly designed race caliper.13 Compound - High Bite - Sprint Racing - 13 Compound is a new generation of ultimate high bite - high friction... 13 compounds were developed from 01 compound with increased bite, modulation, with superior disc conditioning and release characteristics for exceptional control. Ultra-smooth and great for tracks with high grip or high downforce cars. This material won its first race on its first outing - it's that good. It is the ultimate combination of high bite and infinite control. Typical applications; Ideal use for sprint and severe applications. Heavy, fast cars or high downforce cars where bite at first 3rd of the stop is desired. 13's wear is par with PFC's legendary 01 compound. Will operate at higher temperatures if called too as .13 has a very high threshold for fade resistance. .13 has shown of all the high bite, high torque pads in the market to have one of the lowest taper wear in a properly designed race caliper.15 Compound - Higher Cold Bite - Sprint/Endurance Racing - The new generation 15 compound is becoming very popular due to its excellent braking characteristics. Very good in all conditions and excellent when running at high temperatures. Its easy control and release are appreciated by engineers and drivers. Gentle on discs and low wear rate are other excellent virtues. 15 is a great compound winner in different GT3/GT4 races or open-wheel categories such as US F3, F3, and Indy Lights. It has better cold bite than 11 or 13. The 15 is one of the most complete PFC compounds. 15 works very well with modern racing ABS. Typical Applications: GT3, GT4 front, Touring cars, Formula 3, F3R, Indy series Z-Rated - High Performance Street - This compound has been developed for fast road/track day applications. It provides more stopping power and increased fade resistance over the std OE materials but retains the good qualities of the road pad i.e., low dusting and noise along with low wear rate. Typical Applications; This compound can be used in OE calipers or aftermarket brake kits in applications where an increase in performance is required over the standard OE friction material. Generally recommended as predominately a street pad. 4521019998231 4521019998231_32901096767511 PFC Racing Brake Pads- PFC ZR29 Caliper 7832.ZR.14.54 https://hinzmotorsport.com/products/pfc-racing-brake-pads-pfc-zr29-caliper Performance Friction Brakes https://cdn.shopify.com/s/files/1/0045/1179/3186/products/pfc7832_7929.png?v=1601918160 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 2948 g 1 Z-Rated 200.00 PFC Racing Brake Pads for PFC Z29 BBK Caliper.PFC Brakes are a leader in high-performance braking technology. Manufactured right here in the U.S., PFC has been the go-to choice for many top racing teams around the world. They have worked closely with Porsche on the development of their pad compounds and PFC Brakes are standard fitment on Porsche 991 GT3 Cup cars.Biggest Takeaway?We run PFC brakes on our cars for their consistent performance lap-after-lap and their low-wear rates. These things do not overheat either. While you may pay a little bit more for these pads upfront compared to say a Hawk pad, these will last twice as long if not more in many applications. In addition to decreased wear on the pad itself, these pads are also a lot less harsh on rotors. The savings really start to add up compared to inferior brands. In any braking application, you are generally limited by the grip in your tires, these pads will provide all of the stopping power you need.PFC's can also be used on the street when driving from to and from the track. Like any race pad, they will not have as much bite it the cold, but they will work fine in a pinch. Sometimes they squeak, sometimes they don't, but it generally isn't too bad when they do.For the 7832 Pad they are available in the following 5 compounds (application dependent):08 Compound - Smooth Bite - Endurance Racing - 08 compounds are one of PFC's most popular and have gained immediate favor in Trackday/HPDE, Endurance Sportscar, and GT racing due to its performance in applications where smooth initial bite is a must. 08 have a slight friction rise with temperature, excellent release, and modulation characteristics. Very low abraded disc wear with a fine grey slate like disc finish, similar to 01. Despite its considerable performance, 08 wears the longest of all PFC pads and easily matches wear of the other competitors with much higher bite.11 Compound - Strong Initial Bite - Sprint Racing - is a sprint and medium distance friction providing the ultimate in control, with superior disc conditioning. It is ultra smooth and developed to reduce wheel locking at the end of a stop. Typical Applications; Ideal for use at medium-low grip venues where control and modulation are at a premium. 11's wear is par with PFC's legendary 01 compound showing virtually zero taper wear when raced in a properly designed race caliper.13 Compound - High Bite - Sprint Racing - 13 Compound is a new generation of ultimate high bite - high friction... 13 compounds were developed from 01 compound with increased bite, modulation, with superior disc conditioning and release characteristics for exceptional control. Ultra-smooth and great for tracks with high grip or high downforce cars. This material won its first race on its first outing - it's that good. It is the ultimate combination of high bite and infinite control. Typical applications; Ideal use for sprint and severe applications. Heavy, fast cars or high downforce cars where bite at first 3rd of the stop is desired. 13's wear is par with PFC's legendary 01 compound. Will operate at higher temperatures if called too as .13 has a very high threshold for fade resistance. .13 has shown of all the high bite, high torque pads in the market to have one of the lowest taper wear in a properly designed race caliper.15 Compound - Higher Cold Bite - Sprint/Endurance Racing - The new generation 15 compound is becoming very popular due to its excellent braking characteristics. Very good in all conditions and excellent when running at high temperatures. Its easy control and release are appreciated by engineers and drivers. Gentle on discs and low wear rate are other excellent virtues. 15 is a great compound winner in different GT3/GT4 races or open-wheel categories such as US F3, F3, and Indy Lights. It has better cold bite than 11 or 13. The 15 is one of the most complete PFC compounds. 15 works very well with modern racing ABS. Typical Applications: GT3, GT4 front, Touring cars, Formula 3, F3R, Indy series Z-Rated - High Performance Street - This compound has been developed for fast road/track day applications. It provides more stopping power and increased fade resistance over the std OE materials but retains the good qualities of the road pad i.e., low dusting and noise along with low wear rate. Typical Applications; This compound can be used in OE calipers or aftermarket brake kits in applications where an increase in performance is required over the standard OE friction material. Generally recommended as predominately a street pad. 4534301523991 4534301523991_31751568457751 18x11" ET44 APEX EC-7 Wheel (Deep) EC71811ET44AN https://hinzmotorsport.com/products/18x11-et44-apex-ec-7-wheel-deep Apex Race Parts https://cdn.shopify.com/s/files/1/0045/1179/3186/products/18-EC7-SMBK-Profile3_bcbe90ae-3378-4cac-847e-3754880fca67.jpg?v=1599658905 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/18-EC7-AN-Profile3_38d425e3-318f-41ec-be77-303ac6c32ebd.jpg?v=1599658905 true 10569 g 0 Anthracite 379.00 Wheel SpecificationsWheel Construction: Flow Formed Model: EC-7 Size: 18x11" ET44 Offset (mm): 44 Face Profile: Profile 3; Deep Concavity Weight (lbs): 23.3 Bolt Pattern: 5x120mm Center Bore: 72.56 Load Rating: 1,550 lbsIf you're in the market for wheels for your street, track, or race car look no further than Apex Wheels. Apex Wheels have been around for quite some time now and offer the perfect balance between strength, weight, and cost. These wheels are proven many times over on racetracks across the country and around the world. With countless sizes, offsets, models, and colors available you are sure to find something for your car that meets your fitment and style. We have been running Apex Wheels on our heavy Hinz Motorsport M3 test vehicle for several years now without any issues despite countless excursions over potholes and race track curbing. These wheels are lighter than stock and certainly look the business.In addition to all of the aforementioned attributes, APEX Wheels offer superb brake caliper clearances for those running big brake kits. In addition to FEA performed on each wheel design, extensive 3rd party testing is also conducted on every wheel shape and size to ensure that the wheels exceed all safety standards. Simply put, these wheels are certifiably strong and will withstand abuse so that you can buy with confidence.These are all just a few reasons why APEX Wheels are quickly becoming the go-to choice for car enthusiasts around the globe.Please chat with us or give us a call before placing an order if you're unsure of fitment. 414-212-5679 4534301523991 4534301523991_31751568490519 18x11" ET44 APEX EC-7 Wheel (Deep) EC71811ET44RS https://hinzmotorsport.com/products/18x11-et44-apex-ec-7-wheel-deep Apex Race Parts https://cdn.shopify.com/s/files/1/0045/1179/3186/products/18-EC7-SMBK-Profile3_bcbe90ae-3378-4cac-847e-3754880fca67.jpg?v=1599658905 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/18-EC7-HS-Profile3_ac653773-2531-493f-8adb-a9efcfa00fbd.jpg?v=1599658905 true 10569 g 0 Race Silver 379.00 Wheel SpecificationsWheel Construction: Flow Formed Model: EC-7 Size: 18x11" ET44 Offset (mm): 44 Face Profile: Profile 3; Deep Concavity Weight (lbs): 23.3 Bolt Pattern: 5x120mm Center Bore: 72.56 Load Rating: 1,550 lbsIf you're in the market for wheels for your street, track, or race car look no further than Apex Wheels. Apex Wheels have been around for quite some time now and offer the perfect balance between strength, weight, and cost. These wheels are proven many times over on racetracks across the country and around the world. With countless sizes, offsets, models, and colors available you are sure to find something for your car that meets your fitment and style. We have been running Apex Wheels on our heavy Hinz Motorsport M3 test vehicle for several years now without any issues despite countless excursions over potholes and race track curbing. These wheels are lighter than stock and certainly look the business.In addition to all of the aforementioned attributes, APEX Wheels offer superb brake caliper clearances for those running big brake kits. In addition to FEA performed on each wheel design, extensive 3rd party testing is also conducted on every wheel shape and size to ensure that the wheels exceed all safety standards. Simply put, these wheels are certifiably strong and will withstand abuse so that you can buy with confidence.These are all just a few reasons why APEX Wheels are quickly becoming the go-to choice for car enthusiasts around the globe.Please chat with us or give us a call before placing an order if you're unsure of fitment. 414-212-5679 4534301523991 4534301523991_31751568523287 18x11" ET44 APEX EC-7 Wheel (Deep) EC71811ET44SMBK https://hinzmotorsport.com/products/18x11-et44-apex-ec-7-wheel-deep Apex Race Parts https://cdn.shopify.com/s/files/1/0045/1179/3186/products/18-EC7-SMBK-Profile3_bcbe90ae-3378-4cac-847e-3754880fca67.jpg?v=1599658905 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/18-EC7-SMBK-Profile3_bcbe90ae-3378-4cac-847e-3754880fca67.jpg?v=1599658905 true 10569 g 0 Satin Black 379.00 Wheel SpecificationsWheel Construction: Flow Formed Model: EC-7 Size: 18x11" ET44 Offset (mm): 44 Face Profile: Profile 3; Deep Concavity Weight (lbs): 23.3 Bolt Pattern: 5x120mm Center Bore: 72.56 Load Rating: 1,550 lbsIf you're in the market for wheels for your street, track, or race car look no further than Apex Wheels. Apex Wheels have been around for quite some time now and offer the perfect balance between strength, weight, and cost. These wheels are proven many times over on racetracks across the country and around the world. With countless sizes, offsets, models, and colors available you are sure to find something for your car that meets your fitment and style. We have been running Apex Wheels on our heavy Hinz Motorsport M3 test vehicle for several years now without any issues despite countless excursions over potholes and race track curbing. These wheels are lighter than stock and certainly look the business.In addition to all of the aforementioned attributes, APEX Wheels offer superb brake caliper clearances for those running big brake kits. In addition to FEA performed on each wheel design, extensive 3rd party testing is also conducted on every wheel shape and size to ensure that the wheels exceed all safety standards. Simply put, these wheels are certifiably strong and will withstand abuse so that you can buy with confidence.These are all just a few reasons why APEX Wheels are quickly becoming the go-to choice for car enthusiasts around the globe.Please chat with us or give us a call before placing an order if you're unsure of fitment. 414-212-5679 4811705352215 4811705352215_32906449584151 Garmin Catalyst - Driving Performance Optimizer 010-02345-00 https://hinzmotorsport.com/products/garmin-catalyst-driving-performance-optimizer Garmin https://cdn.shopify.com/s/files/1/0045/1179/3186/products/GarminCatalystResized6.jpg?v=1602188842 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 1814 g 2 Default Title 999.99 Garmin Catalyst - Lap Timer/Driving CoachThe Garmin Catalyst is an industry-first racing coach and driving performance optimizer that's changing the world of Motorsports. It mounts in the cockpit to gather your performance data and provide real-time audible coaching. Immediate session analysis helps drivers of all levels achieve their full track driving potential on road courses. Groundbreaking True-Track Positioningu2122 technology uses built-in accelerometers, 10 Hz multi-GNSS positioning, and video image processing to automatically generate your car's racing line on the track. Plus, their revolutionary True Optimal Lapu2122 technology shows your best achievable time, based on lines you actually drove and can repeat. While on the track, hear real-time coaching cues through a compatible headset2 or car stereo. After your session, use the 7" wide touchscreen display to immediately review your performance data and see your major areas for improvement.Digging DeeperThis is a standalone unit, no laptop is required for data analysis or anything. Everything is done on the device and it is easy to simply mount and drive.Linked via Bluetooth or cable connected to a 3.5mm headphone jack, the system will provide audible basic and advanced session goals. It uses its forward-facing camera and combines with GPS information to understand your actual lateral position on track, which makes it unique. This ability allows it to be able to see and then suggest what the best line is. Track maps are not pre-installed on the device, only the start-finish lines are. Everything in terms of track recreation/line through corners etc. is created dynamically on the device. It takes about 3 laps your first session for it to learn the track, then you will begin getting lap times and feedback.The system takes into account your best lines through every corner and sector, sewing together your perfect lap based on previous laps you've driven. Additionally, it can promote lap consistency, which equates to faster laps times as you begin to fine-tune each corner or sector.It gathers several data metrics and identifies where laps can be seamlessly joined together to create the fastest racing line. This shows users their fastest possible time based on lines actually driven and gives them an optimal lap they can truly achieve. This differs from "theoretically best" times you see on many other devices as it accounts for all sectors and segments. For example, if you go too fast through one corner and sacrifice the next, that would not yield the fastest lap as some theoretical times would otherwise suggest.Another key feature worth mentioning is the system can prioritize up to 3 opportunities, or areas on the track that are most valuable to focus on, and provides comparative data to show you what you may have done better and what you could have done better on your quickest lap.What's in the BoxGarmin Catalystu212232 GB microSD pre-installed under a covered compartment (auxiliary card slot on the side of the Catalyst device is externally accessible for memory expansion)Remote Cam with polarized lens coverRemote Cam 3.5 meter cableHeavy-duty vehicle suction cupPowered magnetic mountTwo 1"connecting arms1" arm connectorCable clipsVehicle power cableDocumentationIncluded Optional Accessories1" ball adapter screw-down mountUSB data cable12V bare wire vehicle power cableAdditional Remote Cam adhesiveSpecificationsPhysical Dimensions7.84" W x 4.79" H x 0.93" D (19.9 x 12.2 x 2.4 cm)GPSYesDisplay Size6.0" W x 3.5" H (15.2 x 8.9 cm); 6.95" (17.7 cm)Water RatingNoDisplay Resolution1024 x 600 pixelsWeight15.4 oz (437 g)Display Type6.95" super wide view IPS, color TFT, with on-cell capacitive touch panelBattery Typerechargeable lithium-ionBattery Lifeup to 2 hours 4423455047703 4423455047703_31756680331287 AiM Solo 2 / Solo 2 DL Mount Kits X46KSVS00 https://hinzmotorsport.com/products/aim-solo2-dl-mount-kits AiM Technologies https://cdn.shopify.com/s/files/1/0045/1179/3186/products/AiMSolo2bracketkitX46KSVS00.jpg?v=1599848416 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/AiMSolo2bracketkitX46KSVS00.jpg?v=1599848509 true 295 g 1 Suction Cup Kit 40.00 Suction Cup Mount KitIn the box: suction cup, 90 mm arm, clamp base with ball, locknut, washers, and screwsThe AiM Solo / Solo 2 Suction Cup Mount is used to easily and securely attach your lap timer to your window or windshield. These mounts are very rigid and hold up to high G-forces on track. This is great for swapping between cars at the track or if you don't want a permanent install on your street car that also sees track time. All it takes is either a push or pull of the lever to secure or release the mount. Roll-Bar Mount KitIn the box: Handlebar bracket, 90mm arm, clamp base with ball, locknut, washers, and screwsU-Bolt Mount Kit In the box: U-bolt, 90 mm arm, clamp base with ball, locknut, washers, and screws 4423455047703 4423455047703_31756680364055 AiM Solo 2 / Solo 2 DL Mount Kits X46KSTG00 https://hinzmotorsport.com/products/aim-solo2-dl-mount-kits AiM Technologies https://cdn.shopify.com/s/files/1/0045/1179/3186/products/AiMSolo2bracketkitX46KSVS00.jpg?v=1599848416 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/AiMSolo2bracketkitX46KSTG00.jpg?v=1599848506 false 295 g 0 Roll-Bar Kit 36.00 Suction Cup Mount KitIn the box: suction cup, 90 mm arm, clamp base with ball, locknut, washers, and screwsThe AiM Solo / Solo 2 Suction Cup Mount is used to easily and securely attach your lap timer to your window or windshield. These mounts are very rigid and hold up to high G-forces on track. This is great for swapping between cars at the track or if you don't want a permanent install on your street car that also sees track time. All it takes is either a push or pull of the lever to secure or release the mount. Roll-Bar Mount KitIn the box: Handlebar bracket, 90mm arm, clamp base with ball, locknut, washers, and screwsU-Bolt Mount Kit In the box: U-bolt, 90 mm arm, clamp base with ball, locknut, washers, and screws 4423455047703 4423455047703_31756680396823 AiM Solo 2 / Solo 2 DL Mount Kits X46KSTP00 https://hinzmotorsport.com/products/aim-solo2-dl-mount-kits AiM Technologies https://cdn.shopify.com/s/files/1/0045/1179/3186/products/AiMSolo2bracketkitX46KSVS00.jpg?v=1599848416 https://cdn.shopify.com/s/files/1/0045/1179/3186/products/AiMSolo2bracketkitX46KSTP00.jpg?v=1599848509 false 295 g 0 U-Bolt Kit 36.00 Suction Cup Mount KitIn the box: suction cup, 90 mm arm, clamp base with ball, locknut, washers, and screwsThe AiM Solo / Solo 2 Suction Cup Mount is used to easily and securely attach your lap timer to your window or windshield. These mounts are very rigid and hold up to high G-forces on track. This is great for swapping between cars at the track or if you don't want a permanent install on your street car that also sees track time. All it takes is either a push or pull of the lever to secure or release the mount. Roll-Bar Mount KitIn the box: Handlebar bracket, 90mm arm, clamp base with ball, locknut, washers, and screwsU-Bolt Mount Kit In the box: U-bolt, 90 mm arm, clamp base with ball, locknut, washers, and screws 1755332313122 1755332313122_33013100445719 PFC 08 Rear Racing Brake Pads - E46 M3 0548.08.16.44 https://hinzmotorsport.com/products/pfc-08-rear-racing-brake-pads-e46-m3 Performance Friction Brakes https://cdn.shopify.com/s/files/1/0045/1179/3186/products/PF548.jpg?v=1569327773 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 1270 g 1 8 279.95 265.99 PFC 08 Racing Pads for E46 M3 (Stock Rear Caliper)Part #: 548.08.16.44PFC Brakes are a leader in high-performance braking technology. Manufactured right here in the U.S., PFC has been the go-to choice for many top racing teams around the world. They have worked closely with BMW & Porsche on the development of their pad compounds and PFC Brakes are even standard fitment on Porsche 991 GT3 Cup cars.Biggest Takeaway?We run PFC brakes on our cars for their consistent performance lap-after-lap and their low-wear rates. These things do not overheat either. While you may pay a little bit more for these pads upfront compared to say a Hawk pad, these will last twice as long if not more in many applications. In addition to decreased wear on the pad itself, these pads are also a lot less harsh on rotors. The savings really start to add up compared to inferior brands. In any braking application, you are generally limited by the grip in your tires, these pads will provide all of the stopping power you need.PFC's can also be used on the street when driving from to and from the track. Like any race pad, they will not have as much bite it the cold, but they will work fine in a pinch. Sometimes they squeak, sometimes they don't, but it generally isn't too bad when they do.For the 0548 Pad they are available in the following 2 compounds (application dependent):11 Compound - Strong Initial Bite - Sprint Racing - is a sprint and medium distance friction providing the ultimate in control, with superior disc conditioning. It is ultra smooth and developed to reduce wheel locking at the end of a stop. Typical Applications; Ideal for use at medium-low grip venues where control and modulation are at a premium. 11's wear is par with PFC's legendary 01 compound showing virtually zero taper wear when raced in a properly designed race caliper.08 Compound - Smooth Bite - Endurance Racing - 08 compounds are one of PFC's most popular and have gained immediate favor in Trackday/HPDE, Endurance Sportscar, and GT racing due to its performance in applications where smooth initial bite is a must. 08 have a slight friction rise with temperature, excellent release, and modulation characteristics. Very low abraded disc wear with a fine grey slate like disc finish, similar to 01. Despite its considerable performance, 08 wears the longest of all PFC pads and easily matches wear of the other competitors with much higher bite.All Fitments (Stock Rear Calipers):3 SeriesE46 (99-05) > 330CiE46 (99-05) > 330iE46 (99-05) > 330xiE46 (99-05) > M33 SeriesE90 / E91 / E92 / E93 (06-13) > 330iE90 / E91 / E92 / E93 (06-13) > 335iE90 / E91 / E92 / E93 (06-13) > 335isX SeriesE83 X3 (04-10) > X3 2.5iE83 X3 (04-10) > X3 3.0imake-bmw,make-bmw-model-3-series,make-bmw-model-3-series-chassis-e46--99-05-,make-bmw-model-3-series-chassis-e46--99-05--submodel-330i,make-bmw-model-3-series-chassis-e46--99-05--submodel-330xi,make-bmw-model-3-series-chassis-e46--99-05--submodel-m3,make-bmw-model-3-series-chassis-e90-e92-e93--2006-13-,make-bmw-model-3-series-chassis-e90-e92-e93--2006-13--submodel-330i,make-bmw-model-3-series-chassis-e90-e92-e93--2006-13--submodel-335i,make-bmw-model-3-series-chassis-e90-e92-e93--2006-13--submodel-335is,make-bmw-model-x-series,make-bmw-model-x-series-chassis-e83--2004-10-,make-bmw-model-x-series-chassis-e83--2004-10--submodel-x3-2-5i,make-bmw-model-x-series-chassis-e83--2004-10--submodel-x3-3-0i 1755332313122 1755332313122_16719174893602 PFC 08 Rear Racing Brake Pads - E46 M3 0548.11.16.44 https://hinzmotorsport.com/products/pfc-08-rear-racing-brake-pads-e46-m3 Performance Friction Brakes https://cdn.shopify.com/s/files/1/0045/1179/3186/products/PF548.jpg?v=1569327773 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 1315 g 1 11 279.95 265.99 PFC 08 Racing Pads for E46 M3 (Stock Rear Caliper)Part #: 548.08.16.44PFC Brakes are a leader in high-performance braking technology. Manufactured right here in the U.S., PFC has been the go-to choice for many top racing teams around the world. They have worked closely with BMW & Porsche on the development of their pad compounds and PFC Brakes are even standard fitment on Porsche 991 GT3 Cup cars.Biggest Takeaway?We run PFC brakes on our cars for their consistent performance lap-after-lap and their low-wear rates. These things do not overheat either. While you may pay a little bit more for these pads upfront compared to say a Hawk pad, these will last twice as long if not more in many applications. In addition to decreased wear on the pad itself, these pads are also a lot less harsh on rotors. The savings really start to add up compared to inferior brands. In any braking application, you are generally limited by the grip in your tires, these pads will provide all of the stopping power you need.PFC's can also be used on the street when driving from to and from the track. Like any race pad, they will not have as much bite it the cold, but they will work fine in a pinch. Sometimes they squeak, sometimes they don't, but it generally isn't too bad when they do.For the 0548 Pad they are available in the following 2 compounds (application dependent):11 Compound - Strong Initial Bite - Sprint Racing - is a sprint and medium distance friction providing the ultimate in control, with superior disc conditioning. It is ultra smooth and developed to reduce wheel locking at the end of a stop. Typical Applications; Ideal for use at medium-low grip venues where control and modulation are at a premium. 11's wear is par with PFC's legendary 01 compound showing virtually zero taper wear when raced in a properly designed race caliper.08 Compound - Smooth Bite - Endurance Racing - 08 compounds are one of PFC's most popular and have gained immediate favor in Trackday/HPDE, Endurance Sportscar, and GT racing due to its performance in applications where smooth initial bite is a must. 08 have a slight friction rise with temperature, excellent release, and modulation characteristics. Very low abraded disc wear with a fine grey slate like disc finish, similar to 01. Despite its considerable performance, 08 wears the longest of all PFC pads and easily matches wear of the other competitors with much higher bite.All Fitments (Stock Rear Calipers):3 SeriesE46 (99-05) > 330CiE46 (99-05) > 330iE46 (99-05) > 330xiE46 (99-05) > M33 SeriesE90 / E91 / E92 / E93 (06-13) > 330iE90 / E91 / E92 / E93 (06-13) > 335iE90 / E91 / E92 / E93 (06-13) > 335isX SeriesE83 X3 (04-10) > X3 2.5iE83 X3 (04-10) > X3 3.0imake-bmw,make-bmw-model-3-series,make-bmw-model-3-series-chassis-e46--99-05-,make-bmw-model-3-series-chassis-e46--99-05--submodel-330i,make-bmw-model-3-series-chassis-e46--99-05--submodel-330xi,make-bmw-model-3-series-chassis-e46--99-05--submodel-m3,make-bmw-model-3-series-chassis-e90-e92-e93--2006-13-,make-bmw-model-3-series-chassis-e90-e92-e93--2006-13--submodel-330i,make-bmw-model-3-series-chassis-e90-e92-e93--2006-13--submodel-335i,make-bmw-model-3-series-chassis-e90-e92-e93--2006-13--submodel-335is,make-bmw-model-x-series,make-bmw-model-x-series-chassis-e83--2004-10-,make-bmw-model-x-series-chassis-e83--2004-10--submodel-x3-2-5i,make-bmw-model-x-series-chassis-e83--2004-10--submodel-x3-3-0i 4854148530199 4854148530199_33019293925399 Öhlins Road & Track Coilover Kit for BMW E8X/E9X 1/3 Series BMU MI01 https://hinzmotorsport.com/products/ohlins-road-track-coilover-kit-for-bmw-e8x-e9x-1-3-series Ohlins https://cdn.shopify.com/s/files/1/0045/1179/3186/products/OhlinsBMSMI016.jpg?v=1610730447 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 23451 g 2 Default Title 2,490.00 u00d6hlins Road & Track Coiloversu00a0If you are looking for the highest quality true dual-purpose coilover for both street and track use, look no further than theu00a0u00d6hlinsu00a0Road & Track coilover.The u00d6hlins Road & Track Coilover suspension system has beenu00a0designed for those who are looking for ultimate handling performance without sacrificing daily comfort. Until now, there were compromises when seeking a proper dual-purpose coilover suitable for both street and track duty. The Road & Track coilover has eliminated those compromises with easy adjustability and proper damping and spring selection.When you arrive at the track, just turn the golden knob clockwise to change the stiffness of the shock to the race setting. Adjusting the shock to race mode changes all four areas of the damper; low and high-speed compression and rebound damping.The u00d6hlinsu00a0Road & Track team has extensively tested a wide variety of springs to find the perfect setup for an uncompromised dual-purpose coilover. With that, we recommend the listed spring rate that comes with these dampers (70 N/mm Front, 120 N/mm Rear).They are made out of light-weight aluminum and exceed ISO 9227 standards for corrosion and have a 2-year limited warranty.*All fitments are shown below*General FeaturesDFV technology (Dual Flow Valve)Height adjustableRebuildableCorrosion salt spray tested (ISO 9227)2-year limited warrantyFront:Compression and rebound damping with one adjusterSpring preload adjusterApprox.u00a015u00a0mm lower than standard with recommended setupSpring rate 70 N/mmDustcoversUse with original top mountsRear:Compression and rebound damping with one adjusterSpring preload adjusterApprox.u00a010 mm lower than standard with recommended setupSpring rate 120 N/mmDustcoversUse with original top mountsu00d6hlinsu00a0BMW E8X/E9X Fitment:u00a0BMU MI01BMW E9X 3-Series (2006-13')BMW E8Xu00a01-Series (2008-13')make-bmw,make-bmw-model-1-series,make-bmw-model-1-series-chassis-e82--2008-13-,make-bmw-model-1-series-chassis-e82--2008-13--submodel-128i,make-bmw-model-1-series-chassis-e82--2008-13--submodel-135i 4854144073751 4854144073751_33019283472407 Öhlins TTX-PRO Coilover System for BMW F8X M3/M4 BMR GR00 https://hinzmotorsport.com/products/ohlins-ttx-pro-coilover-system-for-bmw-f8x-m3-m4 Ohlins https://cdn.shopify.com/s/files/1/0045/1179/3186/products/ohlinsttxpro997cup4_5bfcae90-391b-4390-897a-ef40a443bff7.jpg?v=1610729524 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 24494 g 0 No Thanks 11,490.00 u00d6hlinsu00a0TTX PRO Coiloversu00a0The u00d6hlins TTX-Pro range of suspension systems have been developed for discerning club level racers and track day aficionados looking to utilize identical technology as the pros use to maximize performance.u00a0u00d6hlins TTX dampers are pressure balanced at every clicker setting without the need for excessive nitrogen pressure, resulting in a broad range of adjustability without cavitation.u00a0The u00d6hlins TTX Motorsport Kits feature the famous TTX (Twin-Tube) technology. This particular kit has been custom made for the BMW F8X M3/M4. It offers a unique combination of a 46mm, two-way adjusted, through-rod, and lightweight McPherson strut for the front and a 36mm rear-mounted TTX shock that will completely transform your car.The u00d6hlins TTX 46 and TTX 36 shock absorbers are developed fromu00a0u00d6hlins participation in GT and Touring car racing. That givesu00a0u00d6hlins Clubsports kits a massive advantage. They are solely focused on providing the car with the best possible condition to set fast lap times without losing control. A fast vehicle also needs to give the driver a sense of safety, confidence, and performance and the TTX system does exactly that.On the race track, this all translates to faster lap times. The two-way adjustability of the shocks allows you to fine-tune the handling at each track you visit or the tires you run.The u00d6hlinsu00a0team has extensively tested a wide variety ofu00a0settings to find the perfect setup for an uncompromised coilover. With that, we recommend the listed spring rate that comes with these dampers (140 N/mm Front, 220 N/mm Rear).They are made out of light-weight aluminum and exceed ISO 9227 standards for corrosion and have a 2-year limited warranty.*Factory lift system must be disabled on equipped vehicles*Highlighted FeaturesTTX TechnologyDyno Matched for consistent handlingHeight adjustableu00a0RebuildableCorrosion salt spray tested (ISO 9227)2-year limited warrantyFront:Adjustable Camber PlatesAnti-roll bar linksTwo-way adjustableu00a0 (independent compression and rebound adjustment)Spring preload adjusterApprox. 20 mm lower than standard with recommended setupSpring rate 140 N/mmu00a0Rear:Two-way adjustableu00a0(independent compression and rebound adjustment)Anti-roll bar linksSpring preload adjusterApprox. 20 mm lower than standard with recommended setupSpring rate 220 N/mmRear Spherical Top MountsTheu00a0u00d6hlins EDC Cancellation Kitu00a0(35020-02)u00a0for Road and Track deactivates dash lights and error codes when electronically adjustable OEM suspension is replaced with a mechanical system. The cancellation kit is plugged into the original suspension controls. No further programming is needed.u00a0*Only needed for vehicles equipped EDC*Fitment:u00a0BMR GR00BMW F80 M3 (2015-20')BMW F82 M4 (2015-20')make-bmw,make-bmw-model-3-series,make-bmw-model-3-series-chassis-f80--2015--,make-bmw-model-3-series-chassis-f80--2015---submodel-m3,make-bmw-model-4-series,make-bmw-model-4-series-chassis-f82-f83--2015--,make-bmw-model-4-series-chassis-f82-f83--2015---submodel-m4 4854144073751 4854144073751_33019283505175 Öhlins TTX-PRO Coilover System for BMW F8X M3/M4 BMR GR00 + 35020-02 https://hinzmotorsport.com/products/ohlins-ttx-pro-coilover-system-for-bmw-f8x-m3-m4 Ohlins https://cdn.shopify.com/s/files/1/0045/1179/3186/products/ohlinsttxpro997cup4_5bfcae90-391b-4390-897a-ef40a443bff7.jpg?v=1610729524 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 25673 g 0 Yes - (35020-02) 12,000.00 u00d6hlinsu00a0TTX PRO Coiloversu00a0The u00d6hlins TTX-Pro range of suspension systems have been developed for discerning club level racers and track day aficionados looking to utilize identical technology as the pros use to maximize performance.u00a0u00d6hlins TTX dampers are pressure balanced at every clicker setting without the need for excessive nitrogen pressure, resulting in a broad range of adjustability without cavitation.u00a0The u00d6hlins TTX Motorsport Kits feature the famous TTX (Twin-Tube) technology. This particular kit has been custom made for the BMW F8X M3/M4. It offers a unique combination of a 46mm, two-way adjusted, through-rod, and lightweight McPherson strut for the front and a 36mm rear-mounted TTX shock that will completely transform your car.The u00d6hlins TTX 46 and TTX 36 shock absorbers are developed fromu00a0u00d6hlins participation in GT and Touring car racing. That givesu00a0u00d6hlins Clubsports kits a massive advantage. They are solely focused on providing the car with the best possible condition to set fast lap times without losing control. A fast vehicle also needs to give the driver a sense of safety, confidence, and performance and the TTX system does exactly that.On the race track, this all translates to faster lap times. The two-way adjustability of the shocks allows you to fine-tune the handling at each track you visit or the tires you run.The u00d6hlinsu00a0team has extensively tested a wide variety ofu00a0settings to find the perfect setup for an uncompromised coilover. With that, we recommend the listed spring rate that comes with these dampers (140 N/mm Front, 220 N/mm Rear).They are made out of light-weight aluminum and exceed ISO 9227 standards for corrosion and have a 2-year limited warranty.*Factory lift system must be disabled on equipped vehicles*Highlighted FeaturesTTX TechnologyDyno Matched for consistent handlingHeight adjustableu00a0RebuildableCorrosion salt spray tested (ISO 9227)2-year limited warrantyFront:Adjustable Camber PlatesAnti-roll bar linksTwo-way adjustableu00a0 (independent compression and rebound adjustment)Spring preload adjusterApprox. 20 mm lower than standard with recommended setupSpring rate 140 N/mmu00a0Rear:Two-way adjustableu00a0(independent compression and rebound adjustment)Anti-roll bar linksSpring preload adjusterApprox. 20 mm lower than standard with recommended setupSpring rate 220 N/mmRear Spherical Top MountsTheu00a0u00d6hlins EDC Cancellation Kitu00a0(35020-02)u00a0for Road and Track deactivates dash lights and error codes when electronically adjustable OEM suspension is replaced with a mechanical system. The cancellation kit is plugged into the original suspension controls. No further programming is needed.u00a0*Only needed for vehicles equipped EDC*Fitment:u00a0BMR GR00BMW F80 M3 (2015-20')BMW F82 M4 (2015-20')make-bmw,make-bmw-model-3-series,make-bmw-model-3-series-chassis-f80--2015--,make-bmw-model-3-series-chassis-f80--2015---submodel-m3,make-bmw-model-4-series,make-bmw-model-4-series-chassis-f82-f83--2015--,make-bmw-model-4-series-chassis-f82-f83--2015---submodel-m4 4854142500887 4854142500887_33019278163991 Öhlins Road & Track Coilover Kit for BMW E89 Z4 BMS MP50 https://hinzmotorsport.com/products/ohlins-road-track-coilover-kit-for-bmw-e89-z4 Ohlins https://cdn.shopify.com/s/files/1/0045/1179/3186/products/ohlinsBMUMI351_0e9f4bd9-e208-4c1a-b95d-13776f3c61c9.jpg?v=1610728322 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 22181 g 1 No 2,590.00 u00d6hlins Road & Track Coiloversu00a0If you are looking for the highest quality true dual-purpose coilover for both street and track use, look no further than theu00a0u00d6hlinsu00a0Road & Track coilover.The u00d6hlins Road & Track Coilover suspension system has beenu00a0designed for those who are looking for ultimate handling performance without sacrificing daily comfort. Until now, there were compromises when seeking a proper dual-purpose coilover suitable for both street and track duty. The Road & Track coilover has eliminated those compromises with easy adjustability and proper damping and spring selection.When you arrive at the track, just turn the golden knob clockwise to change the stiffness of the shock to the race setting. Adjusting the shock to race mode changes all four areas of the damper; low and high-speed compression and rebound damping.The u00d6hlinsu00a0Road & Track team has extensively tested a wide variety of springs to find the perfect setup for an uncompromised dual-purpose coilover. With that, we recommend the listed spring rate that comes with these dampers (60 N/mm Front, 70 N/mm Rear).They are made out of light-weight aluminum and exceed ISO 9227 standards for corrosion and have a 2-year limited warranty.*All fitments are shown below*General FeaturesDFV technology (Dual Flow Valve)Height adjustableRebuildableCorrosion salt spray tested (ISO 9227)2-year limited warrantyFront:Compression and rebound damping with one adjusterSpring preload adjusterApprox.u00a010u00a0mm lower than standard with recommended setupSpring rate 60 N/mmDustcoversUse with original top mountsRear:Compression and rebound damping with one adjusterSpring preload adjusterApprox.u00a010 mm lower than standard with recommended setupSpring rate 70 N/mmDustcoversUse with original top mountsu00d6hlinsu00a0BMW E89 Fitment:u00a0BMS MP50BMW E89 Z4 (2009-16')make-bmw,make-bmw-model-z-series,make-bmw-model-z-series-chassis-e89--2009-17-,make-bmw-model-z-series-chassis-e89--2009-17--submodel-z4 4854142500887 4854142500887_33019278196759 Öhlins Road & Track Coilover Kit for BMW E89 Z4 BMS MP50 + (35020-05) https://hinzmotorsport.com/products/ohlins-road-track-coilover-kit-for-bmw-e89-z4 Ohlins https://cdn.shopify.com/s/files/1/0045/1179/3186/products/ohlinsBMUMI351_0e9f4bd9-e208-4c1a-b95d-13776f3c61c9.jpg?v=1610728322 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 22997 g 1 Yes - (35020-05) 3,100.00 u00d6hlins Road & Track Coiloversu00a0If you are looking for the highest quality true dual-purpose coilover for both street and track use, look no further than theu00a0u00d6hlinsu00a0Road & Track coilover.The u00d6hlins Road & Track Coilover suspension system has beenu00a0designed for those who are looking for ultimate handling performance without sacrificing daily comfort. Until now, there were compromises when seeking a proper dual-purpose coilover suitable for both street and track duty. The Road & Track coilover has eliminated those compromises with easy adjustability and proper damping and spring selection.When you arrive at the track, just turn the golden knob clockwise to change the stiffness of the shock to the race setting. Adjusting the shock to race mode changes all four areas of the damper; low and high-speed compression and rebound damping.The u00d6hlinsu00a0Road & Track team has extensively tested a wide variety of springs to find the perfect setup for an uncompromised dual-purpose coilover. With that, we recommend the listed spring rate that comes with these dampers (60 N/mm Front, 70 N/mm Rear).They are made out of light-weight aluminum and exceed ISO 9227 standards for corrosion and have a 2-year limited warranty.*All fitments are shown below*General FeaturesDFV technology (Dual Flow Valve)Height adjustableRebuildableCorrosion salt spray tested (ISO 9227)2-year limited warrantyFront:Compression and rebound damping with one adjusterSpring preload adjusterApprox.u00a010u00a0mm lower than standard with recommended setupSpring rate 60 N/mmDustcoversUse with original top mountsRear:Compression and rebound damping with one adjusterSpring preload adjusterApprox.u00a010 mm lower than standard with recommended setupSpring rate 70 N/mmDustcoversUse with original top mountsu00d6hlinsu00a0BMW E89 Fitment:u00a0BMS MP50BMW E89 Z4 (2009-16')make-bmw,make-bmw-model-z-series,make-bmw-model-z-series-chassis-e89--2009-17-,make-bmw-model-z-series-chassis-e89--2009-17--submodel-z4 4854140993559 4854140993559_33019274526743 Öhlins Road & Track Coilover Kit for BMW E9X M3 BMS MI40 https://hinzmotorsport.com/products/ohlins-road-track-coilover-kit-for-bmw-e9x-m3 Ohlins https://cdn.shopify.com/s/files/1/0045/1179/3186/products/ohlinsbmsMI401.jpg?v=1610727717 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 36106 g 7 No 2,590.00 u00d6hlins Road & Track Coiloversu00a0If you are looking for the highest quality true dual-purpose coilover for both street and track use, look no further than theu00a0u00d6hlinsu00a0Road & Track coilover.The u00d6hlins Road & Track Coilover suspension system has beenu00a0designed for those who are looking for ultimate handling performance without sacrificing daily comfort. Until now, there were compromises when seeking a proper dual-purpose coilover suitable for both street and track duty. The Road & Track coilover has eliminated those compromises with easy adjustability and proper damping and spring selection.When you arrive at the track, just turn the golden knob clockwise to change the stiffness of the shock to the race setting. Adjusting the shock to race mode changes all four areas of the damper; low and high-speed compression and rebound damping.The u00d6hlinsu00a0Road & Track team has extensively tested a wide variety of springs to find the perfect setup for an uncompromised dual-purpose coilover. With that, we recommend the listed spring rate that comes with these dampers (60 N/mm Front, 120 N/mm Rear).They are made out of light-weight aluminum and exceed ISO 9227 standards for corrosion and have a 2-year limited warranty.*All fitments are shown below*General FeaturesDFV technology (Dual Flow Valve)Height adjustableRebuildableCorrosion salt spray tested (ISO 9227)2-year limited warrantyFront:Compression and rebound damping with one adjusterSpring preload adjusterApprox.u00a015u00a0mm lower than standard with recommended setupSpring rate 60 N/mmDustcoversUse with original top mountsRear:Compression and rebound damping with one adjusterSpring preload adjusterApprox.u00a010 mm lower than standard with recommended setupSpring rate 120 N/mmDustcoversUse with original top mountsu00d6hlinsu00a0BMW E9X Fitment:u00a0BMS MI40BMW E90 M3 (2007-13')BMW E92 M3 (2007-13')make-bmw,make-bmw-model-3-series,make-bmw-model-3-series-chassis-e90-e92-e93--2006-13-,make-bmw-model-3-series-chassis-e90-e92-e93--2006-13--submodel-m3 4854140993559 4854140993559_33019274559511 Öhlins Road & Track Coilover Kit for BMW E9X M3 BMS MI40 + (35020-04) https://hinzmotorsport.com/products/ohlins-road-track-coilover-kit-for-bmw-e9x-m3 Ohlins https://cdn.shopify.com/s/files/1/0045/1179/3186/products/ohlinsbmsMI401.jpg?v=1610727717 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 36287 g 4 Yes - (35020-04) 3,100.00 u00d6hlins Road & Track Coiloversu00a0If you are looking for the highest quality true dual-purpose coilover for both street and track use, look no further than theu00a0u00d6hlinsu00a0Road & Track coilover.The u00d6hlins Road & Track Coilover suspension system has beenu00a0designed for those who are looking for ultimate handling performance without sacrificing daily comfort. Until now, there were compromises when seeking a proper dual-purpose coilover suitable for both street and track duty. The Road & Track coilover has eliminated those compromises with easy adjustability and proper damping and spring selection.When you arrive at the track, just turn the golden knob clockwise to change the stiffness of the shock to the race setting. Adjusting the shock to race mode changes all four areas of the damper; low and high-speed compression and rebound damping.The u00d6hlinsu00a0Road & Track team has extensively tested a wide variety of springs to find the perfect setup for an uncompromised dual-purpose coilover. With that, we recommend the listed spring rate that comes with these dampers (60 N/mm Front, 120 N/mm Rear).They are made out of light-weight aluminum and exceed ISO 9227 standards for corrosion and have a 2-year limited warranty.*All fitments are shown below*General FeaturesDFV technology (Dual Flow Valve)Height adjustableRebuildableCorrosion salt spray tested (ISO 9227)2-year limited warrantyFront:Compression and rebound damping with one adjusterSpring preload adjusterApprox.u00a015u00a0mm lower than standard with recommended setupSpring rate 60 N/mmDustcoversUse with original top mountsRear:Compression and rebound damping with one adjusterSpring preload adjusterApprox.u00a010 mm lower than standard with recommended setupSpring rate 120 N/mmDustcoversUse with original top mountsu00d6hlinsu00a0BMW E9X Fitment:u00a0BMS MI40BMW E90 M3 (2007-13')BMW E92 M3 (2007-13')make-bmw,make-bmw-model-3-series,make-bmw-model-3-series-chassis-e90-e92-e93--2006-13-,make-bmw-model-3-series-chassis-e90-e92-e93--2006-13--submodel-m3 4854140469271 4854140469271_33019273969687 Öhlins Road & Track Coilover Kit for BMW E46 M3 BMS MI30 https://hinzmotorsport.com/products/ohlins-road-track-coilover-kit-for-bmw-e46-m3 Ohlins https://cdn.shopify.com/s/files/1/0045/1179/3186/products/ohlinsBMUMI351_31241c3d-9d66-40de-aec6-cd2cfc16709a.jpg?v=1610726792 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 22498 g 1 Default Title 2,590.00 u00d6hlins Road & Track Coiloversu00a0If you are looking for the highest quality true dual-purpose coilover for both street and track use, look no further than theu00a0u00d6hlinsu00a0Road & Track coilover.The u00d6hlins Road & Track Coilover suspension system has beenu00a0designed for those who are looking for ultimate handling performance without sacrificing daily comfort. Until now, there were compromises when seeking a proper dual-purpose coilover suitable for both street and track duty. The Road & Track coilover has eliminated those compromises with easy adjustability and proper damping and spring selection.When you arrive at the track, just turn the golden knob clockwise to change the stiffness of the shock to the race setting. Adjusting the shock to race mode changes all four areas of the damper; low and high-speed compression and rebound damping.The u00d6hlinsu00a0Road & Track team has extensively tested a wide variety of springs to find the perfect setup for an uncompromised dual-purpose coilover. With that, we recommend the listed spring rate that comes with these dampers (70 N/mm Front, 110 N/mm Rear).They are made out of light-weight aluminum and exceed ISO 9227 standards for corrosion and have a 2-year limited warranty.*All fitments are shown below*General FeaturesDFV technology (Dual Flow Valve)Height adjustableRebuildableCorrosion salt spray tested (ISO 9227)2-year limited warrantyFront:Compression and rebound damping with one adjusterSpring preload adjusterApprox. 20u00a0mm lower than standard with recommended setupSpring rate 70 N/mmDustcoversUse with original top mountsRear:Compression and rebound damping with one adjusterSpring preload adjusterApprox. 20 mm lower than standard with recommended setupSpring rate 110 N/mmDustcoversUse with original top mountsu00d6hlins BMW E46 Fitment: BMS MI30BMW E46 M3 (1999-05')make-bmw,make-bmw-model-3-series,make-bmw-model-3-series-chassis-e46--99-05-,make-bmw-model-3-series-chassis-e46--99-05--submodel-m3 4854138404887 4854138404887_33019269349399 Öhlins Road & Track Coilover Kit for BMW E46 3-Series BMU MI35 https://hinzmotorsport.com/products/ohlins-road-track-coilover-kit-for-bmw-e46-3-series Ohlins https://cdn.shopify.com/s/files/1/0045/1179/3186/products/ohlinsBMUMI351.jpg?v=1610726623 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 22544 g 0 Default Title 2,590.00 u00d6hlins Road & Track Coiloversu00a0If you are looking for the highest quality true dual-purpose coilover for both street and track use, look no further than theu00a0u00d6hlinsu00a0Road & Track coilover.The u00d6hlins Road & Track Coilover suspension system has beenu00a0designed for those who are looking for ultimate handling performance without sacrificing daily comfort. Until now, there were compromises when seeking a proper dual-purpose coilover suitable for both street and track duty. The Road & Track coilover has eliminated those compromises with easy adjustability and proper damping and spring selection.When you arrive at the track, just turn the golden knob clockwise to change the stiffness of the shock to the race setting. Adjusting the shock to race mode changes all four areas of the damper; low and high-speed compression and rebound damping.The u00d6hlinsu00a0Road & Track team has extensively tested a wide variety of springs to find the perfect setup for an uncompromised dual-purpose coilover. With that, we recommend the listed spring rate that comes with these dampers (70 N/mm Front, 110 N/mm Rear).They are made out of light-weight aluminum and exceed ISO 9227 standards for corrosion and have a 2-year limited warranty.*All fitments are shown below*General FeaturesDFV technology (Dual Flow Valve)Height adjustableRebuildableCorrosion salt spray tested (ISO 9227)2-year limited warrantyFront:Compression and rebound damping with one adjusterSpring preload adjusterApprox. 20u00a0mm lower than standard with recommended setupSpring rate 70 N/mmDustcoversUse with original top mountsRear:Compression and rebound damping with one adjusterSpring preload adjusterApprox. 20 mm lower than standard with recommended setupSpring rate 110 N/mmDustcoversUse with original top mountsu00d6hlins BMW E46 Fitment: BMU MI35BMW E46 323i/Ci (1999-05')BMW E46 325i/Ci/Xi (1999-05')BMW E46 328i/Ci (1999-05')make-bmw,make-bmw-model-3-series,make-bmw-model-3-series-chassis-e46--99-05-,make-bmw-model-3-series-chassis-e46--99-05--submodel-323i-ci,make-bmw-model-3-series-chassis-e46--99-05--submodel-325i-ci-xi,make-bmw-model-3-series-chassis-e46--99-05--submodel-328i-ci 4854137815063 4854137815063_33019265548311 Öhlins Road & Track Coilover Kit for BMW F87 M2 BMU MR41 https://hinzmotorsport.com/products/ohlins-road-track-coilover-kit-for-bmw-f87-m2 Ohlins https://cdn.shopify.com/s/files/1/0045/1179/3186/products/ohlinsbmuMr411_d64e71aa-9102-45b6-bc3e-9833f86f3b51.jpg?v=1610725487 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 25220 g 2 No 3,190.00 u00d6hlins Road & Track Coiloversu00a0If you are looking for the highest quality true dual-purpose coilover for both street and track use, look no further than theu00a0u00d6hlinsu00a0Road & Track coilover.The u00d6hlins Road & Track Coilover suspension system has beenu00a0designed for those who are looking for ultimate handling performance without sacrificing daily comfort. Until now, there were compromises when seeking a proper dual-purpose coilover suitable for both street and track duty. The Road & Track coilover has eliminated those compromises with easy adjustability and proper damping and spring selection.When you arrive at the track, just turn the golden knob clockwise to change the stiffness of the shock to the race setting. Adjusting the shock to race mode changes all four areas of the damper; low and high-speed compression and rebound damping.The u00d6hlinsu00a0Road & Track team has extensively tested a wide variety of springs to find the perfect setup for an uncompromised dual-purpose coilover. With that, we recommend the listed spring rate that comes with these dampers (90 N/mm Front, 190 N/mm Rear).They are made out of light-weight aluminum and exceed ISO 9227 standards for corrosion and have a 2-year limited warranty.*All fitments are shown below*General FeaturesDFV technology (Dual Flow Valve)Height adjustableRebuildableCorrosion salt spray tested (ISO 9227)2-year limited warrantyFront:Compression and rebound damping with one adjusterSpring preload adjusterApprox.u00a010u00a0mm lower than standard with recommended setupSpring rate 90 N/mmDustcoversUse with original top mountsRear:Compression and rebound damping with one adjusterSpring preload adjusterApprox.u00a010 mm lower than standard with recommended setupSpring rate 190 N/mmDustcoversUse with original top mountsu00a0Theu00a0u00d6hlins EDC Cancellation Kitu00a0(35020-02)u00a0deactivates dash lights and error codes when electronically adjustable OEM suspension is replaced with a mechanical system. The cancellation kit is plugged into the original suspension controls. No further programming is needed.u00d6hlins BMW F8X Fitment: BMU MR41BMW F82 M2 (2016-20')BMW F80 M3 (2015-20')BMW F82 M4 (2015-20')make-bmw,make-bmw-model-2-series,make-bmw-model-2-series-chassis-f87--2016--,make-bmw-model-2-series-chassis-f87--2016---submodel-m2 4854137815063 4854137815063_33019265581079 Öhlins Road & Track Coilover Kit for BMW F87 M2 BMU MR41 + 35020-02 https://hinzmotorsport.com/products/ohlins-road-track-coilover-kit-for-bmw-f87-m2 Ohlins https://cdn.shopify.com/s/files/1/0045/1179/3186/products/ohlinsbmuMr411_d64e71aa-9102-45b6-bc3e-9833f86f3b51.jpg?v=1610725487 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 26989 g 2 Yes - (35020-02) 3,700.00 u00d6hlins Road & Track Coiloversu00a0If you are looking for the highest quality true dual-purpose coilover for both street and track use, look no further than theu00a0u00d6hlinsu00a0Road & Track coilover.The u00d6hlins Road & Track Coilover suspension system has beenu00a0designed for those who are looking for ultimate handling performance without sacrificing daily comfort. Until now, there were compromises when seeking a proper dual-purpose coilover suitable for both street and track duty. The Road & Track coilover has eliminated those compromises with easy adjustability and proper damping and spring selection.When you arrive at the track, just turn the golden knob clockwise to change the stiffness of the shock to the race setting. Adjusting the shock to race mode changes all four areas of the damper; low and high-speed compression and rebound damping.The u00d6hlinsu00a0Road & Track team has extensively tested a wide variety of springs to find the perfect setup for an uncompromised dual-purpose coilover. With that, we recommend the listed spring rate that comes with these dampers (90 N/mm Front, 190 N/mm Rear).They are made out of light-weight aluminum and exceed ISO 9227 standards for corrosion and have a 2-year limited warranty.*All fitments are shown below*General FeaturesDFV technology (Dual Flow Valve)Height adjustableRebuildableCorrosion salt spray tested (ISO 9227)2-year limited warrantyFront:Compression and rebound damping with one adjusterSpring preload adjusterApprox.u00a010u00a0mm lower than standard with recommended setupSpring rate 90 N/mmDustcoversUse with original top mountsRear:Compression and rebound damping with one adjusterSpring preload adjusterApprox.u00a010 mm lower than standard with recommended setupSpring rate 190 N/mmDustcoversUse with original top mountsu00a0Theu00a0u00d6hlins EDC Cancellation Kitu00a0(35020-02)u00a0deactivates dash lights and error codes when electronically adjustable OEM suspension is replaced with a mechanical system. The cancellation kit is plugged into the original suspension controls. No further programming is needed.u00d6hlins BMW F8X Fitment: BMU MR41BMW F82 M2 (2016-20')BMW F80 M3 (2015-20')BMW F82 M4 (2015-20')make-bmw,make-bmw-model-2-series,make-bmw-model-2-series-chassis-f87--2016--,make-bmw-model-2-series-chassis-f87--2016---submodel-m2 4854136242199 4854136242199_33019258929175 Öhlins Road & Track Coilover Kit for BMW F8X M3/M4 BMU MR41 https://hinzmotorsport.com/products/ohlins-road-track-coilover-kit-for-bmw-f8x-m3-m4 Ohlins https://cdn.shopify.com/s/files/1/0045/1179/3186/products/ohlinsbmuMr411.jpg?v=1610725396 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 25220 g 2 No 3,190.00 u00d6hlins Road & Track Coiloversu00a0If you are looking for the highest quality true dual-purpose coilover for both street and track use, look no further than theu00a0u00d6hlinsu00a0Road & Track coilover.The u00d6hlins Road & Track Coilover suspension system has beenu00a0designed for those who are looking for ultimate handling performance without sacrificing daily comfort. Until now, there were compromises when seeking a proper dual-purpose coilover suitable for both street and track duty. The Road & Track coilover has eliminated those compromises with easy adjustability and proper damping and spring selection.When you arrive at the track, just turn the golden knob clockwise to change the stiffness of the shock to the race setting. Adjusting the shock to race mode changes all four areas of the damper; low and high-speed compression and rebound damping.The u00d6hlinsu00a0Road & Track team has extensively tested a wide variety of springs to find the perfect setup for an uncompromised dual-purpose coilover. With that, we recommend the listed spring rate that comes with these dampers (90 N/mm Front, 190 N/mm Rear).They are made out of light-weight aluminum and exceed ISO 9227 standards for corrosion and have a 2-year limited warranty.*All fitments are shown below*General FeaturesDFV technology (Dual Flow Valve)Height adjustableRebuildableCorrosion salt spray tested (ISO 9227)2-year limited warrantyFront:Compression and rebound damping with one adjusterSpring preload adjusterApprox.u00a010u00a0mm lower than standard with recommended setupSpring rate 90 N/mmDustcoversUse with original top mountsRear:Compression and rebound damping with one adjusterSpring preload adjusterApprox.u00a010 mm lower than standard with recommended setupSpring rate 190 N/mmDustcoversUse with original top mountsu00a0Theu00a0u00d6hlins EDC Cancellation Kitu00a0(35020-02)u00a0deactivates dash lights and error codes when electronically adjustable OEM suspension is replaced with a mechanical system. The cancellation kit is plugged into the original suspension controls. No further programming is needed.u00d6hlins BMW F8X Fitment: BMU MR41BMW F80 M3 (2015-20')BMW F82 M4 (2015-20')BMW F82 M2 (2016-20')make-bmw,make-bmw-model-3-series,make-bmw-model-3-series-chassis-f80--2015--,make-bmw-model-3-series-chassis-f80--2015---submodel-m3,make-bmw-model-4-series,make-bmw-model-4-series-chassis-f82-f83--2015--,make-bmw-model-4-series-chassis-f82-f83--2015---submodel-m4 4854136242199 4854136242199_33019258961943 Öhlins Road & Track Coilover Kit for BMW F8X M3/M4 BMU MR41 + 35020-02 https://hinzmotorsport.com/products/ohlins-road-track-coilover-kit-for-bmw-f8x-m3-m4 Ohlins https://cdn.shopify.com/s/files/1/0045/1179/3186/products/ohlinsbmuMr411.jpg?v=1610725396 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 26989 g 2 Yes - (35020-02) 3,700.00 u00d6hlins Road & Track Coiloversu00a0If you are looking for the highest quality true dual-purpose coilover for both street and track use, look no further than theu00a0u00d6hlinsu00a0Road & Track coilover.The u00d6hlins Road & Track Coilover suspension system has beenu00a0designed for those who are looking for ultimate handling performance without sacrificing daily comfort. Until now, there were compromises when seeking a proper dual-purpose coilover suitable for both street and track duty. The Road & Track coilover has eliminated those compromises with easy adjustability and proper damping and spring selection.When you arrive at the track, just turn the golden knob clockwise to change the stiffness of the shock to the race setting. Adjusting the shock to race mode changes all four areas of the damper; low and high-speed compression and rebound damping.The u00d6hlinsu00a0Road & Track team has extensively tested a wide variety of springs to find the perfect setup for an uncompromised dual-purpose coilover. With that, we recommend the listed spring rate that comes with these dampers (90 N/mm Front, 190 N/mm Rear).They are made out of light-weight aluminum and exceed ISO 9227 standards for corrosion and have a 2-year limited warranty.*All fitments are shown below*General FeaturesDFV technology (Dual Flow Valve)Height adjustableRebuildableCorrosion salt spray tested (ISO 9227)2-year limited warrantyFront:Compression and rebound damping with one adjusterSpring preload adjusterApprox.u00a010u00a0mm lower than standard with recommended setupSpring rate 90 N/mmDustcoversUse with original top mountsRear:Compression and rebound damping with one adjusterSpring preload adjusterApprox.u00a010 mm lower than standard with recommended setupSpring rate 190 N/mmDustcoversUse with original top mountsu00a0Theu00a0u00d6hlins EDC Cancellation Kitu00a0(35020-02)u00a0deactivates dash lights and error codes when electronically adjustable OEM suspension is replaced with a mechanical system. The cancellation kit is plugged into the original suspension controls. No further programming is needed.u00d6hlins BMW F8X Fitment: BMU MR41BMW F80 M3 (2015-20')BMW F82 M4 (2015-20')BMW F82 M2 (2016-20')make-bmw,make-bmw-model-3-series,make-bmw-model-3-series-chassis-f80--2015--,make-bmw-model-3-series-chassis-f80--2015---submodel-m3,make-bmw-model-4-series,make-bmw-model-4-series-chassis-f82-f83--2015--,make-bmw-model-4-series-chassis-f82-f83--2015---submodel-m4 4854133948439 4854133948439_33019254439959 Öhlins Road & Track Coilover Kit for BMW E82 1M BMZ MN01 https://hinzmotorsport.com/products/ohlins-road-track-coilover-kit-for-bmw-e82-1m Ohlins https://cdn.shopify.com/s/files/1/0045/1179/3186/products/ohlinsBMZMN011M1.jpg?v=1610724053 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 23451 g 1 Default Title 2,890.00 u00d6hlins Road & Track Coiloversu00a0If you are looking for the highest quality true dual-purpose coilover for both street and track use, look no further than theu00a0u00d6hlinsu00a0Road & Track coilover.The u00d6hlins Road & Track Coilover suspension system has beenu00a0designed for those who are looking for ultimate handling performance without sacrificing daily comfort. Until now, there were compromises when seeking a proper dual-purpose coilover suitable for both street and track duty. The Road & Track coilover has eliminated those compromises with easy adjustability and proper damping and spring selection.When you arrive at the track, just turn the golden knob clockwise to change the stiffness of the shock to the race setting. Adjusting the shock to race mode changes all four areas of the damper; low and high-speed compression and rebound damping.The u00d6hlinsu00a0Road & Track team has extensively tested a wide variety of springs to find the perfect setup for an uncompromised dual-purpose coilover. With that, we recommend the listed spring rate that comes with these dampers (60N/mm Front, 110N/mm Rear).They are made out of light-weight aluminum and exceed ISO 9227 standards for corrosion and have a 2-year limited warranty.General FeaturesDFV technology (Dual Flow Valve)20 Clicks of damping adjustmentu00a0Height adjustableRebuildableCorrosion salt spray tested (ISO 9227)2-year limited warrantyFront:McPherson strut, upside downCompression and rebound damping with one adjusterSpring preload adjusterApprox. 15u00a0mm lower than standard with recommended setupSpring rate 60 N/mmDustcoversUse with original top mountsRear:Compression and rebound damping with one adjusterSpring preload adjusterApprox.u00a010u00a0mm lower than standard with recommended setupSpring rate 110 N/mmDustcoversUse with original top mountsu00d6hlins BMW Fitment:u00a0BMZ MN01BMW E82 1M (2011-12')make-bmw,make-bmw-model-1-series,make-bmw-model-1-series-chassis-e82--2008-13-,make-bmw-model-1-series-chassis-e82--2008-13--submodel-1m 4854132047895 4854132047895_33019243823127 Öhlins Dedicated Track Coilover Kit for BMW E46 3 Series / M3 BMU MU30 https://hinzmotorsport.com/products/ohlins-dedicated-track-coilover-kit-for-bmw-e46-3-series-m3 Ohlins https://cdn.shopify.com/s/files/1/0045/1179/3186/products/ohlinse9xm3dedicatedtrack_b228b503-1454-4254-9369-139cad7c1b03.png?v=1610722148 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 24176 g 0 Default Title 3,750.00 u00d6hlins Dedicated Track Coiloversu00a0If you are looking for the highest quality coilovers for track use, look no further than theu00a0u00d6hlinsu00a0DEDICATED suspension system. These coilovers offer race-level performance ready to bolt onto your car.These coilovers are built with Swift springs manufactured to u00d6hlins specs. Shake rig developed and track validated with specific spring rates, clicker settings, and ride height specifications. The entire performance picture is taken into account when developing their DEDICATEDu00a0systems, as each is engineered to perform with proven track setups for each specific chassis.Systems utilize Dual Flow Valve technology allowing engineers to tune force curves ideally balanced for chassis support and maintaining traction over pavement irregularities and on-track curb strikes. Spherical upper mounts included.The u00d6hlinsu00a0team has extensively tested a wide variety of springs to find the perfect setup for track-focused coilover. With that, we recommend the listed spring rate that comes with these dampers (120N/mm Front, 160N/mm Rear).Highlightedu00a0Features:DFV Technology (Dual Flow Valve)Developed for Track CarsAdjustable Damping and Ride HeightIncludes Spherical Upper MountsRebuildableFront:Racing Camber PlatesCompression and rebound damping with one adjusterSpring preload adjusterApprox. 20 mm lower than standard with recommended setupSpring Rate 120 N/mmTender Race SpringRear:Spherical bearing rear upper shock mountsCompression and rebound damping with one adjusterSpring preload adjusterApprox. 20 mm lower than standard with recommended setupSpring Rate 160 N/mmFitment: BMU MU30BMW E46u00a0M3 (2001-06')BMW E46 323i/Ci (1999-05')BMW E46 325i/Ci/Xi (1999-05')BMW E46 328i/Ci (1999-05')make-bmw,make-bmw-model-3-series,make-bmw-model-3-series-chassis-e46--99-05-,make-bmw-model-3-series-chassis-e46--99-05--submodel-323i-ci,make-bmw-model-3-series-chassis-e46--99-05--submodel-325i-ci-xi,make-bmw-model-3-series-chassis-e46--99-05--submodel-328i-ci,make-bmw-model-3-series-chassis-e46--99-05--submodel-m3 4854115434519 4854115434519_33019207352343 Öhlins Dedicated Track Coilover Kit for BMW E9X M3 BMU MU40 https://hinzmotorsport.com/products/ohlins-dedicated-track-coilover-kit-for-bmw-e9x-m3 Ohlins https://cdn.shopify.com/s/files/1/0045/1179/3186/products/ohlinse9xm3dedicatedtrack.png?v=1610721500 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 25945 g 0 No 3,450.00 u00d6hlins Dedicated Track Coiloversu00a0If you are looking for the highest quality coilovers for track use, look no further than theu00a0u00d6hlinsu00a0DEDICATED suspension system. These coilovers offer race-level performance ready to bolt onto your car.These coilovers are built with Swift springs manufactured to u00d6hlins specs. Shake rig developed and track validated with specific spring rates, clicker settings, and ride height specifications. The entire performance picture is taken into account when developing their DEDICATEDu00a0systems, as each is engineered to perform with proven track setups for each specific chassis.Systems utilize Dual Flow Valve technology allowing engineers to tune force curves ideally balanced for chassis support and maintaining traction over pavement irregularities and on-track curb strikes. Spherical upper mounts included.The u00d6hlinsu00a0team has extensively tested a wide variety of springs to find the perfect setup for track-focused coilover. With that, we recommend the listed spring rate that comes with these dampers (120N/mm Front, 180N/mm Rear).Highlightedu00a0Features:DFV Technology (Dual Flow Valve)Developed for Track CarsAdjustable Damping and Ride HeightIncludes Spherical Upper MountsRebuildableFront:Racing Camber PlatesCompression and rebound damping with one adjusterSpring preload adjusterApprox.u00a015 mm lower than standard with recommended setupSpring Rate 120 N/mmTender Race SpringRear:Spherical bearing rear upper shock mountsCompression and rebound damping with one adjusterSpring preload adjusterApprox.u00a010 mm lower than standard with recommended setupSpring Rate 180 N/mmTheu00a0u00d6hlins EDC Cancellation Kitu00a0(35020-04)u00a0deactivates dash lights and error codes when electronically adjustable OEM suspension is replaced with a mechanical system. The cancellation kit is plugged into the original suspension controls. No further programming is needed.Fitment: BMU MU40BMW E90 / E92 M3 (2008-13')make-bmw,make-bmw-model-3-series,make-bmw-model-3-series-chassis-e90-e92-e93--2006-13-,make-bmw-model-3-series-chassis-e90-e92-e93--2006-13--submodel-m3 4854115434519 4854115434519_33019207385111 Öhlins Dedicated Track Coilover Kit for BMW E9X M3 BMU MU40 + 35020-04 https://hinzmotorsport.com/products/ohlins-dedicated-track-coilover-kit-for-bmw-e9x-m3 Ohlins https://cdn.shopify.com/s/files/1/0045/1179/3186/products/ohlinse9xm3dedicatedtrack.png?v=1610721500 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 25945 g 0 Yes - (35020-04) 3,960.00 u00d6hlins Dedicated Track Coiloversu00a0If you are looking for the highest quality coilovers for track use, look no further than theu00a0u00d6hlinsu00a0DEDICATED suspension system. These coilovers offer race-level performance ready to bolt onto your car.These coilovers are built with Swift springs manufactured to u00d6hlins specs. Shake rig developed and track validated with specific spring rates, clicker settings, and ride height specifications. The entire performance picture is taken into account when developing their DEDICATEDu00a0systems, as each is engineered to perform with proven track setups for each specific chassis.Systems utilize Dual Flow Valve technology allowing engineers to tune force curves ideally balanced for chassis support and maintaining traction over pavement irregularities and on-track curb strikes. Spherical upper mounts included.The u00d6hlinsu00a0team has extensively tested a wide variety of springs to find the perfect setup for track-focused coilover. With that, we recommend the listed spring rate that comes with these dampers (120N/mm Front, 180N/mm Rear).Highlightedu00a0Features:DFV Technology (Dual Flow Valve)Developed for Track CarsAdjustable Damping and Ride HeightIncludes Spherical Upper MountsRebuildableFront:Racing Camber PlatesCompression and rebound damping with one adjusterSpring preload adjusterApprox.u00a015 mm lower than standard with recommended setupSpring Rate 120 N/mmTender Race SpringRear:Spherical bearing rear upper shock mountsCompression and rebound damping with one adjusterSpring preload adjusterApprox.u00a010 mm lower than standard with recommended setupSpring Rate 180 N/mmTheu00a0u00d6hlins EDC Cancellation Kitu00a0(35020-04)u00a0deactivates dash lights and error codes when electronically adjustable OEM suspension is replaced with a mechanical system. The cancellation kit is plugged into the original suspension controls. No further programming is needed.Fitment: BMU MU40BMW E90 / E92 M3 (2008-13')make-bmw,make-bmw-model-3-series,make-bmw-model-3-series-chassis-e90-e92-e93--2006-13-,make-bmw-model-3-series-chassis-e90-e92-e93--2006-13--submodel-m3 4853906145303 4853906145303_33018288701463 Öhlins U78055-01 Rear Clicker Extension Kit Porsche 911 996/997 U78055-01 https://hinzmotorsport.com/products/ohlins-u78055-01-rear-damper-adjustment-extension-kit-porsche-911-996-997 Ohlins https://cdn.shopify.com/s/files/1/0045/1179/3186/products/ohlinsU78055-01.jpg?v=1610669974 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 100 g 1 Default Title 129.99 u00d6hlins Clicker Rear Extension KitAllows for easy access to the damping adjustment when your car is equipped with a BOSE sound system or is a cabriolet/convertible. The adjuster will be extended and placed above the rear panel.Includes:2x Control Wire 280mm Length2x Adapter2x Control Knob2x Screw control Knob M4x0.7Fitment: U78055-01All 996 & 997 Modelsmake-porsche,make-porsche-model-911,make-porsche-model-911-chassis-996--1999-2004-,make-porsche-model-911-chassis-996--1999-2004--submodel-carrera---carrera-4--3-4l-,make-porsche-model-911-chassis-996--1999-2004--submodel-carrera---carrera-4--3-6l-,make-porsche-model-911-chassis-996--1999-2004--submodel-carrera-4s--3-6l-,make-porsche-model-911-chassis-996--1999-2004--submodel-gt2--2002-05-,make-porsche-model-911-chassis-996--1999-2004--submodel-gt3--1999-01-,make-porsche-model-911-chassis-996--1999-2004--submodel-gt3--2002-04-,make-porsche-model-911-chassis-996--1999-2004--submodel-gt3-rs,make-porsche-model-911-chassis-996--1999-2004--submodel-turbo--2001-05-,make-porsche-model-911-chassis-996--1999-2004--submodel-turbo-s--2001-05-,make-porsche-model-911-chassis-997--2005-2008-,make-porsche-model-911-chassis-997--2005-2008--submodel-carrera---carrera-4--3-6l-,make-porsche-model-911-chassis-997--2005-2008--submodel-carrera-s---carrera-4s--3-8l-,make-porsche-model-911-chassis-997--2005-2008--submodel-gt2,make-porsche-model-911-chassis-997--2005-2008--submodel-gt3-rs,make-porsche-model-911-chassis-997--2005-2008--submodel-gt3,make-porsche-model-911-chassis-997--2005-2008--submodel-turbo--3-6l-,make-porsche-model-911-chassis-997--2005-2008--submodel-turbo-s--3-6l-,make-porsche-model-911-chassis-997-2--2009-2012-,make-porsche-model-911-chassis-997-2--2009-2012--submodel-carrera---carrera-4--3-6l-,make-porsche-model-911-chassis-997-2--2009-2012--submodel-carrera-gts---carrera-4gts,make-porsche-model-911-chassis-997-2--2009-2012--submodel-carrera-s---carrera-4s--3-8l-,make-porsche-model-911-chassis-997-2--2009-2012--submodel-gt2,make-porsche-model-911-chassis-997-2--2009-2012--submodel-gt2rs,make-porsche-model-911-chassis-997-2--2009-2012--submodel-gt3-rs,make-porsche-model-911-chassis-997-2--2009-2012--submodel-gt3,make-porsche-model-911-chassis-997-2--2009-2012--submodel-turbo--3-8l-,make-porsche-model-911-chassis-997-2--2009-2012--submodel-turbo-s--3-8l- 4853892775959 4853892775959_33018269564951 Öhlins TTX-PRO Coilover System for Porsche 911 997 GT3 / GT3 RS POU MQ00 https://hinzmotorsport.com/products/ohlins-ttx-pro-coilover-system-for-porsche-911-997-gt3-gt3-rs Ohlins https://cdn.shopify.com/s/files/1/0045/1179/3186/products/ohlinsttxpro997cup1_02a1a994-1663-4f50-8f8a-0fc11993558a.jpg?v=1610668540 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 24494 g 1 Default Title 7,290.00 u00d6hlinsu00a0TTX PRO Coiloversu00a0The u00d6hlins TTX-Pro range of suspension systems have been developed for discerning club level racers and track day aficionados looking to utilize identical technology as the pros use to maximize performance.u00a0u00d6hlins TTX dampers are pressure balanced at every clicker setting without the need for excessive nitrogen pressure, resulting in a broad range of adjustability without cavitation.u00a0The u00d6hlins TTX Motorsport Kits feature the famous TTX (Twin-Tube) technology. This particular kit has been custom made for the Porsche 997 GT3 & GT3 RS. It offers a unique combination of a 46mm, two-way adjusted, through-rod, and lightweight McPherson strut for the front and a 36mm rear-mounted TTX shock that will completely transform your car.The u00d6hlins TTX 46 and TTX 36 shock absorbers are developed fromu00a0u00d6hlins participation in GT and Touring car racing. That givesu00a0u00d6hlins Clubsports kits a massive advantage. They are solely focused on providing the car with the best possible condition to set fast lap times without losing control. A fast vehicle also needs to give the driver a sense of safety, confidence, and performance and the TTX system does exactly that.On the race track, this all translates to faster lap times. With that said, you are only a few clicks away from a comfortable street setting when driving to and from the track, or as a daily driver. The two-way adjustability of the shocks allows you to fine-tune the handling at each track you visit or the tires you run.The u00d6hlinsu00a0team has extensively tested a wide variety ofu00a0settings to find the perfect setup for an uncompromised coilover.u00a0They are made out of light-weight aluminum and exceed ISO 9227 standards for corrosion and have a 2-year limited warranty.Highlighted FeaturesTTX TechnologyDyno Matched for consistent handlingRide Height Adjustable (15mm lower than stock)RebuildableCorrosion salt spray tested (ISO 9227)2-year limited warrantyFront:Two-way adjustableu00a0 (independent compression and rebound adjustment)Spring preload adjusterSpring rate 120 N/mmu00a0Rear:Two-way adjustableu00a0(independent compression and rebound adjustment)Spring preload adjusterSpring rate 170 N/mmFitment: POU MQ00997 -u00a0911 GT3 3.6 (2007-08')997 - 911 GT3 RS 3.6 (2007-08')997.2 - 911 GT3 3.8 (2009-12')997.2 - 911 GT3 RS 3.8 (2009-12')997.2 - 911 GT3 RS 4.0 (2009-12')make-porsche,make-porsche-model-911,make-porsche-model-911-chassis-997--2005-2008-,make-porsche-model-911-chassis-997--2005-2008--submodel-gt3-rs,make-porsche-model-911-chassis-997--2005-2008--submodel-gt3,make-porsche-model-911-chassis-997-2--2009-2012-,make-porsche-model-911-chassis-997-2--2009-2012--submodel-gt3-rs,make-porsche-model-911-chassis-997-2--2009-2012--submodel-gt3 4853887991831 4853887991831_33018257506327 Öhlins TTX-PRO Coilover System for Porsche 911 997 GT3 Cup POU MQ30 https://hinzmotorsport.com/products/ohlins-ttx-pro-coilover-system-for-porsche-911-997-gt3-cup Ohlins https://cdn.shopify.com/s/files/1/0045/1179/3186/products/ohlinsttxpro997cup1.jpg?v=1610667631 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 24494 g 0 Default Title 7,290.00 u00d6hlinsu00a0TTX PRO Coiloversu00a0The u00d6hlins TTX-Pro range of suspension systems have been developed for discerning club level racers and track day aficionados looking to utilize identical technology as the pros use to maximize performance.u00a0u00d6hlins TTX dampers are pressure balanced at every clicker setting without the need for excessive nitrogen pressure, resulting in a broad range of adjustability without cavitation.u00a0The u00d6hlins TTX Motorsport Kits feature the famous TTX (Twin-Tube) technology. This particular kit has been custom made for the Porsche 997 GT3 Cup. It offers a unique combination of a 46mm, two-way adjusted, through-rod, and lightweight McPherson strut for the front and a 36mm rear-mounted TTX shock that will completely transform your car.The u00d6hlins TTX 46 and TTX 36 shock absorbers are developed fromu00a0u00d6hlins participation in GT and Touring car racing. That givesu00a0u00d6hlins Clubsports kits a massive advantage. They are solely focused on providing the car with the best possible condition to set fast lap times without losing control. A fast vehicle also needs to give the driver a sense of safety, confidence, and performance and the TTX system does exactly that.On the race track, this all translates to faster lap times. The two-way adjustability of the shocks allows you to fine-tune the handling at each track you visit or the tires you run.The u00d6hlinsu00a0team has extensively tested a wide variety ofu00a0settings to find the perfect setup for an uncompromised coilover.u00a0They are made out of light-weight aluminum and exceed ISO 9227 standards for corrosion and have a 2-year limited warranty.Highlighted FeaturesTTX TechnologyDyno Matched for consistent handlingHeight adjustableu00a0RebuildableCorrosion salt spray tested (ISO 9227)2-year limited warrantyFront:Two-way adjustableu00a0 (independent compression and rebound adjustment)Spring preload adjusterSpring rate 220 N/mmu00a0Rear:Two-way adjustableu00a0(independent compression and rebound adjustment)Spring preload adjusterSpring rate 220 N/mmFitment: POU MQ30997 -u00a0911 GT3 Cup (2015-12')make-porsche,make-porsche-model-911,make-porsche-model-911-chassis-997--2005-2008-,make-porsche-model-911-chassis-997--2005-2008--submodel-gt3-cup,make-porsche-model-911-chassis-997-2--2009-2012-,make-porsche-model-911-chassis-997-2--2009-2012--submodel-gt3-cup 4853885337623 4853885337623_33018252558359 Öhlins TTX-PRO Coilover System for Porsche 911 991 GT3 POU MR00 https://hinzmotorsport.com/products/ohlins-ttx-pro-coilover-system-for-porsche-911-991-gt3 Ohlins https://cdn.shopify.com/s/files/1/0045/1179/3186/products/981gt4ttxpro1_64b435a7-178e-4b3d-99bc-d068501816c5.jpg?v=1610665748 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 24494 g 0 No Thanks 6,990.00 u00d6hlinsu00a0TTX PRO Coiloversu00a0The u00d6hlins TTX-Pro range of suspension systems have been developed for discerning club level racers and track day aficionados looking to utilize identical technology as the pros use to maximize performance.u00a0u00d6hlins TTX dampers are pressure balanced at every clicker setting without the need for excessive nitrogen pressure, resulting in a broad range of adjustability without cavitation.u00a0The u00d6hlins TTX Motorsport Kits feature the famous TTX (Twin-Tube) technology. This particular kit has been custom made for the Porsche 991u00a0GT3. It offers a unique combination of a 46mm, two-way adjusted, through-rod, and lightweight McPherson strut for the front and a 36mm rear-mounted TTX shock that will completely transform your car.The u00d6hlins TTX 46 and TTX 36 shock absorbers are developed fromu00a0u00d6hlins participation in GT and Touring car racing. That givesu00a0u00d6hlins Clubsports kits a massive advantage. They are solely focused on providing the car with the best possible condition to set fast lap times without losing control. A fast vehicle also needs to give the driver a sense of safety, confidence, and performance and the TTX system does exactly that.On the race track, this all translates to faster lap times. The two-way adjustability of the shocks allows you to fine-tune the handling at each track you visit or the tires you run.The u00d6hlinsu00a0team has extensively tested a wide variety ofu00a0settings to find the perfect setup for an uncompromised coilover. With that, we recommend the listed spring rate that comes with these dampers (100 N/mm Front, 200 N/mm Rear).They are made out of light-weight aluminum and exceed ISO 9227 standards for corrosion and have a 2-year limited warranty.*Factory lift system must be disabled on equipped vehicles*Highlighted FeaturesTTX TechnologyDyno Matched for consistent handlingHeight adjustableu00a0RebuildableCorrosion salt spray tested (ISO 9227)2-year limited warrantyFront:Two-way adjustableu00a0 (independent compression and rebound adjustment)Spring preload adjusterApprox. 20 mm lower than standard with recommended setupSpring rate 100 N/mmu00a0Help Spring rate 7.5 N/mmRear:Two-way adjustableu00a0(independent compression and rebound adjustment)Spring preload adjusterApprox. 20 mm lower than standard with recommended setupSpring rate 200 N/mmHelper Spring rate 7.5 N/mmTheu00a0u00d6hlins EDC Cancellation Kitu00a0(35020-13)u00a0for Road and Track deactivates dash lights and error codes when electronically adjustable OEM suspension is replaced with a mechanical system. The cancellation kit is plugged into the original suspension controls. No further programming is needed.u00a0*Only needed for vehicles equipped with PASM*Fitment: POU MR00991 - Porsche 911 GT3 (2014-16')991.2 - Porsche 911 GT3 (2017-19')make-porsche,make-porsche-model-911,make-porsche-model-911-chassis-991--2012-2016-,make-porsche-model-911-chassis-991--2012-2016--submodel-gt3,make-porsche-model-911-chassis-991-2--2017-2019-,make-porsche-model-911-chassis-991-2--2017-2019--submodel-gt3 4853885337623 4853885337623_33018252591127 Öhlins TTX-PRO Coilover System for Porsche 911 991 GT3 POU MR00 + 35020-13 https://hinzmotorsport.com/products/ohlins-ttx-pro-coilover-system-for-porsche-911-991-gt3 Ohlins https://cdn.shopify.com/s/files/1/0045/1179/3186/products/981gt4ttxpro1_64b435a7-178e-4b3d-99bc-d068501816c5.jpg?v=1610665748 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 24494 g 0 Yes - (35020-13) 7,670.00 u00d6hlinsu00a0TTX PRO Coiloversu00a0The u00d6hlins TTX-Pro range of suspension systems have been developed for discerning club level racers and track day aficionados looking to utilize identical technology as the pros use to maximize performance.u00a0u00d6hlins TTX dampers are pressure balanced at every clicker setting without the need for excessive nitrogen pressure, resulting in a broad range of adjustability without cavitation.u00a0The u00d6hlins TTX Motorsport Kits feature the famous TTX (Twin-Tube) technology. This particular kit has been custom made for the Porsche 991u00a0GT3. It offers a unique combination of a 46mm, two-way adjusted, through-rod, and lightweight McPherson strut for the front and a 36mm rear-mounted TTX shock that will completely transform your car.The u00d6hlins TTX 46 and TTX 36 shock absorbers are developed fromu00a0u00d6hlins participation in GT and Touring car racing. That givesu00a0u00d6hlins Clubsports kits a massive advantage. They are solely focused on providing the car with the best possible condition to set fast lap times without losing control. A fast vehicle also needs to give the driver a sense of safety, confidence, and performance and the TTX system does exactly that.On the race track, this all translates to faster lap times. The two-way adjustability of the shocks allows you to fine-tune the handling at each track you visit or the tires you run.The u00d6hlinsu00a0team has extensively tested a wide variety ofu00a0settings to find the perfect setup for an uncompromised coilover. With that, we recommend the listed spring rate that comes with these dampers (100 N/mm Front, 200 N/mm Rear).They are made out of light-weight aluminum and exceed ISO 9227 standards for corrosion and have a 2-year limited warranty.*Factory lift system must be disabled on equipped vehicles*Highlighted FeaturesTTX TechnologyDyno Matched for consistent handlingHeight adjustableu00a0RebuildableCorrosion salt spray tested (ISO 9227)2-year limited warrantyFront:Two-way adjustableu00a0 (independent compression and rebound adjustment)Spring preload adjusterApprox. 20 mm lower than standard with recommended setupSpring rate 100 N/mmu00a0Help Spring rate 7.5 N/mmRear:Two-way adjustableu00a0(independent compression and rebound adjustment)Spring preload adjusterApprox. 20 mm lower than standard with recommended setupSpring rate 200 N/mmHelper Spring rate 7.5 N/mmTheu00a0u00d6hlins EDC Cancellation Kitu00a0(35020-13)u00a0for Road and Track deactivates dash lights and error codes when electronically adjustable OEM suspension is replaced with a mechanical system. The cancellation kit is plugged into the original suspension controls. No further programming is needed.u00a0*Only needed for vehicles equipped with PASM*Fitment: POU MR00991 - Porsche 911 GT3 (2014-16')991.2 - Porsche 911 GT3 (2017-19')make-porsche,make-porsche-model-911,make-porsche-model-911-chassis-991--2012-2016-,make-porsche-model-911-chassis-991--2012-2016--submodel-gt3,make-porsche-model-911-chassis-991-2--2017-2019-,make-porsche-model-911-chassis-991-2--2017-2019--submodel-gt3 4853881077783 4853881077783_33018248626199 Öhlins TTX-PRO Coilover System for Porsche 911 991 GT3 RS POU MR01 https://hinzmotorsport.com/products/ohlins-ttx-pro-coilover-system-for-porsche-911-991-gt3-rs Ohlins https://cdn.shopify.com/s/files/1/0045/1179/3186/products/981gt4ttxpro1_94e40e46-713f-4c47-876a-5e01acf49ccb.jpg?v=1610664436 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 24494 g 0 No Thanks 6,990.00 u00d6hlinsu00a0TTX PRO Coiloversu00a0The u00d6hlins TTX-Pro range of suspension systems have been developed for discerning club level racers and track day aficionados looking to utilize identical technology as the pros use to maximize performance.u00a0u00d6hlins TTX dampers are pressure balanced at every clicker setting without the need for excessive nitrogen pressure, resulting in a broad range of adjustability without cavitation.u00a0The u00d6hlins TTX Motorsport Kits feature the famous TTX (Twin-Tube) technology. This particular kit has been custom made for the Porsche 991u00a0GT3 RS. It offers a unique combination of a 46mm, two-way adjusted, through-rod, and lightweight McPherson strut for the front and a 36mm rear-mounted TTX shock that will completely transform your car.The u00d6hlins TTX 46 and TTX 36 shock absorbers are developed fromu00a0u00d6hlins participation in GT and Touring car racing. That givesu00a0u00d6hlins Clubsports kits a massive advantage. They are solely focused on providing the car with the best possible condition to set fast lap times without losing control. A fast vehicle also needs to give the driver a sense of safety, confidence, and performance and the TTX system does exactly that.On the race track, this all translates to faster lap times. The two-way adjustability of the shocks allows you to fine-tune the handling at each track you visit or the tires you run.The u00d6hlinsu00a0team has extensively tested a wide variety ofu00a0settings to find the perfect setup for an uncompromised coilover. With that, we recommend the listed spring rate that comes with these dampers (120 N/mm Front, 200 N/mm Rear).They are made out of light-weight aluminum and exceed ISO 9227 standards for corrosion and have a 2-year limited warranty.*Factory lift system must be disabled on equipped vehicles*Highlighted FeaturesTTX TechnologyDyno Matched for consistent handlingHeight adjustableu00a0RebuildableCorrosion salt spray tested (ISO 9227)2-year limited warrantyFront:Two-way adjustableu00a0 (independent compression and rebound adjustment)Spring preload adjusterApprox.u00a015 mm lower than standard with recommended setupSpring rate 120 N/mmu00a0Rear:Two-way adjustableu00a0(independent compression and rebound adjustment)Spring preload adjusterApprox.u00a015 mm lower than standard with recommended setupSpring rate 200 N/mmTheu00a0u00d6hlins EDC Cancellation Kitu00a0(35020-13)u00a0for Road and Track deactivates dash lights and error codes when electronically adjustable OEM suspension is replaced with a mechanical system. The cancellation kit is plugged into the original suspension controls. No further programming is needed.u00a0*Only needed for vehicles equipped with PASM*Fitment: POU MR01991 - Porsche 911 GT3 RS (2014-16')991.2 - Porsche 911 GT3 RS (2017-19')make-porsche,make-porsche-model-911,make-porsche-model-911-chassis-991--2012-2016-,make-porsche-model-911-chassis-991--2012-2016--submodel-gt3-rs,make-porsche-model-911-chassis-991-2--2017-2019-,make-porsche-model-911-chassis-991-2--2017-2019--submodel-gt3-rs 4853881077783 4853881077783_33018248658967 Öhlins TTX-PRO Coilover System for Porsche 911 991 GT3 RS POU MR01 + 35020-13 https://hinzmotorsport.com/products/ohlins-ttx-pro-coilover-system-for-porsche-911-991-gt3-rs Ohlins https://cdn.shopify.com/s/files/1/0045/1179/3186/products/981gt4ttxpro1_94e40e46-713f-4c47-876a-5e01acf49ccb.jpg?v=1610664436 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 24494 g 0 Yes - (35020-13) 7,670.00 u00d6hlinsu00a0TTX PRO Coiloversu00a0The u00d6hlins TTX-Pro range of suspension systems have been developed for discerning club level racers and track day aficionados looking to utilize identical technology as the pros use to maximize performance.u00a0u00d6hlins TTX dampers are pressure balanced at every clicker setting without the need for excessive nitrogen pressure, resulting in a broad range of adjustability without cavitation.u00a0The u00d6hlins TTX Motorsport Kits feature the famous TTX (Twin-Tube) technology. This particular kit has been custom made for the Porsche 991u00a0GT3 RS. It offers a unique combination of a 46mm, two-way adjusted, through-rod, and lightweight McPherson strut for the front and a 36mm rear-mounted TTX shock that will completely transform your car.The u00d6hlins TTX 46 and TTX 36 shock absorbers are developed fromu00a0u00d6hlins participation in GT and Touring car racing. That givesu00a0u00d6hlins Clubsports kits a massive advantage. They are solely focused on providing the car with the best possible condition to set fast lap times without losing control. A fast vehicle also needs to give the driver a sense of safety, confidence, and performance and the TTX system does exactly that.On the race track, this all translates to faster lap times. The two-way adjustability of the shocks allows you to fine-tune the handling at each track you visit or the tires you run.The u00d6hlinsu00a0team has extensively tested a wide variety ofu00a0settings to find the perfect setup for an uncompromised coilover. With that, we recommend the listed spring rate that comes with these dampers (120 N/mm Front, 200 N/mm Rear).They are made out of light-weight aluminum and exceed ISO 9227 standards for corrosion and have a 2-year limited warranty.*Factory lift system must be disabled on equipped vehicles*Highlighted FeaturesTTX TechnologyDyno Matched for consistent handlingHeight adjustableu00a0RebuildableCorrosion salt spray tested (ISO 9227)2-year limited warrantyFront:Two-way adjustableu00a0 (independent compression and rebound adjustment)Spring preload adjusterApprox.u00a015 mm lower than standard with recommended setupSpring rate 120 N/mmu00a0Rear:Two-way adjustableu00a0(independent compression and rebound adjustment)Spring preload adjusterApprox.u00a015 mm lower than standard with recommended setupSpring rate 200 N/mmTheu00a0u00d6hlins EDC Cancellation Kitu00a0(35020-13)u00a0for Road and Track deactivates dash lights and error codes when electronically adjustable OEM suspension is replaced with a mechanical system. The cancellation kit is plugged into the original suspension controls. No further programming is needed.u00a0*Only needed for vehicles equipped with PASM*Fitment: POU MR01991 - Porsche 911 GT3 RS (2014-16')991.2 - Porsche 911 GT3 RS (2017-19')make-porsche,make-porsche-model-911,make-porsche-model-911-chassis-991--2012-2016-,make-porsche-model-911-chassis-991--2012-2016--submodel-gt3-rs,make-porsche-model-911-chassis-991-2--2017-2019-,make-porsche-model-911-chassis-991-2--2017-2019--submodel-gt3-rs 4853870034967 4853870034967_33018199539735 Öhlins TTX-PRO Coilover System for Porsche 911 991 GT3 Cup POU MR30 https://hinzmotorsport.com/products/ohlins-ttx-pro-coilover-system-for-porsche-911-991-gt3-cup Ohlins https://cdn.shopify.com/s/files/1/0045/1179/3186/products/981gt4ttxpro1_115475d6-261a-4aee-aee0-9faa987666cf.jpg?v=1610661684 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 24494 g 0 Default Title 6,990.00 u00d6hlinsu00a0TTX PRO Coiloversu00a0The u00d6hlins TTX-Pro range of suspension systems have been developed for discerning club level racers and track day aficionados looking to utilize identical technology as the pros use to maximize performance.u00a0u00d6hlins TTX dampers are pressure balanced at every clicker setting without the need for excessive nitrogen pressure, resulting in a broad range of adjustability without cavitation.u00a0The u00d6hlins TTX Motorsport Kits feature the famous TTX (Twin-Tube) technology. This particular kit has been custom made for the Porsche 991 GT3 Cup. It offers a unique combination of a 46mm, two-way adjusted, through-rod, and lightweight McPherson strut for the front and a 36mm rear-mounted TTX shock that will completely transform your car.The u00d6hlins TTX 46 and TTX 36 shock absorbers are developed fromu00a0u00d6hlins participation in GT and Touring car racing. That givesu00a0u00d6hlins Clubsports kits a massive advantage. They are solely focused on providing the car with the best possible condition to set fast lap times without losing control. A fast vehicle also needs to give the driver a sense of safety, confidence, and performance and the TTX system does exactly that.On the race track, this all translates to faster lap times. The two-way adjustability of the shocks allows you to fine-tune the handling at each track you visit or the tires you run.The u00d6hlinsu00a0team has extensively tested a wide variety ofu00a0settings to find the perfect setup for an uncompromised coilover. With that, we recommend the listed spring rate that comes with these dampers (120 N/mm Front, 240 N/mm Rear).They are made out of light-weight aluminum and exceed ISO 9227 standards for corrosion and have a 2-year limited warranty.Highlighted FeaturesTTX TechnologyDyno Matched for consistent handlingHeight adjustableu00a0RebuildableCorrosion salt spray tested (ISO 9227)2-year limited warrantyFront:Two-way adjustableu00a0 (independent compression and rebound adjustment)Spring preload adjusterSpring rate 120 N/mmu00a0Rear:Two-way adjustableu00a0(independent compression and rebound adjustment)Spring preload adjusterSpring rate 240 N/mmFitment: POU MR30991 -u00a0911 GT3 Cup 3.8 / 4.0 (2012-19')make-porsche,make-porsche-model-911,make-porsche-model-911-chassis-991--2012-2016-,make-porsche-model-911-chassis-991--2012-2016--submodel-gt3-cup-mr,make-porsche-model-911-chassis-991--2012-2016--submodel-gt3-cup,make-porsche-model-911-chassis-991-2--2017-2019-,make-porsche-model-911-chassis-991-2--2017-2019--submodel-gt3-cup-mr,make-porsche-model-911-chassis-991-2--2017-2019--submodel-gt3-cup 4853856370711 4853856370711_33018155368471 Öhlins TTX-PRO Coilover System for Porsche 981 Cayman GT4 POU MR10 https://hinzmotorsport.com/products/ohlins-ttx-pro-coilover-system-for-porsche-981-cayman-gt4 Ohlins https://cdn.shopify.com/s/files/1/0045/1179/3186/products/981gt4ttxpro1.jpg?v=1610660451 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 24494 g 0 No 8,690.00 u00d6hlinsu00a0TTX PRO Coiloversu00a0The u00d6hlins TTX-Pro range of suspension systems have been developed for discerning club level racers and track day aficionados looking to utilize identical technology as the pros use to maximize performance. The dampers are carefully chosen for each application from u00d6hlins professional TTX motorsport range and adapted to suit road-going cars where the focus is on track use. u00d6hlins TTX dampers are pressure balanced at every clicker setting without the need for excessive nitrogen pressure, resulting in a broad range of adjustability without cavitation.u00a0The u00d6hlins TTX Motorsport Kits feature the famous TTX (Twin-Tube) technology. This particular kit has been custom made for the Porsche Cayman GT4. It offers a unique combination of a 46mm, two-way adjusted, through-rod, and lightweight McPherson strut for the front and a 36mm rear-mounted TTX shock that will completely transform your car.The u00d6hlins TTX 46 and TTX 36 shock absorbers are developed fromu00a0u00d6hlins participation in GT and Touring car racing. That givesu00a0u00d6hlins Clubsports kits a massive advantage. They are solely focused on providing the car with the best possible condition to set fast lap times without losing control. A fast vehicle also needs to give the driver a sense of safety, comfort, and performance and the TTX system does exactly that.On the race track, this all translates to faster lap times. With that said, you are only a few clicks away from a comfortable street setting when driving to and from the track, or as a daily driver. The two-way adjustability of the shocks allows you to fine-tune the handling at each track you visit or the tires you run.The u00d6hlinsu00a0team has extensively tested a wide variety ofu00a0settings to find the perfect setup for an uncompromised coilover. With that, we recommend the listed spring rate that comes with these dampers (100 N/mm Front, 120 N/mm Rear).They are made out of light-weight aluminum and exceed ISO 9227 standards for corrosion and have a 2-year limited warranty.General FeaturesTTX TechnologyHeight adjustableu00a0RebuildableCorrosion salt spray tested (ISO 9227)2-year limited warrantyFront:Two-way adjustableSpring preload adjusterApprox.u00a020 mm lower than standard with recommended setupMain Spring rate 100 N/mmu00a0Helper Spring rate 20 N/mmu00a0Use with original top mountsRear:Two-way adjustableSpring preload adjusterApprox.u00a020 mm lower than standard with recommended setupMain Spring rate 120 N/mmHelper Spring rate 20 N/mmUse with original top mountsThe u00d6hlins EDC Cancellation Kitu00a0(35020-13) for Road and Track deactivates dash lights and error codes when electronically adjustable OEM suspension is replaced with a mechanical system. The cancellation kit is plugged into the original suspension controls. No further programming is needed. *Only needed for vehicles equipped with PASM*Fitment: POU MR10981 - Cayman GT4 3.8 (2016-17')make-porsche,make-porsche-model-cayman,make-porsche-model-cayman-chassis-981--2014-2016-,make-porsche-model-cayman-chassis-981--2014-2016--submodel-gt4--3-8l- 4853856370711 4853856370711_33018155401239 Öhlins TTX-PRO Coilover System for Porsche 981 Cayman GT4 POU MR10 + 35020-13 https://hinzmotorsport.com/products/ohlins-ttx-pro-coilover-system-for-porsche-981-cayman-gt4 Ohlins https://cdn.shopify.com/s/files/1/0045/1179/3186/products/981gt4ttxpro1.jpg?v=1610660451 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 24494 g 0 Yes - (35020-13) 9,370.00 u00d6hlinsu00a0TTX PRO Coiloversu00a0The u00d6hlins TTX-Pro range of suspension systems have been developed for discerning club level racers and track day aficionados looking to utilize identical technology as the pros use to maximize performance. The dampers are carefully chosen for each application from u00d6hlins professional TTX motorsport range and adapted to suit road-going cars where the focus is on track use. u00d6hlins TTX dampers are pressure balanced at every clicker setting without the need for excessive nitrogen pressure, resulting in a broad range of adjustability without cavitation.u00a0The u00d6hlins TTX Motorsport Kits feature the famous TTX (Twin-Tube) technology. This particular kit has been custom made for the Porsche Cayman GT4. It offers a unique combination of a 46mm, two-way adjusted, through-rod, and lightweight McPherson strut for the front and a 36mm rear-mounted TTX shock that will completely transform your car.The u00d6hlins TTX 46 and TTX 36 shock absorbers are developed fromu00a0u00d6hlins participation in GT and Touring car racing. That givesu00a0u00d6hlins Clubsports kits a massive advantage. They are solely focused on providing the car with the best possible condition to set fast lap times without losing control. A fast vehicle also needs to give the driver a sense of safety, comfort, and performance and the TTX system does exactly that.On the race track, this all translates to faster lap times. With that said, you are only a few clicks away from a comfortable street setting when driving to and from the track, or as a daily driver. The two-way adjustability of the shocks allows you to fine-tune the handling at each track you visit or the tires you run.The u00d6hlinsu00a0team has extensively tested a wide variety ofu00a0settings to find the perfect setup for an uncompromised coilover. With that, we recommend the listed spring rate that comes with these dampers (100 N/mm Front, 120 N/mm Rear).They are made out of light-weight aluminum and exceed ISO 9227 standards for corrosion and have a 2-year limited warranty.General FeaturesTTX TechnologyHeight adjustableu00a0RebuildableCorrosion salt spray tested (ISO 9227)2-year limited warrantyFront:Two-way adjustableSpring preload adjusterApprox.u00a020 mm lower than standard with recommended setupMain Spring rate 100 N/mmu00a0Helper Spring rate 20 N/mmu00a0Use with original top mountsRear:Two-way adjustableSpring preload adjusterApprox.u00a020 mm lower than standard with recommended setupMain Spring rate 120 N/mmHelper Spring rate 20 N/mmUse with original top mountsThe u00d6hlins EDC Cancellation Kitu00a0(35020-13) for Road and Track deactivates dash lights and error codes when electronically adjustable OEM suspension is replaced with a mechanical system. The cancellation kit is plugged into the original suspension controls. No further programming is needed. *Only needed for vehicles equipped with PASM*Fitment: POU MR10981 - Cayman GT4 3.8 (2016-17')make-porsche,make-porsche-model-cayman,make-porsche-model-cayman-chassis-981--2014-2016-,make-porsche-model-cayman-chassis-981--2014-2016--submodel-gt4--3-8l- 4853815050263 4853815050263_33018201341975 Öhlins TTX-PRO Coilover System for Porsche 981 Cayman GT4 Clubsport POU MR11 https://hinzmotorsport.com/products/ohlins-ttx-pro-coilover-system-for-porsche-981-cayman-gt4-clubsport Ohlins https://cdn.shopify.com/s/files/1/0045/1179/3186/products/981gt4ttxpro1_22b41757-0a7b-401a-8ad9-37d95c536a99.jpg?v=1610660645 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 24494 g 0 Default Title 8,690.00 u00d6hlinsu00a0TTX PRO Coiloversu00a0The u00d6hlins TTX-Pro range of suspension systems have been developed for discerning club level racers and track day aficionados looking to utilize identical technology as the pros use to maximize performance.u00a0u00d6hlins TTX dampers are pressure balanced at every clicker setting without the need for excessive nitrogen pressure, resulting in a broad range of adjustability without cavitation.u00a0The u00d6hlins TTX Motorsport Kits feature the famous TTX (Twin-Tube) technology. This particular kit has been custom made for the Porsche Cayman GT4 Clubsport. It offers a unique combination of a 46mm, two-way adjusted, through-rod, and lightweight McPherson strut for the front and a 36mm rear-mounted TTX shock that will completely transform your car.The u00d6hlins TTX 46 and TTX 36 shock absorbers are developed fromu00a0u00d6hlins participation in GT and Touring car racing. That givesu00a0u00d6hlins Clubsports kits a massive advantage. They are solely focused on providing the car with the best possible condition to set fast lap times without losing control. A fast vehicle also needs to give the driver a sense of safety, confidence, and performance and the TTX system does exactly that.On the race track, this all translates to faster lap times. The two-way adjustability of the shocks allows you to fine-tune the handling at each track you visit or the tires you run.The u00d6hlinsu00a0team has extensively tested a wide variety ofu00a0settings to find the perfect setup for an uncompromised coilover. With that, we recommend the listed spring rate that comes with these dampers (120 N/mm Front, 140 N/mm Rear).They are made out of light-weight aluminum and exceed ISO 9227 standards for corrosion and have a 2-year limited warranty.Highlighted FeaturesTTX TechnologyDyno Matched for consistent handlingHeight adjustableu00a0RebuildableCorrosion salt spray tested (ISO 9227)2-year limited warrantyFront:Two-way adjustableu00a0 (independent compression and rebound adjustment)Spring preload adjusterApprox.u00a015 mm lower than standard with recommended setupMain Spring rate 120 N/mmu00a0Helper Spring rate 20 N/mmu00a0Use with original top mountsRear:Two-way adjustableu00a0(independent compression and rebound adjustment)Spring preload adjusterApprox.u00a015 mm lower than standard with recommended setupMain Spring rate 140 N/mmHelper Spring rate 20 N/mmUse with original top mountsFitment: POU MR11981 - Cayman GT4 3.8 Clubsport (2016-17')make-porsche,make-porsche-model-cayman,make-porsche-model-cayman-chassis-981--2014-2016-,make-porsche-model-cayman-chassis-981--2014-2016--submodel-gt4-clubsport--3-8l-,make-porsche-model-cayman-chassis-981--2014-2016--submodel-gt4-clubsport-mr--3-8l- 4853809348631 4853809348631_33018031308823 Öhlins Road & Track Coilover Kit for Porsche 911 964 Carrera/4/RS/Turbo/S POR GN01 https://hinzmotorsport.com/products/ohlins-road-track-coilover-kit-for-porsche-911-964-carrera-4-rs-turbo-s Ohlins https://cdn.shopify.com/s/files/1/0045/1179/3186/products/ohlins993R_T1_76e7ad3d-1bd5-4395-869d-af5a580080f1.jpg?v=1610652061 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 22680 g 0 Default Title 6,190.00 u00d6hlins Road & Track Coiloversu00a0If you are looking for the highest quality true dual-purpose coilover for both street and track use, look no further than theu00a0u00d6hlinsu00a0Road & Track coilover.The u00d6hlins Road & Track Coilover suspension system has beenu00a0designed for those who are looking for ultimate handling performance without sacrificing daily comfort. Until now, there were compromises when seeking a proper dual-purpose coilover suitable for both street and track duty. The Road & Track coilover has eliminated those compromises with easy adjustability and proper damping and spring selection.When you arrive at the track, just turn the golden knob clockwise to change the stiffness of the shock to the race setting. Adjusting the shock to race mode changes all four areas of the damper; low and high-speed compression and rebound damping.The u00d6hlinsu00a0Road & Track team has extensively tested a wide variety of springs to find the perfect setup for an uncompromised dual-purpose coilover. With that, we recommend the listed spring rate that comes with these dampers (50N/mm Front, 90N/mm Rear).They are made out of light-weight aluminum and exceed ISO 9227 standards for corrosion and have a 2-year limited warranty.*All fitments are shown below*General FeaturesDamping Adjustable (20+ available clicks of adjustment)DFV technology (Dual Flow Valve)Adjustable Front CamberHeight adjustableRebuildableCorrosion salt spray tested (ISO 9227)2-year limited warrantyIncludes springs and top mountsFront:Compression and rebound damping with one adjusterSpring preload adjusterHeight adjustment range -15/+15mmSpring rate 50 N/mmAluminum top mounts with adjustable camberRear:Compression and rebound damping with one adjusterSpring preload adjusterHeight adjustment range -15/+15mmSpring rate 90 N/mmAluminum top mounts (not adjustable)u00d6hlins Porscheu00a0964 Fitment:u00a0POR GN01964 - Carrera 2 (1990-94')964 - Carrera 4 (1989-94')964 - RS / RS America (1992-94')964 -u00a0Turbo / Turbo S (1991-94')make-porsche,make-porsche-model-911,make-porsche-model-911-chassis-964--1989-1994-,make-porsche-model-911-chassis-964--1989-1994--submodel-carrera-2,make-porsche-model-911-chassis-964--1989-1994--submodel-carrera-4,make-porsche-model-911-chassis-964--1989-1994--submodel-carrera-rs,make-porsche-model-911-chassis-964--1989-1994--submodel-turbo--3-3l-,make-porsche-model-911-chassis-964--1989-1994--submodel-turbo--3-6l- 4853473116183 4853473116183_33016985649175 Öhlins Road & Track Coilover Kit for Porsche 911 993 C2/C4/S/GT2/Turbo POR GP01 https://hinzmotorsport.com/products/ohlins-road-track-coilover-kit-for-porsche-911-993-c2-c4-s-turbo Ohlins https://cdn.shopify.com/s/files/1/0045/1179/3186/products/ohlins993R_T1.jpg?v=1610651829 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 22680 g 0 Default Title 6,490.00 u00d6hlins Road & Track Coiloversu00a0If you are looking for the highest quality true dual-purpose coilover for both street and track use, look no further than theu00a0u00d6hlinsu00a0Road & Track coilover.The u00d6hlins Road & Track Coilover suspension system has beenu00a0designed for those who are looking for ultimate handling performance without sacrificing daily comfort. Until now, there were compromises when seeking a proper dual-purpose coilover suitable for both street and track duty. The Road & Track coilover has eliminated those compromises with easy adjustability and proper damping and spring selection.When you arrive at the track, just turn the golden knob clockwise to change the stiffness of the shock to the race setting. Adjusting the shock to race mode changes all four areas of the damper; low and high-speed compression and rebound damping.The u00d6hlinsu00a0Road & Track team has extensively tested a wide variety of springs to find the perfect setup for an uncompromised dual-purpose coilover. With that, we recommend the listed spring rate that comes with these dampers (60N/mm Front, 100N/mm Rear).They are made out of light-weight aluminum and exceed ISO 9227 standards for corrosion and have a 2-year limited warranty.*All fitments are shown below*General FeaturesDFV technology (Dual Flow Valve)Temperature compensation valveAdjustable Front CamberHeight adjustableRebuildableCorrosion salt spray tested (ISO 9227)2-year limited warrantyFront:Compression and rebound damping with one adjuster (20 clicks of adjustment)Spring preload adjusterTarget ride height is 15mm lower than stockSpring rate 60 N/mmAluminum spherical bearing top mounts with adjustable camberRear:Compression and rebound damping with one adjusterSpring preload adjusterTarget ride height is 15mm lower than stockSpring rate 100 N/mmAluminum spherical bearing top mounts (not adjustable)*Special Installation Notes*Porsche 911 (993) 2WD 1996-1998 models will require installing OEM Porsche anti-roll bar links, these are not included:Anti-roll bar link left: 993 343 069 00Anti-roll bar link right: 993 343 070 00Porsche 911 (993) AWD 1993-1998 will re-use the original anti-roll bar linkagesu00d6hlins Porscheu00a0993 Fitment:u00a0POR GP01993 - Carrera 2/S (1995-98')993 - Carrera 4/S (1995-98')993 - GT2 (1995-98')993 -u00a0Turbo/S (1995-98')make-porsche,make-porsche-model-911,make-porsche-model-911-chassis-993--1994-1998-,make-porsche-model-911-chassis-993--1994-1998--submodel-carrera--quot-turbo-look-quot---3-6l-,make-porsche-model-911-chassis-993--1994-1998--submodel-carrera---carrera-4--3-6l-,make-porsche-model-911-chassis-993--1994-1998--submodel-carrera-4--quot-turbo-look-quot---3-6l-,make-porsche-model-911-chassis-993--1994-1998--submodel-carrera-rs--3-8l-,make-porsche-model-911-chassis-993--1994-1998--submodel-carrera-s---carrera-4s--3-8l-,make-porsche-model-911-chassis-993--1994-1998--submodel-gt2,make-porsche-model-911-chassis-993--1994-1998--submodel-rsr,make-porsche-model-911-chassis-993--1994-1998--submodel-turbo--3-6l-,make-porsche-model-911-chassis-993--1994-1998--submodel-turbo-s--3-6l- 4853455716375 4853455716375_33016930369559 Öhlins Road & Track Coilover Kit for Porsche 911 996 GT2/GT3/RS POS MI10 https://hinzmotorsport.com/products/ohlins-road-track-coilover-kit-for-porsche-911-996-gt2-gt3 Ohlins https://cdn.shopify.com/s/files/1/0045/1179/3186/products/OhlinsRoad_Track11_3a5d5b1d-8bf0-4ddf-88a9-b53c0a9dda0c.jpg?v=1610571991 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 21909 g 3 Default Title 3,190.00 u00d6hlins Road & Track Coiloversu00a0If you are looking for the highest quality true dual-purpose coilover for both street and track use, look no further than theu00a0u00d6hlinsu00a0Road & Track coilover.The u00d6hlins Road & Track Coilover suspension system has beenu00a0designed for those who are looking for ultimate handling performance without sacrificing daily comfort. Until now, there were compromises when seeking a proper dual-purpose coilover suitable for both street and track duty. The Road & Track coilover has eliminated those compromises with easy adjustability and proper damping and spring selection.When you arrive at the track, just turn the golden knob clockwise to change the stiffness of the shock to the race setting. Adjusting the shock to race mode changes all four areas of the damper; low and high-speed compression and rebound damping.The u00d6hlinsu00a0Road & Track team has extensively tested a wide variety of springs to find the perfect setup for an uncompromised dual-purpose coilover. With that, we recommend the listed spring rate that comes with these dampers (70N/mm Front, 80N/mm Rear).They are made out of light-weight aluminum and exceed ISO 9227 standards for corrosion and have a 2-year limited warranty.*All fitments are shown below*General FeaturesDFV technology (Dual Flow Valve)Temperature compensation valveHeight adjustableRebuildableCorrosion salt spray tested (ISO 9227)2-year limited warrantyFront:Compression and rebound damping with one adjusterSpring preload adjusterTarget ride height is 20mm lower than stockSpring rate 70 N/mmDustcoversUse with original top mountsRear:Compression and rebound damping with one adjusterSpring preload adjusterTarget ride height is 20mm lower than stockSpring rate 140 N/mmDustcoversUse with original top mountsu00d6hlins Porscheu00a0996 Fitment:u00a0POS MI10996 -u00a0GT3 (2002-04')996 -u00a0GT3u00a0RSu00a0(2002-04')996 -u00a0GT2u00a0(2002-05')make-porsche,make-porsche-model-911,make-porsche-model-911-chassis-996--1999-2004-,make-porsche-model-911-chassis-996--1999-2004--submodel-gt2--2002-05-,make-porsche-model-911-chassis-996--1999-2004--submodel-gt3--1999-01-,make-porsche-model-911-chassis-996--1999-2004--submodel-gt3--2002-04-,make-porsche-model-911-chassis-996--1999-2004--submodel-gt3-rs 4853451194391 4853451194391_33016905990167 Öhlins Road & Track Coilover Kit for Porsche 911 997 Carrera / S POS MI20 https://hinzmotorsport.com/products/ohlins-road-track-coilover-kit-for-porsche-911-997-carrera-s Ohlins https://cdn.shopify.com/s/files/1/0045/1179/3186/products/ohlinsR_T997carrera4.jpg?v=1610570329 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 22271 g 7 No Thanks 2,890.00 u00d6hlins Road & Track Coiloversu00a0If you are looking for the highest quality true dual-purpose coilover for both street and track use, look no further than theu00a0u00d6hlinsu00a0Road & Track coilover.The u00d6hlins Road & Track Coilover suspension system has beenu00a0designed for those who are looking for ultimate handling performance without sacrificing daily comfort. Until now, there were compromises when seeking a proper dual-purpose coilover suitable for both street and track duty. The Road & Track coilover has eliminated those compromises with easy adjustability and proper damping and spring selection.When you arrive at the track, just turn the golden knob clockwise to change the stiffness of the shock to the race setting. Adjusting the shock to race mode changes all four areas of the damper; low and high-speed compression and rebound damping.The u00d6hlinsu00a0Road & Track team has extensively tested a wide variety of springs to find the perfect setup for an uncompromised dual-purpose coilover. With that, we recommend the listed spring rate that comes with these dampers (60N/mm Front, 120N/mm Rear).They are made out of light-weight aluminum and exceed ISO 9227 standards for corrosion and have a 2-year limited warranty.*All fitments are shown below*General FeaturesDFV technology (Dual Flow Valve)Height adjustableRebuildableCorrosion salt spray tested (ISO 9227)2-year limited warrantyFront:Compression and rebound damping with one adjusterSpring preload adjusterApprox. 25 mm lower than standard with recommended setupSpring rate 60 N/mmDustcoversRear:Compression and rebound damping with one adjusterSpring preload adjusterApprox. 25 mm lower than standard with recommended setupSpring rate 120 N/mmDustcoversTheu00a0u00d6hlins EDC Cancellation Kit (35020-09 (Cab.) / 35020-10 (Coupe))u00a0for Road and Track deactivates dash lights and error codes when electronically adjustable OEM suspension is replaced with a mechanical system. The cancellation kit is plugged into the original suspension controls. No further programming is needed. *For PASM equipped vehicles only*u00d6hlins Porscheu00a0997 Fitment: POS MI20997 -u00a0Carrera (2005-08')997 - Carrera S (2005-08')997.2 - Carrera (2009-12')997.2 - Carrera Su00a0(2009-12')make-porsche,make-porsche-model-911,make-porsche-model-911-chassis-997--2005-2008-,make-porsche-model-911-chassis-997--2005-2008--submodel-carrera---carrera-4--3-6l-,make-porsche-model-911-chassis-997--2005-2008--submodel-carrera-s---carrera-4s--3-8l-,make-porsche-model-911-chassis-997-2--2009-2012-,make-porsche-model-911-chassis-997-2--2009-2012--submodel-carrera---carrera-4--3-6l-,make-porsche-model-911-chassis-997-2--2009-2012--submodel-carrera-s---carrera-4s--3-8l- 4853451194391 4853451194391_33016906022935 Öhlins Road & Track Coilover Kit for Porsche 911 997 Carrera / S POS MI20 + 35020-10 https://hinzmotorsport.com/products/ohlins-road-track-coilover-kit-for-porsche-911-997-carrera-s Ohlins https://cdn.shopify.com/s/files/1/0045/1179/3186/products/ohlinsR_T997carrera4.jpg?v=1610570329 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 22271 g 3 Yes - For Coupe (35020-10) 3,400.00 u00d6hlins Road & Track Coiloversu00a0If you are looking for the highest quality true dual-purpose coilover for both street and track use, look no further than theu00a0u00d6hlinsu00a0Road & Track coilover.The u00d6hlins Road & Track Coilover suspension system has beenu00a0designed for those who are looking for ultimate handling performance without sacrificing daily comfort. Until now, there were compromises when seeking a proper dual-purpose coilover suitable for both street and track duty. The Road & Track coilover has eliminated those compromises with easy adjustability and proper damping and spring selection.When you arrive at the track, just turn the golden knob clockwise to change the stiffness of the shock to the race setting. Adjusting the shock to race mode changes all four areas of the damper; low and high-speed compression and rebound damping.The u00d6hlinsu00a0Road & Track team has extensively tested a wide variety of springs to find the perfect setup for an uncompromised dual-purpose coilover. With that, we recommend the listed spring rate that comes with these dampers (60N/mm Front, 120N/mm Rear).They are made out of light-weight aluminum and exceed ISO 9227 standards for corrosion and have a 2-year limited warranty.*All fitments are shown below*General FeaturesDFV technology (Dual Flow Valve)Height adjustableRebuildableCorrosion salt spray tested (ISO 9227)2-year limited warrantyFront:Compression and rebound damping with one adjusterSpring preload adjusterApprox. 25 mm lower than standard with recommended setupSpring rate 60 N/mmDustcoversRear:Compression and rebound damping with one adjusterSpring preload adjusterApprox. 25 mm lower than standard with recommended setupSpring rate 120 N/mmDustcoversTheu00a0u00d6hlins EDC Cancellation Kit (35020-09 (Cab.) / 35020-10 (Coupe))u00a0for Road and Track deactivates dash lights and error codes when electronically adjustable OEM suspension is replaced with a mechanical system. The cancellation kit is plugged into the original suspension controls. No further programming is needed. *For PASM equipped vehicles only*u00d6hlins Porscheu00a0997 Fitment: POS MI20997 -u00a0Carrera (2005-08')997 - Carrera S (2005-08')997.2 - Carrera (2009-12')997.2 - Carrera Su00a0(2009-12')make-porsche,make-porsche-model-911,make-porsche-model-911-chassis-997--2005-2008-,make-porsche-model-911-chassis-997--2005-2008--submodel-carrera---carrera-4--3-6l-,make-porsche-model-911-chassis-997--2005-2008--submodel-carrera-s---carrera-4s--3-8l-,make-porsche-model-911-chassis-997-2--2009-2012-,make-porsche-model-911-chassis-997-2--2009-2012--submodel-carrera---carrera-4--3-6l-,make-porsche-model-911-chassis-997-2--2009-2012--submodel-carrera-s---carrera-4s--3-8l- 4853451194391 4853451194391_33016924864535 Öhlins Road & Track Coilover Kit for Porsche 911 997 Carrera / S POS MI20 + 35020-09 https://hinzmotorsport.com/products/ohlins-road-track-coilover-kit-for-porsche-911-997-carrera-s Ohlins https://cdn.shopify.com/s/files/1/0045/1179/3186/products/ohlinsR_T997carrera4.jpg?v=1610570329 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 22271 g 1 Yes - For Cabriolet (35020-09) 3,400.00 u00d6hlins Road & Track Coiloversu00a0If you are looking for the highest quality true dual-purpose coilover for both street and track use, look no further than theu00a0u00d6hlinsu00a0Road & Track coilover.The u00d6hlins Road & Track Coilover suspension system has beenu00a0designed for those who are looking for ultimate handling performance without sacrificing daily comfort. Until now, there were compromises when seeking a proper dual-purpose coilover suitable for both street and track duty. The Road & Track coilover has eliminated those compromises with easy adjustability and proper damping and spring selection.When you arrive at the track, just turn the golden knob clockwise to change the stiffness of the shock to the race setting. Adjusting the shock to race mode changes all four areas of the damper; low and high-speed compression and rebound damping.The u00d6hlinsu00a0Road & Track team has extensively tested a wide variety of springs to find the perfect setup for an uncompromised dual-purpose coilover. With that, we recommend the listed spring rate that comes with these dampers (60N/mm Front, 120N/mm Rear).They are made out of light-weight aluminum and exceed ISO 9227 standards for corrosion and have a 2-year limited warranty.*All fitments are shown below*General FeaturesDFV technology (Dual Flow Valve)Height adjustableRebuildableCorrosion salt spray tested (ISO 9227)2-year limited warrantyFront:Compression and rebound damping with one adjusterSpring preload adjusterApprox. 25 mm lower than standard with recommended setupSpring rate 60 N/mmDustcoversRear:Compression and rebound damping with one adjusterSpring preload adjusterApprox. 25 mm lower than standard with recommended setupSpring rate 120 N/mmDustcoversTheu00a0u00d6hlins EDC Cancellation Kit (35020-09 (Cab.) / 35020-10 (Coupe))u00a0for Road and Track deactivates dash lights and error codes when electronically adjustable OEM suspension is replaced with a mechanical system. The cancellation kit is plugged into the original suspension controls. No further programming is needed. *For PASM equipped vehicles only*u00d6hlins Porscheu00a0997 Fitment: POS MI20997 -u00a0Carrera (2005-08')997 - Carrera S (2005-08')997.2 - Carrera (2009-12')997.2 - Carrera Su00a0(2009-12')make-porsche,make-porsche-model-911,make-porsche-model-911-chassis-997--2005-2008-,make-porsche-model-911-chassis-997--2005-2008--submodel-carrera---carrera-4--3-6l-,make-porsche-model-911-chassis-997--2005-2008--submodel-carrera-s---carrera-4s--3-8l-,make-porsche-model-911-chassis-997-2--2009-2012-,make-porsche-model-911-chassis-997-2--2009-2012--submodel-carrera---carrera-4--3-6l-,make-porsche-model-911-chassis-997-2--2009-2012--submodel-carrera-s---carrera-4s--3-8l- 4853445820439 4853445820439_33016868732951 Öhlins Road & Track Coilover Kit for Porsche 911 991 Carrera/S POU MP70 https://hinzmotorsport.com/products/ohlins-road-track-coilover-kit-for-porsche-911-991-carrera-s Ohlins https://cdn.shopify.com/s/files/1/0045/1179/3186/products/OhlinsRoad_Track991carrera5_afe993e9-6fad-41e7-87fe-eb2d67536d06.jpg?v=1610568048 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 24131 g 1 No 3,190.00 u00d6hlins Road & Track Coiloversu00a0If you are looking for the highest quality true dual-purpose coilover for both street and track use, look no further than theu00a0u00d6hlinsu00a0Road & Track coilover.The u00d6hlins Road & Track Coilover suspension system has beenu00a0designed for those who are looking for ultimate handling performance without sacrificing daily comfort. Until now, there were compromises when seeking a proper dual-purpose coilover suitable for both street and track duty. The Road & Track coilover has eliminated those compromises with easy adjustability and proper damping and spring selection.When you arrive at the track, just turn the golden knob clockwise to change the stiffness of the shock to the race setting. Adjusting the shock to race mode changes all four areas of the damper; low and high-speed compression and rebound damping.The u00d6hlinsu00a0Road & Track team has extensively tested a wide variety of springs to find the perfect setup for an uncompromised dual-purpose coilover. With that, we recommend the listed spring rate that comes with these dampers (70 N/mm Front, 120 N/mm Rear).They are made out of light-weight aluminum and exceed ISO 9227 standards for corrosion and have a 2-year limited warranty.*All fitments are shown below*General FeaturesDFV technology (Dual Flow Valve)Height adjustableRebuildableCorrosion salt spray tested (ISO 9227)2-year limited warrantyFront:Compression and rebound damping with one adjusterSpring preload adjusterApprox.u00a010u00a0mm lower than standard with recommended setupSpring rate 70 N/mmDustcoversUse with original top mountsRear:Compression and rebound damping with one adjusterSpring preload adjusterApprox.u00a010 mm lower than standard with recommended setupSpring rate 120 N/mmDustcoversUse with original top mountsu00d6hlins Porscheu00a0991 Fitment: POU MP70991 - Carrera / Carrera S (2012-16')991.2 - Carrera / Carrera S (2017-19')make-porsche,make-porsche-model-911,make-porsche-model-911-chassis-991--2012-2016-,make-porsche-model-911-chassis-991--2012-2016--submodel-carrera---carrera-4--3-4l-,make-porsche-model-911-chassis-991--2012-2016--submodel-carrera-gts---carrera-4gts--3-8l-,make-porsche-model-911-chassis-991--2012-2016--submodel-carrera-s---carrera-4s--3-8l-,make-porsche-model-911-chassis-991-2--2017-2019-,make-porsche-model-911-chassis-991-2--2017-2019--submodel-carrera---carrera-4--3-0l-,make-porsche-model-911-chassis-991-2--2017-2019--submodel-carrera---carrera-4--3-4l-,make-porsche-model-911-chassis-991-2--2017-2019--submodel-carrera-gts---carrera-4gts--3-0l-,make-porsche-model-911-chassis-991-2--2017-2019--submodel-carrera-s---carrera-4s--3-0l-,make-porsche-model-911-chassis-991-2--2017-2019--submodel-carrera-s---carrera-4s--3-8l- 4853445820439 4853445820439_33016868765719 Öhlins Road & Track Coilover Kit for Porsche 911 991 Carrera/S POU MP70 + 35020-07 https://hinzmotorsport.com/products/ohlins-road-track-coilover-kit-for-porsche-911-991-carrera-s Ohlins https://cdn.shopify.com/s/files/1/0045/1179/3186/products/OhlinsRoad_Track991carrera5_afe993e9-6fad-41e7-87fe-eb2d67536d06.jpg?v=1610568048 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 24131 g 1 Yes - (35020-07) 3,700.00 u00d6hlins Road & Track Coiloversu00a0If you are looking for the highest quality true dual-purpose coilover for both street and track use, look no further than theu00a0u00d6hlinsu00a0Road & Track coilover.The u00d6hlins Road & Track Coilover suspension system has beenu00a0designed for those who are looking for ultimate handling performance without sacrificing daily comfort. Until now, there were compromises when seeking a proper dual-purpose coilover suitable for both street and track duty. The Road & Track coilover has eliminated those compromises with easy adjustability and proper damping and spring selection.When you arrive at the track, just turn the golden knob clockwise to change the stiffness of the shock to the race setting. Adjusting the shock to race mode changes all four areas of the damper; low and high-speed compression and rebound damping.The u00d6hlinsu00a0Road & Track team has extensively tested a wide variety of springs to find the perfect setup for an uncompromised dual-purpose coilover. With that, we recommend the listed spring rate that comes with these dampers (70 N/mm Front, 120 N/mm Rear).They are made out of light-weight aluminum and exceed ISO 9227 standards for corrosion and have a 2-year limited warranty.*All fitments are shown below*General FeaturesDFV technology (Dual Flow Valve)Height adjustableRebuildableCorrosion salt spray tested (ISO 9227)2-year limited warrantyFront:Compression and rebound damping with one adjusterSpring preload adjusterApprox.u00a010u00a0mm lower than standard with recommended setupSpring rate 70 N/mmDustcoversUse with original top mountsRear:Compression and rebound damping with one adjusterSpring preload adjusterApprox.u00a010 mm lower than standard with recommended setupSpring rate 120 N/mmDustcoversUse with original top mountsu00d6hlins Porscheu00a0991 Fitment: POU MP70991 - Carrera / Carrera S (2012-16')991.2 - Carrera / Carrera S (2017-19')make-porsche,make-porsche-model-911,make-porsche-model-911-chassis-991--2012-2016-,make-porsche-model-911-chassis-991--2012-2016--submodel-carrera---carrera-4--3-4l-,make-porsche-model-911-chassis-991--2012-2016--submodel-carrera-gts---carrera-4gts--3-8l-,make-porsche-model-911-chassis-991--2012-2016--submodel-carrera-s---carrera-4s--3-8l-,make-porsche-model-911-chassis-991-2--2017-2019-,make-porsche-model-911-chassis-991-2--2017-2019--submodel-carrera---carrera-4--3-0l-,make-porsche-model-911-chassis-991-2--2017-2019--submodel-carrera---carrera-4--3-4l-,make-porsche-model-911-chassis-991-2--2017-2019--submodel-carrera-gts---carrera-4gts--3-0l-,make-porsche-model-911-chassis-991-2--2017-2019--submodel-carrera-s---carrera-4s--3-0l-,make-porsche-model-911-chassis-991-2--2017-2019--submodel-carrera-s---carrera-4s--3-8l- 4853432975383 4853432975383_33016843993111 Öhlins Road & Track Coilover Kit for Porsche 986/987 Boxster/Cayman Models POU MR80 https://hinzmotorsport.com/products/ohlins-road-track-coilover-kit-for-porsche-986-987-boxster-cayman-models Ohlins https://cdn.shopify.com/s/files/1/0045/1179/3186/products/ohlins986_987road_Track1.jpg?v=1610565043 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 24358 g 0 Default Title 2,995.00 u00d6hlins Road & Track Coiloversu00a0If you are looking for the highest quality true dual-purpose coilover for both street and track use, look no further than theu00a0u00d6hlinsu00a0Road & Track coilover.The u00d6hlins Road & Track Coilover suspension system has beenu00a0designed for those who are looking for ultimate handling performance without sacrificing daily comfort. Until now, there were compromises when seeking a proper dual-purpose coilover suitable for both street and track duty. The Road & Track coilover has eliminated those compromises with easy adjustability and proper damping and spring selection.When you arrive at the track, just turn the golden knob clockwise to change the stiffness of the shock to the race setting. Adjusting the shock to race mode changes all four areas of the damper; low and high-speed compression and rebound damping.The u00d6hlinsu00a0Road & Track team has extensively tested a wide variety of springs to find the perfect setup for an uncompromised dual-purpose coilover. With that, we recommend the listed spring rate that comes with these dampers (70N/mm Front, 80N/mm Rear).They are made out of light-weight aluminum and exceed ISO 9227 standards for corrosion and have a 2-year limited warranty.*All fitments are shown below*General FeaturesDFV technology (Dual Flow Valve)Height adjustableRebuildableCorrosion salt spray tested (ISO 9227)2-year limited warrantyFront:Compression and rebound damping with one adjusterSpring preload adjusterApprox. 20 mm lower than standard with recommended setupSpring rate 70 N/mmDustcoversRear:Compression and rebound damping with one adjusterSpring preload adjusterApprox. 20 mm lower than standard with recommended setupSpring rate 80 N/mmDustcoversFitment: POU MR80987 - Cayman 2.7 (2005-08')987 - Cayman S 3.4 (2005-08')987.2 - Cayman 2.9 (2009-12')987.2 - Cayman S 3.4 (2009-12')987.2 - Caymanu00a0R 3.4 (2009-12')986 -u00a0Boxster 2.5 (1997-04')986 -u00a0Boxster 2.7 (1997-04')986 -u00a0Boxster S 3.2 (1997-04')987 -u00a0Boxster 2.7 (2005-08')987 -u00a0Boxster 3.2 (2005-08')987 -u00a0Boxster S 3.4 (2005-08')987.2 -u00a0Boxster 2.9 (2009-12')987.2 -u00a0Boxster 3.4 (2009-12')987.2 - Spyder 3.4 (2009-12')make-porsche,make-porsche-model-boxster,make-porsche-model-boxster-chassis-986--1997-2004-,make-porsche-model-boxster-chassis-986--1997-2004--submodel-boxster--2-5l-,make-porsche-model-boxster-chassis-986--1997-2004--submodel-boxster--2-7l-,make-porsche-model-boxster-chassis-986--1997-2004--submodel-boxster-s--3-2l-,make-porsche-model-boxster-chassis-987--2005-2008-,make-porsche-model-boxster-chassis-987--2005-2008--submodel-boxster--2-7l-,make-porsche-model-boxster-chassis-987--2005-2008--submodel-boxster-s--3-2l-,make-porsche-model-boxster-chassis-987--2005-2008--submodel-boxster-s--3-4l-,make-porsche-model-boxster-chassis-987-2--2009-2012-,make-porsche-model-boxster-chassis-987-2--2009-2012--submodel-boxster--2-9l-,make-porsche-model-boxster-chassis-987-2--2009-2012--submodel-boxster-s--3-4l-,make-porsche-model-boxster-chassis-987-2--2009-2012--submodel-spyder--3-4l-,make-porsche-model-cayman,make-porsche-model-cayman-chassis-987--2005-2008-,make-porsche-model-cayman-chassis-987--2005-2008--submodel-cayman--2-7l-,make-porsche-model-cayman-chassis-987--2005-2008--submodel-cayman-s--3-4l-,make-porsche-model-cayman-chassis-987-2--2009-2012-,make-porsche-model-cayman-chassis-987-2--2009-2012--submodel-cayman--2-9l-,make-porsche-model-cayman-chassis-987-2--2009-2012--submodel-cayman-r--3-4l-,make-porsche-model-cayman-chassis-987-2--2009-2012--submodel-cayman-s--3-4l- 4853427503127 4853427503127_33016786878487 Öhlins Road & Track Coilover Kit for Porsche 981 Cayman GT4 POU MR90 https://hinzmotorsport.com/products/ohlins-road-track-coilover-kit-for-porsche-981-cayman-gt4 Ohlins https://cdn.shopify.com/s/files/1/0045/1179/3186/products/OhlinsRoad_Track11_2bd9c927-f0c2-417f-9b65-8b73efe1b725.jpg?v=1610562586 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 22680 g 1 No 3,595.00 u00d6hlins Road & Track Coiloversu00a0If you are looking for the highest quality true dual-purpose coilover for both street and track use, look no further than theu00a0u00d6hlinsu00a0Road & Track coilover.The u00d6hlins Road & Track Coilover suspension system has beenu00a0designed for those who are looking for ultimate handling performance without sacrificing daily comfort. Until now, there were compromises when seeking a proper dual-purpose coilover suitable for both street and track duty. The Road & Track coilover has eliminated those compromises with easy adjustability and proper damping and spring selection.When you arrive at the track, just turn the golden knob clockwise to change the stiffness of the shock to the race setting. Adjusting the shock to race mode changes all four areas of the damper; low and high-speed compression and rebound damping.The u00d6hlinsu00a0Road & Track team has extensively tested a wide variety of springs to find the perfect setup for an uncompromised dual-purpose coilover. With that, we recommend the listed spring rate that comes with these dampers (80 N/mm Front, 90 N/mm Rear).They are made out of light-weight aluminum and exceed ISO 9227 standards for corrosion and have a 2-year limited warranty.*All fitments are shown below*General FeaturesDFV technology (Dual Flow Valve)Height adjustableRebuildableCorrosion salt spray tested (ISO 9227)2-year limited warrantyFront:Compression and rebound damping with one adjusterSpring preload adjusterApprox. 10 mm lower than standard with recommended setupSpring rate 80 N/mmDustcoversUse with original top mountsRear:Compression and rebound damping with one adjusterSpring preload adjusterApprox. 10 mm lower than standard with recommended setupSpring rate 90 N/mmDustcoversUse with original top mountsThe u00d6hlins EDC Cancellation Kitu00a0(35020-13) for Road and Track deactivates dash lights and error codes when electronically adjustable OEM suspension is replaced with a mechanical system. The cancellation kit is plugged into the original suspension controls. No further programming is needed. *Only needed for vehicles equipped with PASM*Fitment: POU MR90981 - Cayman GT4 3.8 (2016-17')make-porsche,make-porsche-model-cayman,make-porsche-model-cayman-chassis-981--2014-2016-,make-porsche-model-cayman-chassis-981--2014-2016--submodel-gt4--3-8l- 4853427503127 4853427503127_33016786911255 Öhlins Road & Track Coilover Kit for Porsche 981 Cayman GT4 POU MR90 + 35020-13 https://hinzmotorsport.com/products/ohlins-road-track-coilover-kit-for-porsche-981-cayman-gt4 Ohlins https://cdn.shopify.com/s/files/1/0045/1179/3186/products/OhlinsRoad_Track11_2bd9c927-f0c2-417f-9b65-8b73efe1b725.jpg?v=1610562586 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 22680 g 1 Yes - (35020-13) 4,275.00 u00d6hlins Road & Track Coiloversu00a0If you are looking for the highest quality true dual-purpose coilover for both street and track use, look no further than theu00a0u00d6hlinsu00a0Road & Track coilover.The u00d6hlins Road & Track Coilover suspension system has beenu00a0designed for those who are looking for ultimate handling performance without sacrificing daily comfort. Until now, there were compromises when seeking a proper dual-purpose coilover suitable for both street and track duty. The Road & Track coilover has eliminated those compromises with easy adjustability and proper damping and spring selection.When you arrive at the track, just turn the golden knob clockwise to change the stiffness of the shock to the race setting. Adjusting the shock to race mode changes all four areas of the damper; low and high-speed compression and rebound damping.The u00d6hlinsu00a0Road & Track team has extensively tested a wide variety of springs to find the perfect setup for an uncompromised dual-purpose coilover. With that, we recommend the listed spring rate that comes with these dampers (80 N/mm Front, 90 N/mm Rear).They are made out of light-weight aluminum and exceed ISO 9227 standards for corrosion and have a 2-year limited warranty.*All fitments are shown below*General FeaturesDFV technology (Dual Flow Valve)Height adjustableRebuildableCorrosion salt spray tested (ISO 9227)2-year limited warrantyFront:Compression and rebound damping with one adjusterSpring preload adjusterApprox. 10 mm lower than standard with recommended setupSpring rate 80 N/mmDustcoversUse with original top mountsRear:Compression and rebound damping with one adjusterSpring preload adjusterApprox. 10 mm lower than standard with recommended setupSpring rate 90 N/mmDustcoversUse with original top mountsThe u00d6hlins EDC Cancellation Kitu00a0(35020-13) for Road and Track deactivates dash lights and error codes when electronically adjustable OEM suspension is replaced with a mechanical system. The cancellation kit is plugged into the original suspension controls. No further programming is needed. *Only needed for vehicles equipped with PASM*Fitment: POU MR90981 - Cayman GT4 3.8 (2016-17')make-porsche,make-porsche-model-cayman,make-porsche-model-cayman-chassis-981--2014-2016-,make-porsche-model-cayman-chassis-981--2014-2016--submodel-gt4--3-8l- 4853423669271 4853423669271_33016772001815 Öhlins Road & Track Coilover Kit for Porsche 911 991 Carrera 4/4S/Turbo/S POU MS00 https://hinzmotorsport.com/products/ohlins-road-track-coilover-kit-for-porsche-911-991-carrera-4-turbo Ohlins https://cdn.shopify.com/s/files/1/0045/1179/3186/products/OhlinsRoad_Track991carrera5.jpg?v=1610561848 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 24131 g 0 No 3,490.00 u00d6hlins Road & Track Coiloversu00a0If you are looking for the highest quality true dual-purpose coilover for both street and track use, look no further than theu00a0u00d6hlinsu00a0Road & Track coilover.The u00d6hlins Road & Track Coilover suspension system has beenu00a0designed for those who are looking for ultimate handling performance without sacrificing daily comfort. Until now, there were compromises when seeking a proper dual-purpose coilover suitable for both street and track duty. The Road & Track coilover has eliminated those compromises with easy adjustability and proper damping and spring selection.When you arrive at the track, just turn the golden knob clockwise to change the stiffness of the shock to the race setting. Adjusting the shock to race mode changes all four areas of the damper; low and high-speed compression and rebound damping.The u00d6hlinsu00a0Road & Track team has extensively tested a wide variety of springs to find the perfect setup for an uncompromised dual-purpose coilover. With that, we recommend the listed spring rate that comes with these dampers (70N/mm Front, 140N/mm Rear).They are made out of light-weight aluminum and exceed ISO 9227 standards for corrosion and have a 2-year limited warranty.*All fitments are shown below*General FeaturesDFV technology (Dual Flow Valve)Height adjustableRebuildableCorrosion salt spray tested (ISO 9227)2-year limited warrantyFront:McPherson strut, upside downCompression and rebound damping with one adjusterSpring preload adjusterApprox.u00a010u00a0mm lower than standard with recommended setupHeight adjustment rangeu00a020 mmu00a0Spring rate 70 N/mmDustcoversUse with original top mountsRear:Compression and rebound damping with one adjusterSpring preload adjusterApprox.u00a010 mm lower than standard with recommended setupHeight adjustment rangeu00a020 mmu00a0Spring rate 140 N/mmDustcoversUse with original top mountsu00d6hlins Porscheu00a0991 Fitment: POU MS00991 - Carrera 4 / Carrera 4S (2012-16')991 - Turbo / Turbo S (2012-16')991.2 - Carrera 4 / Carrera 4S (2017-19')991.2 - Turbo / Turbo S (2017-19')make-porsche,make-porsche-model-911,make-porsche-model-911-chassis-991--2012-2016-,make-porsche-model-911-chassis-991--2012-2016--submodel-carrera---carrera-4--3-4l-,make-porsche-model-911-chassis-991--2012-2016--submodel-carrera-s---carrera-4s--3-8l-,make-porsche-model-911-chassis-991--2012-2016--submodel-turbo-s,make-porsche-model-911-chassis-991--2012-2016--submodel-turbo,make-porsche-model-911-chassis-991-2--2017-2019-,make-porsche-model-911-chassis-991-2--2017-2019--submodel-carrera---carrera-4--3-0l-,make-porsche-model-911-chassis-991-2--2017-2019--submodel-carrera---carrera-4--3-4l-,make-porsche-model-911-chassis-991-2--2017-2019--submodel-carrera-s---carrera-4s--3-0l-,make-porsche-model-911-chassis-991-2--2017-2019--submodel-carrera-s---carrera-4s--3-8l-,make-porsche-model-911-chassis-991-2--2017-2019--submodel-turbo-s,make-porsche-model-911-chassis-991-2--2017-2019--submodel-turbo 4853423669271 4853423669271_33016772034583 Öhlins Road & Track Coilover Kit for Porsche 911 991 Carrera 4/4S/Turbo/S POU MS00 + 35020-07 https://hinzmotorsport.com/products/ohlins-road-track-coilover-kit-for-porsche-911-991-carrera-4-turbo Ohlins https://cdn.shopify.com/s/files/1/0045/1179/3186/products/OhlinsRoad_Track991carrera5.jpg?v=1610561848 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 24131 g 0 Yes - (35020-07) 4,000.00 u00d6hlins Road & Track Coiloversu00a0If you are looking for the highest quality true dual-purpose coilover for both street and track use, look no further than theu00a0u00d6hlinsu00a0Road & Track coilover.The u00d6hlins Road & Track Coilover suspension system has beenu00a0designed for those who are looking for ultimate handling performance without sacrificing daily comfort. Until now, there were compromises when seeking a proper dual-purpose coilover suitable for both street and track duty. The Road & Track coilover has eliminated those compromises with easy adjustability and proper damping and spring selection.When you arrive at the track, just turn the golden knob clockwise to change the stiffness of the shock to the race setting. Adjusting the shock to race mode changes all four areas of the damper; low and high-speed compression and rebound damping.The u00d6hlinsu00a0Road & Track team has extensively tested a wide variety of springs to find the perfect setup for an uncompromised dual-purpose coilover. With that, we recommend the listed spring rate that comes with these dampers (70N/mm Front, 140N/mm Rear).They are made out of light-weight aluminum and exceed ISO 9227 standards for corrosion and have a 2-year limited warranty.*All fitments are shown below*General FeaturesDFV technology (Dual Flow Valve)Height adjustableRebuildableCorrosion salt spray tested (ISO 9227)2-year limited warrantyFront:McPherson strut, upside downCompression and rebound damping with one adjusterSpring preload adjusterApprox.u00a010u00a0mm lower than standard with recommended setupHeight adjustment rangeu00a020 mmu00a0Spring rate 70 N/mmDustcoversUse with original top mountsRear:Compression and rebound damping with one adjusterSpring preload adjusterApprox.u00a010 mm lower than standard with recommended setupHeight adjustment rangeu00a020 mmu00a0Spring rate 140 N/mmDustcoversUse with original top mountsu00d6hlins Porscheu00a0991 Fitment: POU MS00991 - Carrera 4 / Carrera 4S (2012-16')991 - Turbo / Turbo S (2012-16')991.2 - Carrera 4 / Carrera 4S (2017-19')991.2 - Turbo / Turbo S (2017-19')make-porsche,make-porsche-model-911,make-porsche-model-911-chassis-991--2012-2016-,make-porsche-model-911-chassis-991--2012-2016--submodel-carrera---carrera-4--3-4l-,make-porsche-model-911-chassis-991--2012-2016--submodel-carrera-s---carrera-4s--3-8l-,make-porsche-model-911-chassis-991--2012-2016--submodel-turbo-s,make-porsche-model-911-chassis-991--2012-2016--submodel-turbo,make-porsche-model-911-chassis-991-2--2017-2019-,make-porsche-model-911-chassis-991-2--2017-2019--submodel-carrera---carrera-4--3-0l-,make-porsche-model-911-chassis-991-2--2017-2019--submodel-carrera---carrera-4--3-4l-,make-porsche-model-911-chassis-991-2--2017-2019--submodel-carrera-s---carrera-4s--3-0l-,make-porsche-model-911-chassis-991-2--2017-2019--submodel-carrera-s---carrera-4s--3-8l-,make-porsche-model-911-chassis-991-2--2017-2019--submodel-turbo-s,make-porsche-model-911-chassis-991-2--2017-2019--submodel-turbo 4853401387031 4853401387031_33016590794775 Öhlins Road & Track Coilover Kit for Porsche 911 996 Carrera POZ MI00 https://hinzmotorsport.com/products/ohlins-road-track-coilover-kit-for-porsche-911-996-carrera Ohlins https://cdn.shopify.com/s/files/1/0045/1179/3186/products/OhlinsRoad_Track11_50e0e266-6cbb-4724-a026-fd9f92202d2e.jpg?v=1610554690 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 22045 g 1 Default Title 2,790.00 u00d6hlins Road & Track Coiloversu00a0If you are looking for the highest quality true dual-purpose coilover for both street and track use, look no further than theu00a0u00d6hlinsu00a0Road & Track coilover.The u00d6hlins Road & Track Coilover suspension system has beenu00a0designed for those who are looking for ultimate handling performance without sacrificing daily comfort. Until now, there were compromises when seeking a proper dual-purpose coilover suitable for both street and track duty. The Road & Track coilover has eliminated those compromises with easy adjustability and proper damping and spring selection.When you arrive at the track, just turn the golden knob clockwise to change the stiffness of the shock to the race setting. Adjusting the shock to race mode changes all four areas of the damper; low and high-speed compression and rebound damping.The u00d6hlinsu00a0Road & Track team has extensively tested a wide variety of springs to find the perfect setup for an uncompromised dual-purpose coilover. With that, we recommend the listed spring rate that comes with these dampers (70N/mm Front, 80N/mm Rear).They are made out of light-weight aluminum and exceed ISO 9227 standards for corrosion and have a 2-year limited warranty.*All fitments are shown below*General FeaturesDFV technology (Dual Flow Valve)Height adjustableRebuildableCorrosion salt spray tested (ISO 9227)2-year limited warrantyFront:McPherson strut, upside downCompression and rebound damping with one adjusterSpring preload adjusterHeight adjustment rangeu00a020 mm lower than standardSpring rate 60 N/mmDustcoversUse with original top mountsRear:Compression and rebound damping with one adjusterSpring preload adjusterApprox.u00a05 mm lower than standard with recommended setupHeight adjustment rangeu00a020 mm lower than standardSpring rate 120 N/mmDustcoversUse with original top mountsu00d6hlins Porscheu00a0996 Fitment: POZ MI00996 -u00a0Carrera 3.4 (1999-01')996 -u00a0Carrera 3.6 (2002-04')make-porsche,make-porsche-model-911,make-porsche-model-911-chassis-996--1999-2004-,make-porsche-model-911-chassis-996--1999-2004--submodel-carrera---carrera-4--3-4l-,make-porsche-model-911-chassis-996--1999-2004--submodel-carrera---carrera-4--3-6l- 4853395390487 4853395390487_33016579522583 Öhlins Road & Track Coilover Kit for Porsche 911 997 GT2/GT3/GT3 RS POZ MN04 https://hinzmotorsport.com/products/ohlins-road-track-coilover-kit-for-porsche-911-997-gt2-gt3-gt3-rs Ohlins https://cdn.shopify.com/s/files/1/0045/1179/3186/products/OhlinsRoad_Track11_0045ae85-e978-4c8b-83d1-63b173e5720c.jpg?v=1610552709 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 20230 g 1 No 3,590.00 u00d6hlins Road & Track Coiloversu00a0If you are looking for the highest quality true dual-purpose coilover for both street and track use, look no further than theu00a0u00d6hlinsu00a0Road & Track coilover.The u00d6hlins Road & Track Coilover suspension system has beenu00a0designed for those who are looking for ultimate handling performance without sacrificing daily comfort. Until now, there were compromises when seeking a proper dual-purpose coilover suitable for both street and track duty. The Road & Track coilover has eliminated those compromises with easy adjustability and proper damping and spring selection.When you arrive at the track, just turn the golden knob clockwise to change the stiffness of the shock to the race setting. Adjusting the shock to race mode changes all four areas of the damper; low and high-speed compression and rebound damping.The u00d6hlinsu00a0Road & Track team has extensively tested a wide variety of springs to find the perfect setup for an uncompromised dual-purpose coilover. With that, we recommend the listed spring rate that comes with these dampers (90N/mm Front, 140N/mm Rear).They are made out of light-weight aluminum and exceed ISO 9227 standards for corrosion and have a 2-year limited warranty.*All fitments are shown below*General FeaturesDFV technology (Dual Flow Valve)Height adjustableRebuildableCorrosion salt spray tested (ISO 9227)2-year limited warrantyFront:Compression and rebound damping with one adjusterSpring preload adjusterApprox.u00a05 mm lower than standard with recommended setupHeight adjustment rangeu00a020 mmSpring rate 90 N/mmDustcoversUse with original top mountsRear:Compression and rebound damping with one adjusterSpring preload adjusterApprox.u00a05 mm lower than standard with recommended setupHeight adjustment rangeu00a020 mmSpring rate 140 N/mmDustcoversUse with original top mountsTheu00a0u00d6hlins EDC Cancellation Kitu00a0(35020-07)u00a0for Road and Track deactivates dash lights and error codes when electronically adjustable OEM suspension is replaced with a mechanical system. The cancellation kit is plugged into the original suspension controls. No further programming is needed.u00d6hlins Porscheu00a0997 Fitment: POZ MN04997 - GT3 (2005-08')997 - GT3 RS (2005-08')997 - GT2 (2007-09')997 -u00a0 Turbo (2007-09')997.2 - GT3 (2009-12')997.2 - GT3 RS (2009-12')997.2 - GT2 RSu00a0(2009-12')997.2 - Turbo S (2009-12')make-porsche,make-porsche-model-911,make-porsche-model-911-chassis-997--2005-2008-,make-porsche-model-911-chassis-997--2005-2008--submodel-gt2,make-porsche-model-911-chassis-997--2005-2008--submodel-gt3-rs,make-porsche-model-911-chassis-997--2005-2008--submodel-gt3,make-porsche-model-911-chassis-997--2005-2008--submodel-turbo--3-6l-,make-porsche-model-911-chassis-997--2005-2008--submodel-turbo-s--3-6l-,make-porsche-model-911-chassis-997-2--2009-2012-,make-porsche-model-911-chassis-997-2--2009-2012--submodel-gt2-rs,make-porsche-model-911-chassis-997-2--2009-2012--submodel-gt2,make-porsche-model-911-chassis-997-2--2009-2012--submodel-gt2rs,make-porsche-model-911-chassis-997-2--2009-2012--submodel-gt3-rs,make-porsche-model-911-chassis-997-2--2009-2012--submodel-gt3,make-porsche-model-911-chassis-997-2--2009-2012--submodel-turbo--3-8l-,make-porsche-model-911-chassis-997-2--2009-2012--submodel-turbo-s--3-8l- 4853395390487 4853395390487_33016579555351 Öhlins Road & Track Coilover Kit for Porsche 911 997 GT2/GT3/GT3 RS POZ MN04 + 35020-07 https://hinzmotorsport.com/products/ohlins-road-track-coilover-kit-for-porsche-911-997-gt2-gt3-gt3-rs Ohlins https://cdn.shopify.com/s/files/1/0045/1179/3186/products/OhlinsRoad_Track11_0045ae85-e978-4c8b-83d1-63b173e5720c.jpg?v=1610552709 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 20230 g 1 Yes - (35020-07) 4,100.00 u00d6hlins Road & Track Coiloversu00a0If you are looking for the highest quality true dual-purpose coilover for both street and track use, look no further than theu00a0u00d6hlinsu00a0Road & Track coilover.The u00d6hlins Road & Track Coilover suspension system has beenu00a0designed for those who are looking for ultimate handling performance without sacrificing daily comfort. Until now, there were compromises when seeking a proper dual-purpose coilover suitable for both street and track duty. The Road & Track coilover has eliminated those compromises with easy adjustability and proper damping and spring selection.When you arrive at the track, just turn the golden knob clockwise to change the stiffness of the shock to the race setting. Adjusting the shock to race mode changes all four areas of the damper; low and high-speed compression and rebound damping.The u00d6hlinsu00a0Road & Track team has extensively tested a wide variety of springs to find the perfect setup for an uncompromised dual-purpose coilover. With that, we recommend the listed spring rate that comes with these dampers (90N/mm Front, 140N/mm Rear).They are made out of light-weight aluminum and exceed ISO 9227 standards for corrosion and have a 2-year limited warranty.*All fitments are shown below*General FeaturesDFV technology (Dual Flow Valve)Height adjustableRebuildableCorrosion salt spray tested (ISO 9227)2-year limited warrantyFront:Compression and rebound damping with one adjusterSpring preload adjusterApprox.u00a05 mm lower than standard with recommended setupHeight adjustment rangeu00a020 mmSpring rate 90 N/mmDustcoversUse with original top mountsRear:Compression and rebound damping with one adjusterSpring preload adjusterApprox.u00a05 mm lower than standard with recommended setupHeight adjustment rangeu00a020 mmSpring rate 140 N/mmDustcoversUse with original top mountsTheu00a0u00d6hlins EDC Cancellation Kitu00a0(35020-07)u00a0for Road and Track deactivates dash lights and error codes when electronically adjustable OEM suspension is replaced with a mechanical system. The cancellation kit is plugged into the original suspension controls. No further programming is needed.u00d6hlins Porscheu00a0997 Fitment: POZ MN04997 - GT3 (2005-08')997 - GT3 RS (2005-08')997 - GT2 (2007-09')997 -u00a0 Turbo (2007-09')997.2 - GT3 (2009-12')997.2 - GT3 RS (2009-12')997.2 - GT2 RSu00a0(2009-12')997.2 - Turbo S (2009-12')make-porsche,make-porsche-model-911,make-porsche-model-911-chassis-997--2005-2008-,make-porsche-model-911-chassis-997--2005-2008--submodel-gt2,make-porsche-model-911-chassis-997--2005-2008--submodel-gt3-rs,make-porsche-model-911-chassis-997--2005-2008--submodel-gt3,make-porsche-model-911-chassis-997--2005-2008--submodel-turbo--3-6l-,make-porsche-model-911-chassis-997--2005-2008--submodel-turbo-s--3-6l-,make-porsche-model-911-chassis-997-2--2009-2012-,make-porsche-model-911-chassis-997-2--2009-2012--submodel-gt2-rs,make-porsche-model-911-chassis-997-2--2009-2012--submodel-gt2,make-porsche-model-911-chassis-997-2--2009-2012--submodel-gt2rs,make-porsche-model-911-chassis-997-2--2009-2012--submodel-gt3-rs,make-porsche-model-911-chassis-997-2--2009-2012--submodel-gt3,make-porsche-model-911-chassis-997-2--2009-2012--submodel-turbo--3-8l-,make-porsche-model-911-chassis-997-2--2009-2012--submodel-turbo-s--3-8l- 4853383692311 4853383692311_33016564088855 Öhlins Dedicated Track Damper Kit for Porsche 911 F/G/930 Models POU ML00 https://hinzmotorsport.com/products/ohlins-dedicated-track-coilover-kit-for-porsche-911-g-models Ohlins https://cdn.shopify.com/s/files/1/0045/1179/3186/products/ohlinspouml00.jpg?v=1610551975 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 24494 g 0 Default Title 3,290.00 2,990.00 u00d6hlins Dedicated Tracku00a0DampersFitment for all 911 models with torsion bars (1965-1989) including 930 Turbo. *Requires 40mm Strut Housing*If you are looking for the highest qualityu00a0dampersu00a0for track use for early/vintage 911's, look no further than theu00a0u00d6hlinsu00a0DEDICATEDu00a0Track suspension system. Theseu00a0dampers offer race-level performance ready to bolt onto your car. Very popular in historic racing as well as trailered track cars also enjoyed on the street.The 911/930 Dedicated damper package is designed for use with any air-cooled, torsion bar equipped 911 with the inclusion of OE 40mm ID strut housings (if not equipped from the factory). The damper package offers motorsport level STX technology, offering adjustable damping specifically tuned for 22-23mm front torsion bars and 31-33mm rear torsion bars. Ohlins have also added a clever light-weight design with a majority of the parts in aluminum and on top of that, all shocks have suffered through vast corrosion tests according to ISO 9227. The end result is a 2-year limited warranty on this particular package. Dampers can be rebuilt and custom-tuned for any specific application.*Please contact for availability/timing as these are special order.*Features:Developed for Track Cars/Historic RacingAdjustable Damping and Ride HeightRebuildable & Custom-TuneableDoes not include Torsion BarsFitment: POU ML00 - Requires 40mm Strut HousingsPorscheu00a0911u00a0F 1965-1973Porscheu00a0911 G 1974-1989Porsche 911 930 Turbomake-porsche,make-porsche-model-911,make-porsche-model-911-chassis-911-f--1965-1973-,make-porsche-model-911-chassis-911-f--1965-1973--submodel-2-0--1965-69-,make-porsche-model-911-chassis-911-f--1965-1973--submodel-2-2-s--1970-71-,make-porsche-model-911-chassis-911-f--1965-1973--submodel-2-4-s--1972-73-,make-porsche-model-911-chassis-911-g--1974-1989-,make-porsche-model-911-chassis-911-g--1974-1989--submodel-carrera-2-7--1974-76-,make-porsche-model-911-chassis-911-g--1974-1989--submodel-carrera-3-0--1976-77-,make-porsche-model-911-chassis-911-g--1974-1989--submodel-carrera-3-2--1984-89-,make-porsche-model-911-chassis-911-g--1974-1989--submodel-sc-3-0--1978-83-,make-porsche-model-911-chassis-911-g--1974-1989--submodel-turbo--3-0l-,make-porsche-model-911-chassis-911-g--1974-1989--submodel-turbo--3-3l- 4851301384215 4851301384215_33012316536855 Öhlins Dedicated Track Coilover Kit for Porsche 911 996 Carrera/GT3 POU MU10 https://hinzmotorsport.com/products/ohlins-dedicated-track-coilover-kit-for-porsche-911-996-carrera-gt3 Ohlins https://cdn.shopify.com/s/files/1/0045/1179/3186/products/OhlinsRoad_Track11_46ad2e03-678d-4ecf-8d5c-7ae289c829d6.jpg?v=1610119776 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 24176 g 1 Default Title 4,590.00 u00d6hlins Dedicated Track Coiloversu00a0If you are looking for the highest quality coilovers for track use, look no further than theu00a0u00d6hlinsu00a0DEDICATED suspension system. These coilovers offer race-level performance ready to bolt onto your car.These coilovers are built with Swift springs manufactured to u00d6hlins specs. Shake rig developed and track validated with specific spring rates, clicker settings, and ride height specifications. The entire performance picture is taken into account when developing their DEDICATEDu00a0systems, as each is engineered to perform with proven track setups for each specific chassis.Systems utilize Dual Flow Valve technology allowing engineers to tune force curves ideally balanced for chassis support and maintaining traction over pavement irregularities and on-track curb strikes. Spherical upper mounts included.The u00d6hlinsu00a0team has extensively tested a wide variety of springs to find the perfect setup for track-focused coilover. With that, we recommend the listed spring rate that comes with these dampers (110N/mm Front, 150N/mm Rear).*Please allow up to 3 weeks for delivery**All fitments are shown below*Highlightedu00a0Features:DFV Technology (Dual Flow Valve)Developed for Track CarsAdjustable Damping and Ride HeightIncludes Spherical Upper MountsRebuildableTarget Ride Height Reduction: 15-25mmFront:McPherson strut, upside downCompression and rebound damping with one adjusterSpring preload adjusterSpring Rate 110 N/mmRear:McPherson strut, upside downCompression and rebound damping with one adjusterSpring preload adjusterSpring Rate 150 N/mmFitment: POU MU10Porsche 996 Carrera 1999-2004Porsche 996u00a0u00a0GT3 2002-2004make-porsche,make-porsche-model-911,make-porsche-model-911-chassis-996--1999-2004-,make-porsche-model-911-chassis-996--1999-2004--submodel-carrera---carrera-4--3-4l-,make-porsche-model-911-chassis-996--1999-2004--submodel-carrera---carrera-4--3-6l-,make-porsche-model-911-chassis-996--1999-2004--submodel-gt3--2002-04-,make-porsche-model-911-chassis-996--1999-2004--submodel-gt3-rs 4851091898391 4851091898391_33011880132631 Öhlins Dedicated Track Coilover Kit for Porsche 981 Boxster/Cayman Models POU MU40 https://hinzmotorsport.com/products/ohlins-dedicated-track-coilover-kit-for-porsche-981-boxster-cayman-models Ohlins https://cdn.shopify.com/s/files/1/0045/1179/3186/products/OhlinsRoad_Track11_5878db97-9858-4608-ae84-5937eea498ff.jpg?v=1610063255 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 27216 g 1 No 4,850.00 u00d6hlins Dedicated Track Coiloversu00a0If you are looking for the highest quality coilovers for track use, look no further than theu00a0u00d6hlinsu00a0DEDICATED suspension system. These coilovers offer race-level performance ready to bolt onto your car.These coilovers are built with Swift springs manufactured to u00d6hlins specs. Shake rig developed and track validated with specific spring rates, clicker settings, and ride height specifications. The entire performance picture is taken into account when developing their DEDICATEDu00a0systems, as each is engineered to perform with proven track setups for each specific chassis.Systems utilize Dual Flow Valve technology allowing engineers to tune force curves ideally balanced for chassis support and maintaining traction over pavement irregularities and on-track curb strikes. Spherical upper mounts included.The u00d6hlinsu00a0team has extensively tested a wide variety of springs to find the perfect setup for track-focused coilover. With that, we recommend the listed spring rate that comes with these dampers (110N/mm Front, 130N/mm Rear).*Please allow up to 3 weeks for delivery**All fitments are shown below*Highlightedu00a0Features:DFV Technology (Dual Flow Valve)Developed for Track CarsAdjustable Damping and Ride HeightIncludes Spherical Upper MountsRebuildableFront:McPherson strut, upside downCompression and rebound damping with one adjusterSpring preload adjusterApprox. 20 mm lower than standard with recommended setupHeight adjustment range -15/+15 mmSpring Rate 110 N/mmRear:McPherson strut, upside downCompression and rebound damping with one adjusterSpring preload adjusterApprox. 20 mm lower than standard with recommended setupHeight adjustment range -15/+15 mmSpring Rate 130 N/mmTheu00a0u00d6hlins EDC Cancellation Kitu00a0(35020-07)u00a0for Road and Track deactivates dash lights and error codes when electronically adjustable OEM suspension is replaced with a mechanical system. The cancellation kit is plugged into the original suspension controls. No further programming is needed.Fitment: POU MU40981 - Cayman 2.7 (2014-16')981 - Cayman S 3.4 (2014-16')981 - Cayman GTS 3.4 (2014-16')982 - 718 Cayman 2.0 (2017-20')982 - 718 Cayman T 2.0 (2019-20')982 - 718 Cayman S 2.5 (2017-20')982 - 718 Cayman GTS 2.5 (2018-20')981 -u00a0Boxster 2.7 (2014-16')981 - Boxster S 3.4 (2014-16')981 - Boxster GTS 3.4 (2014-16')982 - 718 Boxster 2.0 (2017-20')982 - 718 Boxster T 2.0 (2019-20')982 - 718 Boxster S 2.5 (2017-20')982 - 718 Boxster GTS 2.5 (2018-20')make-porsche,make-porsche-model-boxster,make-porsche-model-boxster-chassis-981--2014-2016-,make-porsche-model-boxster-chassis-981--2014-2016--submodel-boxster--2-7l-,make-porsche-model-boxster-chassis-981--2014-2016--submodel-boxster-gts--3-4l-,make-porsche-model-boxster-chassis-981--2014-2016--submodel-boxster-s--3-4l-,make-porsche-model-cayman,make-porsche-model-cayman-chassis-981--2014-2016-,make-porsche-model-cayman-chassis-981--2014-2016--submodel-cayman--2-7l-,make-porsche-model-cayman-chassis-981--2014-2016--submodel-cayman-gts--3-4l-,make-porsche-model-cayman-chassis-981--2014-2016--submodel-cayman-s--3-4l- 4851091898391 4851091898391_33011880165399 Öhlins Dedicated Track Coilover Kit for Porsche 981 Boxster/Cayman Models POU MU40 + 35020-07 https://hinzmotorsport.com/products/ohlins-dedicated-track-coilover-kit-for-porsche-981-boxster-cayman-models Ohlins https://cdn.shopify.com/s/files/1/0045/1179/3186/products/OhlinsRoad_Track11_5878db97-9858-4608-ae84-5937eea498ff.jpg?v=1610063255 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 27216 g 1 Yes - (35020-07) 5,360.00 u00d6hlins Dedicated Track Coiloversu00a0If you are looking for the highest quality coilovers for track use, look no further than theu00a0u00d6hlinsu00a0DEDICATED suspension system. These coilovers offer race-level performance ready to bolt onto your car.These coilovers are built with Swift springs manufactured to u00d6hlins specs. Shake rig developed and track validated with specific spring rates, clicker settings, and ride height specifications. The entire performance picture is taken into account when developing their DEDICATEDu00a0systems, as each is engineered to perform with proven track setups for each specific chassis.Systems utilize Dual Flow Valve technology allowing engineers to tune force curves ideally balanced for chassis support and maintaining traction over pavement irregularities and on-track curb strikes. Spherical upper mounts included.The u00d6hlinsu00a0team has extensively tested a wide variety of springs to find the perfect setup for track-focused coilover. With that, we recommend the listed spring rate that comes with these dampers (110N/mm Front, 130N/mm Rear).*Please allow up to 3 weeks for delivery**All fitments are shown below*Highlightedu00a0Features:DFV Technology (Dual Flow Valve)Developed for Track CarsAdjustable Damping and Ride HeightIncludes Spherical Upper MountsRebuildableFront:McPherson strut, upside downCompression and rebound damping with one adjusterSpring preload adjusterApprox. 20 mm lower than standard with recommended setupHeight adjustment range -15/+15 mmSpring Rate 110 N/mmRear:McPherson strut, upside downCompression and rebound damping with one adjusterSpring preload adjusterApprox. 20 mm lower than standard with recommended setupHeight adjustment range -15/+15 mmSpring Rate 130 N/mmTheu00a0u00d6hlins EDC Cancellation Kitu00a0(35020-07)u00a0for Road and Track deactivates dash lights and error codes when electronically adjustable OEM suspension is replaced with a mechanical system. The cancellation kit is plugged into the original suspension controls. No further programming is needed.Fitment: POU MU40981 - Cayman 2.7 (2014-16')981 - Cayman S 3.4 (2014-16')981 - Cayman GTS 3.4 (2014-16')982 - 718 Cayman 2.0 (2017-20')982 - 718 Cayman T 2.0 (2019-20')982 - 718 Cayman S 2.5 (2017-20')982 - 718 Cayman GTS 2.5 (2018-20')981 -u00a0Boxster 2.7 (2014-16')981 - Boxster S 3.4 (2014-16')981 - Boxster GTS 3.4 (2014-16')982 - 718 Boxster 2.0 (2017-20')982 - 718 Boxster T 2.0 (2019-20')982 - 718 Boxster S 2.5 (2017-20')982 - 718 Boxster GTS 2.5 (2018-20')make-porsche,make-porsche-model-boxster,make-porsche-model-boxster-chassis-981--2014-2016-,make-porsche-model-boxster-chassis-981--2014-2016--submodel-boxster--2-7l-,make-porsche-model-boxster-chassis-981--2014-2016--submodel-boxster-gts--3-4l-,make-porsche-model-boxster-chassis-981--2014-2016--submodel-boxster-s--3-4l-,make-porsche-model-cayman,make-porsche-model-cayman-chassis-981--2014-2016-,make-porsche-model-cayman-chassis-981--2014-2016--submodel-cayman--2-7l-,make-porsche-model-cayman-chassis-981--2014-2016--submodel-cayman-gts--3-4l-,make-porsche-model-cayman-chassis-981--2014-2016--submodel-cayman-s--3-4l- 4851084820503 4851084820503_33011863683095 Öhlins Dedicated Track Coilover Kit for Porsche 718 Boxster/Cayman Models POU MU40 https://hinzmotorsport.com/products/ohlins-dedicated-track-coilover-kit-for-porsche-718-boxster-cayman-models Ohlins https://cdn.shopify.com/s/files/1/0045/1179/3186/products/OhlinsRoad_Track11_dcfecc93-4660-465d-a11a-b8d6ce45f543.jpg?v=1610059694 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 27216 g 1 No 4,850.00 u00d6hlins Dedicated Track Coiloversu00a0If you are looking for the highest quality coilovers for track use, look no further than theu00a0u00d6hlinsu00a0DEDICATED suspension system. These coilovers offer race-level performance ready to bolt onto your car.These coilovers are built with Swift springs manufactured to u00d6hlins specs. Shake rig developed and track validated with specific spring rates, clicker settings, and ride height specifications. The entire performance picture is taken into account when developing their DEDICATEDu00a0systems, as each is engineered to perform with proven track setups for each specific chassis.Systems utilize Dual Flow Valve technology allowing engineers to tune force curves ideally balanced for chassis support and maintaining traction over pavement irregularities and on-track curb strikes. Spherical upper mounts included.The u00d6hlinsu00a0team has extensively tested a wide variety of springs to find the perfect setup for track-focused coilover. With that, we recommend the listed spring rate that comes with these dampers (110N/mm Front, 130N/mm Rear).*Please allow up to 3 weeks for delivery**All fitments are shown below*Highlightedu00a0Features:DFV Technology (Dual Flow Valve)Developed for Track CarsAdjustable Damping and Ride HeightIncludes Spherical Upper MountsRebuildableFront:McPherson strut, upside downCompression and rebound damping with one adjusterSpring preload adjusterApprox. 20 mm lower than standard with recommended setupHeight adjustment range -15/+15 mmSpring Rate 110 N/mmRear:McPherson strut, upside downCompression and rebound damping with one adjusterSpring preload adjusterApprox. 20 mm lower than standard with recommended setupHeight adjustment range -15/+15 mmSpring Rate 130 N/mmTheu00a0u00d6hlins EDC Cancellation Kitu00a0(35020-07)u00a0for Road and Track deactivates dash lights and error codes when electronically adjustable OEM suspension is replaced with a mechanical system. The cancellation kit is plugged into the original suspension controls. No further programming is needed.Fitment: POU MU40981 - Cayman 2.7 (2014-16')981 - Cayman S 3.4 (2014-16')981 - Cayman GTS 3.4 (2014-16')982 - 718 Cayman 2.0 (2017-20')982 - 718 Cayman T 2.0 (2019-20')982 - 718 Cayman S 2.5 (2017-20')982 - 718 Cayman GTS 2.5 (2018-20')981 -u00a0Boxster 2.7 (2014-16')981 - Boxster S 3.4 (2014-16')981 - Boxster GTS 3.4 (2014-16')982 - 718 Boxster 2.0 (2017-20')982 - 718 Boxster T 2.0 (2019-20')982 - 718 Boxster S 2.5 (2017-20')982 - 718 Boxster GTS 2.5 (2018-20')make-porsche,make-porsche-model-boxster,make-porsche-model-boxster-chassis-718--2017-2021-,make-porsche-model-boxster-chassis-718--2017-2021--submodel-boxster--2-0l-,make-porsche-model-boxster-chassis-718--2017-2021--submodel-boxster-gts--2-5l-,make-porsche-model-boxster-chassis-718--2017-2021--submodel-boxster-s--2-5l-,make-porsche-model-boxster-chassis-718--2017-2021--submodel-boxster-t--2-0l-,make-porsche-model-cayman,make-porsche-model-cayman-chassis-718--2017-2021-,make-porsche-model-cayman-chassis-718--2017-2021--submodel-cayman--2-0l-,make-porsche-model-cayman-chassis-718--2017-2021--submodel-cayman-gts--2-5l-,make-porsche-model-cayman-chassis-718--2017-2021--submodel-cayman-s--2-5l-,make-porsche-model-cayman-chassis-718--2017-2021--submodel-cayman-t--2-0l- 4851084820503 4851084820503_33011863715863 Öhlins Dedicated Track Coilover Kit for Porsche 718 Boxster/Cayman Models POU MU40 + 35020-07 https://hinzmotorsport.com/products/ohlins-dedicated-track-coilover-kit-for-porsche-718-boxster-cayman-models Ohlins https://cdn.shopify.com/s/files/1/0045/1179/3186/products/OhlinsRoad_Track11_dcfecc93-4660-465d-a11a-b8d6ce45f543.jpg?v=1610059694 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 27216 g 1 Yes - (35020-07) 5,360.00 u00d6hlins Dedicated Track Coiloversu00a0If you are looking for the highest quality coilovers for track use, look no further than theu00a0u00d6hlinsu00a0DEDICATED suspension system. These coilovers offer race-level performance ready to bolt onto your car.These coilovers are built with Swift springs manufactured to u00d6hlins specs. Shake rig developed and track validated with specific spring rates, clicker settings, and ride height specifications. The entire performance picture is taken into account when developing their DEDICATEDu00a0systems, as each is engineered to perform with proven track setups for each specific chassis.Systems utilize Dual Flow Valve technology allowing engineers to tune force curves ideally balanced for chassis support and maintaining traction over pavement irregularities and on-track curb strikes. Spherical upper mounts included.The u00d6hlinsu00a0team has extensively tested a wide variety of springs to find the perfect setup for track-focused coilover. With that, we recommend the listed spring rate that comes with these dampers (110N/mm Front, 130N/mm Rear).*Please allow up to 3 weeks for delivery**All fitments are shown below*Highlightedu00a0Features:DFV Technology (Dual Flow Valve)Developed for Track CarsAdjustable Damping and Ride HeightIncludes Spherical Upper MountsRebuildableFront:McPherson strut, upside downCompression and rebound damping with one adjusterSpring preload adjusterApprox. 20 mm lower than standard with recommended setupHeight adjustment range -15/+15 mmSpring Rate 110 N/mmRear:McPherson strut, upside downCompression and rebound damping with one adjusterSpring preload adjusterApprox. 20 mm lower than standard with recommended setupHeight adjustment range -15/+15 mmSpring Rate 130 N/mmTheu00a0u00d6hlins EDC Cancellation Kitu00a0(35020-07)u00a0for Road and Track deactivates dash lights and error codes when electronically adjustable OEM suspension is replaced with a mechanical system. The cancellation kit is plugged into the original suspension controls. No further programming is needed.Fitment: POU MU40981 - Cayman 2.7 (2014-16')981 - Cayman S 3.4 (2014-16')981 - Cayman GTS 3.4 (2014-16')982 - 718 Cayman 2.0 (2017-20')982 - 718 Cayman T 2.0 (2019-20')982 - 718 Cayman S 2.5 (2017-20')982 - 718 Cayman GTS 2.5 (2018-20')981 -u00a0Boxster 2.7 (2014-16')981 - Boxster S 3.4 (2014-16')981 - Boxster GTS 3.4 (2014-16')982 - 718 Boxster 2.0 (2017-20')982 - 718 Boxster T 2.0 (2019-20')982 - 718 Boxster S 2.5 (2017-20')982 - 718 Boxster GTS 2.5 (2018-20')make-porsche,make-porsche-model-boxster,make-porsche-model-boxster-chassis-718--2017-2021-,make-porsche-model-boxster-chassis-718--2017-2021--submodel-boxster--2-0l-,make-porsche-model-boxster-chassis-718--2017-2021--submodel-boxster-gts--2-5l-,make-porsche-model-boxster-chassis-718--2017-2021--submodel-boxster-s--2-5l-,make-porsche-model-boxster-chassis-718--2017-2021--submodel-boxster-t--2-0l-,make-porsche-model-cayman,make-porsche-model-cayman-chassis-718--2017-2021-,make-porsche-model-cayman-chassis-718--2017-2021--submodel-cayman--2-0l-,make-porsche-model-cayman-chassis-718--2017-2021--submodel-cayman-gts--2-5l-,make-porsche-model-cayman-chassis-718--2017-2021--submodel-cayman-s--2-5l-,make-porsche-model-cayman-chassis-718--2017-2021--submodel-cayman-t--2-0l- 4851079839767 4851079839767_33011851722775 Öhlins Road & Track Coilover Kit for Porsche 718 Boxster/Cayman Models POU MP80 https://hinzmotorsport.com/products/ohlins-road-track-coilover-kit-for-porsche-718-boxster-models-981-982 Ohlins https://cdn.shopify.com/s/files/1/0045/1179/3186/products/OhlinsRoad_Track11_66d64cb5-12d5-484e-b072-26b9e8e6ba3a.jpg?v=1610057984 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 25401 g 0 No 3,100.00 u00d6hlins Road & Track Coiloversu00a0If you are looking for the highest quality true dual-purpose coilover for both street and track use, look no further than theu00a0u00d6hlinsu00a0Road & Track coilover.The u00d6hlins Road & Track Coilover suspension system has beenu00a0designed for those who are looking for ultimate handling performance without sacrificing daily comfort. Until now, there were compromises when seeking a proper dual-purpose coilover suitable for both street and track duty. The Road & Track coilover has eliminated those compromises with easy adjustability and proper damping and spring selection.When you arrive at the track, just turn the golden knob clockwise to change the stiffness of the shock to the race setting. Adjusting the shock to race mode changes all four areas of the damper; low and high-speed compression and rebound damping.The u00d6hlinsu00a0Road & Track team has extensively tested a wide variety of springs to find the perfect setup for an uncompromised dual-purpose coilover. With that, we recommend the listed spring rate that comes with these dampers (70N/mm Front, 80N/mm Rear).They are made out of light-weight aluminum and exceed ISO 9227 standards for corrosion and have a 2-year limited warranty.*All fitments are shown below*General FeaturesDFV technology (Dual Flow Valve)Height adjustableRebuildableCorrosion salt spray tested (ISO 9227)2-year limited warrantyFront:McPherson strut, upside downCompression and rebound damping with one adjusterSpring preload adjusterApprox. 20 mm lower than standard with recommended setupHeight adjustment range -15/+15 mmSpring rate 70 N/mmDustcoversUse with original top mountsRear:McPherson strut, upside downCompression and rebound damping with one adjusterSpring preload adjusterApprox. 20 mm lower than standard with recommended setupHeight adjustment range -15/+15 mmSpring rate 80 N/mmDustcoversUse with original top mountsTheu00a0u00d6hlins EDC Cancellation Kitu00a0(35020-07)u00a0for Road and Track deactivates dash lights and error codes when electronically adjustable OEM suspension is replaced with a mechanical system. The cancellation kit is plugged into the original suspension controls. No further programming is needed.u00d6hlins Porsche 981/982 Fitment: POU MP80981 - Cayman 2.7 (2014-16')981 - Cayman S 3.4 (2014-16')981 - Cayman GTS 3.4 (2014-16')982 - 718 Cayman 2.0 (2017-20')982 - 718 Cayman T 2.0 (2019-20')982 - 718 Cayman S 2.5 (2017-20')982 - 718 Cayman GTS 2.5 (2018-20')981 -u00a0Boxster 2.7 (2014-16')981 - Boxster S 3.4 (2014-16')981 - Boxster GTS 3.4 (2014-16')982 - 718 Boxster 2.0 (2017-20')982 - 718 Boxster T 2.0 (2019-20')982 - 718 Boxster S 2.5 (2017-20')982 - 718 Boxster GTS 2.5 (2018-20')make-porsche,make-porsche-model-boxster,make-porsche-model-boxster-chassis-718--2017-2021-,make-porsche-model-boxster-chassis-718--2017-2021--submodel-boxster--2-0l-,make-porsche-model-boxster-chassis-718--2017-2021--submodel-boxster-gts--2-5l-,make-porsche-model-boxster-chassis-718--2017-2021--submodel-boxster-s--2-5l-,make-porsche-model-boxster-chassis-718--2017-2021--submodel-boxster-t--2-0l-,make-porsche-model-cayman,make-porsche-model-cayman-chassis-718--2017-2021-,make-porsche-model-cayman-chassis-718--2017-2021--submodel-cayman--2-0l-,make-porsche-model-cayman-chassis-718--2017-2021--submodel-cayman-gts--2-5l-,make-porsche-model-cayman-chassis-718--2017-2021--submodel-cayman-s--2-5l-,make-porsche-model-cayman-chassis-718--2017-2021--submodel-cayman-t--2-0l- 4851079839767 4851079839767_33011851755543 Öhlins Road & Track Coilover Kit for Porsche 718 Boxster/Cayman Models POU MP80 + 35020-07 https://hinzmotorsport.com/products/ohlins-road-track-coilover-kit-for-porsche-718-boxster-models-981-982 Ohlins https://cdn.shopify.com/s/files/1/0045/1179/3186/products/OhlinsRoad_Track11_66d64cb5-12d5-484e-b072-26b9e8e6ba3a.jpg?v=1610057984 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 25401 g 0 Yes - (35020-07) 3,610.00 u00d6hlins Road & Track Coiloversu00a0If you are looking for the highest quality true dual-purpose coilover for both street and track use, look no further than theu00a0u00d6hlinsu00a0Road & Track coilover.The u00d6hlins Road & Track Coilover suspension system has beenu00a0designed for those who are looking for ultimate handling performance without sacrificing daily comfort. Until now, there were compromises when seeking a proper dual-purpose coilover suitable for both street and track duty. The Road & Track coilover has eliminated those compromises with easy adjustability and proper damping and spring selection.When you arrive at the track, just turn the golden knob clockwise to change the stiffness of the shock to the race setting. Adjusting the shock to race mode changes all four areas of the damper; low and high-speed compression and rebound damping.The u00d6hlinsu00a0Road & Track team has extensively tested a wide variety of springs to find the perfect setup for an uncompromised dual-purpose coilover. With that, we recommend the listed spring rate that comes with these dampers (70N/mm Front, 80N/mm Rear).They are made out of light-weight aluminum and exceed ISO 9227 standards for corrosion and have a 2-year limited warranty.*All fitments are shown below*General FeaturesDFV technology (Dual Flow Valve)Height adjustableRebuildableCorrosion salt spray tested (ISO 9227)2-year limited warrantyFront:McPherson strut, upside downCompression and rebound damping with one adjusterSpring preload adjusterApprox. 20 mm lower than standard with recommended setupHeight adjustment range -15/+15 mmSpring rate 70 N/mmDustcoversUse with original top mountsRear:McPherson strut, upside downCompression and rebound damping with one adjusterSpring preload adjusterApprox. 20 mm lower than standard with recommended setupHeight adjustment range -15/+15 mmSpring rate 80 N/mmDustcoversUse with original top mountsTheu00a0u00d6hlins EDC Cancellation Kitu00a0(35020-07)u00a0for Road and Track deactivates dash lights and error codes when electronically adjustable OEM suspension is replaced with a mechanical system. The cancellation kit is plugged into the original suspension controls. No further programming is needed.u00d6hlins Porsche 981/982 Fitment: POU MP80981 - Cayman 2.7 (2014-16')981 - Cayman S 3.4 (2014-16')981 - Cayman GTS 3.4 (2014-16')982 - 718 Cayman 2.0 (2017-20')982 - 718 Cayman T 2.0 (2019-20')982 - 718 Cayman S 2.5 (2017-20')982 - 718 Cayman GTS 2.5 (2018-20')981 -u00a0Boxster 2.7 (2014-16')981 - Boxster S 3.4 (2014-16')981 - Boxster GTS 3.4 (2014-16')982 - 718 Boxster 2.0 (2017-20')982 - 718 Boxster T 2.0 (2019-20')982 - 718 Boxster S 2.5 (2017-20')982 - 718 Boxster GTS 2.5 (2018-20')make-porsche,make-porsche-model-boxster,make-porsche-model-boxster-chassis-718--2017-2021-,make-porsche-model-boxster-chassis-718--2017-2021--submodel-boxster--2-0l-,make-porsche-model-boxster-chassis-718--2017-2021--submodel-boxster-gts--2-5l-,make-porsche-model-boxster-chassis-718--2017-2021--submodel-boxster-s--2-5l-,make-porsche-model-boxster-chassis-718--2017-2021--submodel-boxster-t--2-0l-,make-porsche-model-cayman,make-porsche-model-cayman-chassis-718--2017-2021-,make-porsche-model-cayman-chassis-718--2017-2021--submodel-cayman--2-0l-,make-porsche-model-cayman-chassis-718--2017-2021--submodel-cayman-gts--2-5l-,make-porsche-model-cayman-chassis-718--2017-2021--submodel-cayman-s--2-5l-,make-porsche-model-cayman-chassis-718--2017-2021--submodel-cayman-t--2-0l- 4851050250263 4851050250263_33011777437719 Öhlins Road & Track Coilover Kit for Porsche 981 Boxster/Cayman Models POU MP80 https://hinzmotorsport.com/products/ohlins-road-track-coilover-kit-for-porsche-cayman-models-981-982 Ohlins https://cdn.shopify.com/s/files/1/0045/1179/3186/products/OhlinsRoad_Track11.jpg?v=1610056566 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 25401 g 0 No 3,100.00 u00d6hlins Road & Track Coiloversu00a0If you are looking for the highest quality true dual-purpose coilover for both street and track use, look no further than theu00a0u00d6hlinsu00a0Road & Track coilover.The u00d6hlins Road & Track Coilover suspension system has beenu00a0designed for those who are looking for ultimate handling performance without sacrificing daily comfort. Until now, there were compromises when seeking a proper dual-purpose coilover suitable for both street and track duty. The Road & Track coilover has eliminated those compromises with easy adjustability and proper damping and spring selection.When you arrive at the track, just turn the golden knob clockwise to change the stiffness of the shock to the race setting. Adjusting the shock to race mode changes all four areas of the damper; low and high-speed compression and rebound damping.The u00d6hlinsu00a0Road & Track team has extensively tested a wide variety of springs to find the perfect setup for an uncompromised dual-purpose coilover. With that, we recommend the listed spring rate that comes with these dampers (70N/mm Front, 80N/mm Rear).They are made out of light-weight aluminum and exceed ISO 9227 standards for corrosion and have a 2-year limited warranty.*All fitments are shown below*General FeaturesDFV technology (Dual Flow Valve)Height adjustableRebuildableCorrosion salt spray tested (ISO 9227)2-year limited warrantyFront:McPherson strut, upside downCompression and rebound damping with one adjusterSpring preload adjusterApprox. 20 mm lower than standard with recommended setupHeight adjustment range -15/+15 mmSpring rate 70 N/mmDustcoversUse with original top mountsRear:McPherson strut, upside downCompression and rebound damping with one adjusterSpring preload adjusterApprox. 20 mm lower than standard with recommended setupHeight adjustment range -15/+15 mmSpring rate 80 N/mmDustcoversUse with original top mountsThe u00d6hlins EDC Cancellation Kitu00a0(35020-07) for Road and Track deactivates dash lights and error codes when electronically adjustable OEM suspension is replaced with a mechanical system. The cancellation kit is plugged into the original suspension controls. No further programming is needed.Fitment: POU MP80981 - Cayman 2.7 (2014-16')981 - Cayman S 3.4 (2014-16')981 - Cayman GTS 3.4 (2014-16')982 - 718 Cayman 2.0 (2017-20')982 - 718 Cayman T 2.0 (2019-20')982 - 718 Cayman S 2.5 (2017-20')982 - 718 Cayman GTS 2.5 (2018-20')981 -u00a0Boxster 2.7 (2014-16')981 - Boxster S 3.4 (2014-16')981 - Boxster GTS 3.4 (2014-16')982 - 718 Boxster 2.0 (2017-20')982 - 718 Boxster T 2.0 (2019-20')982 - 718 Boxster S 2.5 (2017-20')982 - 718 Boxster GTS 2.5 (2018-20')make-porsche,make-porsche-model-boxster,make-porsche-model-boxster-chassis-981--2014-2016-,make-porsche-model-boxster-chassis-981--2014-2016--submodel-boxster--2-7l-,make-porsche-model-boxster-chassis-981--2014-2016--submodel-boxster-gts--3-4l-,make-porsche-model-boxster-chassis-981--2014-2016--submodel-boxster-s--3-4l-,make-porsche-model-cayman,make-porsche-model-cayman-chassis-981--2014-2016-,make-porsche-model-cayman-chassis-981--2014-2016--submodel-cayman--2-7l-,make-porsche-model-cayman-chassis-981--2014-2016--submodel-cayman-gts--3-4l-,make-porsche-model-cayman-chassis-981--2014-2016--submodel-cayman-s--3-4l- 4851050250263 4851050250263_33011777470487 Öhlins Road & Track Coilover Kit for Porsche 981 Boxster/Cayman Models POU MP80 + 35020-07 https://hinzmotorsport.com/products/ohlins-road-track-coilover-kit-for-porsche-cayman-models-981-982 Ohlins https://cdn.shopify.com/s/files/1/0045/1179/3186/products/OhlinsRoad_Track11.jpg?v=1610056566 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 25401 g 0 Yes - (35020-07) 3,610.00 u00d6hlins Road & Track Coiloversu00a0If you are looking for the highest quality true dual-purpose coilover for both street and track use, look no further than theu00a0u00d6hlinsu00a0Road & Track coilover.The u00d6hlins Road & Track Coilover suspension system has beenu00a0designed for those who are looking for ultimate handling performance without sacrificing daily comfort. Until now, there were compromises when seeking a proper dual-purpose coilover suitable for both street and track duty. The Road & Track coilover has eliminated those compromises with easy adjustability and proper damping and spring selection.When you arrive at the track, just turn the golden knob clockwise to change the stiffness of the shock to the race setting. Adjusting the shock to race mode changes all four areas of the damper; low and high-speed compression and rebound damping.The u00d6hlinsu00a0Road & Track team has extensively tested a wide variety of springs to find the perfect setup for an uncompromised dual-purpose coilover. With that, we recommend the listed spring rate that comes with these dampers (70N/mm Front, 80N/mm Rear).They are made out of light-weight aluminum and exceed ISO 9227 standards for corrosion and have a 2-year limited warranty.*All fitments are shown below*General FeaturesDFV technology (Dual Flow Valve)Height adjustableRebuildableCorrosion salt spray tested (ISO 9227)2-year limited warrantyFront:McPherson strut, upside downCompression and rebound damping with one adjusterSpring preload adjusterApprox. 20 mm lower than standard with recommended setupHeight adjustment range -15/+15 mmSpring rate 70 N/mmDustcoversUse with original top mountsRear:McPherson strut, upside downCompression and rebound damping with one adjusterSpring preload adjusterApprox. 20 mm lower than standard with recommended setupHeight adjustment range -15/+15 mmSpring rate 80 N/mmDustcoversUse with original top mountsThe u00d6hlins EDC Cancellation Kitu00a0(35020-07) for Road and Track deactivates dash lights and error codes when electronically adjustable OEM suspension is replaced with a mechanical system. The cancellation kit is plugged into the original suspension controls. No further programming is needed.Fitment: POU MP80981 - Cayman 2.7 (2014-16')981 - Cayman S 3.4 (2014-16')981 - Cayman GTS 3.4 (2014-16')982 - 718 Cayman 2.0 (2017-20')982 - 718 Cayman T 2.0 (2019-20')982 - 718 Cayman S 2.5 (2017-20')982 - 718 Cayman GTS 2.5 (2018-20')981 -u00a0Boxster 2.7 (2014-16')981 - Boxster S 3.4 (2014-16')981 - Boxster GTS 3.4 (2014-16')982 - 718 Boxster 2.0 (2017-20')982 - 718 Boxster T 2.0 (2019-20')982 - 718 Boxster S 2.5 (2017-20')982 - 718 Boxster GTS 2.5 (2018-20')make-porsche,make-porsche-model-boxster,make-porsche-model-boxster-chassis-981--2014-2016-,make-porsche-model-boxster-chassis-981--2014-2016--submodel-boxster--2-7l-,make-porsche-model-boxster-chassis-981--2014-2016--submodel-boxster-gts--3-4l-,make-porsche-model-boxster-chassis-981--2014-2016--submodel-boxster-s--3-4l-,make-porsche-model-cayman,make-porsche-model-cayman-chassis-981--2014-2016-,make-porsche-model-cayman-chassis-981--2014-2016--submodel-cayman--2-7l-,make-porsche-model-cayman-chassis-981--2014-2016--submodel-cayman-gts--3-4l-,make-porsche-model-cayman-chassis-981--2014-2016--submodel-cayman-s--3-4l- 4851006373911 4851006373911_33011495960599 BMW M235 Cup PFC V3 Direct Drive Rotors - Front 372.32.0050.453 https://hinzmotorsport.com/products/bmw-m235-cup-pfc-v3-direct-drive-rotors-front Performance Friction Brakes https://cdn.shopify.com/s/files/1/0045/1179/3186/products/PFCV3RotorsWebsite1_12def95d-6f7c-440e-8df6-e2509909f9ee.jpg?v=1610032374 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 9072 g 1 372.32.0050.453 - Left 449.95 Replacement V3 Disc/Ring Only - Does Not Include Hatufeff372x32mm V3 DiscPFC brake rotors are the absolute best rotors on the market. Years of testing and development went into the ultimate 2-piece floating rotor - PFC's V3 system.In road racing, a lot of passing is done under braking and a lot of time can be gained in the braking zones. Part of being able to brake later is having the confidence in the pedal to get the car stopped. PFC V3 rotors are a premium rotor and provide the performance, durability, and longevity to turn consistent fade-free laps.PFC Rotor castings go through intense heat cycles where the castings actually get pre-warped on purpose. The warped disc then goes through the final machining process, virtually eliminating any potential for warping on your car. PFC has put a lot of engineering effort into designing and testing their rotors. It shows as these rotors can be found on a ton of open-wheel cars running in the US, including IndyCars along with numerous Porsche and BMW track and race cars. More and more people are switching to PFC rotors for these ease of install/removal, performance, and outright cost-effectiveness. They simply outperform OEM and other competitors' rotors.With their innovative Snap-ring design, rotors can be replaced in seconds.Other Benefits Include:Reduced Unsprung WeightReduced Thermal Distortion and WarpingRunout of less than 0.0005" and 0.0002" thickness variation reduces vibrationReduced Heat Transfer to Hub AssemblyReduced DragReusable Hat Assembly (V3 not compatible with V2)Longer Life / Lower Cost Per LapReduced Weight Due to No Hardware (Only Snap Ring Required)No Rattle for Applications using Snap Ring*Notice* Recommended to be used with PFC pads only to ensure other pads do not have pad-to-rotor hat clearance issues. Please call/chat with us before placing an order if using another brand of pad. We will just need to verify the pad geometry.u00a0make-bmw,make-bmw-model-2-series,make-bmw-model-2-series-chassis-f22-23--2014--,make-bmw-model-2-series-chassis-f22-23--2014---submodel-m235-cup 4851006373911 4851006373911_33011495993367 BMW M235 Cup PFC V3 Direct Drive Rotors - Front 372.32.0050.463 https://hinzmotorsport.com/products/bmw-m235-cup-pfc-v3-direct-drive-rotors-front Performance Friction Brakes https://cdn.shopify.com/s/files/1/0045/1179/3186/products/PFCV3RotorsWebsite1_12def95d-6f7c-440e-8df6-e2509909f9ee.jpg?v=1610032374 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 9072 g 1 372.32.0050.463 - Right 449.95 Replacement V3 Disc/Ring Only - Does Not Include Hatufeff372x32mm V3 DiscPFC brake rotors are the absolute best rotors on the market. Years of testing and development went into the ultimate 2-piece floating rotor - PFC's V3 system.In road racing, a lot of passing is done under braking and a lot of time can be gained in the braking zones. Part of being able to brake later is having the confidence in the pedal to get the car stopped. PFC V3 rotors are a premium rotor and provide the performance, durability, and longevity to turn consistent fade-free laps.PFC Rotor castings go through intense heat cycles where the castings actually get pre-warped on purpose. The warped disc then goes through the final machining process, virtually eliminating any potential for warping on your car. PFC has put a lot of engineering effort into designing and testing their rotors. It shows as these rotors can be found on a ton of open-wheel cars running in the US, including IndyCars along with numerous Porsche and BMW track and race cars. More and more people are switching to PFC rotors for these ease of install/removal, performance, and outright cost-effectiveness. They simply outperform OEM and other competitors' rotors.With their innovative Snap-ring design, rotors can be replaced in seconds.Other Benefits Include:Reduced Unsprung WeightReduced Thermal Distortion and WarpingRunout of less than 0.0005" and 0.0002" thickness variation reduces vibrationReduced Heat Transfer to Hub AssemblyReduced DragReusable Hat Assembly (V3 not compatible with V2)Longer Life / Lower Cost Per LapReduced Weight Due to No Hardware (Only Snap Ring Required)No Rattle for Applications using Snap Ring*Notice* Recommended to be used with PFC pads only to ensure other pads do not have pad-to-rotor hat clearance issues. Please call/chat with us before placing an order if using another brand of pad. We will just need to verify the pad geometry.u00a0make-bmw,make-bmw-model-2-series,make-bmw-model-2-series-chassis-f22-23--2014--,make-bmw-model-2-series-chassis-f22-23--2014---submodel-m235-cup 4851006373911 4851006373911_33011497828375 BMW M235 Cup PFC V3 Direct Drive Rotors - Front 372.32.0050.453/372.32.0050.463 https://hinzmotorsport.com/products/bmw-m235-cup-pfc-v3-direct-drive-rotors-front Performance Friction Brakes https://cdn.shopify.com/s/files/1/0045/1179/3186/products/PFCV3RotorsWebsite1_12def95d-6f7c-440e-8df6-e2509909f9ee.jpg?v=1610032374 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 9072 g 1 Both Left & Right (Save $20) 899.90 879.90 Replacement V3 Disc/Ring Only - Does Not Include Hatufeff372x32mm V3 DiscPFC brake rotors are the absolute best rotors on the market. Years of testing and development went into the ultimate 2-piece floating rotor - PFC's V3 system.In road racing, a lot of passing is done under braking and a lot of time can be gained in the braking zones. Part of being able to brake later is having the confidence in the pedal to get the car stopped. PFC V3 rotors are a premium rotor and provide the performance, durability, and longevity to turn consistent fade-free laps.PFC Rotor castings go through intense heat cycles where the castings actually get pre-warped on purpose. The warped disc then goes through the final machining process, virtually eliminating any potential for warping on your car. PFC has put a lot of engineering effort into designing and testing their rotors. It shows as these rotors can be found on a ton of open-wheel cars running in the US, including IndyCars along with numerous Porsche and BMW track and race cars. More and more people are switching to PFC rotors for these ease of install/removal, performance, and outright cost-effectiveness. They simply outperform OEM and other competitors' rotors.With their innovative Snap-ring design, rotors can be replaced in seconds.Other Benefits Include:Reduced Unsprung WeightReduced Thermal Distortion and WarpingRunout of less than 0.0005" and 0.0002" thickness variation reduces vibrationReduced Heat Transfer to Hub AssemblyReduced DragReusable Hat Assembly (V3 not compatible with V2)Longer Life / Lower Cost Per LapReduced Weight Due to No Hardware (Only Snap Ring Required)No Rattle for Applications using Snap Ring*Notice* Recommended to be used with PFC pads only to ensure other pads do not have pad-to-rotor hat clearance issues. Please call/chat with us before placing an order if using another brand of pad. We will just need to verify the pad geometry.u00a0make-bmw,make-bmw-model-2-series,make-bmw-model-2-series-chassis-f22-23--2014--,make-bmw-model-2-series-chassis-f22-23--2014---submodel-m235-cup 4851004801047 4851004801047_33011493961751 BMW E82 1M PFC V3 Direct Drive Rotors - Front 357.062.63 https://hinzmotorsport.com/products/bmw-e82-1m-pfc-v3-direct-drive-rotors-front Performance Friction Brakes https://cdn.shopify.com/s/files/1/0045/1179/3186/products/PFCV3RotorsWebsite1_44c3796c-d441-4da4-8b83-1a3db0041ed5.jpg?v=1610031943 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 9072 g 1 357.062.63 - Left 569.95 PFC brake rotors are the absolute best rotors on the market. Years of testing and development went into the ultimate 2-piece floating rotor - PFC's V3 system.In road racing, a lot of passing is done under braking and a lot of time can be gained in the braking zones. Part of being able to brake later is having the confidence in the pedal to get the car stopped. PFC V3 rotors are a premium rotor and provide the performance, durability, and longevity to turn consistent fade-free laps.PFC Rotor castings go through intense heat cycles where the castings actually get pre-warped on purpose. The warped disc then goes through the final machining process, virtually eliminating any potential for warping on your car. PFC has put a lot of engineering effort into designing and testing their rotors. It shows as these rotors can be found on a ton of open-wheel cars running in the US, including IndyCars along with numerous Porsche and BMW track and race cars. More and more people are switching to PFC rotors for these ease of install/removal, performance, and outright cost-effectiveness. They simply outperform OEM and other competitors' rotors.With their innovative Snap-ring design, rotors can be replaced in seconds.Other Benefits Include:Reduced Unsprung WeightReduced Thermal Distortion and WarpingRunout of less than 0.0005" and 0.0002" thickness variation reduces vibrationReduced Heat Transfer to Hub AssemblyReduced DragReusable Hat Assembly (V3 not compatible with V2)Longer Life / Lower Cost Per LapReduced Weight Due to No Hardware (Only Snap Ring Required)No Rattle for Applications using Snap Ring*Notice* Recommended to be used with PFC pads only to ensure other pads do not have pad-to-rotor hat clearance issues. Please call/chat with us before placing an order if using another brand of pad. We will just need to verify the pad geometry.u00a0make-bmw,make-bmw-model-1-series,make-bmw-model-1-series-chassis-e82--2008-13-,make-bmw-model-1-series-chassis-e82--2008-13--submodel-1m 4851004801047 4851004801047_33011493994519 BMW E82 1M PFC V3 Direct Drive Rotors - Front 357.062.64 https://hinzmotorsport.com/products/bmw-e82-1m-pfc-v3-direct-drive-rotors-front Performance Friction Brakes https://cdn.shopify.com/s/files/1/0045/1179/3186/products/PFCV3RotorsWebsite1_44c3796c-d441-4da4-8b83-1a3db0041ed5.jpg?v=1610031943 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 9072 g 1 357.062.64 - Right 569.95 PFC brake rotors are the absolute best rotors on the market. Years of testing and development went into the ultimate 2-piece floating rotor - PFC's V3 system.In road racing, a lot of passing is done under braking and a lot of time can be gained in the braking zones. Part of being able to brake later is having the confidence in the pedal to get the car stopped. PFC V3 rotors are a premium rotor and provide the performance, durability, and longevity to turn consistent fade-free laps.PFC Rotor castings go through intense heat cycles where the castings actually get pre-warped on purpose. The warped disc then goes through the final machining process, virtually eliminating any potential for warping on your car. PFC has put a lot of engineering effort into designing and testing their rotors. It shows as these rotors can be found on a ton of open-wheel cars running in the US, including IndyCars along with numerous Porsche and BMW track and race cars. More and more people are switching to PFC rotors for these ease of install/removal, performance, and outright cost-effectiveness. They simply outperform OEM and other competitors' rotors.With their innovative Snap-ring design, rotors can be replaced in seconds.Other Benefits Include:Reduced Unsprung WeightReduced Thermal Distortion and WarpingRunout of less than 0.0005" and 0.0002" thickness variation reduces vibrationReduced Heat Transfer to Hub AssemblyReduced DragReusable Hat Assembly (V3 not compatible with V2)Longer Life / Lower Cost Per LapReduced Weight Due to No Hardware (Only Snap Ring Required)No Rattle for Applications using Snap Ring*Notice* Recommended to be used with PFC pads only to ensure other pads do not have pad-to-rotor hat clearance issues. Please call/chat with us before placing an order if using another brand of pad. We will just need to verify the pad geometry.u00a0make-bmw,make-bmw-model-1-series,make-bmw-model-1-series-chassis-e82--2008-13-,make-bmw-model-1-series-chassis-e82--2008-13--submodel-1m 4851004801047 4851004801047_33011494027287 BMW E82 1M PFC V3 Direct Drive Rotors - Front 357.062.63/357.062.64 https://hinzmotorsport.com/products/bmw-e82-1m-pfc-v3-direct-drive-rotors-front Performance Friction Brakes https://cdn.shopify.com/s/files/1/0045/1179/3186/products/PFCV3RotorsWebsite1_44c3796c-d441-4da4-8b83-1a3db0041ed5.jpg?v=1610031943 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 9072 g 1 Both Left & Right (Save $25.00) 1,139.90 1,114.90 PFC brake rotors are the absolute best rotors on the market. Years of testing and development went into the ultimate 2-piece floating rotor - PFC's V3 system.In road racing, a lot of passing is done under braking and a lot of time can be gained in the braking zones. Part of being able to brake later is having the confidence in the pedal to get the car stopped. PFC V3 rotors are a premium rotor and provide the performance, durability, and longevity to turn consistent fade-free laps.PFC Rotor castings go through intense heat cycles where the castings actually get pre-warped on purpose. The warped disc then goes through the final machining process, virtually eliminating any potential for warping on your car. PFC has put a lot of engineering effort into designing and testing their rotors. It shows as these rotors can be found on a ton of open-wheel cars running in the US, including IndyCars along with numerous Porsche and BMW track and race cars. More and more people are switching to PFC rotors for these ease of install/removal, performance, and outright cost-effectiveness. They simply outperform OEM and other competitors' rotors.With their innovative Snap-ring design, rotors can be replaced in seconds.Other Benefits Include:Reduced Unsprung WeightReduced Thermal Distortion and WarpingRunout of less than 0.0005" and 0.0002" thickness variation reduces vibrationReduced Heat Transfer to Hub AssemblyReduced DragReusable Hat Assembly (V3 not compatible with V2)Longer Life / Lower Cost Per LapReduced Weight Due to No Hardware (Only Snap Ring Required)No Rattle for Applications using Snap Ring*Notice* Recommended to be used with PFC pads only to ensure other pads do not have pad-to-rotor hat clearance issues. Please call/chat with us before placing an order if using another brand of pad. We will just need to verify the pad geometry.u00a0make-bmw,make-bmw-model-1-series,make-bmw-model-1-series-chassis-e82--2008-13-,make-bmw-model-1-series-chassis-e82--2008-13--submodel-1m 4851002277911 4851002277911_33011489964055 BMW E90, E92, E93 M3 PFC V3 Direct Drive Rotors - Front 357.062.63 https://hinzmotorsport.com/products/bmw-e90-e92-e93-m3-pfc-v3-direct-drive-rotors-front Performance Friction Brakes https://cdn.shopify.com/s/files/1/0045/1179/3186/products/PFCV3RotorsWebsite1_47db59dc-d65d-4300-9ebe-9820867d21e2.jpg?v=1610031119 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 9072 g 1 357.062.63 - Left 569.95 PFC brake rotors are the absolute best rotors on the market. Years of testing and development went into the ultimate 2-piece floating rotor - PFC's V3 system.In road racing, a lot of passing is done under braking and a lot of time can be gained in the braking zones. Part of being able to brake later is having the confidence in the pedal to get the car stopped. PFC V3 rotors are a premium rotor and provide the performance, durability, and longevity to turn consistent fade-free laps.PFC Rotor castings go through intense heat cycles where the castings actually get pre-warped on purpose. The warped disc then goes through the final machining process, virtually eliminating any potential for warping on your car. PFC has put a lot of engineering effort into designing and testing their rotors. It shows as these rotors can be found on a ton of open-wheel cars running in the US, including IndyCars along with numerous Porsche and BMW track and race cars. More and more people are switching to PFC rotors for these ease of install/removal, performance, and outright cost-effectiveness. They simply outperform OEM and other competitors' rotors.With their innovative Snap-ring design, rotors can be replaced in seconds.Other Benefits Include:Reduced Unsprung WeightReduced Thermal Distortion and WarpingRunout of less than 0.0005" and 0.0002" thickness variation reduces vibrationReduced Heat Transfer to Hub AssemblyReduced DragReusable Hat Assembly (V3 not compatible with V2)Longer Life / Lower Cost Per LapReduced Weight Due to No Hardware (Only Snap Ring Required)No Rattle for Applications using Snap Ring*Notice* Recommended to be used with PFC pads only to ensure other pads do not have pad-to-rotor hat clearance issues. Please call/chat with us before placing an order if using another brand of pad. We will just need to verify the pad geometry.u00a0make-bmw,make-bmw-model-3-series,make-bmw-model-3-series-chassis-e90-e92-e93--2006-13-,make-bmw-model-3-series-chassis-e90-e92-e93--2006-13--submodel-m3 4851002277911 4851002277911_33011489996823 BMW E90, E92, E93 M3 PFC V3 Direct Drive Rotors - Front 357.062.64 https://hinzmotorsport.com/products/bmw-e90-e92-e93-m3-pfc-v3-direct-drive-rotors-front Performance Friction Brakes https://cdn.shopify.com/s/files/1/0045/1179/3186/products/PFCV3RotorsWebsite1_47db59dc-d65d-4300-9ebe-9820867d21e2.jpg?v=1610031119 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 9072 g 1 357.062.64 - Right 569.95 PFC brake rotors are the absolute best rotors on the market. Years of testing and development went into the ultimate 2-piece floating rotor - PFC's V3 system.In road racing, a lot of passing is done under braking and a lot of time can be gained in the braking zones. Part of being able to brake later is having the confidence in the pedal to get the car stopped. PFC V3 rotors are a premium rotor and provide the performance, durability, and longevity to turn consistent fade-free laps.PFC Rotor castings go through intense heat cycles where the castings actually get pre-warped on purpose. The warped disc then goes through the final machining process, virtually eliminating any potential for warping on your car. PFC has put a lot of engineering effort into designing and testing their rotors. It shows as these rotors can be found on a ton of open-wheel cars running in the US, including IndyCars along with numerous Porsche and BMW track and race cars. More and more people are switching to PFC rotors for these ease of install/removal, performance, and outright cost-effectiveness. They simply outperform OEM and other competitors' rotors.With their innovative Snap-ring design, rotors can be replaced in seconds.Other Benefits Include:Reduced Unsprung WeightReduced Thermal Distortion and WarpingRunout of less than 0.0005" and 0.0002" thickness variation reduces vibrationReduced Heat Transfer to Hub AssemblyReduced DragReusable Hat Assembly (V3 not compatible with V2)Longer Life / Lower Cost Per LapReduced Weight Due to No Hardware (Only Snap Ring Required)No Rattle for Applications using Snap Ring*Notice* Recommended to be used with PFC pads only to ensure other pads do not have pad-to-rotor hat clearance issues. Please call/chat with us before placing an order if using another brand of pad. We will just need to verify the pad geometry.u00a0make-bmw,make-bmw-model-3-series,make-bmw-model-3-series-chassis-e90-e92-e93--2006-13-,make-bmw-model-3-series-chassis-e90-e92-e93--2006-13--submodel-m3 4851002277911 4851002277911_33011492290583 BMW E90, E92, E93 M3 PFC V3 Direct Drive Rotors - Front 357.062.63/357.062.64 https://hinzmotorsport.com/products/bmw-e90-e92-e93-m3-pfc-v3-direct-drive-rotors-front Performance Friction Brakes https://cdn.shopify.com/s/files/1/0045/1179/3186/products/PFCV3RotorsWebsite1_47db59dc-d65d-4300-9ebe-9820867d21e2.jpg?v=1610031119 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 9072 g 1 Both Left & Right (Save $25.00) 1,139.90 1,114.90 PFC brake rotors are the absolute best rotors on the market. Years of testing and development went into the ultimate 2-piece floating rotor - PFC's V3 system.In road racing, a lot of passing is done under braking and a lot of time can be gained in the braking zones. Part of being able to brake later is having the confidence in the pedal to get the car stopped. PFC V3 rotors are a premium rotor and provide the performance, durability, and longevity to turn consistent fade-free laps.PFC Rotor castings go through intense heat cycles where the castings actually get pre-warped on purpose. The warped disc then goes through the final machining process, virtually eliminating any potential for warping on your car. PFC has put a lot of engineering effort into designing and testing their rotors. It shows as these rotors can be found on a ton of open-wheel cars running in the US, including IndyCars along with numerous Porsche and BMW track and race cars. More and more people are switching to PFC rotors for these ease of install/removal, performance, and outright cost-effectiveness. They simply outperform OEM and other competitors' rotors.With their innovative Snap-ring design, rotors can be replaced in seconds.Other Benefits Include:Reduced Unsprung WeightReduced Thermal Distortion and WarpingRunout of less than 0.0005" and 0.0002" thickness variation reduces vibrationReduced Heat Transfer to Hub AssemblyReduced DragReusable Hat Assembly (V3 not compatible with V2)Longer Life / Lower Cost Per LapReduced Weight Due to No Hardware (Only Snap Ring Required)No Rattle for Applications using Snap Ring*Notice* Recommended to be used with PFC pads only to ensure other pads do not have pad-to-rotor hat clearance issues. Please call/chat with us before placing an order if using another brand of pad. We will just need to verify the pad geometry.u00a0make-bmw,make-bmw-model-3-series,make-bmw-model-3-series-chassis-e90-e92-e93--2006-13-,make-bmw-model-3-series-chassis-e90-e92-e93--2006-13--submodel-m3 4851001196567 4851001196567_33011488489495 BMW E46 M3 PFC V3 Direct Drive Rotors - Front 322.053.63 https://hinzmotorsport.com/products/bmw-e46-m3-pfc-v3-direct-drive-rotors-front Performance Friction Brakes https://cdn.shopify.com/s/files/1/0045/1179/3186/products/PFCV3RotorsWebsite1_4f730d23-21ac-4b2f-88e1-350c7681b0df.jpg?v=1610030676 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 9072 g 1 322.053.63 - Left 474.99 *Does not fit CSL or ZCP Models*PFC brake rotors are the absolute best rotors on the market. Years of testing and development went into the ultimate 2-piece floating rotor - PFC's V3 system.In road racing, a lot of passing is done under braking and a lot of time can be gained in the braking zones. Part of being able to brake later is having the confidence in the pedal to get the car stopped. PFC V3 rotors are a premium rotor and provide the performance, durability, and longevity to turn consistent fade-free laps.PFC Rotor castings go through intense heat cycles where the castings actually get pre-warped on purpose. The warped disc then goes through the final machining process, virtually eliminating any potential for warping on your car. PFC has put a lot of engineering effort into designing and testing their rotors. It shows as these rotors can be found on a ton of open-wheel cars running in the US, including IndyCars along with numerous Porsche and BMW track and race cars. More and more people are switching to PFC rotors for these ease of install/removal, performance, and outright cost-effectiveness. They simply outperform OEM and other competitors' rotors.With their innovative Snap-ring design, rotors can be replaced in seconds.Other Benefits Include:Reduced Unsprung WeightReduced Thermal Distortion and WarpingRunout of less than 0.0005" and 0.0002" thickness variation reduces vibrationReduced Heat Transfer to Hub AssemblyReduced DragReusable Hat Assembly (V3 not compatible with V2)Longer Life / Lower Cost Per LapReduced Weight Due to No Hardware (Only Snap Ring Required)No Rattle for Applications using Snap Ring*Notice* Recommended to be used with PFC pads only to ensure other pads do not have pad-to-rotor hat clearance issues. Please call/chat with us before placing an order if using another brand of pad. We will just need to verify the pad geometry.u00a0make-bmw,make-bmw-model-3-series,make-bmw-model-3-series-chassis-e46--99-05-,make-bmw-model-3-series-chassis-e46--99-05--submodel-m3 4851001196567 4851001196567_33011488522263 BMW E46 M3 PFC V3 Direct Drive Rotors - Front 322.053.64 https://hinzmotorsport.com/products/bmw-e46-m3-pfc-v3-direct-drive-rotors-front Performance Friction Brakes https://cdn.shopify.com/s/files/1/0045/1179/3186/products/PFCV3RotorsWebsite1_4f730d23-21ac-4b2f-88e1-350c7681b0df.jpg?v=1610030676 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 9072 g 1 322.053.64 - Right 474.99 *Does not fit CSL or ZCP Models*PFC brake rotors are the absolute best rotors on the market. Years of testing and development went into the ultimate 2-piece floating rotor - PFC's V3 system.In road racing, a lot of passing is done under braking and a lot of time can be gained in the braking zones. Part of being able to brake later is having the confidence in the pedal to get the car stopped. PFC V3 rotors are a premium rotor and provide the performance, durability, and longevity to turn consistent fade-free laps.PFC Rotor castings go through intense heat cycles where the castings actually get pre-warped on purpose. The warped disc then goes through the final machining process, virtually eliminating any potential for warping on your car. PFC has put a lot of engineering effort into designing and testing their rotors. It shows as these rotors can be found on a ton of open-wheel cars running in the US, including IndyCars along with numerous Porsche and BMW track and race cars. More and more people are switching to PFC rotors for these ease of install/removal, performance, and outright cost-effectiveness. They simply outperform OEM and other competitors' rotors.With their innovative Snap-ring design, rotors can be replaced in seconds.Other Benefits Include:Reduced Unsprung WeightReduced Thermal Distortion and WarpingRunout of less than 0.0005" and 0.0002" thickness variation reduces vibrationReduced Heat Transfer to Hub AssemblyReduced DragReusable Hat Assembly (V3 not compatible with V2)Longer Life / Lower Cost Per LapReduced Weight Due to No Hardware (Only Snap Ring Required)No Rattle for Applications using Snap Ring*Notice* Recommended to be used with PFC pads only to ensure other pads do not have pad-to-rotor hat clearance issues. Please call/chat with us before placing an order if using another brand of pad. We will just need to verify the pad geometry.u00a0make-bmw,make-bmw-model-3-series,make-bmw-model-3-series-chassis-e46--99-05-,make-bmw-model-3-series-chassis-e46--99-05--submodel-m3 4850998902807 4850998902807_33011487539223 BMW E36 M3 PFC V3 Direct Drive Rotors - Front 311.053.63 https://hinzmotorsport.com/products/bmw-e36-e46-m3-pfc-v3-direct-drive-rotors-front Performance Friction Brakes https://cdn.shopify.com/s/files/1/0045/1179/3186/products/PFCV3RotorsWebsite1_98655e4a-fb11-4c0a-bdbb-3dd8e1355c0e.jpg?v=1610029724 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 9072 g 1 311.053.63 - Left 398.99 PFC brake rotors are the absolute best rotors on the market. Years of testing and development went into the ultimate 2-piece floating rotor - PFC's V3 system.In road racing, a lot of passing is done under braking and a lot of time can be gained in the braking zones. Part of being able to brake later is having the confidence in the pedal to get the car stopped. PFC V3 rotors are a premium rotor and provide the performance, durability, and longevity to turn consistent fade-free laps.PFC Rotor castings go through intense heat cycles where the castings actually get pre-warped on purpose. The warped disc then goes through the final machining process, virtually eliminating any potential for warping on your car. PFC has put a lot of engineering effort into designing and testing their rotors. It shows as these rotors can be found on a ton of open-wheel cars running in the US, including IndyCars along with numerous Porsche and BMW track and race cars. More and more people are switching to PFC rotors for these ease of install/removal, performance, and outright cost-effectiveness. They simply outperform OEM and other competitors' rotors.With their innovative Snap-ring design, rotors can be replaced in seconds.Other Benefits Include:Reduced Unsprung WeightReduced Thermal Distortion and WarpingRunout of less than 0.0005" and 0.0002" thickness variation reduces vibrationReduced Heat Transfer to Hub AssemblyReduced DragReusable Hat Assembly (V3 not compatible with V2)Longer Life / Lower Cost Per LapReduced Weight Due to No Hardware (Only Snap Ring Required)No Rattle for Applications using Snap Ring*Notice* Recommended to be used with PFC pads only to ensure other pads do not have pad-to-rotor hat clearance issues. Please call/chat with us before placing an order if using another brand of pad. We will just need to verify the pad geometry.u00a0make-bmw,make-bmw-model-3-series,make-bmw-model-3-series-chassis-e36--92-99-,make-bmw-model-3-series-chassis-e36--92-99--submodel-m3--1995-,make-bmw-model-3-series-chassis-e36--92-99--submodel-m3--96-99- 4850998902807 4850998902807_33011487571991 BMW E36 M3 PFC V3 Direct Drive Rotors - Front 311.053.64 https://hinzmotorsport.com/products/bmw-e36-e46-m3-pfc-v3-direct-drive-rotors-front Performance Friction Brakes https://cdn.shopify.com/s/files/1/0045/1179/3186/products/PFCV3RotorsWebsite1_98655e4a-fb11-4c0a-bdbb-3dd8e1355c0e.jpg?v=1610029724 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 9072 g 1 311.053.64 - Right 398.99 PFC brake rotors are the absolute best rotors on the market. Years of testing and development went into the ultimate 2-piece floating rotor - PFC's V3 system.In road racing, a lot of passing is done under braking and a lot of time can be gained in the braking zones. Part of being able to brake later is having the confidence in the pedal to get the car stopped. PFC V3 rotors are a premium rotor and provide the performance, durability, and longevity to turn consistent fade-free laps.PFC Rotor castings go through intense heat cycles where the castings actually get pre-warped on purpose. The warped disc then goes through the final machining process, virtually eliminating any potential for warping on your car. PFC has put a lot of engineering effort into designing and testing their rotors. It shows as these rotors can be found on a ton of open-wheel cars running in the US, including IndyCars along with numerous Porsche and BMW track and race cars. More and more people are switching to PFC rotors for these ease of install/removal, performance, and outright cost-effectiveness. They simply outperform OEM and other competitors' rotors.With their innovative Snap-ring design, rotors can be replaced in seconds.Other Benefits Include:Reduced Unsprung WeightReduced Thermal Distortion and WarpingRunout of less than 0.0005" and 0.0002" thickness variation reduces vibrationReduced Heat Transfer to Hub AssemblyReduced DragReusable Hat Assembly (V3 not compatible with V2)Longer Life / Lower Cost Per LapReduced Weight Due to No Hardware (Only Snap Ring Required)No Rattle for Applications using Snap Ring*Notice* Recommended to be used with PFC pads only to ensure other pads do not have pad-to-rotor hat clearance issues. Please call/chat with us before placing an order if using another brand of pad. We will just need to verify the pad geometry.u00a0make-bmw,make-bmw-model-3-series,make-bmw-model-3-series-chassis-e36--92-99-,make-bmw-model-3-series-chassis-e36--92-99--submodel-m3--1995-,make-bmw-model-3-series-chassis-e36--92-99--submodel-m3--96-99- 4850693373975 4850693373975_33010616926231 Porsche 986/987 Boxster/Cayman Camber Plates ccpboxman-1 https://hinzmotorsport.com/products/porsche-986-987-boxster-cayman-camber-plates Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/Porsche993CamberPlates_1ad152e6-911b-4568-ac3a-3a827696d8d1.jpg?v=1609957074 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 Stock Stock 499.00 Porsche 986/987 Boxster/Cayman Camber Platesu00a0Whether you are looking to add more fender clearance for wider wheels and tires, improve the handling of your car, or both, camber plates are the perfect solution.We have been running Ground Control camber/caster plates on our car for over three years now with 40,000+ street and 1,000+ track miles on them. These have held up amazingly well and do not have any increased NVH at all.The Ground Control STREET/SPORT plate, a special version of our camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control.Camber plates are anodized and the rest of the components are zinc plated for corrosion resistance.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for roughly 3 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL.Configuration options include 2.25", 2.50", 60mm, 70mm or Stock springs, low profile dome or standard dome plates, and a Poly spring bushing.Lifetime guarantee on these camber plates, not including bearings.*Subframe and chassis variations affect total camber gain (up to 16mm negative camber possible)**The included Ground Control nut must be used with these camber plates!**Torque camber plate mounting nuts to 18ft-lbs using a properly calibrated torque wrench. Pneumatic/electric impact gun not recommended.u00a0make-porsche,make-porsche-model-boxster,make-porsche-model-boxster-chassis-986--1997-2004-,make-porsche-model-boxster-chassis-986--1997-2004--submodel-boxster--2-5l-,make-porsche-model-boxster-chassis-986--1997-2004--submodel-boxster--2-7l-,make-porsche-model-boxster-chassis-986--1997-2004--submodel-boxster-s--3-2l-,make-porsche-model-boxster-chassis-987--2005-2008-,make-porsche-model-boxster-chassis-987--2005-2008--submodel-boxster--2-7l-,make-porsche-model-boxster-chassis-987--2005-2008--submodel-boxster-s--3-2l-,make-porsche-model-boxster-chassis-987--2005-2008--submodel-boxster-s--3-4l-,make-porsche-model-boxster-chassis-987-2--2009-2012-,make-porsche-model-boxster-chassis-987-2--2009-2012--submodel-boxster--2-9l-,make-porsche-model-boxster-chassis-987-2--2009-2012--submodel-boxster-s--3-4l-,make-porsche-model-cayman,make-porsche-model-cayman-chassis-987--2005-2008-,make-porsche-model-cayman-chassis-987--2005-2008--submodel-cayman--2-7l-,make-porsche-model-cayman-chassis-987--2005-2008--submodel-cayman-s--3-4l-,make-porsche-model-cayman-chassis-987-2--2009-2012-,make-porsche-model-cayman-chassis-987-2--2009-2012--submodel-cayman--2-9l-,make-porsche-model-cayman-chassis-987-2--2009-2012--submodel-cayman-r--3-4l-,make-porsche-model-cayman-chassis-987-2--2009-2012--submodel-cayman-s--3-4l- 4850693373975 4850693373975_33010616893463 Porsche 986/987 Boxster/Cayman Camber Plates ccpboxman-1 https://hinzmotorsport.com/products/porsche-986-987-boxster-cayman-camber-plates Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/Porsche993CamberPlates_1ad152e6-911b-4568-ac3a-3a827696d8d1.jpg?v=1609957074 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 Stock 60mm 499.00 Porsche 986/987 Boxster/Cayman Camber Platesu00a0Whether you are looking to add more fender clearance for wider wheels and tires, improve the handling of your car, or both, camber plates are the perfect solution.We have been running Ground Control camber/caster plates on our car for over three years now with 40,000+ street and 1,000+ track miles on them. These have held up amazingly well and do not have any increased NVH at all.The Ground Control STREET/SPORT plate, a special version of our camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control.Camber plates are anodized and the rest of the components are zinc plated for corrosion resistance.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for roughly 3 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL.Configuration options include 2.25", 2.50", 60mm, 70mm or Stock springs, low profile dome or standard dome plates, and a Poly spring bushing.Lifetime guarantee on these camber plates, not including bearings.*Subframe and chassis variations affect total camber gain (up to 16mm negative camber possible)**The included Ground Control nut must be used with these camber plates!**Torque camber plate mounting nuts to 18ft-lbs using a properly calibrated torque wrench. Pneumatic/electric impact gun not recommended.u00a0make-porsche,make-porsche-model-boxster,make-porsche-model-boxster-chassis-986--1997-2004-,make-porsche-model-boxster-chassis-986--1997-2004--submodel-boxster--2-5l-,make-porsche-model-boxster-chassis-986--1997-2004--submodel-boxster--2-7l-,make-porsche-model-boxster-chassis-986--1997-2004--submodel-boxster-s--3-2l-,make-porsche-model-boxster-chassis-987--2005-2008-,make-porsche-model-boxster-chassis-987--2005-2008--submodel-boxster--2-7l-,make-porsche-model-boxster-chassis-987--2005-2008--submodel-boxster-s--3-2l-,make-porsche-model-boxster-chassis-987--2005-2008--submodel-boxster-s--3-4l-,make-porsche-model-boxster-chassis-987-2--2009-2012-,make-porsche-model-boxster-chassis-987-2--2009-2012--submodel-boxster--2-9l-,make-porsche-model-boxster-chassis-987-2--2009-2012--submodel-boxster-s--3-4l-,make-porsche-model-cayman,make-porsche-model-cayman-chassis-987--2005-2008-,make-porsche-model-cayman-chassis-987--2005-2008--submodel-cayman--2-7l-,make-porsche-model-cayman-chassis-987--2005-2008--submodel-cayman-s--3-4l-,make-porsche-model-cayman-chassis-987-2--2009-2012-,make-porsche-model-cayman-chassis-987-2--2009-2012--submodel-cayman--2-9l-,make-porsche-model-cayman-chassis-987-2--2009-2012--submodel-cayman-r--3-4l-,make-porsche-model-cayman-chassis-987-2--2009-2012--submodel-cayman-s--3-4l- 4850693373975 4850693373975_33010616958999 Porsche 986/987 Boxster/Cayman Camber Plates ccpboxman-1 https://hinzmotorsport.com/products/porsche-986-987-boxster-cayman-camber-plates Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/Porsche993CamberPlates_1ad152e6-911b-4568-ac3a-3a827696d8d1.jpg?v=1609957074 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 Stock 70mm 499.00 Porsche 986/987 Boxster/Cayman Camber Platesu00a0Whether you are looking to add more fender clearance for wider wheels and tires, improve the handling of your car, or both, camber plates are the perfect solution.We have been running Ground Control camber/caster plates on our car for over three years now with 40,000+ street and 1,000+ track miles on them. These have held up amazingly well and do not have any increased NVH at all.The Ground Control STREET/SPORT plate, a special version of our camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control.Camber plates are anodized and the rest of the components are zinc plated for corrosion resistance.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for roughly 3 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL.Configuration options include 2.25", 2.50", 60mm, 70mm or Stock springs, low profile dome or standard dome plates, and a Poly spring bushing.Lifetime guarantee on these camber plates, not including bearings.*Subframe and chassis variations affect total camber gain (up to 16mm negative camber possible)**The included Ground Control nut must be used with these camber plates!**Torque camber plate mounting nuts to 18ft-lbs using a properly calibrated torque wrench. Pneumatic/electric impact gun not recommended.u00a0make-porsche,make-porsche-model-boxster,make-porsche-model-boxster-chassis-986--1997-2004-,make-porsche-model-boxster-chassis-986--1997-2004--submodel-boxster--2-5l-,make-porsche-model-boxster-chassis-986--1997-2004--submodel-boxster--2-7l-,make-porsche-model-boxster-chassis-986--1997-2004--submodel-boxster-s--3-2l-,make-porsche-model-boxster-chassis-987--2005-2008-,make-porsche-model-boxster-chassis-987--2005-2008--submodel-boxster--2-7l-,make-porsche-model-boxster-chassis-987--2005-2008--submodel-boxster-s--3-2l-,make-porsche-model-boxster-chassis-987--2005-2008--submodel-boxster-s--3-4l-,make-porsche-model-boxster-chassis-987-2--2009-2012-,make-porsche-model-boxster-chassis-987-2--2009-2012--submodel-boxster--2-9l-,make-porsche-model-boxster-chassis-987-2--2009-2012--submodel-boxster-s--3-4l-,make-porsche-model-cayman,make-porsche-model-cayman-chassis-987--2005-2008-,make-porsche-model-cayman-chassis-987--2005-2008--submodel-cayman--2-7l-,make-porsche-model-cayman-chassis-987--2005-2008--submodel-cayman-s--3-4l-,make-porsche-model-cayman-chassis-987-2--2009-2012-,make-porsche-model-cayman-chassis-987-2--2009-2012--submodel-cayman--2-9l-,make-porsche-model-cayman-chassis-987-2--2009-2012--submodel-cayman-r--3-4l-,make-porsche-model-cayman-chassis-987-2--2009-2012--submodel-cayman-s--3-4l- 4850693373975 4850693373975_33010616991767 Porsche 986/987 Boxster/Cayman Camber Plates ccpboxman-1 https://hinzmotorsport.com/products/porsche-986-987-boxster-cayman-camber-plates Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/Porsche993CamberPlates_1ad152e6-911b-4568-ac3a-3a827696d8d1.jpg?v=1609957074 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 Stock 2.25" 499.00 Porsche 986/987 Boxster/Cayman Camber Platesu00a0Whether you are looking to add more fender clearance for wider wheels and tires, improve the handling of your car, or both, camber plates are the perfect solution.We have been running Ground Control camber/caster plates on our car for over three years now with 40,000+ street and 1,000+ track miles on them. These have held up amazingly well and do not have any increased NVH at all.The Ground Control STREET/SPORT plate, a special version of our camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control.Camber plates are anodized and the rest of the components are zinc plated for corrosion resistance.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for roughly 3 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL.Configuration options include 2.25", 2.50", 60mm, 70mm or Stock springs, low profile dome or standard dome plates, and a Poly spring bushing.Lifetime guarantee on these camber plates, not including bearings.*Subframe and chassis variations affect total camber gain (up to 16mm negative camber possible)**The included Ground Control nut must be used with these camber plates!**Torque camber plate mounting nuts to 18ft-lbs using a properly calibrated torque wrench. Pneumatic/electric impact gun not recommended.u00a0make-porsche,make-porsche-model-boxster,make-porsche-model-boxster-chassis-986--1997-2004-,make-porsche-model-boxster-chassis-986--1997-2004--submodel-boxster--2-5l-,make-porsche-model-boxster-chassis-986--1997-2004--submodel-boxster--2-7l-,make-porsche-model-boxster-chassis-986--1997-2004--submodel-boxster-s--3-2l-,make-porsche-model-boxster-chassis-987--2005-2008-,make-porsche-model-boxster-chassis-987--2005-2008--submodel-boxster--2-7l-,make-porsche-model-boxster-chassis-987--2005-2008--submodel-boxster-s--3-2l-,make-porsche-model-boxster-chassis-987--2005-2008--submodel-boxster-s--3-4l-,make-porsche-model-boxster-chassis-987-2--2009-2012-,make-porsche-model-boxster-chassis-987-2--2009-2012--submodel-boxster--2-9l-,make-porsche-model-boxster-chassis-987-2--2009-2012--submodel-boxster-s--3-4l-,make-porsche-model-cayman,make-porsche-model-cayman-chassis-987--2005-2008-,make-porsche-model-cayman-chassis-987--2005-2008--submodel-cayman--2-7l-,make-porsche-model-cayman-chassis-987--2005-2008--submodel-cayman-s--3-4l-,make-porsche-model-cayman-chassis-987-2--2009-2012-,make-porsche-model-cayman-chassis-987-2--2009-2012--submodel-cayman--2-9l-,make-porsche-model-cayman-chassis-987-2--2009-2012--submodel-cayman-r--3-4l-,make-porsche-model-cayman-chassis-987-2--2009-2012--submodel-cayman-s--3-4l- 4850693373975 4850693373975_33010617090071 Porsche 986/987 Boxster/Cayman Camber Plates ccpboxman-1 https://hinzmotorsport.com/products/porsche-986-987-boxster-cayman-camber-plates Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/Porsche993CamberPlates_1ad152e6-911b-4568-ac3a-3a827696d8d1.jpg?v=1609957074 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 AST Stock 499.00 Porsche 986/987 Boxster/Cayman Camber Platesu00a0Whether you are looking to add more fender clearance for wider wheels and tires, improve the handling of your car, or both, camber plates are the perfect solution.We have been running Ground Control camber/caster plates on our car for over three years now with 40,000+ street and 1,000+ track miles on them. These have held up amazingly well and do not have any increased NVH at all.The Ground Control STREET/SPORT plate, a special version of our camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control.Camber plates are anodized and the rest of the components are zinc plated for corrosion resistance.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for roughly 3 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL.Configuration options include 2.25", 2.50", 60mm, 70mm or Stock springs, low profile dome or standard dome plates, and a Poly spring bushing.Lifetime guarantee on these camber plates, not including bearings.*Subframe and chassis variations affect total camber gain (up to 16mm negative camber possible)**The included Ground Control nut must be used with these camber plates!**Torque camber plate mounting nuts to 18ft-lbs using a properly calibrated torque wrench. Pneumatic/electric impact gun not recommended.u00a0make-porsche,make-porsche-model-boxster,make-porsche-model-boxster-chassis-986--1997-2004-,make-porsche-model-boxster-chassis-986--1997-2004--submodel-boxster--2-5l-,make-porsche-model-boxster-chassis-986--1997-2004--submodel-boxster--2-7l-,make-porsche-model-boxster-chassis-986--1997-2004--submodel-boxster-s--3-2l-,make-porsche-model-boxster-chassis-987--2005-2008-,make-porsche-model-boxster-chassis-987--2005-2008--submodel-boxster--2-7l-,make-porsche-model-boxster-chassis-987--2005-2008--submodel-boxster-s--3-2l-,make-porsche-model-boxster-chassis-987--2005-2008--submodel-boxster-s--3-4l-,make-porsche-model-boxster-chassis-987-2--2009-2012-,make-porsche-model-boxster-chassis-987-2--2009-2012--submodel-boxster--2-9l-,make-porsche-model-boxster-chassis-987-2--2009-2012--submodel-boxster-s--3-4l-,make-porsche-model-cayman,make-porsche-model-cayman-chassis-987--2005-2008-,make-porsche-model-cayman-chassis-987--2005-2008--submodel-cayman--2-7l-,make-porsche-model-cayman-chassis-987--2005-2008--submodel-cayman-s--3-4l-,make-porsche-model-cayman-chassis-987-2--2009-2012-,make-porsche-model-cayman-chassis-987-2--2009-2012--submodel-cayman--2-9l-,make-porsche-model-cayman-chassis-987-2--2009-2012--submodel-cayman-r--3-4l-,make-porsche-model-cayman-chassis-987-2--2009-2012--submodel-cayman-s--3-4l- 4850693373975 4850693373975_33010617057303 Porsche 986/987 Boxster/Cayman Camber Plates ccpboxman-1 https://hinzmotorsport.com/products/porsche-986-987-boxster-cayman-camber-plates Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/Porsche993CamberPlates_1ad152e6-911b-4568-ac3a-3a827696d8d1.jpg?v=1609957074 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 AST 60mm 499.00 Porsche 986/987 Boxster/Cayman Camber Platesu00a0Whether you are looking to add more fender clearance for wider wheels and tires, improve the handling of your car, or both, camber plates are the perfect solution.We have been running Ground Control camber/caster plates on our car for over three years now with 40,000+ street and 1,000+ track miles on them. These have held up amazingly well and do not have any increased NVH at all.The Ground Control STREET/SPORT plate, a special version of our camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control.Camber plates are anodized and the rest of the components are zinc plated for corrosion resistance.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for roughly 3 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL.Configuration options include 2.25", 2.50", 60mm, 70mm or Stock springs, low profile dome or standard dome plates, and a Poly spring bushing.Lifetime guarantee on these camber plates, not including bearings.*Subframe and chassis variations affect total camber gain (up to 16mm negative camber possible)**The included Ground Control nut must be used with these camber plates!**Torque camber plate mounting nuts to 18ft-lbs using a properly calibrated torque wrench. Pneumatic/electric impact gun not recommended.u00a0make-porsche,make-porsche-model-boxster,make-porsche-model-boxster-chassis-986--1997-2004-,make-porsche-model-boxster-chassis-986--1997-2004--submodel-boxster--2-5l-,make-porsche-model-boxster-chassis-986--1997-2004--submodel-boxster--2-7l-,make-porsche-model-boxster-chassis-986--1997-2004--submodel-boxster-s--3-2l-,make-porsche-model-boxster-chassis-987--2005-2008-,make-porsche-model-boxster-chassis-987--2005-2008--submodel-boxster--2-7l-,make-porsche-model-boxster-chassis-987--2005-2008--submodel-boxster-s--3-2l-,make-porsche-model-boxster-chassis-987--2005-2008--submodel-boxster-s--3-4l-,make-porsche-model-boxster-chassis-987-2--2009-2012-,make-porsche-model-boxster-chassis-987-2--2009-2012--submodel-boxster--2-9l-,make-porsche-model-boxster-chassis-987-2--2009-2012--submodel-boxster-s--3-4l-,make-porsche-model-cayman,make-porsche-model-cayman-chassis-987--2005-2008-,make-porsche-model-cayman-chassis-987--2005-2008--submodel-cayman--2-7l-,make-porsche-model-cayman-chassis-987--2005-2008--submodel-cayman-s--3-4l-,make-porsche-model-cayman-chassis-987-2--2009-2012-,make-porsche-model-cayman-chassis-987-2--2009-2012--submodel-cayman--2-9l-,make-porsche-model-cayman-chassis-987-2--2009-2012--submodel-cayman-r--3-4l-,make-porsche-model-cayman-chassis-987-2--2009-2012--submodel-cayman-s--3-4l- 4850693373975 4850693373975_33010617122839 Porsche 986/987 Boxster/Cayman Camber Plates ccpboxman-1 https://hinzmotorsport.com/products/porsche-986-987-boxster-cayman-camber-plates Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/Porsche993CamberPlates_1ad152e6-911b-4568-ac3a-3a827696d8d1.jpg?v=1609957074 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 AST 70mm 499.00 Porsche 986/987 Boxster/Cayman Camber Platesu00a0Whether you are looking to add more fender clearance for wider wheels and tires, improve the handling of your car, or both, camber plates are the perfect solution.We have been running Ground Control camber/caster plates on our car for over three years now with 40,000+ street and 1,000+ track miles on them. These have held up amazingly well and do not have any increased NVH at all.The Ground Control STREET/SPORT plate, a special version of our camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control.Camber plates are anodized and the rest of the components are zinc plated for corrosion resistance.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for roughly 3 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL.Configuration options include 2.25", 2.50", 60mm, 70mm or Stock springs, low profile dome or standard dome plates, and a Poly spring bushing.Lifetime guarantee on these camber plates, not including bearings.*Subframe and chassis variations affect total camber gain (up to 16mm negative camber possible)**The included Ground Control nut must be used with these camber plates!**Torque camber plate mounting nuts to 18ft-lbs using a properly calibrated torque wrench. Pneumatic/electric impact gun not recommended.u00a0make-porsche,make-porsche-model-boxster,make-porsche-model-boxster-chassis-986--1997-2004-,make-porsche-model-boxster-chassis-986--1997-2004--submodel-boxster--2-5l-,make-porsche-model-boxster-chassis-986--1997-2004--submodel-boxster--2-7l-,make-porsche-model-boxster-chassis-986--1997-2004--submodel-boxster-s--3-2l-,make-porsche-model-boxster-chassis-987--2005-2008-,make-porsche-model-boxster-chassis-987--2005-2008--submodel-boxster--2-7l-,make-porsche-model-boxster-chassis-987--2005-2008--submodel-boxster-s--3-2l-,make-porsche-model-boxster-chassis-987--2005-2008--submodel-boxster-s--3-4l-,make-porsche-model-boxster-chassis-987-2--2009-2012-,make-porsche-model-boxster-chassis-987-2--2009-2012--submodel-boxster--2-9l-,make-porsche-model-boxster-chassis-987-2--2009-2012--submodel-boxster-s--3-4l-,make-porsche-model-cayman,make-porsche-model-cayman-chassis-987--2005-2008-,make-porsche-model-cayman-chassis-987--2005-2008--submodel-cayman--2-7l-,make-porsche-model-cayman-chassis-987--2005-2008--submodel-cayman-s--3-4l-,make-porsche-model-cayman-chassis-987-2--2009-2012-,make-porsche-model-cayman-chassis-987-2--2009-2012--submodel-cayman--2-9l-,make-porsche-model-cayman-chassis-987-2--2009-2012--submodel-cayman-r--3-4l-,make-porsche-model-cayman-chassis-987-2--2009-2012--submodel-cayman-s--3-4l- 4850693373975 4850693373975_33010617155607 Porsche 986/987 Boxster/Cayman Camber Plates ccpboxman-1 https://hinzmotorsport.com/products/porsche-986-987-boxster-cayman-camber-plates Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/Porsche993CamberPlates_1ad152e6-911b-4568-ac3a-3a827696d8d1.jpg?v=1609957074 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 AST 2.25" 499.00 Porsche 986/987 Boxster/Cayman Camber Platesu00a0Whether you are looking to add more fender clearance for wider wheels and tires, improve the handling of your car, or both, camber plates are the perfect solution.We have been running Ground Control camber/caster plates on our car for over three years now with 40,000+ street and 1,000+ track miles on them. These have held up amazingly well and do not have any increased NVH at all.The Ground Control STREET/SPORT plate, a special version of our camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control.Camber plates are anodized and the rest of the components are zinc plated for corrosion resistance.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for roughly 3 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL.Configuration options include 2.25", 2.50", 60mm, 70mm or Stock springs, low profile dome or standard dome plates, and a Poly spring bushing.Lifetime guarantee on these camber plates, not including bearings.*Subframe and chassis variations affect total camber gain (up to 16mm negative camber possible)**The included Ground Control nut must be used with these camber plates!**Torque camber plate mounting nuts to 18ft-lbs using a properly calibrated torque wrench. Pneumatic/electric impact gun not recommended.u00a0make-porsche,make-porsche-model-boxster,make-porsche-model-boxster-chassis-986--1997-2004-,make-porsche-model-boxster-chassis-986--1997-2004--submodel-boxster--2-5l-,make-porsche-model-boxster-chassis-986--1997-2004--submodel-boxster--2-7l-,make-porsche-model-boxster-chassis-986--1997-2004--submodel-boxster-s--3-2l-,make-porsche-model-boxster-chassis-987--2005-2008-,make-porsche-model-boxster-chassis-987--2005-2008--submodel-boxster--2-7l-,make-porsche-model-boxster-chassis-987--2005-2008--submodel-boxster-s--3-2l-,make-porsche-model-boxster-chassis-987--2005-2008--submodel-boxster-s--3-4l-,make-porsche-model-boxster-chassis-987-2--2009-2012-,make-porsche-model-boxster-chassis-987-2--2009-2012--submodel-boxster--2-9l-,make-porsche-model-boxster-chassis-987-2--2009-2012--submodel-boxster-s--3-4l-,make-porsche-model-cayman,make-porsche-model-cayman-chassis-987--2005-2008-,make-porsche-model-cayman-chassis-987--2005-2008--submodel-cayman--2-7l-,make-porsche-model-cayman-chassis-987--2005-2008--submodel-cayman-s--3-4l-,make-porsche-model-cayman-chassis-987-2--2009-2012-,make-porsche-model-cayman-chassis-987-2--2009-2012--submodel-cayman--2-9l-,make-porsche-model-cayman-chassis-987-2--2009-2012--submodel-cayman-r--3-4l-,make-porsche-model-cayman-chassis-987-2--2009-2012--submodel-cayman-s--3-4l- 4850693373975 4850693373975_33010617253911 Porsche 986/987 Boxster/Cayman Camber Plates ccpboxman-1 https://hinzmotorsport.com/products/porsche-986-987-boxster-cayman-camber-plates Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/Porsche993CamberPlates_1ad152e6-911b-4568-ac3a-3a827696d8d1.jpg?v=1609957074 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 Bilstein Stock 499.00 Porsche 986/987 Boxster/Cayman Camber Platesu00a0Whether you are looking to add more fender clearance for wider wheels and tires, improve the handling of your car, or both, camber plates are the perfect solution.We have been running Ground Control camber/caster plates on our car for over three years now with 40,000+ street and 1,000+ track miles on them. These have held up amazingly well and do not have any increased NVH at all.The Ground Control STREET/SPORT plate, a special version of our camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control.Camber plates are anodized and the rest of the components are zinc plated for corrosion resistance.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for roughly 3 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL.Configuration options include 2.25", 2.50", 60mm, 70mm or Stock springs, low profile dome or standard dome plates, and a Poly spring bushing.Lifetime guarantee on these camber plates, not including bearings.*Subframe and chassis variations affect total camber gain (up to 16mm negative camber possible)**The included Ground Control nut must be used with these camber plates!**Torque camber plate mounting nuts to 18ft-lbs using a properly calibrated torque wrench. Pneumatic/electric impact gun not recommended.u00a0make-porsche,make-porsche-model-boxster,make-porsche-model-boxster-chassis-986--1997-2004-,make-porsche-model-boxster-chassis-986--1997-2004--submodel-boxster--2-5l-,make-porsche-model-boxster-chassis-986--1997-2004--submodel-boxster--2-7l-,make-porsche-model-boxster-chassis-986--1997-2004--submodel-boxster-s--3-2l-,make-porsche-model-boxster-chassis-987--2005-2008-,make-porsche-model-boxster-chassis-987--2005-2008--submodel-boxster--2-7l-,make-porsche-model-boxster-chassis-987--2005-2008--submodel-boxster-s--3-2l-,make-porsche-model-boxster-chassis-987--2005-2008--submodel-boxster-s--3-4l-,make-porsche-model-boxster-chassis-987-2--2009-2012-,make-porsche-model-boxster-chassis-987-2--2009-2012--submodel-boxster--2-9l-,make-porsche-model-boxster-chassis-987-2--2009-2012--submodel-boxster-s--3-4l-,make-porsche-model-cayman,make-porsche-model-cayman-chassis-987--2005-2008-,make-porsche-model-cayman-chassis-987--2005-2008--submodel-cayman--2-7l-,make-porsche-model-cayman-chassis-987--2005-2008--submodel-cayman-s--3-4l-,make-porsche-model-cayman-chassis-987-2--2009-2012-,make-porsche-model-cayman-chassis-987-2--2009-2012--submodel-cayman--2-9l-,make-porsche-model-cayman-chassis-987-2--2009-2012--submodel-cayman-r--3-4l-,make-porsche-model-cayman-chassis-987-2--2009-2012--submodel-cayman-s--3-4l- 4850693373975 4850693373975_33010617221143 Porsche 986/987 Boxster/Cayman Camber Plates ccpboxman-1 https://hinzmotorsport.com/products/porsche-986-987-boxster-cayman-camber-plates Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/Porsche993CamberPlates_1ad152e6-911b-4568-ac3a-3a827696d8d1.jpg?v=1609957074 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 Bilstein 60mm 499.00 Porsche 986/987 Boxster/Cayman Camber Platesu00a0Whether you are looking to add more fender clearance for wider wheels and tires, improve the handling of your car, or both, camber plates are the perfect solution.We have been running Ground Control camber/caster plates on our car for over three years now with 40,000+ street and 1,000+ track miles on them. These have held up amazingly well and do not have any increased NVH at all.The Ground Control STREET/SPORT plate, a special version of our camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control.Camber plates are anodized and the rest of the components are zinc plated for corrosion resistance.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for roughly 3 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL.Configuration options include 2.25", 2.50", 60mm, 70mm or Stock springs, low profile dome or standard dome plates, and a Poly spring bushing.Lifetime guarantee on these camber plates, not including bearings.*Subframe and chassis variations affect total camber gain (up to 16mm negative camber possible)**The included Ground Control nut must be used with these camber plates!**Torque camber plate mounting nuts to 18ft-lbs using a properly calibrated torque wrench. Pneumatic/electric impact gun not recommended.u00a0make-porsche,make-porsche-model-boxster,make-porsche-model-boxster-chassis-986--1997-2004-,make-porsche-model-boxster-chassis-986--1997-2004--submodel-boxster--2-5l-,make-porsche-model-boxster-chassis-986--1997-2004--submodel-boxster--2-7l-,make-porsche-model-boxster-chassis-986--1997-2004--submodel-boxster-s--3-2l-,make-porsche-model-boxster-chassis-987--2005-2008-,make-porsche-model-boxster-chassis-987--2005-2008--submodel-boxster--2-7l-,make-porsche-model-boxster-chassis-987--2005-2008--submodel-boxster-s--3-2l-,make-porsche-model-boxster-chassis-987--2005-2008--submodel-boxster-s--3-4l-,make-porsche-model-boxster-chassis-987-2--2009-2012-,make-porsche-model-boxster-chassis-987-2--2009-2012--submodel-boxster--2-9l-,make-porsche-model-boxster-chassis-987-2--2009-2012--submodel-boxster-s--3-4l-,make-porsche-model-cayman,make-porsche-model-cayman-chassis-987--2005-2008-,make-porsche-model-cayman-chassis-987--2005-2008--submodel-cayman--2-7l-,make-porsche-model-cayman-chassis-987--2005-2008--submodel-cayman-s--3-4l-,make-porsche-model-cayman-chassis-987-2--2009-2012-,make-porsche-model-cayman-chassis-987-2--2009-2012--submodel-cayman--2-9l-,make-porsche-model-cayman-chassis-987-2--2009-2012--submodel-cayman-r--3-4l-,make-porsche-model-cayman-chassis-987-2--2009-2012--submodel-cayman-s--3-4l- 4850693373975 4850693373975_33010617286679 Porsche 986/987 Boxster/Cayman Camber Plates ccpboxman-1 https://hinzmotorsport.com/products/porsche-986-987-boxster-cayman-camber-plates Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/Porsche993CamberPlates_1ad152e6-911b-4568-ac3a-3a827696d8d1.jpg?v=1609957074 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 Bilstein 70mm 499.00 Porsche 986/987 Boxster/Cayman Camber Platesu00a0Whether you are looking to add more fender clearance for wider wheels and tires, improve the handling of your car, or both, camber plates are the perfect solution.We have been running Ground Control camber/caster plates on our car for over three years now with 40,000+ street and 1,000+ track miles on them. These have held up amazingly well and do not have any increased NVH at all.The Ground Control STREET/SPORT plate, a special version of our camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control.Camber plates are anodized and the rest of the components are zinc plated for corrosion resistance.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for roughly 3 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL.Configuration options include 2.25", 2.50", 60mm, 70mm or Stock springs, low profile dome or standard dome plates, and a Poly spring bushing.Lifetime guarantee on these camber plates, not including bearings.*Subframe and chassis variations affect total camber gain (up to 16mm negative camber possible)**The included Ground Control nut must be used with these camber plates!**Torque camber plate mounting nuts to 18ft-lbs using a properly calibrated torque wrench. Pneumatic/electric impact gun not recommended.u00a0make-porsche,make-porsche-model-boxster,make-porsche-model-boxster-chassis-986--1997-2004-,make-porsche-model-boxster-chassis-986--1997-2004--submodel-boxster--2-5l-,make-porsche-model-boxster-chassis-986--1997-2004--submodel-boxster--2-7l-,make-porsche-model-boxster-chassis-986--1997-2004--submodel-boxster-s--3-2l-,make-porsche-model-boxster-chassis-987--2005-2008-,make-porsche-model-boxster-chassis-987--2005-2008--submodel-boxster--2-7l-,make-porsche-model-boxster-chassis-987--2005-2008--submodel-boxster-s--3-2l-,make-porsche-model-boxster-chassis-987--2005-2008--submodel-boxster-s--3-4l-,make-porsche-model-boxster-chassis-987-2--2009-2012-,make-porsche-model-boxster-chassis-987-2--2009-2012--submodel-boxster--2-9l-,make-porsche-model-boxster-chassis-987-2--2009-2012--submodel-boxster-s--3-4l-,make-porsche-model-cayman,make-porsche-model-cayman-chassis-987--2005-2008-,make-porsche-model-cayman-chassis-987--2005-2008--submodel-cayman--2-7l-,make-porsche-model-cayman-chassis-987--2005-2008--submodel-cayman-s--3-4l-,make-porsche-model-cayman-chassis-987-2--2009-2012-,make-porsche-model-cayman-chassis-987-2--2009-2012--submodel-cayman--2-9l-,make-porsche-model-cayman-chassis-987-2--2009-2012--submodel-cayman-r--3-4l-,make-porsche-model-cayman-chassis-987-2--2009-2012--submodel-cayman-s--3-4l- 4850693373975 4850693373975_33010617319447 Porsche 986/987 Boxster/Cayman Camber Plates ccpboxman-1 https://hinzmotorsport.com/products/porsche-986-987-boxster-cayman-camber-plates Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/Porsche993CamberPlates_1ad152e6-911b-4568-ac3a-3a827696d8d1.jpg?v=1609957074 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 Bilstein 2.25" 499.00 Porsche 986/987 Boxster/Cayman Camber Platesu00a0Whether you are looking to add more fender clearance for wider wheels and tires, improve the handling of your car, or both, camber plates are the perfect solution.We have been running Ground Control camber/caster plates on our car for over three years now with 40,000+ street and 1,000+ track miles on them. These have held up amazingly well and do not have any increased NVH at all.The Ground Control STREET/SPORT plate, a special version of our camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control.Camber plates are anodized and the rest of the components are zinc plated for corrosion resistance.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for roughly 3 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL.Configuration options include 2.25", 2.50", 60mm, 70mm or Stock springs, low profile dome or standard dome plates, and a Poly spring bushing.Lifetime guarantee on these camber plates, not including bearings.*Subframe and chassis variations affect total camber gain (up to 16mm negative camber possible)**The included Ground Control nut must be used with these camber plates!**Torque camber plate mounting nuts to 18ft-lbs using a properly calibrated torque wrench. Pneumatic/electric impact gun not recommended.u00a0make-porsche,make-porsche-model-boxster,make-porsche-model-boxster-chassis-986--1997-2004-,make-porsche-model-boxster-chassis-986--1997-2004--submodel-boxster--2-5l-,make-porsche-model-boxster-chassis-986--1997-2004--submodel-boxster--2-7l-,make-porsche-model-boxster-chassis-986--1997-2004--submodel-boxster-s--3-2l-,make-porsche-model-boxster-chassis-987--2005-2008-,make-porsche-model-boxster-chassis-987--2005-2008--submodel-boxster--2-7l-,make-porsche-model-boxster-chassis-987--2005-2008--submodel-boxster-s--3-2l-,make-porsche-model-boxster-chassis-987--2005-2008--submodel-boxster-s--3-4l-,make-porsche-model-boxster-chassis-987-2--2009-2012-,make-porsche-model-boxster-chassis-987-2--2009-2012--submodel-boxster--2-9l-,make-porsche-model-boxster-chassis-987-2--2009-2012--submodel-boxster-s--3-4l-,make-porsche-model-cayman,make-porsche-model-cayman-chassis-987--2005-2008-,make-porsche-model-cayman-chassis-987--2005-2008--submodel-cayman--2-7l-,make-porsche-model-cayman-chassis-987--2005-2008--submodel-cayman-s--3-4l-,make-porsche-model-cayman-chassis-987-2--2009-2012-,make-porsche-model-cayman-chassis-987-2--2009-2012--submodel-cayman--2-9l-,make-porsche-model-cayman-chassis-987-2--2009-2012--submodel-cayman-r--3-4l-,make-porsche-model-cayman-chassis-987-2--2009-2012--submodel-cayman-s--3-4l- 4850693373975 4850693373975_33010617417751 Porsche 986/987 Boxster/Cayman Camber Plates ccpboxman-1 https://hinzmotorsport.com/products/porsche-986-987-boxster-cayman-camber-plates Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/Porsche993CamberPlates_1ad152e6-911b-4568-ac3a-3a827696d8d1.jpg?v=1609957074 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 JRZ Stock 499.00 Porsche 986/987 Boxster/Cayman Camber Platesu00a0Whether you are looking to add more fender clearance for wider wheels and tires, improve the handling of your car, or both, camber plates are the perfect solution.We have been running Ground Control camber/caster plates on our car for over three years now with 40,000+ street and 1,000+ track miles on them. These have held up amazingly well and do not have any increased NVH at all.The Ground Control STREET/SPORT plate, a special version of our camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control.Camber plates are anodized and the rest of the components are zinc plated for corrosion resistance.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for roughly 3 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL.Configuration options include 2.25", 2.50", 60mm, 70mm or Stock springs, low profile dome or standard dome plates, and a Poly spring bushing.Lifetime guarantee on these camber plates, not including bearings.*Subframe and chassis variations affect total camber gain (up to 16mm negative camber possible)**The included Ground Control nut must be used with these camber plates!**Torque camber plate mounting nuts to 18ft-lbs using a properly calibrated torque wrench. Pneumatic/electric impact gun not recommended.u00a0make-porsche,make-porsche-model-boxster,make-porsche-model-boxster-chassis-986--1997-2004-,make-porsche-model-boxster-chassis-986--1997-2004--submodel-boxster--2-5l-,make-porsche-model-boxster-chassis-986--1997-2004--submodel-boxster--2-7l-,make-porsche-model-boxster-chassis-986--1997-2004--submodel-boxster-s--3-2l-,make-porsche-model-boxster-chassis-987--2005-2008-,make-porsche-model-boxster-chassis-987--2005-2008--submodel-boxster--2-7l-,make-porsche-model-boxster-chassis-987--2005-2008--submodel-boxster-s--3-2l-,make-porsche-model-boxster-chassis-987--2005-2008--submodel-boxster-s--3-4l-,make-porsche-model-boxster-chassis-987-2--2009-2012-,make-porsche-model-boxster-chassis-987-2--2009-2012--submodel-boxster--2-9l-,make-porsche-model-boxster-chassis-987-2--2009-2012--submodel-boxster-s--3-4l-,make-porsche-model-cayman,make-porsche-model-cayman-chassis-987--2005-2008-,make-porsche-model-cayman-chassis-987--2005-2008--submodel-cayman--2-7l-,make-porsche-model-cayman-chassis-987--2005-2008--submodel-cayman-s--3-4l-,make-porsche-model-cayman-chassis-987-2--2009-2012-,make-porsche-model-cayman-chassis-987-2--2009-2012--submodel-cayman--2-9l-,make-porsche-model-cayman-chassis-987-2--2009-2012--submodel-cayman-r--3-4l-,make-porsche-model-cayman-chassis-987-2--2009-2012--submodel-cayman-s--3-4l- 4850693373975 4850693373975_33010617384983 Porsche 986/987 Boxster/Cayman Camber Plates ccpboxman-1 https://hinzmotorsport.com/products/porsche-986-987-boxster-cayman-camber-plates Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/Porsche993CamberPlates_1ad152e6-911b-4568-ac3a-3a827696d8d1.jpg?v=1609957074 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 JRZ 60mm 499.00 Porsche 986/987 Boxster/Cayman Camber Platesu00a0Whether you are looking to add more fender clearance for wider wheels and tires, improve the handling of your car, or both, camber plates are the perfect solution.We have been running Ground Control camber/caster plates on our car for over three years now with 40,000+ street and 1,000+ track miles on them. These have held up amazingly well and do not have any increased NVH at all.The Ground Control STREET/SPORT plate, a special version of our camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control.Camber plates are anodized and the rest of the components are zinc plated for corrosion resistance.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for roughly 3 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL.Configuration options include 2.25", 2.50", 60mm, 70mm or Stock springs, low profile dome or standard dome plates, and a Poly spring bushing.Lifetime guarantee on these camber plates, not including bearings.*Subframe and chassis variations affect total camber gain (up to 16mm negative camber possible)**The included Ground Control nut must be used with these camber plates!**Torque camber plate mounting nuts to 18ft-lbs using a properly calibrated torque wrench. Pneumatic/electric impact gun not recommended.u00a0make-porsche,make-porsche-model-boxster,make-porsche-model-boxster-chassis-986--1997-2004-,make-porsche-model-boxster-chassis-986--1997-2004--submodel-boxster--2-5l-,make-porsche-model-boxster-chassis-986--1997-2004--submodel-boxster--2-7l-,make-porsche-model-boxster-chassis-986--1997-2004--submodel-boxster-s--3-2l-,make-porsche-model-boxster-chassis-987--2005-2008-,make-porsche-model-boxster-chassis-987--2005-2008--submodel-boxster--2-7l-,make-porsche-model-boxster-chassis-987--2005-2008--submodel-boxster-s--3-2l-,make-porsche-model-boxster-chassis-987--2005-2008--submodel-boxster-s--3-4l-,make-porsche-model-boxster-chassis-987-2--2009-2012-,make-porsche-model-boxster-chassis-987-2--2009-2012--submodel-boxster--2-9l-,make-porsche-model-boxster-chassis-987-2--2009-2012--submodel-boxster-s--3-4l-,make-porsche-model-cayman,make-porsche-model-cayman-chassis-987--2005-2008-,make-porsche-model-cayman-chassis-987--2005-2008--submodel-cayman--2-7l-,make-porsche-model-cayman-chassis-987--2005-2008--submodel-cayman-s--3-4l-,make-porsche-model-cayman-chassis-987-2--2009-2012-,make-porsche-model-cayman-chassis-987-2--2009-2012--submodel-cayman--2-9l-,make-porsche-model-cayman-chassis-987-2--2009-2012--submodel-cayman-r--3-4l-,make-porsche-model-cayman-chassis-987-2--2009-2012--submodel-cayman-s--3-4l- 4850693373975 4850693373975_33010617450519 Porsche 986/987 Boxster/Cayman Camber Plates ccpboxman-1 https://hinzmotorsport.com/products/porsche-986-987-boxster-cayman-camber-plates Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/Porsche993CamberPlates_1ad152e6-911b-4568-ac3a-3a827696d8d1.jpg?v=1609957074 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 JRZ 70mm 499.00 Porsche 986/987 Boxster/Cayman Camber Platesu00a0Whether you are looking to add more fender clearance for wider wheels and tires, improve the handling of your car, or both, camber plates are the perfect solution.We have been running Ground Control camber/caster plates on our car for over three years now with 40,000+ street and 1,000+ track miles on them. These have held up amazingly well and do not have any increased NVH at all.The Ground Control STREET/SPORT plate, a special version of our camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control.Camber plates are anodized and the rest of the components are zinc plated for corrosion resistance.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for roughly 3 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL.Configuration options include 2.25", 2.50", 60mm, 70mm or Stock springs, low profile dome or standard dome plates, and a Poly spring bushing.Lifetime guarantee on these camber plates, not including bearings.*Subframe and chassis variations affect total camber gain (up to 16mm negative camber possible)**The included Ground Control nut must be used with these camber plates!**Torque camber plate mounting nuts to 18ft-lbs using a properly calibrated torque wrench. Pneumatic/electric impact gun not recommended.u00a0make-porsche,make-porsche-model-boxster,make-porsche-model-boxster-chassis-986--1997-2004-,make-porsche-model-boxster-chassis-986--1997-2004--submodel-boxster--2-5l-,make-porsche-model-boxster-chassis-986--1997-2004--submodel-boxster--2-7l-,make-porsche-model-boxster-chassis-986--1997-2004--submodel-boxster-s--3-2l-,make-porsche-model-boxster-chassis-987--2005-2008-,make-porsche-model-boxster-chassis-987--2005-2008--submodel-boxster--2-7l-,make-porsche-model-boxster-chassis-987--2005-2008--submodel-boxster-s--3-2l-,make-porsche-model-boxster-chassis-987--2005-2008--submodel-boxster-s--3-4l-,make-porsche-model-boxster-chassis-987-2--2009-2012-,make-porsche-model-boxster-chassis-987-2--2009-2012--submodel-boxster--2-9l-,make-porsche-model-boxster-chassis-987-2--2009-2012--submodel-boxster-s--3-4l-,make-porsche-model-cayman,make-porsche-model-cayman-chassis-987--2005-2008-,make-porsche-model-cayman-chassis-987--2005-2008--submodel-cayman--2-7l-,make-porsche-model-cayman-chassis-987--2005-2008--submodel-cayman-s--3-4l-,make-porsche-model-cayman-chassis-987-2--2009-2012-,make-porsche-model-cayman-chassis-987-2--2009-2012--submodel-cayman--2-9l-,make-porsche-model-cayman-chassis-987-2--2009-2012--submodel-cayman-r--3-4l-,make-porsche-model-cayman-chassis-987-2--2009-2012--submodel-cayman-s--3-4l- 4850693373975 4850693373975_33010617483287 Porsche 986/987 Boxster/Cayman Camber Plates ccpboxman-1 https://hinzmotorsport.com/products/porsche-986-987-boxster-cayman-camber-plates Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/Porsche993CamberPlates_1ad152e6-911b-4568-ac3a-3a827696d8d1.jpg?v=1609957074 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 JRZ 2.25" 499.00 Porsche 986/987 Boxster/Cayman Camber Platesu00a0Whether you are looking to add more fender clearance for wider wheels and tires, improve the handling of your car, or both, camber plates are the perfect solution.We have been running Ground Control camber/caster plates on our car for over three years now with 40,000+ street and 1,000+ track miles on them. These have held up amazingly well and do not have any increased NVH at all.The Ground Control STREET/SPORT plate, a special version of our camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control.Camber plates are anodized and the rest of the components are zinc plated for corrosion resistance.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for roughly 3 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL.Configuration options include 2.25", 2.50", 60mm, 70mm or Stock springs, low profile dome or standard dome plates, and a Poly spring bushing.Lifetime guarantee on these camber plates, not including bearings.*Subframe and chassis variations affect total camber gain (up to 16mm negative camber possible)**The included Ground Control nut must be used with these camber plates!**Torque camber plate mounting nuts to 18ft-lbs using a properly calibrated torque wrench. Pneumatic/electric impact gun not recommended.u00a0make-porsche,make-porsche-model-boxster,make-porsche-model-boxster-chassis-986--1997-2004-,make-porsche-model-boxster-chassis-986--1997-2004--submodel-boxster--2-5l-,make-porsche-model-boxster-chassis-986--1997-2004--submodel-boxster--2-7l-,make-porsche-model-boxster-chassis-986--1997-2004--submodel-boxster-s--3-2l-,make-porsche-model-boxster-chassis-987--2005-2008-,make-porsche-model-boxster-chassis-987--2005-2008--submodel-boxster--2-7l-,make-porsche-model-boxster-chassis-987--2005-2008--submodel-boxster-s--3-2l-,make-porsche-model-boxster-chassis-987--2005-2008--submodel-boxster-s--3-4l-,make-porsche-model-boxster-chassis-987-2--2009-2012-,make-porsche-model-boxster-chassis-987-2--2009-2012--submodel-boxster--2-9l-,make-porsche-model-boxster-chassis-987-2--2009-2012--submodel-boxster-s--3-4l-,make-porsche-model-cayman,make-porsche-model-cayman-chassis-987--2005-2008-,make-porsche-model-cayman-chassis-987--2005-2008--submodel-cayman--2-7l-,make-porsche-model-cayman-chassis-987--2005-2008--submodel-cayman-s--3-4l-,make-porsche-model-cayman-chassis-987-2--2009-2012-,make-porsche-model-cayman-chassis-987-2--2009-2012--submodel-cayman--2-9l-,make-porsche-model-cayman-chassis-987-2--2009-2012--submodel-cayman-r--3-4l-,make-porsche-model-cayman-chassis-987-2--2009-2012--submodel-cayman-s--3-4l- 4850693373975 4850693373975_33010617581591 Porsche 986/987 Boxster/Cayman Camber Plates ccpboxman-1 https://hinzmotorsport.com/products/porsche-986-987-boxster-cayman-camber-plates Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/Porsche993CamberPlates_1ad152e6-911b-4568-ac3a-3a827696d8d1.jpg?v=1609957074 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 KW Stock 499.00 Porsche 986/987 Boxster/Cayman Camber Platesu00a0Whether you are looking to add more fender clearance for wider wheels and tires, improve the handling of your car, or both, camber plates are the perfect solution.We have been running Ground Control camber/caster plates on our car for over three years now with 40,000+ street and 1,000+ track miles on them. These have held up amazingly well and do not have any increased NVH at all.The Ground Control STREET/SPORT plate, a special version of our camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control.Camber plates are anodized and the rest of the components are zinc plated for corrosion resistance.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for roughly 3 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL.Configuration options include 2.25", 2.50", 60mm, 70mm or Stock springs, low profile dome or standard dome plates, and a Poly spring bushing.Lifetime guarantee on these camber plates, not including bearings.*Subframe and chassis variations affect total camber gain (up to 16mm negative camber possible)**The included Ground Control nut must be used with these camber plates!**Torque camber plate mounting nuts to 18ft-lbs using a properly calibrated torque wrench. Pneumatic/electric impact gun not recommended.u00a0make-porsche,make-porsche-model-boxster,make-porsche-model-boxster-chassis-986--1997-2004-,make-porsche-model-boxster-chassis-986--1997-2004--submodel-boxster--2-5l-,make-porsche-model-boxster-chassis-986--1997-2004--submodel-boxster--2-7l-,make-porsche-model-boxster-chassis-986--1997-2004--submodel-boxster-s--3-2l-,make-porsche-model-boxster-chassis-987--2005-2008-,make-porsche-model-boxster-chassis-987--2005-2008--submodel-boxster--2-7l-,make-porsche-model-boxster-chassis-987--2005-2008--submodel-boxster-s--3-2l-,make-porsche-model-boxster-chassis-987--2005-2008--submodel-boxster-s--3-4l-,make-porsche-model-boxster-chassis-987-2--2009-2012-,make-porsche-model-boxster-chassis-987-2--2009-2012--submodel-boxster--2-9l-,make-porsche-model-boxster-chassis-987-2--2009-2012--submodel-boxster-s--3-4l-,make-porsche-model-cayman,make-porsche-model-cayman-chassis-987--2005-2008-,make-porsche-model-cayman-chassis-987--2005-2008--submodel-cayman--2-7l-,make-porsche-model-cayman-chassis-987--2005-2008--submodel-cayman-s--3-4l-,make-porsche-model-cayman-chassis-987-2--2009-2012-,make-porsche-model-cayman-chassis-987-2--2009-2012--submodel-cayman--2-9l-,make-porsche-model-cayman-chassis-987-2--2009-2012--submodel-cayman-r--3-4l-,make-porsche-model-cayman-chassis-987-2--2009-2012--submodel-cayman-s--3-4l- 4850693373975 4850693373975_33010617548823 Porsche 986/987 Boxster/Cayman Camber Plates ccpboxman-1 https://hinzmotorsport.com/products/porsche-986-987-boxster-cayman-camber-plates Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/Porsche993CamberPlates_1ad152e6-911b-4568-ac3a-3a827696d8d1.jpg?v=1609957074 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 KW 60mm 499.00 Porsche 986/987 Boxster/Cayman Camber Platesu00a0Whether you are looking to add more fender clearance for wider wheels and tires, improve the handling of your car, or both, camber plates are the perfect solution.We have been running Ground Control camber/caster plates on our car for over three years now with 40,000+ street and 1,000+ track miles on them. These have held up amazingly well and do not have any increased NVH at all.The Ground Control STREET/SPORT plate, a special version of our camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control.Camber plates are anodized and the rest of the components are zinc plated for corrosion resistance.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for roughly 3 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL.Configuration options include 2.25", 2.50", 60mm, 70mm or Stock springs, low profile dome or standard dome plates, and a Poly spring bushing.Lifetime guarantee on these camber plates, not including bearings.*Subframe and chassis variations affect total camber gain (up to 16mm negative camber possible)**The included Ground Control nut must be used with these camber plates!**Torque camber plate mounting nuts to 18ft-lbs using a properly calibrated torque wrench. Pneumatic/electric impact gun not recommended.u00a0make-porsche,make-porsche-model-boxster,make-porsche-model-boxster-chassis-986--1997-2004-,make-porsche-model-boxster-chassis-986--1997-2004--submodel-boxster--2-5l-,make-porsche-model-boxster-chassis-986--1997-2004--submodel-boxster--2-7l-,make-porsche-model-boxster-chassis-986--1997-2004--submodel-boxster-s--3-2l-,make-porsche-model-boxster-chassis-987--2005-2008-,make-porsche-model-boxster-chassis-987--2005-2008--submodel-boxster--2-7l-,make-porsche-model-boxster-chassis-987--2005-2008--submodel-boxster-s--3-2l-,make-porsche-model-boxster-chassis-987--2005-2008--submodel-boxster-s--3-4l-,make-porsche-model-boxster-chassis-987-2--2009-2012-,make-porsche-model-boxster-chassis-987-2--2009-2012--submodel-boxster--2-9l-,make-porsche-model-boxster-chassis-987-2--2009-2012--submodel-boxster-s--3-4l-,make-porsche-model-cayman,make-porsche-model-cayman-chassis-987--2005-2008-,make-porsche-model-cayman-chassis-987--2005-2008--submodel-cayman--2-7l-,make-porsche-model-cayman-chassis-987--2005-2008--submodel-cayman-s--3-4l-,make-porsche-model-cayman-chassis-987-2--2009-2012-,make-porsche-model-cayman-chassis-987-2--2009-2012--submodel-cayman--2-9l-,make-porsche-model-cayman-chassis-987-2--2009-2012--submodel-cayman-r--3-4l-,make-porsche-model-cayman-chassis-987-2--2009-2012--submodel-cayman-s--3-4l- 4850693373975 4850693373975_33010617614359 Porsche 986/987 Boxster/Cayman Camber Plates ccpboxman-1 https://hinzmotorsport.com/products/porsche-986-987-boxster-cayman-camber-plates Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/Porsche993CamberPlates_1ad152e6-911b-4568-ac3a-3a827696d8d1.jpg?v=1609957074 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 KW 70mm 499.00 Porsche 986/987 Boxster/Cayman Camber Platesu00a0Whether you are looking to add more fender clearance for wider wheels and tires, improve the handling of your car, or both, camber plates are the perfect solution.We have been running Ground Control camber/caster plates on our car for over three years now with 40,000+ street and 1,000+ track miles on them. These have held up amazingly well and do not have any increased NVH at all.The Ground Control STREET/SPORT plate, a special version of our camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control.Camber plates are anodized and the rest of the components are zinc plated for corrosion resistance.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for roughly 3 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL.Configuration options include 2.25", 2.50", 60mm, 70mm or Stock springs, low profile dome or standard dome plates, and a Poly spring bushing.Lifetime guarantee on these camber plates, not including bearings.*Subframe and chassis variations affect total camber gain (up to 16mm negative camber possible)**The included Ground Control nut must be used with these camber plates!**Torque camber plate mounting nuts to 18ft-lbs using a properly calibrated torque wrench. Pneumatic/electric impact gun not recommended.u00a0make-porsche,make-porsche-model-boxster,make-porsche-model-boxster-chassis-986--1997-2004-,make-porsche-model-boxster-chassis-986--1997-2004--submodel-boxster--2-5l-,make-porsche-model-boxster-chassis-986--1997-2004--submodel-boxster--2-7l-,make-porsche-model-boxster-chassis-986--1997-2004--submodel-boxster-s--3-2l-,make-porsche-model-boxster-chassis-987--2005-2008-,make-porsche-model-boxster-chassis-987--2005-2008--submodel-boxster--2-7l-,make-porsche-model-boxster-chassis-987--2005-2008--submodel-boxster-s--3-2l-,make-porsche-model-boxster-chassis-987--2005-2008--submodel-boxster-s--3-4l-,make-porsche-model-boxster-chassis-987-2--2009-2012-,make-porsche-model-boxster-chassis-987-2--2009-2012--submodel-boxster--2-9l-,make-porsche-model-boxster-chassis-987-2--2009-2012--submodel-boxster-s--3-4l-,make-porsche-model-cayman,make-porsche-model-cayman-chassis-987--2005-2008-,make-porsche-model-cayman-chassis-987--2005-2008--submodel-cayman--2-7l-,make-porsche-model-cayman-chassis-987--2005-2008--submodel-cayman-s--3-4l-,make-porsche-model-cayman-chassis-987-2--2009-2012-,make-porsche-model-cayman-chassis-987-2--2009-2012--submodel-cayman--2-9l-,make-porsche-model-cayman-chassis-987-2--2009-2012--submodel-cayman-r--3-4l-,make-porsche-model-cayman-chassis-987-2--2009-2012--submodel-cayman-s--3-4l- 4850693373975 4850693373975_33010617647127 Porsche 986/987 Boxster/Cayman Camber Plates ccpboxman-1 https://hinzmotorsport.com/products/porsche-986-987-boxster-cayman-camber-plates Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/Porsche993CamberPlates_1ad152e6-911b-4568-ac3a-3a827696d8d1.jpg?v=1609957074 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 KW 2.25" 499.00 Porsche 986/987 Boxster/Cayman Camber Platesu00a0Whether you are looking to add more fender clearance for wider wheels and tires, improve the handling of your car, or both, camber plates are the perfect solution.We have been running Ground Control camber/caster plates on our car for over three years now with 40,000+ street and 1,000+ track miles on them. These have held up amazingly well and do not have any increased NVH at all.The Ground Control STREET/SPORT plate, a special version of our camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control.Camber plates are anodized and the rest of the components are zinc plated for corrosion resistance.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for roughly 3 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL.Configuration options include 2.25", 2.50", 60mm, 70mm or Stock springs, low profile dome or standard dome plates, and a Poly spring bushing.Lifetime guarantee on these camber plates, not including bearings.*Subframe and chassis variations affect total camber gain (up to 16mm negative camber possible)**The included Ground Control nut must be used with these camber plates!**Torque camber plate mounting nuts to 18ft-lbs using a properly calibrated torque wrench. Pneumatic/electric impact gun not recommended.u00a0make-porsche,make-porsche-model-boxster,make-porsche-model-boxster-chassis-986--1997-2004-,make-porsche-model-boxster-chassis-986--1997-2004--submodel-boxster--2-5l-,make-porsche-model-boxster-chassis-986--1997-2004--submodel-boxster--2-7l-,make-porsche-model-boxster-chassis-986--1997-2004--submodel-boxster-s--3-2l-,make-porsche-model-boxster-chassis-987--2005-2008-,make-porsche-model-boxster-chassis-987--2005-2008--submodel-boxster--2-7l-,make-porsche-model-boxster-chassis-987--2005-2008--submodel-boxster-s--3-2l-,make-porsche-model-boxster-chassis-987--2005-2008--submodel-boxster-s--3-4l-,make-porsche-model-boxster-chassis-987-2--2009-2012-,make-porsche-model-boxster-chassis-987-2--2009-2012--submodel-boxster--2-9l-,make-porsche-model-boxster-chassis-987-2--2009-2012--submodel-boxster-s--3-4l-,make-porsche-model-cayman,make-porsche-model-cayman-chassis-987--2005-2008-,make-porsche-model-cayman-chassis-987--2005-2008--submodel-cayman--2-7l-,make-porsche-model-cayman-chassis-987--2005-2008--submodel-cayman-s--3-4l-,make-porsche-model-cayman-chassis-987-2--2009-2012-,make-porsche-model-cayman-chassis-987-2--2009-2012--submodel-cayman--2-9l-,make-porsche-model-cayman-chassis-987-2--2009-2012--submodel-cayman-r--3-4l-,make-porsche-model-cayman-chassis-987-2--2009-2012--submodel-cayman-s--3-4l- 4850693373975 4850693373975_33010617778199 Porsche 986/987 Boxster/Cayman Camber Plates ccpboxman-1 https://hinzmotorsport.com/products/porsche-986-987-boxster-cayman-camber-plates Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/Porsche993CamberPlates_1ad152e6-911b-4568-ac3a-3a827696d8d1.jpg?v=1609957074 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 MCS Stock 499.00 Porsche 986/987 Boxster/Cayman Camber Platesu00a0Whether you are looking to add more fender clearance for wider wheels and tires, improve the handling of your car, or both, camber plates are the perfect solution.We have been running Ground Control camber/caster plates on our car for over three years now with 40,000+ street and 1,000+ track miles on them. These have held up amazingly well and do not have any increased NVH at all.The Ground Control STREET/SPORT plate, a special version of our camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control.Camber plates are anodized and the rest of the components are zinc plated for corrosion resistance.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for roughly 3 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL.Configuration options include 2.25", 2.50", 60mm, 70mm or Stock springs, low profile dome or standard dome plates, and a Poly spring bushing.Lifetime guarantee on these camber plates, not including bearings.*Subframe and chassis variations affect total camber gain (up to 16mm negative camber possible)**The included Ground Control nut must be used with these camber plates!**Torque camber plate mounting nuts to 18ft-lbs using a properly calibrated torque wrench. Pneumatic/electric impact gun not recommended.u00a0make-porsche,make-porsche-model-boxster,make-porsche-model-boxster-chassis-986--1997-2004-,make-porsche-model-boxster-chassis-986--1997-2004--submodel-boxster--2-5l-,make-porsche-model-boxster-chassis-986--1997-2004--submodel-boxster--2-7l-,make-porsche-model-boxster-chassis-986--1997-2004--submodel-boxster-s--3-2l-,make-porsche-model-boxster-chassis-987--2005-2008-,make-porsche-model-boxster-chassis-987--2005-2008--submodel-boxster--2-7l-,make-porsche-model-boxster-chassis-987--2005-2008--submodel-boxster-s--3-2l-,make-porsche-model-boxster-chassis-987--2005-2008--submodel-boxster-s--3-4l-,make-porsche-model-boxster-chassis-987-2--2009-2012-,make-porsche-model-boxster-chassis-987-2--2009-2012--submodel-boxster--2-9l-,make-porsche-model-boxster-chassis-987-2--2009-2012--submodel-boxster-s--3-4l-,make-porsche-model-cayman,make-porsche-model-cayman-chassis-987--2005-2008-,make-porsche-model-cayman-chassis-987--2005-2008--submodel-cayman--2-7l-,make-porsche-model-cayman-chassis-987--2005-2008--submodel-cayman-s--3-4l-,make-porsche-model-cayman-chassis-987-2--2009-2012-,make-porsche-model-cayman-chassis-987-2--2009-2012--submodel-cayman--2-9l-,make-porsche-model-cayman-chassis-987-2--2009-2012--submodel-cayman-r--3-4l-,make-porsche-model-cayman-chassis-987-2--2009-2012--submodel-cayman-s--3-4l- 4850693373975 4850693373975_33010617745431 Porsche 986/987 Boxster/Cayman Camber Plates ccpboxman-1 https://hinzmotorsport.com/products/porsche-986-987-boxster-cayman-camber-plates Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/Porsche993CamberPlates_1ad152e6-911b-4568-ac3a-3a827696d8d1.jpg?v=1609957074 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 MCS 60mm 499.00 Porsche 986/987 Boxster/Cayman Camber Platesu00a0Whether you are looking to add more fender clearance for wider wheels and tires, improve the handling of your car, or both, camber plates are the perfect solution.We have been running Ground Control camber/caster plates on our car for over three years now with 40,000+ street and 1,000+ track miles on them. These have held up amazingly well and do not have any increased NVH at all.The Ground Control STREET/SPORT plate, a special version of our camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control.Camber plates are anodized and the rest of the components are zinc plated for corrosion resistance.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for roughly 3 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL.Configuration options include 2.25", 2.50", 60mm, 70mm or Stock springs, low profile dome or standard dome plates, and a Poly spring bushing.Lifetime guarantee on these camber plates, not including bearings.*Subframe and chassis variations affect total camber gain (up to 16mm negative camber possible)**The included Ground Control nut must be used with these camber plates!**Torque camber plate mounting nuts to 18ft-lbs using a properly calibrated torque wrench. Pneumatic/electric impact gun not recommended.u00a0make-porsche,make-porsche-model-boxster,make-porsche-model-boxster-chassis-986--1997-2004-,make-porsche-model-boxster-chassis-986--1997-2004--submodel-boxster--2-5l-,make-porsche-model-boxster-chassis-986--1997-2004--submodel-boxster--2-7l-,make-porsche-model-boxster-chassis-986--1997-2004--submodel-boxster-s--3-2l-,make-porsche-model-boxster-chassis-987--2005-2008-,make-porsche-model-boxster-chassis-987--2005-2008--submodel-boxster--2-7l-,make-porsche-model-boxster-chassis-987--2005-2008--submodel-boxster-s--3-2l-,make-porsche-model-boxster-chassis-987--2005-2008--submodel-boxster-s--3-4l-,make-porsche-model-boxster-chassis-987-2--2009-2012-,make-porsche-model-boxster-chassis-987-2--2009-2012--submodel-boxster--2-9l-,make-porsche-model-boxster-chassis-987-2--2009-2012--submodel-boxster-s--3-4l-,make-porsche-model-cayman,make-porsche-model-cayman-chassis-987--2005-2008-,make-porsche-model-cayman-chassis-987--2005-2008--submodel-cayman--2-7l-,make-porsche-model-cayman-chassis-987--2005-2008--submodel-cayman-s--3-4l-,make-porsche-model-cayman-chassis-987-2--2009-2012-,make-porsche-model-cayman-chassis-987-2--2009-2012--submodel-cayman--2-9l-,make-porsche-model-cayman-chassis-987-2--2009-2012--submodel-cayman-r--3-4l-,make-porsche-model-cayman-chassis-987-2--2009-2012--submodel-cayman-s--3-4l- 4850693373975 4850693373975_33010617843735 Porsche 986/987 Boxster/Cayman Camber Plates ccpboxman-1 https://hinzmotorsport.com/products/porsche-986-987-boxster-cayman-camber-plates Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/Porsche993CamberPlates_1ad152e6-911b-4568-ac3a-3a827696d8d1.jpg?v=1609957074 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 MCS 70mm 499.00 Porsche 986/987 Boxster/Cayman Camber Platesu00a0Whether you are looking to add more fender clearance for wider wheels and tires, improve the handling of your car, or both, camber plates are the perfect solution.We have been running Ground Control camber/caster plates on our car for over three years now with 40,000+ street and 1,000+ track miles on them. These have held up amazingly well and do not have any increased NVH at all.The Ground Control STREET/SPORT plate, a special version of our camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control.Camber plates are anodized and the rest of the components are zinc plated for corrosion resistance.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for roughly 3 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL.Configuration options include 2.25", 2.50", 60mm, 70mm or Stock springs, low profile dome or standard dome plates, and a Poly spring bushing.Lifetime guarantee on these camber plates, not including bearings.*Subframe and chassis variations affect total camber gain (up to 16mm negative camber possible)**The included Ground Control nut must be used with these camber plates!**Torque camber plate mounting nuts to 18ft-lbs using a properly calibrated torque wrench. Pneumatic/electric impact gun not recommended.u00a0make-porsche,make-porsche-model-boxster,make-porsche-model-boxster-chassis-986--1997-2004-,make-porsche-model-boxster-chassis-986--1997-2004--submodel-boxster--2-5l-,make-porsche-model-boxster-chassis-986--1997-2004--submodel-boxster--2-7l-,make-porsche-model-boxster-chassis-986--1997-2004--submodel-boxster-s--3-2l-,make-porsche-model-boxster-chassis-987--2005-2008-,make-porsche-model-boxster-chassis-987--2005-2008--submodel-boxster--2-7l-,make-porsche-model-boxster-chassis-987--2005-2008--submodel-boxster-s--3-2l-,make-porsche-model-boxster-chassis-987--2005-2008--submodel-boxster-s--3-4l-,make-porsche-model-boxster-chassis-987-2--2009-2012-,make-porsche-model-boxster-chassis-987-2--2009-2012--submodel-boxster--2-9l-,make-porsche-model-boxster-chassis-987-2--2009-2012--submodel-boxster-s--3-4l-,make-porsche-model-cayman,make-porsche-model-cayman-chassis-987--2005-2008-,make-porsche-model-cayman-chassis-987--2005-2008--submodel-cayman--2-7l-,make-porsche-model-cayman-chassis-987--2005-2008--submodel-cayman-s--3-4l-,make-porsche-model-cayman-chassis-987-2--2009-2012-,make-porsche-model-cayman-chassis-987-2--2009-2012--submodel-cayman--2-9l-,make-porsche-model-cayman-chassis-987-2--2009-2012--submodel-cayman-r--3-4l-,make-porsche-model-cayman-chassis-987-2--2009-2012--submodel-cayman-s--3-4l- 4850693373975 4850693373975_33010617909271 Porsche 986/987 Boxster/Cayman Camber Plates ccpboxman-1 https://hinzmotorsport.com/products/porsche-986-987-boxster-cayman-camber-plates Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/Porsche993CamberPlates_1ad152e6-911b-4568-ac3a-3a827696d8d1.jpg?v=1609957074 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 MCS 2.25" 499.00 Porsche 986/987 Boxster/Cayman Camber Platesu00a0Whether you are looking to add more fender clearance for wider wheels and tires, improve the handling of your car, or both, camber plates are the perfect solution.We have been running Ground Control camber/caster plates on our car for over three years now with 40,000+ street and 1,000+ track miles on them. These have held up amazingly well and do not have any increased NVH at all.The Ground Control STREET/SPORT plate, a special version of our camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control.Camber plates are anodized and the rest of the components are zinc plated for corrosion resistance.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for roughly 3 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL.Configuration options include 2.25", 2.50", 60mm, 70mm or Stock springs, low profile dome or standard dome plates, and a Poly spring bushing.Lifetime guarantee on these camber plates, not including bearings.*Subframe and chassis variations affect total camber gain (up to 16mm negative camber possible)**The included Ground Control nut must be used with these camber plates!**Torque camber plate mounting nuts to 18ft-lbs using a properly calibrated torque wrench. Pneumatic/electric impact gun not recommended.u00a0make-porsche,make-porsche-model-boxster,make-porsche-model-boxster-chassis-986--1997-2004-,make-porsche-model-boxster-chassis-986--1997-2004--submodel-boxster--2-5l-,make-porsche-model-boxster-chassis-986--1997-2004--submodel-boxster--2-7l-,make-porsche-model-boxster-chassis-986--1997-2004--submodel-boxster-s--3-2l-,make-porsche-model-boxster-chassis-987--2005-2008-,make-porsche-model-boxster-chassis-987--2005-2008--submodel-boxster--2-7l-,make-porsche-model-boxster-chassis-987--2005-2008--submodel-boxster-s--3-2l-,make-porsche-model-boxster-chassis-987--2005-2008--submodel-boxster-s--3-4l-,make-porsche-model-boxster-chassis-987-2--2009-2012-,make-porsche-model-boxster-chassis-987-2--2009-2012--submodel-boxster--2-9l-,make-porsche-model-boxster-chassis-987-2--2009-2012--submodel-boxster-s--3-4l-,make-porsche-model-cayman,make-porsche-model-cayman-chassis-987--2005-2008-,make-porsche-model-cayman-chassis-987--2005-2008--submodel-cayman--2-7l-,make-porsche-model-cayman-chassis-987--2005-2008--submodel-cayman-s--3-4l-,make-porsche-model-cayman-chassis-987-2--2009-2012-,make-porsche-model-cayman-chassis-987-2--2009-2012--submodel-cayman--2-9l-,make-porsche-model-cayman-chassis-987-2--2009-2012--submodel-cayman-r--3-4l-,make-porsche-model-cayman-chassis-987-2--2009-2012--submodel-cayman-s--3-4l- 4850693373975 4850693373975_33010618040343 Porsche 986/987 Boxster/Cayman Camber Plates ccpboxman-1 https://hinzmotorsport.com/products/porsche-986-987-boxster-cayman-camber-plates Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/Porsche993CamberPlates_1ad152e6-911b-4568-ac3a-3a827696d8d1.jpg?v=1609957074 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 Ohlins 60mm 499.00 Porsche 986/987 Boxster/Cayman Camber Platesu00a0Whether you are looking to add more fender clearance for wider wheels and tires, improve the handling of your car, or both, camber plates are the perfect solution.We have been running Ground Control camber/caster plates on our car for over three years now with 40,000+ street and 1,000+ track miles on them. These have held up amazingly well and do not have any increased NVH at all.The Ground Control STREET/SPORT plate, a special version of our camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control.Camber plates are anodized and the rest of the components are zinc plated for corrosion resistance.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for roughly 3 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL.Configuration options include 2.25", 2.50", 60mm, 70mm or Stock springs, low profile dome or standard dome plates, and a Poly spring bushing.Lifetime guarantee on these camber plates, not including bearings.*Subframe and chassis variations affect total camber gain (up to 16mm negative camber possible)**The included Ground Control nut must be used with these camber plates!**Torque camber plate mounting nuts to 18ft-lbs using a properly calibrated torque wrench. Pneumatic/electric impact gun not recommended.u00a0make-porsche,make-porsche-model-boxster,make-porsche-model-boxster-chassis-986--1997-2004-,make-porsche-model-boxster-chassis-986--1997-2004--submodel-boxster--2-5l-,make-porsche-model-boxster-chassis-986--1997-2004--submodel-boxster--2-7l-,make-porsche-model-boxster-chassis-986--1997-2004--submodel-boxster-s--3-2l-,make-porsche-model-boxster-chassis-987--2005-2008-,make-porsche-model-boxster-chassis-987--2005-2008--submodel-boxster--2-7l-,make-porsche-model-boxster-chassis-987--2005-2008--submodel-boxster-s--3-2l-,make-porsche-model-boxster-chassis-987--2005-2008--submodel-boxster-s--3-4l-,make-porsche-model-boxster-chassis-987-2--2009-2012-,make-porsche-model-boxster-chassis-987-2--2009-2012--submodel-boxster--2-9l-,make-porsche-model-boxster-chassis-987-2--2009-2012--submodel-boxster-s--3-4l-,make-porsche-model-cayman,make-porsche-model-cayman-chassis-987--2005-2008-,make-porsche-model-cayman-chassis-987--2005-2008--submodel-cayman--2-7l-,make-porsche-model-cayman-chassis-987--2005-2008--submodel-cayman-s--3-4l-,make-porsche-model-cayman-chassis-987-2--2009-2012-,make-porsche-model-cayman-chassis-987-2--2009-2012--submodel-cayman--2-9l-,make-porsche-model-cayman-chassis-987-2--2009-2012--submodel-cayman-r--3-4l-,make-porsche-model-cayman-chassis-987-2--2009-2012--submodel-cayman-s--3-4l- 4850693373975 4850693373975_33010618105879 Porsche 986/987 Boxster/Cayman Camber Plates ccpboxman-1 https://hinzmotorsport.com/products/porsche-986-987-boxster-cayman-camber-plates Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/Porsche993CamberPlates_1ad152e6-911b-4568-ac3a-3a827696d8d1.jpg?v=1609957074 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 Ohlins 70mm 499.00 Porsche 986/987 Boxster/Cayman Camber Platesu00a0Whether you are looking to add more fender clearance for wider wheels and tires, improve the handling of your car, or both, camber plates are the perfect solution.We have been running Ground Control camber/caster plates on our car for over three years now with 40,000+ street and 1,000+ track miles on them. These have held up amazingly well and do not have any increased NVH at all.The Ground Control STREET/SPORT plate, a special version of our camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control.Camber plates are anodized and the rest of the components are zinc plated for corrosion resistance.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for roughly 3 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL.Configuration options include 2.25", 2.50", 60mm, 70mm or Stock springs, low profile dome or standard dome plates, and a Poly spring bushing.Lifetime guarantee on these camber plates, not including bearings.*Subframe and chassis variations affect total camber gain (up to 16mm negative camber possible)**The included Ground Control nut must be used with these camber plates!**Torque camber plate mounting nuts to 18ft-lbs using a properly calibrated torque wrench. Pneumatic/electric impact gun not recommended.u00a0make-porsche,make-porsche-model-boxster,make-porsche-model-boxster-chassis-986--1997-2004-,make-porsche-model-boxster-chassis-986--1997-2004--submodel-boxster--2-5l-,make-porsche-model-boxster-chassis-986--1997-2004--submodel-boxster--2-7l-,make-porsche-model-boxster-chassis-986--1997-2004--submodel-boxster-s--3-2l-,make-porsche-model-boxster-chassis-987--2005-2008-,make-porsche-model-boxster-chassis-987--2005-2008--submodel-boxster--2-7l-,make-porsche-model-boxster-chassis-987--2005-2008--submodel-boxster-s--3-2l-,make-porsche-model-boxster-chassis-987--2005-2008--submodel-boxster-s--3-4l-,make-porsche-model-boxster-chassis-987-2--2009-2012-,make-porsche-model-boxster-chassis-987-2--2009-2012--submodel-boxster--2-9l-,make-porsche-model-boxster-chassis-987-2--2009-2012--submodel-boxster-s--3-4l-,make-porsche-model-cayman,make-porsche-model-cayman-chassis-987--2005-2008-,make-porsche-model-cayman-chassis-987--2005-2008--submodel-cayman--2-7l-,make-porsche-model-cayman-chassis-987--2005-2008--submodel-cayman-s--3-4l-,make-porsche-model-cayman-chassis-987-2--2009-2012-,make-porsche-model-cayman-chassis-987-2--2009-2012--submodel-cayman--2-9l-,make-porsche-model-cayman-chassis-987-2--2009-2012--submodel-cayman-r--3-4l-,make-porsche-model-cayman-chassis-987-2--2009-2012--submodel-cayman-s--3-4l- 4850693373975 4850693373975_33010618171415 Porsche 986/987 Boxster/Cayman Camber Plates ccpboxman-1 https://hinzmotorsport.com/products/porsche-986-987-boxster-cayman-camber-plates Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/Porsche993CamberPlates_1ad152e6-911b-4568-ac3a-3a827696d8d1.jpg?v=1609957074 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 Ohlins 2.25" 499.00 Porsche 986/987 Boxster/Cayman Camber Platesu00a0Whether you are looking to add more fender clearance for wider wheels and tires, improve the handling of your car, or both, camber plates are the perfect solution.We have been running Ground Control camber/caster plates on our car for over three years now with 40,000+ street and 1,000+ track miles on them. These have held up amazingly well and do not have any increased NVH at all.The Ground Control STREET/SPORT plate, a special version of our camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control.Camber plates are anodized and the rest of the components are zinc plated for corrosion resistance.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for roughly 3 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL.Configuration options include 2.25", 2.50", 60mm, 70mm or Stock springs, low profile dome or standard dome plates, and a Poly spring bushing.Lifetime guarantee on these camber plates, not including bearings.*Subframe and chassis variations affect total camber gain (up to 16mm negative camber possible)**The included Ground Control nut must be used with these camber plates!**Torque camber plate mounting nuts to 18ft-lbs using a properly calibrated torque wrench. Pneumatic/electric impact gun not recommended.u00a0make-porsche,make-porsche-model-boxster,make-porsche-model-boxster-chassis-986--1997-2004-,make-porsche-model-boxster-chassis-986--1997-2004--submodel-boxster--2-5l-,make-porsche-model-boxster-chassis-986--1997-2004--submodel-boxster--2-7l-,make-porsche-model-boxster-chassis-986--1997-2004--submodel-boxster-s--3-2l-,make-porsche-model-boxster-chassis-987--2005-2008-,make-porsche-model-boxster-chassis-987--2005-2008--submodel-boxster--2-7l-,make-porsche-model-boxster-chassis-987--2005-2008--submodel-boxster-s--3-2l-,make-porsche-model-boxster-chassis-987--2005-2008--submodel-boxster-s--3-4l-,make-porsche-model-boxster-chassis-987-2--2009-2012-,make-porsche-model-boxster-chassis-987-2--2009-2012--submodel-boxster--2-9l-,make-porsche-model-boxster-chassis-987-2--2009-2012--submodel-boxster-s--3-4l-,make-porsche-model-cayman,make-porsche-model-cayman-chassis-987--2005-2008-,make-porsche-model-cayman-chassis-987--2005-2008--submodel-cayman--2-7l-,make-porsche-model-cayman-chassis-987--2005-2008--submodel-cayman-s--3-4l-,make-porsche-model-cayman-chassis-987-2--2009-2012-,make-porsche-model-cayman-chassis-987-2--2009-2012--submodel-cayman--2-9l-,make-porsche-model-cayman-chassis-987-2--2009-2012--submodel-cayman-r--3-4l-,make-porsche-model-cayman-chassis-987-2--2009-2012--submodel-cayman-s--3-4l- 4850693373975 4850693373975_33010618368023 Porsche 986/987 Boxster/Cayman Camber Plates ccpboxman-1 https://hinzmotorsport.com/products/porsche-986-987-boxster-cayman-camber-plates Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/Porsche993CamberPlates_1ad152e6-911b-4568-ac3a-3a827696d8d1.jpg?v=1609957074 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 Other (Write under "Notes" section in shopping cart) Stock 499.00 Porsche 986/987 Boxster/Cayman Camber Platesu00a0Whether you are looking to add more fender clearance for wider wheels and tires, improve the handling of your car, or both, camber plates are the perfect solution.We have been running Ground Control camber/caster plates on our car for over three years now with 40,000+ street and 1,000+ track miles on them. These have held up amazingly well and do not have any increased NVH at all.The Ground Control STREET/SPORT plate, a special version of our camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control.Camber plates are anodized and the rest of the components are zinc plated for corrosion resistance.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for roughly 3 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL.Configuration options include 2.25", 2.50", 60mm, 70mm or Stock springs, low profile dome or standard dome plates, and a Poly spring bushing.Lifetime guarantee on these camber plates, not including bearings.*Subframe and chassis variations affect total camber gain (up to 16mm negative camber possible)**The included Ground Control nut must be used with these camber plates!**Torque camber plate mounting nuts to 18ft-lbs using a properly calibrated torque wrench. Pneumatic/electric impact gun not recommended.u00a0make-porsche,make-porsche-model-boxster,make-porsche-model-boxster-chassis-986--1997-2004-,make-porsche-model-boxster-chassis-986--1997-2004--submodel-boxster--2-5l-,make-porsche-model-boxster-chassis-986--1997-2004--submodel-boxster--2-7l-,make-porsche-model-boxster-chassis-986--1997-2004--submodel-boxster-s--3-2l-,make-porsche-model-boxster-chassis-987--2005-2008-,make-porsche-model-boxster-chassis-987--2005-2008--submodel-boxster--2-7l-,make-porsche-model-boxster-chassis-987--2005-2008--submodel-boxster-s--3-2l-,make-porsche-model-boxster-chassis-987--2005-2008--submodel-boxster-s--3-4l-,make-porsche-model-boxster-chassis-987-2--2009-2012-,make-porsche-model-boxster-chassis-987-2--2009-2012--submodel-boxster--2-9l-,make-porsche-model-boxster-chassis-987-2--2009-2012--submodel-boxster-s--3-4l-,make-porsche-model-cayman,make-porsche-model-cayman-chassis-987--2005-2008-,make-porsche-model-cayman-chassis-987--2005-2008--submodel-cayman--2-7l-,make-porsche-model-cayman-chassis-987--2005-2008--submodel-cayman-s--3-4l-,make-porsche-model-cayman-chassis-987-2--2009-2012-,make-porsche-model-cayman-chassis-987-2--2009-2012--submodel-cayman--2-9l-,make-porsche-model-cayman-chassis-987-2--2009-2012--submodel-cayman-r--3-4l-,make-porsche-model-cayman-chassis-987-2--2009-2012--submodel-cayman-s--3-4l- 4850693373975 4850693373975_33010618302487 Porsche 986/987 Boxster/Cayman Camber Plates ccpboxman-1 https://hinzmotorsport.com/products/porsche-986-987-boxster-cayman-camber-plates Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/Porsche993CamberPlates_1ad152e6-911b-4568-ac3a-3a827696d8d1.jpg?v=1609957074 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 Other (Write under "Notes" section in shopping cart) 60mm 499.00 Porsche 986/987 Boxster/Cayman Camber Platesu00a0Whether you are looking to add more fender clearance for wider wheels and tires, improve the handling of your car, or both, camber plates are the perfect solution.We have been running Ground Control camber/caster plates on our car for over three years now with 40,000+ street and 1,000+ track miles on them. These have held up amazingly well and do not have any increased NVH at all.The Ground Control STREET/SPORT plate, a special version of our camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control.Camber plates are anodized and the rest of the components are zinc plated for corrosion resistance.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for roughly 3 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL.Configuration options include 2.25", 2.50", 60mm, 70mm or Stock springs, low profile dome or standard dome plates, and a Poly spring bushing.Lifetime guarantee on these camber plates, not including bearings.*Subframe and chassis variations affect total camber gain (up to 16mm negative camber possible)**The included Ground Control nut must be used with these camber plates!**Torque camber plate mounting nuts to 18ft-lbs using a properly calibrated torque wrench. Pneumatic/electric impact gun not recommended.u00a0make-porsche,make-porsche-model-boxster,make-porsche-model-boxster-chassis-986--1997-2004-,make-porsche-model-boxster-chassis-986--1997-2004--submodel-boxster--2-5l-,make-porsche-model-boxster-chassis-986--1997-2004--submodel-boxster--2-7l-,make-porsche-model-boxster-chassis-986--1997-2004--submodel-boxster-s--3-2l-,make-porsche-model-boxster-chassis-987--2005-2008-,make-porsche-model-boxster-chassis-987--2005-2008--submodel-boxster--2-7l-,make-porsche-model-boxster-chassis-987--2005-2008--submodel-boxster-s--3-2l-,make-porsche-model-boxster-chassis-987--2005-2008--submodel-boxster-s--3-4l-,make-porsche-model-boxster-chassis-987-2--2009-2012-,make-porsche-model-boxster-chassis-987-2--2009-2012--submodel-boxster--2-9l-,make-porsche-model-boxster-chassis-987-2--2009-2012--submodel-boxster-s--3-4l-,make-porsche-model-cayman,make-porsche-model-cayman-chassis-987--2005-2008-,make-porsche-model-cayman-chassis-987--2005-2008--submodel-cayman--2-7l-,make-porsche-model-cayman-chassis-987--2005-2008--submodel-cayman-s--3-4l-,make-porsche-model-cayman-chassis-987-2--2009-2012-,make-porsche-model-cayman-chassis-987-2--2009-2012--submodel-cayman--2-9l-,make-porsche-model-cayman-chassis-987-2--2009-2012--submodel-cayman-r--3-4l-,make-porsche-model-cayman-chassis-987-2--2009-2012--submodel-cayman-s--3-4l- 4850693373975 4850693373975_33010618433559 Porsche 986/987 Boxster/Cayman Camber Plates ccpboxman-1 https://hinzmotorsport.com/products/porsche-986-987-boxster-cayman-camber-plates Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/Porsche993CamberPlates_1ad152e6-911b-4568-ac3a-3a827696d8d1.jpg?v=1609957074 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 Other (Write under "Notes" section in shopping cart) 70mm 499.00 Porsche 986/987 Boxster/Cayman Camber Platesu00a0Whether you are looking to add more fender clearance for wider wheels and tires, improve the handling of your car, or both, camber plates are the perfect solution.We have been running Ground Control camber/caster plates on our car for over three years now with 40,000+ street and 1,000+ track miles on them. These have held up amazingly well and do not have any increased NVH at all.The Ground Control STREET/SPORT plate, a special version of our camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control.Camber plates are anodized and the rest of the components are zinc plated for corrosion resistance.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for roughly 3 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL.Configuration options include 2.25", 2.50", 60mm, 70mm or Stock springs, low profile dome or standard dome plates, and a Poly spring bushing.Lifetime guarantee on these camber plates, not including bearings.*Subframe and chassis variations affect total camber gain (up to 16mm negative camber possible)**The included Ground Control nut must be used with these camber plates!**Torque camber plate mounting nuts to 18ft-lbs using a properly calibrated torque wrench. Pneumatic/electric impact gun not recommended.u00a0make-porsche,make-porsche-model-boxster,make-porsche-model-boxster-chassis-986--1997-2004-,make-porsche-model-boxster-chassis-986--1997-2004--submodel-boxster--2-5l-,make-porsche-model-boxster-chassis-986--1997-2004--submodel-boxster--2-7l-,make-porsche-model-boxster-chassis-986--1997-2004--submodel-boxster-s--3-2l-,make-porsche-model-boxster-chassis-987--2005-2008-,make-porsche-model-boxster-chassis-987--2005-2008--submodel-boxster--2-7l-,make-porsche-model-boxster-chassis-987--2005-2008--submodel-boxster-s--3-2l-,make-porsche-model-boxster-chassis-987--2005-2008--submodel-boxster-s--3-4l-,make-porsche-model-boxster-chassis-987-2--2009-2012-,make-porsche-model-boxster-chassis-987-2--2009-2012--submodel-boxster--2-9l-,make-porsche-model-boxster-chassis-987-2--2009-2012--submodel-boxster-s--3-4l-,make-porsche-model-cayman,make-porsche-model-cayman-chassis-987--2005-2008-,make-porsche-model-cayman-chassis-987--2005-2008--submodel-cayman--2-7l-,make-porsche-model-cayman-chassis-987--2005-2008--submodel-cayman-s--3-4l-,make-porsche-model-cayman-chassis-987-2--2009-2012-,make-porsche-model-cayman-chassis-987-2--2009-2012--submodel-cayman--2-9l-,make-porsche-model-cayman-chassis-987-2--2009-2012--submodel-cayman-r--3-4l-,make-porsche-model-cayman-chassis-987-2--2009-2012--submodel-cayman-s--3-4l- 4850693373975 4850693373975_33010618466327 Porsche 986/987 Boxster/Cayman Camber Plates ccpboxman-1 https://hinzmotorsport.com/products/porsche-986-987-boxster-cayman-camber-plates Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/Porsche993CamberPlates_1ad152e6-911b-4568-ac3a-3a827696d8d1.jpg?v=1609957074 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 Other (Write under "Notes" section in shopping cart) 2.25" 499.00 Porsche 986/987 Boxster/Cayman Camber Platesu00a0Whether you are looking to add more fender clearance for wider wheels and tires, improve the handling of your car, or both, camber plates are the perfect solution.We have been running Ground Control camber/caster plates on our car for over three years now with 40,000+ street and 1,000+ track miles on them. These have held up amazingly well and do not have any increased NVH at all.The Ground Control STREET/SPORT plate, a special version of our camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control.Camber plates are anodized and the rest of the components are zinc plated for corrosion resistance.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for roughly 3 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL.Configuration options include 2.25", 2.50", 60mm, 70mm or Stock springs, low profile dome or standard dome plates, and a Poly spring bushing.Lifetime guarantee on these camber plates, not including bearings.*Subframe and chassis variations affect total camber gain (up to 16mm negative camber possible)**The included Ground Control nut must be used with these camber plates!**Torque camber plate mounting nuts to 18ft-lbs using a properly calibrated torque wrench. Pneumatic/electric impact gun not recommended.u00a0make-porsche,make-porsche-model-boxster,make-porsche-model-boxster-chassis-986--1997-2004-,make-porsche-model-boxster-chassis-986--1997-2004--submodel-boxster--2-5l-,make-porsche-model-boxster-chassis-986--1997-2004--submodel-boxster--2-7l-,make-porsche-model-boxster-chassis-986--1997-2004--submodel-boxster-s--3-2l-,make-porsche-model-boxster-chassis-987--2005-2008-,make-porsche-model-boxster-chassis-987--2005-2008--submodel-boxster--2-7l-,make-porsche-model-boxster-chassis-987--2005-2008--submodel-boxster-s--3-2l-,make-porsche-model-boxster-chassis-987--2005-2008--submodel-boxster-s--3-4l-,make-porsche-model-boxster-chassis-987-2--2009-2012-,make-porsche-model-boxster-chassis-987-2--2009-2012--submodel-boxster--2-9l-,make-porsche-model-boxster-chassis-987-2--2009-2012--submodel-boxster-s--3-4l-,make-porsche-model-cayman,make-porsche-model-cayman-chassis-987--2005-2008-,make-porsche-model-cayman-chassis-987--2005-2008--submodel-cayman--2-7l-,make-porsche-model-cayman-chassis-987--2005-2008--submodel-cayman-s--3-4l-,make-porsche-model-cayman-chassis-987-2--2009-2012-,make-porsche-model-cayman-chassis-987-2--2009-2012--submodel-cayman--2-9l-,make-porsche-model-cayman-chassis-987-2--2009-2012--submodel-cayman-r--3-4l-,make-porsche-model-cayman-chassis-987-2--2009-2012--submodel-cayman-s--3-4l- 4850693373975 4850693373975_33010623905815 Porsche 986/987 Boxster/Cayman Camber Plates ccpboxman-1 https://hinzmotorsport.com/products/porsche-986-987-boxster-cayman-camber-plates Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/Porsche993CamberPlates_1ad152e6-911b-4568-ac3a-3a827696d8d1.jpg?v=1609957074 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 Ohlins Stock 499.00 Porsche 986/987 Boxster/Cayman Camber Platesu00a0Whether you are looking to add more fender clearance for wider wheels and tires, improve the handling of your car, or both, camber plates are the perfect solution.We have been running Ground Control camber/caster plates on our car for over three years now with 40,000+ street and 1,000+ track miles on them. These have held up amazingly well and do not have any increased NVH at all.The Ground Control STREET/SPORT plate, a special version of our camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control.Camber plates are anodized and the rest of the components are zinc plated for corrosion resistance.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for roughly 3 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL.Configuration options include 2.25", 2.50", 60mm, 70mm or Stock springs, low profile dome or standard dome plates, and a Poly spring bushing.Lifetime guarantee on these camber plates, not including bearings.*Subframe and chassis variations affect total camber gain (up to 16mm negative camber possible)**The included Ground Control nut must be used with these camber plates!**Torque camber plate mounting nuts to 18ft-lbs using a properly calibrated torque wrench. Pneumatic/electric impact gun not recommended.u00a0make-porsche,make-porsche-model-boxster,make-porsche-model-boxster-chassis-986--1997-2004-,make-porsche-model-boxster-chassis-986--1997-2004--submodel-boxster--2-5l-,make-porsche-model-boxster-chassis-986--1997-2004--submodel-boxster--2-7l-,make-porsche-model-boxster-chassis-986--1997-2004--submodel-boxster-s--3-2l-,make-porsche-model-boxster-chassis-987--2005-2008-,make-porsche-model-boxster-chassis-987--2005-2008--submodel-boxster--2-7l-,make-porsche-model-boxster-chassis-987--2005-2008--submodel-boxster-s--3-2l-,make-porsche-model-boxster-chassis-987--2005-2008--submodel-boxster-s--3-4l-,make-porsche-model-boxster-chassis-987-2--2009-2012-,make-porsche-model-boxster-chassis-987-2--2009-2012--submodel-boxster--2-9l-,make-porsche-model-boxster-chassis-987-2--2009-2012--submodel-boxster-s--3-4l-,make-porsche-model-cayman,make-porsche-model-cayman-chassis-987--2005-2008-,make-porsche-model-cayman-chassis-987--2005-2008--submodel-cayman--2-7l-,make-porsche-model-cayman-chassis-987--2005-2008--submodel-cayman-s--3-4l-,make-porsche-model-cayman-chassis-987-2--2009-2012-,make-porsche-model-cayman-chassis-987-2--2009-2012--submodel-cayman--2-9l-,make-porsche-model-cayman-chassis-987-2--2009-2012--submodel-cayman-r--3-4l-,make-porsche-model-cayman-chassis-987-2--2009-2012--submodel-cayman-s--3-4l- 4850691178519 4850691178519_33010605850647 Porsche 993 Camber/Caster Plates CCP993 https://hinzmotorsport.com/products/porsche-993-camber-caster-plates Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/Porsche993CamberPlates.jpg?v=1609956914 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 Stock 60mm 499.00 Porsche 993 Camber/Caster Platesu00a0Whether you are looking to add more fender clearance for wider wheels and tires, improve the handling of your car, or both, camber plates are the perfect solution.We have been running Ground Control camber/caster plates on our car for over three years now with 40,000+ street and 1,000+ track miles on them. These have held up amazingly well and do not have any increased NVH at all.The Ground Control STREET/SPORT plate, a special version of our camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control.Camber plates are anodized and the rest of the components are zinc plated for corrosion resistance.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for roughly 3 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL.Configuration options include 2.25", 2.50", 60mm, 70mm or Stock springs, low profile dome or standard dome plates, and a Poly spring bushing.Lifetime guarantee on these camber plates, not including bearings.*Subframe and chassis variations affect total camber gain (up to 16mm negative camber possible)**The included Ground Control nut must be used with these camber plates!**Torque camber plate mounting nuts to 18ft-lbs using a properly calibrated torque wrench. Pneumatic/electric impact gun not recommended.u00a0make-porsche,make-porsche-model-911,make-porsche-model-911-chassis-993--1994-1998-,make-porsche-model-911-chassis-993--1994-1998--submodel-carrera--quot-turbo-look-quot---3-6l-,make-porsche-model-911-chassis-993--1994-1998--submodel-carrera---carrera-4--3-6l-,make-porsche-model-911-chassis-993--1994-1998--submodel-carrera-4--quot-turbo-look-quot---3-6l-,make-porsche-model-911-chassis-993--1994-1998--submodel-carrera-rs--3-8l-,make-porsche-model-911-chassis-993--1994-1998--submodel-carrera-s---carrera-4s--3-8l-,make-porsche-model-911-chassis-993--1994-1998--submodel-gt2,make-porsche-model-911-chassis-993--1994-1998--submodel-rsr,make-porsche-model-911-chassis-993--1994-1998--submodel-turbo--3-6l-,make-porsche-model-911-chassis-993--1994-1998--submodel-turbo-s--3-6l- 4850691178519 4850691178519_33010609389591 Porsche 993 Camber/Caster Plates CCP993 https://hinzmotorsport.com/products/porsche-993-camber-caster-plates Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/Porsche993CamberPlates.jpg?v=1609956914 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 Stock Stock 499.00 Porsche 993 Camber/Caster Platesu00a0Whether you are looking to add more fender clearance for wider wheels and tires, improve the handling of your car, or both, camber plates are the perfect solution.We have been running Ground Control camber/caster plates on our car for over three years now with 40,000+ street and 1,000+ track miles on them. These have held up amazingly well and do not have any increased NVH at all.The Ground Control STREET/SPORT plate, a special version of our camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control.Camber plates are anodized and the rest of the components are zinc plated for corrosion resistance.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for roughly 3 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL.Configuration options include 2.25", 2.50", 60mm, 70mm or Stock springs, low profile dome or standard dome plates, and a Poly spring bushing.Lifetime guarantee on these camber plates, not including bearings.*Subframe and chassis variations affect total camber gain (up to 16mm negative camber possible)**The included Ground Control nut must be used with these camber plates!**Torque camber plate mounting nuts to 18ft-lbs using a properly calibrated torque wrench. Pneumatic/electric impact gun not recommended.u00a0make-porsche,make-porsche-model-911,make-porsche-model-911-chassis-993--1994-1998-,make-porsche-model-911-chassis-993--1994-1998--submodel-carrera--quot-turbo-look-quot---3-6l-,make-porsche-model-911-chassis-993--1994-1998--submodel-carrera---carrera-4--3-6l-,make-porsche-model-911-chassis-993--1994-1998--submodel-carrera-4--quot-turbo-look-quot---3-6l-,make-porsche-model-911-chassis-993--1994-1998--submodel-carrera-rs--3-8l-,make-porsche-model-911-chassis-993--1994-1998--submodel-carrera-s---carrera-4s--3-8l-,make-porsche-model-911-chassis-993--1994-1998--submodel-gt2,make-porsche-model-911-chassis-993--1994-1998--submodel-rsr,make-porsche-model-911-chassis-993--1994-1998--submodel-turbo--3-6l-,make-porsche-model-911-chassis-993--1994-1998--submodel-turbo-s--3-6l- 4850691178519 4850691178519_33010605883415 Porsche 993 Camber/Caster Plates CCP993 https://hinzmotorsport.com/products/porsche-993-camber-caster-plates Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/Porsche993CamberPlates.jpg?v=1609956914 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 Stock 70mm 499.00 Porsche 993 Camber/Caster Platesu00a0Whether you are looking to add more fender clearance for wider wheels and tires, improve the handling of your car, or both, camber plates are the perfect solution.We have been running Ground Control camber/caster plates on our car for over three years now with 40,000+ street and 1,000+ track miles on them. These have held up amazingly well and do not have any increased NVH at all.The Ground Control STREET/SPORT plate, a special version of our camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control.Camber plates are anodized and the rest of the components are zinc plated for corrosion resistance.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for roughly 3 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL.Configuration options include 2.25", 2.50", 60mm, 70mm or Stock springs, low profile dome or standard dome plates, and a Poly spring bushing.Lifetime guarantee on these camber plates, not including bearings.*Subframe and chassis variations affect total camber gain (up to 16mm negative camber possible)**The included Ground Control nut must be used with these camber plates!**Torque camber plate mounting nuts to 18ft-lbs using a properly calibrated torque wrench. Pneumatic/electric impact gun not recommended.u00a0make-porsche,make-porsche-model-911,make-porsche-model-911-chassis-993--1994-1998-,make-porsche-model-911-chassis-993--1994-1998--submodel-carrera--quot-turbo-look-quot---3-6l-,make-porsche-model-911-chassis-993--1994-1998--submodel-carrera---carrera-4--3-6l-,make-porsche-model-911-chassis-993--1994-1998--submodel-carrera-4--quot-turbo-look-quot---3-6l-,make-porsche-model-911-chassis-993--1994-1998--submodel-carrera-rs--3-8l-,make-porsche-model-911-chassis-993--1994-1998--submodel-carrera-s---carrera-4s--3-8l-,make-porsche-model-911-chassis-993--1994-1998--submodel-gt2,make-porsche-model-911-chassis-993--1994-1998--submodel-rsr,make-porsche-model-911-chassis-993--1994-1998--submodel-turbo--3-6l-,make-porsche-model-911-chassis-993--1994-1998--submodel-turbo-s--3-6l- 4850691178519 4850691178519_33010605916183 Porsche 993 Camber/Caster Plates CCP993 https://hinzmotorsport.com/products/porsche-993-camber-caster-plates Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/Porsche993CamberPlates.jpg?v=1609956914 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 Stock 2.25" 499.00 Porsche 993 Camber/Caster Platesu00a0Whether you are looking to add more fender clearance for wider wheels and tires, improve the handling of your car, or both, camber plates are the perfect solution.We have been running Ground Control camber/caster plates on our car for over three years now with 40,000+ street and 1,000+ track miles on them. These have held up amazingly well and do not have any increased NVH at all.The Ground Control STREET/SPORT plate, a special version of our camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control.Camber plates are anodized and the rest of the components are zinc plated for corrosion resistance.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for roughly 3 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL.Configuration options include 2.25", 2.50", 60mm, 70mm or Stock springs, low profile dome or standard dome plates, and a Poly spring bushing.Lifetime guarantee on these camber plates, not including bearings.*Subframe and chassis variations affect total camber gain (up to 16mm negative camber possible)**The included Ground Control nut must be used with these camber plates!**Torque camber plate mounting nuts to 18ft-lbs using a properly calibrated torque wrench. Pneumatic/electric impact gun not recommended.u00a0make-porsche,make-porsche-model-911,make-porsche-model-911-chassis-993--1994-1998-,make-porsche-model-911-chassis-993--1994-1998--submodel-carrera--quot-turbo-look-quot---3-6l-,make-porsche-model-911-chassis-993--1994-1998--submodel-carrera---carrera-4--3-6l-,make-porsche-model-911-chassis-993--1994-1998--submodel-carrera-4--quot-turbo-look-quot---3-6l-,make-porsche-model-911-chassis-993--1994-1998--submodel-carrera-rs--3-8l-,make-porsche-model-911-chassis-993--1994-1998--submodel-carrera-s---carrera-4s--3-8l-,make-porsche-model-911-chassis-993--1994-1998--submodel-gt2,make-porsche-model-911-chassis-993--1994-1998--submodel-rsr,make-porsche-model-911-chassis-993--1994-1998--submodel-turbo--3-6l-,make-porsche-model-911-chassis-993--1994-1998--submodel-turbo-s--3-6l- 4850691178519 4850691178519_33010605948951 Porsche 993 Camber/Caster Plates CCP993 https://hinzmotorsport.com/products/porsche-993-camber-caster-plates Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/Porsche993CamberPlates.jpg?v=1609956914 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 Stock 2.50" 499.00 Porsche 993 Camber/Caster Platesu00a0Whether you are looking to add more fender clearance for wider wheels and tires, improve the handling of your car, or both, camber plates are the perfect solution.We have been running Ground Control camber/caster plates on our car for over three years now with 40,000+ street and 1,000+ track miles on them. These have held up amazingly well and do not have any increased NVH at all.The Ground Control STREET/SPORT plate, a special version of our camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control.Camber plates are anodized and the rest of the components are zinc plated for corrosion resistance.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for roughly 3 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL.Configuration options include 2.25", 2.50", 60mm, 70mm or Stock springs, low profile dome or standard dome plates, and a Poly spring bushing.Lifetime guarantee on these camber plates, not including bearings.*Subframe and chassis variations affect total camber gain (up to 16mm negative camber possible)**The included Ground Control nut must be used with these camber plates!**Torque camber plate mounting nuts to 18ft-lbs using a properly calibrated torque wrench. Pneumatic/electric impact gun not recommended.u00a0make-porsche,make-porsche-model-911,make-porsche-model-911-chassis-993--1994-1998-,make-porsche-model-911-chassis-993--1994-1998--submodel-carrera--quot-turbo-look-quot---3-6l-,make-porsche-model-911-chassis-993--1994-1998--submodel-carrera---carrera-4--3-6l-,make-porsche-model-911-chassis-993--1994-1998--submodel-carrera-4--quot-turbo-look-quot---3-6l-,make-porsche-model-911-chassis-993--1994-1998--submodel-carrera-rs--3-8l-,make-porsche-model-911-chassis-993--1994-1998--submodel-carrera-s---carrera-4s--3-8l-,make-porsche-model-911-chassis-993--1994-1998--submodel-gt2,make-porsche-model-911-chassis-993--1994-1998--submodel-rsr,make-porsche-model-911-chassis-993--1994-1998--submodel-turbo--3-6l-,make-porsche-model-911-chassis-993--1994-1998--submodel-turbo-s--3-6l- 4850691178519 4850691178519_33010606014487 Porsche 993 Camber/Caster Plates CCP993 https://hinzmotorsport.com/products/porsche-993-camber-caster-plates Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/Porsche993CamberPlates.jpg?v=1609956914 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 AST 60mm 499.00 Porsche 993 Camber/Caster Platesu00a0Whether you are looking to add more fender clearance for wider wheels and tires, improve the handling of your car, or both, camber plates are the perfect solution.We have been running Ground Control camber/caster plates on our car for over three years now with 40,000+ street and 1,000+ track miles on them. These have held up amazingly well and do not have any increased NVH at all.The Ground Control STREET/SPORT plate, a special version of our camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control.Camber plates are anodized and the rest of the components are zinc plated for corrosion resistance.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for roughly 3 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL.Configuration options include 2.25", 2.50", 60mm, 70mm or Stock springs, low profile dome or standard dome plates, and a Poly spring bushing.Lifetime guarantee on these camber plates, not including bearings.*Subframe and chassis variations affect total camber gain (up to 16mm negative camber possible)**The included Ground Control nut must be used with these camber plates!**Torque camber plate mounting nuts to 18ft-lbs using a properly calibrated torque wrench. Pneumatic/electric impact gun not recommended.u00a0make-porsche,make-porsche-model-911,make-porsche-model-911-chassis-993--1994-1998-,make-porsche-model-911-chassis-993--1994-1998--submodel-carrera--quot-turbo-look-quot---3-6l-,make-porsche-model-911-chassis-993--1994-1998--submodel-carrera---carrera-4--3-6l-,make-porsche-model-911-chassis-993--1994-1998--submodel-carrera-4--quot-turbo-look-quot---3-6l-,make-porsche-model-911-chassis-993--1994-1998--submodel-carrera-rs--3-8l-,make-porsche-model-911-chassis-993--1994-1998--submodel-carrera-s---carrera-4s--3-8l-,make-porsche-model-911-chassis-993--1994-1998--submodel-gt2,make-porsche-model-911-chassis-993--1994-1998--submodel-rsr,make-porsche-model-911-chassis-993--1994-1998--submodel-turbo--3-6l-,make-porsche-model-911-chassis-993--1994-1998--submodel-turbo-s--3-6l- 4850691178519 4850691178519_33010609422359 Porsche 993 Camber/Caster Plates CCP993 https://hinzmotorsport.com/products/porsche-993-camber-caster-plates Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/Porsche993CamberPlates.jpg?v=1609956914 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 AST Stock 499.00 Porsche 993 Camber/Caster Platesu00a0Whether you are looking to add more fender clearance for wider wheels and tires, improve the handling of your car, or both, camber plates are the perfect solution.We have been running Ground Control camber/caster plates on our car for over three years now with 40,000+ street and 1,000+ track miles on them. These have held up amazingly well and do not have any increased NVH at all.The Ground Control STREET/SPORT plate, a special version of our camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control.Camber plates are anodized and the rest of the components are zinc plated for corrosion resistance.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for roughly 3 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL.Configuration options include 2.25", 2.50", 60mm, 70mm or Stock springs, low profile dome or standard dome plates, and a Poly spring bushing.Lifetime guarantee on these camber plates, not including bearings.*Subframe and chassis variations affect total camber gain (up to 16mm negative camber possible)**The included Ground Control nut must be used with these camber plates!**Torque camber plate mounting nuts to 18ft-lbs using a properly calibrated torque wrench. Pneumatic/electric impact gun not recommended.u00a0make-porsche,make-porsche-model-911,make-porsche-model-911-chassis-993--1994-1998-,make-porsche-model-911-chassis-993--1994-1998--submodel-carrera--quot-turbo-look-quot---3-6l-,make-porsche-model-911-chassis-993--1994-1998--submodel-carrera---carrera-4--3-6l-,make-porsche-model-911-chassis-993--1994-1998--submodel-carrera-4--quot-turbo-look-quot---3-6l-,make-porsche-model-911-chassis-993--1994-1998--submodel-carrera-rs--3-8l-,make-porsche-model-911-chassis-993--1994-1998--submodel-carrera-s---carrera-4s--3-8l-,make-porsche-model-911-chassis-993--1994-1998--submodel-gt2,make-porsche-model-911-chassis-993--1994-1998--submodel-rsr,make-porsche-model-911-chassis-993--1994-1998--submodel-turbo--3-6l-,make-porsche-model-911-chassis-993--1994-1998--submodel-turbo-s--3-6l- 4850691178519 4850691178519_33010606047255 Porsche 993 Camber/Caster Plates CCP993 https://hinzmotorsport.com/products/porsche-993-camber-caster-plates Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/Porsche993CamberPlates.jpg?v=1609956914 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 AST 70mm 499.00 Porsche 993 Camber/Caster Platesu00a0Whether you are looking to add more fender clearance for wider wheels and tires, improve the handling of your car, or both, camber plates are the perfect solution.We have been running Ground Control camber/caster plates on our car for over three years now with 40,000+ street and 1,000+ track miles on them. These have held up amazingly well and do not have any increased NVH at all.The Ground Control STREET/SPORT plate, a special version of our camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control.Camber plates are anodized and the rest of the components are zinc plated for corrosion resistance.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for roughly 3 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL.Configuration options include 2.25", 2.50", 60mm, 70mm or Stock springs, low profile dome or standard dome plates, and a Poly spring bushing.Lifetime guarantee on these camber plates, not including bearings.*Subframe and chassis variations affect total camber gain (up to 16mm negative camber possible)**The included Ground Control nut must be used with these camber plates!**Torque camber plate mounting nuts to 18ft-lbs using a properly calibrated torque wrench. Pneumatic/electric impact gun not recommended.u00a0make-porsche,make-porsche-model-911,make-porsche-model-911-chassis-993--1994-1998-,make-porsche-model-911-chassis-993--1994-1998--submodel-carrera--quot-turbo-look-quot---3-6l-,make-porsche-model-911-chassis-993--1994-1998--submodel-carrera---carrera-4--3-6l-,make-porsche-model-911-chassis-993--1994-1998--submodel-carrera-4--quot-turbo-look-quot---3-6l-,make-porsche-model-911-chassis-993--1994-1998--submodel-carrera-rs--3-8l-,make-porsche-model-911-chassis-993--1994-1998--submodel-carrera-s---carrera-4s--3-8l-,make-porsche-model-911-chassis-993--1994-1998--submodel-gt2,make-porsche-model-911-chassis-993--1994-1998--submodel-rsr,make-porsche-model-911-chassis-993--1994-1998--submodel-turbo--3-6l-,make-porsche-model-911-chassis-993--1994-1998--submodel-turbo-s--3-6l- 4850691178519 4850691178519_33010606080023 Porsche 993 Camber/Caster Plates CCP993 https://hinzmotorsport.com/products/porsche-993-camber-caster-plates Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/Porsche993CamberPlates.jpg?v=1609956914 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 AST 2.25" 499.00 Porsche 993 Camber/Caster Platesu00a0Whether you are looking to add more fender clearance for wider wheels and tires, improve the handling of your car, or both, camber plates are the perfect solution.We have been running Ground Control camber/caster plates on our car for over three years now with 40,000+ street and 1,000+ track miles on them. These have held up amazingly well and do not have any increased NVH at all.The Ground Control STREET/SPORT plate, a special version of our camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control.Camber plates are anodized and the rest of the components are zinc plated for corrosion resistance.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for roughly 3 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL.Configuration options include 2.25", 2.50", 60mm, 70mm or Stock springs, low profile dome or standard dome plates, and a Poly spring bushing.Lifetime guarantee on these camber plates, not including bearings.*Subframe and chassis variations affect total camber gain (up to 16mm negative camber possible)**The included Ground Control nut must be used with these camber plates!**Torque camber plate mounting nuts to 18ft-lbs using a properly calibrated torque wrench. Pneumatic/electric impact gun not recommended.u00a0make-porsche,make-porsche-model-911,make-porsche-model-911-chassis-993--1994-1998-,make-porsche-model-911-chassis-993--1994-1998--submodel-carrera--quot-turbo-look-quot---3-6l-,make-porsche-model-911-chassis-993--1994-1998--submodel-carrera---carrera-4--3-6l-,make-porsche-model-911-chassis-993--1994-1998--submodel-carrera-4--quot-turbo-look-quot---3-6l-,make-porsche-model-911-chassis-993--1994-1998--submodel-carrera-rs--3-8l-,make-porsche-model-911-chassis-993--1994-1998--submodel-carrera-s---carrera-4s--3-8l-,make-porsche-model-911-chassis-993--1994-1998--submodel-gt2,make-porsche-model-911-chassis-993--1994-1998--submodel-rsr,make-porsche-model-911-chassis-993--1994-1998--submodel-turbo--3-6l-,make-porsche-model-911-chassis-993--1994-1998--submodel-turbo-s--3-6l- 4850691178519 4850691178519_33010606112791 Porsche 993 Camber/Caster Plates CCP993 https://hinzmotorsport.com/products/porsche-993-camber-caster-plates Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/Porsche993CamberPlates.jpg?v=1609956914 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 AST 2.50" 499.00 Porsche 993 Camber/Caster Platesu00a0Whether you are looking to add more fender clearance for wider wheels and tires, improve the handling of your car, or both, camber plates are the perfect solution.We have been running Ground Control camber/caster plates on our car for over three years now with 40,000+ street and 1,000+ track miles on them. These have held up amazingly well and do not have any increased NVH at all.The Ground Control STREET/SPORT plate, a special version of our camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control.Camber plates are anodized and the rest of the components are zinc plated for corrosion resistance.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for roughly 3 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL.Configuration options include 2.25", 2.50", 60mm, 70mm or Stock springs, low profile dome or standard dome plates, and a Poly spring bushing.Lifetime guarantee on these camber plates, not including bearings.*Subframe and chassis variations affect total camber gain (up to 16mm negative camber possible)**The included Ground Control nut must be used with these camber plates!**Torque camber plate mounting nuts to 18ft-lbs using a properly calibrated torque wrench. Pneumatic/electric impact gun not recommended.u00a0make-porsche,make-porsche-model-911,make-porsche-model-911-chassis-993--1994-1998-,make-porsche-model-911-chassis-993--1994-1998--submodel-carrera--quot-turbo-look-quot---3-6l-,make-porsche-model-911-chassis-993--1994-1998--submodel-carrera---carrera-4--3-6l-,make-porsche-model-911-chassis-993--1994-1998--submodel-carrera-4--quot-turbo-look-quot---3-6l-,make-porsche-model-911-chassis-993--1994-1998--submodel-carrera-rs--3-8l-,make-porsche-model-911-chassis-993--1994-1998--submodel-carrera-s---carrera-4s--3-8l-,make-porsche-model-911-chassis-993--1994-1998--submodel-gt2,make-porsche-model-911-chassis-993--1994-1998--submodel-rsr,make-porsche-model-911-chassis-993--1994-1998--submodel-turbo--3-6l-,make-porsche-model-911-chassis-993--1994-1998--submodel-turbo-s--3-6l- 4850691178519 4850691178519_33010606178327 Porsche 993 Camber/Caster Plates CCP993 https://hinzmotorsport.com/products/porsche-993-camber-caster-plates Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/Porsche993CamberPlates.jpg?v=1609956914 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 Bilstein 60mm 499.00 Porsche 993 Camber/Caster Platesu00a0Whether you are looking to add more fender clearance for wider wheels and tires, improve the handling of your car, or both, camber plates are the perfect solution.We have been running Ground Control camber/caster plates on our car for over three years now with 40,000+ street and 1,000+ track miles on them. These have held up amazingly well and do not have any increased NVH at all.The Ground Control STREET/SPORT plate, a special version of our camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control.Camber plates are anodized and the rest of the components are zinc plated for corrosion resistance.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for roughly 3 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL.Configuration options include 2.25", 2.50", 60mm, 70mm or Stock springs, low profile dome or standard dome plates, and a Poly spring bushing.Lifetime guarantee on these camber plates, not including bearings.*Subframe and chassis variations affect total camber gain (up to 16mm negative camber possible)**The included Ground Control nut must be used with these camber plates!**Torque camber plate mounting nuts to 18ft-lbs using a properly calibrated torque wrench. Pneumatic/electric impact gun not recommended.u00a0make-porsche,make-porsche-model-911,make-porsche-model-911-chassis-993--1994-1998-,make-porsche-model-911-chassis-993--1994-1998--submodel-carrera--quot-turbo-look-quot---3-6l-,make-porsche-model-911-chassis-993--1994-1998--submodel-carrera---carrera-4--3-6l-,make-porsche-model-911-chassis-993--1994-1998--submodel-carrera-4--quot-turbo-look-quot---3-6l-,make-porsche-model-911-chassis-993--1994-1998--submodel-carrera-rs--3-8l-,make-porsche-model-911-chassis-993--1994-1998--submodel-carrera-s---carrera-4s--3-8l-,make-porsche-model-911-chassis-993--1994-1998--submodel-gt2,make-porsche-model-911-chassis-993--1994-1998--submodel-rsr,make-porsche-model-911-chassis-993--1994-1998--submodel-turbo--3-6l-,make-porsche-model-911-chassis-993--1994-1998--submodel-turbo-s--3-6l- 4850691178519 4850691178519_33010609455127 Porsche 993 Camber/Caster Plates CCP993 https://hinzmotorsport.com/products/porsche-993-camber-caster-plates Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/Porsche993CamberPlates.jpg?v=1609956914 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 Bilstein Stock 499.00 Porsche 993 Camber/Caster Platesu00a0Whether you are looking to add more fender clearance for wider wheels and tires, improve the handling of your car, or both, camber plates are the perfect solution.We have been running Ground Control camber/caster plates on our car for over three years now with 40,000+ street and 1,000+ track miles on them. These have held up amazingly well and do not have any increased NVH at all.The Ground Control STREET/SPORT plate, a special version of our camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control.Camber plates are anodized and the rest of the components are zinc plated for corrosion resistance.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for roughly 3 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL.Configuration options include 2.25", 2.50", 60mm, 70mm or Stock springs, low profile dome or standard dome plates, and a Poly spring bushing.Lifetime guarantee on these camber plates, not including bearings.*Subframe and chassis variations affect total camber gain (up to 16mm negative camber possible)**The included Ground Control nut must be used with these camber plates!**Torque camber plate mounting nuts to 18ft-lbs using a properly calibrated torque wrench. Pneumatic/electric impact gun not recommended.u00a0make-porsche,make-porsche-model-911,make-porsche-model-911-chassis-993--1994-1998-,make-porsche-model-911-chassis-993--1994-1998--submodel-carrera--quot-turbo-look-quot---3-6l-,make-porsche-model-911-chassis-993--1994-1998--submodel-carrera---carrera-4--3-6l-,make-porsche-model-911-chassis-993--1994-1998--submodel-carrera-4--quot-turbo-look-quot---3-6l-,make-porsche-model-911-chassis-993--1994-1998--submodel-carrera-rs--3-8l-,make-porsche-model-911-chassis-993--1994-1998--submodel-carrera-s---carrera-4s--3-8l-,make-porsche-model-911-chassis-993--1994-1998--submodel-gt2,make-porsche-model-911-chassis-993--1994-1998--submodel-rsr,make-porsche-model-911-chassis-993--1994-1998--submodel-turbo--3-6l-,make-porsche-model-911-chassis-993--1994-1998--submodel-turbo-s--3-6l- 4850691178519 4850691178519_33010606211095 Porsche 993 Camber/Caster Plates CCP993 https://hinzmotorsport.com/products/porsche-993-camber-caster-plates Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/Porsche993CamberPlates.jpg?v=1609956914 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 Bilstein 70mm 499.00 Porsche 993 Camber/Caster Platesu00a0Whether you are looking to add more fender clearance for wider wheels and tires, improve the handling of your car, or both, camber plates are the perfect solution.We have been running Ground Control camber/caster plates on our car for over three years now with 40,000+ street and 1,000+ track miles on them. These have held up amazingly well and do not have any increased NVH at all.The Ground Control STREET/SPORT plate, a special version of our camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control.Camber plates are anodized and the rest of the components are zinc plated for corrosion resistance.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for roughly 3 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL.Configuration options include 2.25", 2.50", 60mm, 70mm or Stock springs, low profile dome or standard dome plates, and a Poly spring bushing.Lifetime guarantee on these camber plates, not including bearings.*Subframe and chassis variations affect total camber gain (up to 16mm negative camber possible)**The included Ground Control nut must be used with these camber plates!**Torque camber plate mounting nuts to 18ft-lbs using a properly calibrated torque wrench. Pneumatic/electric impact gun not recommended.u00a0make-porsche,make-porsche-model-911,make-porsche-model-911-chassis-993--1994-1998-,make-porsche-model-911-chassis-993--1994-1998--submodel-carrera--quot-turbo-look-quot---3-6l-,make-porsche-model-911-chassis-993--1994-1998--submodel-carrera---carrera-4--3-6l-,make-porsche-model-911-chassis-993--1994-1998--submodel-carrera-4--quot-turbo-look-quot---3-6l-,make-porsche-model-911-chassis-993--1994-1998--submodel-carrera-rs--3-8l-,make-porsche-model-911-chassis-993--1994-1998--submodel-carrera-s---carrera-4s--3-8l-,make-porsche-model-911-chassis-993--1994-1998--submodel-gt2,make-porsche-model-911-chassis-993--1994-1998--submodel-rsr,make-porsche-model-911-chassis-993--1994-1998--submodel-turbo--3-6l-,make-porsche-model-911-chassis-993--1994-1998--submodel-turbo-s--3-6l- 4850691178519 4850691178519_33010606243863 Porsche 993 Camber/Caster Plates CCP993 https://hinzmotorsport.com/products/porsche-993-camber-caster-plates Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/Porsche993CamberPlates.jpg?v=1609956914 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 Bilstein 2.25" 499.00 Porsche 993 Camber/Caster Platesu00a0Whether you are looking to add more fender clearance for wider wheels and tires, improve the handling of your car, or both, camber plates are the perfect solution.We have been running Ground Control camber/caster plates on our car for over three years now with 40,000+ street and 1,000+ track miles on them. These have held up amazingly well and do not have any increased NVH at all.The Ground Control STREET/SPORT plate, a special version of our camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control.Camber plates are anodized and the rest of the components are zinc plated for corrosion resistance.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for roughly 3 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL.Configuration options include 2.25", 2.50", 60mm, 70mm or Stock springs, low profile dome or standard dome plates, and a Poly spring bushing.Lifetime guarantee on these camber plates, not including bearings.*Subframe and chassis variations affect total camber gain (up to 16mm negative camber possible)**The included Ground Control nut must be used with these camber plates!**Torque camber plate mounting nuts to 18ft-lbs using a properly calibrated torque wrench. Pneumatic/electric impact gun not recommended.u00a0make-porsche,make-porsche-model-911,make-porsche-model-911-chassis-993--1994-1998-,make-porsche-model-911-chassis-993--1994-1998--submodel-carrera--quot-turbo-look-quot---3-6l-,make-porsche-model-911-chassis-993--1994-1998--submodel-carrera---carrera-4--3-6l-,make-porsche-model-911-chassis-993--1994-1998--submodel-carrera-4--quot-turbo-look-quot---3-6l-,make-porsche-model-911-chassis-993--1994-1998--submodel-carrera-rs--3-8l-,make-porsche-model-911-chassis-993--1994-1998--submodel-carrera-s---carrera-4s--3-8l-,make-porsche-model-911-chassis-993--1994-1998--submodel-gt2,make-porsche-model-911-chassis-993--1994-1998--submodel-rsr,make-porsche-model-911-chassis-993--1994-1998--submodel-turbo--3-6l-,make-porsche-model-911-chassis-993--1994-1998--submodel-turbo-s--3-6l- 4850691178519 4850691178519_33010606276631 Porsche 993 Camber/Caster Plates CCP993 https://hinzmotorsport.com/products/porsche-993-camber-caster-plates Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/Porsche993CamberPlates.jpg?v=1609956914 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 Bilstein 2.50" 499.00 Porsche 993 Camber/Caster Platesu00a0Whether you are looking to add more fender clearance for wider wheels and tires, improve the handling of your car, or both, camber plates are the perfect solution.We have been running Ground Control camber/caster plates on our car for over three years now with 40,000+ street and 1,000+ track miles on them. These have held up amazingly well and do not have any increased NVH at all.The Ground Control STREET/SPORT plate, a special version of our camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control.Camber plates are anodized and the rest of the components are zinc plated for corrosion resistance.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for roughly 3 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL.Configuration options include 2.25", 2.50", 60mm, 70mm or Stock springs, low profile dome or standard dome plates, and a Poly spring bushing.Lifetime guarantee on these camber plates, not including bearings.*Subframe and chassis variations affect total camber gain (up to 16mm negative camber possible)**The included Ground Control nut must be used with these camber plates!**Torque camber plate mounting nuts to 18ft-lbs using a properly calibrated torque wrench. Pneumatic/electric impact gun not recommended.u00a0make-porsche,make-porsche-model-911,make-porsche-model-911-chassis-993--1994-1998-,make-porsche-model-911-chassis-993--1994-1998--submodel-carrera--quot-turbo-look-quot---3-6l-,make-porsche-model-911-chassis-993--1994-1998--submodel-carrera---carrera-4--3-6l-,make-porsche-model-911-chassis-993--1994-1998--submodel-carrera-4--quot-turbo-look-quot---3-6l-,make-porsche-model-911-chassis-993--1994-1998--submodel-carrera-rs--3-8l-,make-porsche-model-911-chassis-993--1994-1998--submodel-carrera-s---carrera-4s--3-8l-,make-porsche-model-911-chassis-993--1994-1998--submodel-gt2,make-porsche-model-911-chassis-993--1994-1998--submodel-rsr,make-porsche-model-911-chassis-993--1994-1998--submodel-turbo--3-6l-,make-porsche-model-911-chassis-993--1994-1998--submodel-turbo-s--3-6l- 4850691178519 4850691178519_33010606342167 Porsche 993 Camber/Caster Plates CCP993 https://hinzmotorsport.com/products/porsche-993-camber-caster-plates Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/Porsche993CamberPlates.jpg?v=1609956914 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 JRZ 60mm 499.00 Porsche 993 Camber/Caster Platesu00a0Whether you are looking to add more fender clearance for wider wheels and tires, improve the handling of your car, or both, camber plates are the perfect solution.We have been running Ground Control camber/caster plates on our car for over three years now with 40,000+ street and 1,000+ track miles on them. These have held up amazingly well and do not have any increased NVH at all.The Ground Control STREET/SPORT plate, a special version of our camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control.Camber plates are anodized and the rest of the components are zinc plated for corrosion resistance.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for roughly 3 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL.Configuration options include 2.25", 2.50", 60mm, 70mm or Stock springs, low profile dome or standard dome plates, and a Poly spring bushing.Lifetime guarantee on these camber plates, not including bearings.*Subframe and chassis variations affect total camber gain (up to 16mm negative camber possible)**The included Ground Control nut must be used with these camber plates!**Torque camber plate mounting nuts to 18ft-lbs using a properly calibrated torque wrench. Pneumatic/electric impact gun not recommended.u00a0make-porsche,make-porsche-model-911,make-porsche-model-911-chassis-993--1994-1998-,make-porsche-model-911-chassis-993--1994-1998--submodel-carrera--quot-turbo-look-quot---3-6l-,make-porsche-model-911-chassis-993--1994-1998--submodel-carrera---carrera-4--3-6l-,make-porsche-model-911-chassis-993--1994-1998--submodel-carrera-4--quot-turbo-look-quot---3-6l-,make-porsche-model-911-chassis-993--1994-1998--submodel-carrera-rs--3-8l-,make-porsche-model-911-chassis-993--1994-1998--submodel-carrera-s---carrera-4s--3-8l-,make-porsche-model-911-chassis-993--1994-1998--submodel-gt2,make-porsche-model-911-chassis-993--1994-1998--submodel-rsr,make-porsche-model-911-chassis-993--1994-1998--submodel-turbo--3-6l-,make-porsche-model-911-chassis-993--1994-1998--submodel-turbo-s--3-6l- 4850691178519 4850691178519_33010609487895 Porsche 993 Camber/Caster Plates CCP993 https://hinzmotorsport.com/products/porsche-993-camber-caster-plates Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/Porsche993CamberPlates.jpg?v=1609956914 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 JRZ Stock 499.00 Porsche 993 Camber/Caster Platesu00a0Whether you are looking to add more fender clearance for wider wheels and tires, improve the handling of your car, or both, camber plates are the perfect solution.We have been running Ground Control camber/caster plates on our car for over three years now with 40,000+ street and 1,000+ track miles on them. These have held up amazingly well and do not have any increased NVH at all.The Ground Control STREET/SPORT plate, a special version of our camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control.Camber plates are anodized and the rest of the components are zinc plated for corrosion resistance.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for roughly 3 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL.Configuration options include 2.25", 2.50", 60mm, 70mm or Stock springs, low profile dome or standard dome plates, and a Poly spring bushing.Lifetime guarantee on these camber plates, not including bearings.*Subframe and chassis variations affect total camber gain (up to 16mm negative camber possible)**The included Ground Control nut must be used with these camber plates!**Torque camber plate mounting nuts to 18ft-lbs using a properly calibrated torque wrench. Pneumatic/electric impact gun not recommended.u00a0make-porsche,make-porsche-model-911,make-porsche-model-911-chassis-993--1994-1998-,make-porsche-model-911-chassis-993--1994-1998--submodel-carrera--quot-turbo-look-quot---3-6l-,make-porsche-model-911-chassis-993--1994-1998--submodel-carrera---carrera-4--3-6l-,make-porsche-model-911-chassis-993--1994-1998--submodel-carrera-4--quot-turbo-look-quot---3-6l-,make-porsche-model-911-chassis-993--1994-1998--submodel-carrera-rs--3-8l-,make-porsche-model-911-chassis-993--1994-1998--submodel-carrera-s---carrera-4s--3-8l-,make-porsche-model-911-chassis-993--1994-1998--submodel-gt2,make-porsche-model-911-chassis-993--1994-1998--submodel-rsr,make-porsche-model-911-chassis-993--1994-1998--submodel-turbo--3-6l-,make-porsche-model-911-chassis-993--1994-1998--submodel-turbo-s--3-6l- 4850691178519 4850691178519_33010606374935 Porsche 993 Camber/Caster Plates CCP993 https://hinzmotorsport.com/products/porsche-993-camber-caster-plates Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/Porsche993CamberPlates.jpg?v=1609956914 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 JRZ 70mm 499.00 Porsche 993 Camber/Caster Platesu00a0Whether you are looking to add more fender clearance for wider wheels and tires, improve the handling of your car, or both, camber plates are the perfect solution.We have been running Ground Control camber/caster plates on our car for over three years now with 40,000+ street and 1,000+ track miles on them. These have held up amazingly well and do not have any increased NVH at all.The Ground Control STREET/SPORT plate, a special version of our camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control.Camber plates are anodized and the rest of the components are zinc plated for corrosion resistance.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for roughly 3 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL.Configuration options include 2.25", 2.50", 60mm, 70mm or Stock springs, low profile dome or standard dome plates, and a Poly spring bushing.Lifetime guarantee on these camber plates, not including bearings.*Subframe and chassis variations affect total camber gain (up to 16mm negative camber possible)**The included Ground Control nut must be used with these camber plates!**Torque camber plate mounting nuts to 18ft-lbs using a properly calibrated torque wrench. Pneumatic/electric impact gun not recommended.u00a0make-porsche,make-porsche-model-911,make-porsche-model-911-chassis-993--1994-1998-,make-porsche-model-911-chassis-993--1994-1998--submodel-carrera--quot-turbo-look-quot---3-6l-,make-porsche-model-911-chassis-993--1994-1998--submodel-carrera---carrera-4--3-6l-,make-porsche-model-911-chassis-993--1994-1998--submodel-carrera-4--quot-turbo-look-quot---3-6l-,make-porsche-model-911-chassis-993--1994-1998--submodel-carrera-rs--3-8l-,make-porsche-model-911-chassis-993--1994-1998--submodel-carrera-s---carrera-4s--3-8l-,make-porsche-model-911-chassis-993--1994-1998--submodel-gt2,make-porsche-model-911-chassis-993--1994-1998--submodel-rsr,make-porsche-model-911-chassis-993--1994-1998--submodel-turbo--3-6l-,make-porsche-model-911-chassis-993--1994-1998--submodel-turbo-s--3-6l- 4850691178519 4850691178519_33010606407703 Porsche 993 Camber/Caster Plates CCP993 https://hinzmotorsport.com/products/porsche-993-camber-caster-plates Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/Porsche993CamberPlates.jpg?v=1609956914 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 JRZ 2.25" 499.00 Porsche 993 Camber/Caster Platesu00a0Whether you are looking to add more fender clearance for wider wheels and tires, improve the handling of your car, or both, camber plates are the perfect solution.We have been running Ground Control camber/caster plates on our car for over three years now with 40,000+ street and 1,000+ track miles on them. These have held up amazingly well and do not have any increased NVH at all.The Ground Control STREET/SPORT plate, a special version of our camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control.Camber plates are anodized and the rest of the components are zinc plated for corrosion resistance.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for roughly 3 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL.Configuration options include 2.25", 2.50", 60mm, 70mm or Stock springs, low profile dome or standard dome plates, and a Poly spring bushing.Lifetime guarantee on these camber plates, not including bearings.*Subframe and chassis variations affect total camber gain (up to 16mm negative camber possible)**The included Ground Control nut must be used with these camber plates!**Torque camber plate mounting nuts to 18ft-lbs using a properly calibrated torque wrench. Pneumatic/electric impact gun not recommended.u00a0make-porsche,make-porsche-model-911,make-porsche-model-911-chassis-993--1994-1998-,make-porsche-model-911-chassis-993--1994-1998--submodel-carrera--quot-turbo-look-quot---3-6l-,make-porsche-model-911-chassis-993--1994-1998--submodel-carrera---carrera-4--3-6l-,make-porsche-model-911-chassis-993--1994-1998--submodel-carrera-4--quot-turbo-look-quot---3-6l-,make-porsche-model-911-chassis-993--1994-1998--submodel-carrera-rs--3-8l-,make-porsche-model-911-chassis-993--1994-1998--submodel-carrera-s---carrera-4s--3-8l-,make-porsche-model-911-chassis-993--1994-1998--submodel-gt2,make-porsche-model-911-chassis-993--1994-1998--submodel-rsr,make-porsche-model-911-chassis-993--1994-1998--submodel-turbo--3-6l-,make-porsche-model-911-chassis-993--1994-1998--submodel-turbo-s--3-6l- 4850691178519 4850691178519_33010606440471 Porsche 993 Camber/Caster Plates CCP993 https://hinzmotorsport.com/products/porsche-993-camber-caster-plates Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/Porsche993CamberPlates.jpg?v=1609956914 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 JRZ 2.50" 499.00 Porsche 993 Camber/Caster Platesu00a0Whether you are looking to add more fender clearance for wider wheels and tires, improve the handling of your car, or both, camber plates are the perfect solution.We have been running Ground Control camber/caster plates on our car for over three years now with 40,000+ street and 1,000+ track miles on them. These have held up amazingly well and do not have any increased NVH at all.The Ground Control STREET/SPORT plate, a special version of our camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control.Camber plates are anodized and the rest of the components are zinc plated for corrosion resistance.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for roughly 3 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL.Configuration options include 2.25", 2.50", 60mm, 70mm or Stock springs, low profile dome or standard dome plates, and a Poly spring bushing.Lifetime guarantee on these camber plates, not including bearings.*Subframe and chassis variations affect total camber gain (up to 16mm negative camber possible)**The included Ground Control nut must be used with these camber plates!**Torque camber plate mounting nuts to 18ft-lbs using a properly calibrated torque wrench. Pneumatic/electric impact gun not recommended.u00a0make-porsche,make-porsche-model-911,make-porsche-model-911-chassis-993--1994-1998-,make-porsche-model-911-chassis-993--1994-1998--submodel-carrera--quot-turbo-look-quot---3-6l-,make-porsche-model-911-chassis-993--1994-1998--submodel-carrera---carrera-4--3-6l-,make-porsche-model-911-chassis-993--1994-1998--submodel-carrera-4--quot-turbo-look-quot---3-6l-,make-porsche-model-911-chassis-993--1994-1998--submodel-carrera-rs--3-8l-,make-porsche-model-911-chassis-993--1994-1998--submodel-carrera-s---carrera-4s--3-8l-,make-porsche-model-911-chassis-993--1994-1998--submodel-gt2,make-porsche-model-911-chassis-993--1994-1998--submodel-rsr,make-porsche-model-911-chassis-993--1994-1998--submodel-turbo--3-6l-,make-porsche-model-911-chassis-993--1994-1998--submodel-turbo-s--3-6l- 4850691178519 4850691178519_33010606506007 Porsche 993 Camber/Caster Plates CCP993 https://hinzmotorsport.com/products/porsche-993-camber-caster-plates Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/Porsche993CamberPlates.jpg?v=1609956914 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 KW 60mm 499.00 Porsche 993 Camber/Caster Platesu00a0Whether you are looking to add more fender clearance for wider wheels and tires, improve the handling of your car, or both, camber plates are the perfect solution.We have been running Ground Control camber/caster plates on our car for over three years now with 40,000+ street and 1,000+ track miles on them. These have held up amazingly well and do not have any increased NVH at all.The Ground Control STREET/SPORT plate, a special version of our camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control.Camber plates are anodized and the rest of the components are zinc plated for corrosion resistance.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for roughly 3 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL.Configuration options include 2.25", 2.50", 60mm, 70mm or Stock springs, low profile dome or standard dome plates, and a Poly spring bushing.Lifetime guarantee on these camber plates, not including bearings.*Subframe and chassis variations affect total camber gain (up to 16mm negative camber possible)**The included Ground Control nut must be used with these camber plates!**Torque camber plate mounting nuts to 18ft-lbs using a properly calibrated torque wrench. Pneumatic/electric impact gun not recommended.u00a0make-porsche,make-porsche-model-911,make-porsche-model-911-chassis-993--1994-1998-,make-porsche-model-911-chassis-993--1994-1998--submodel-carrera--quot-turbo-look-quot---3-6l-,make-porsche-model-911-chassis-993--1994-1998--submodel-carrera---carrera-4--3-6l-,make-porsche-model-911-chassis-993--1994-1998--submodel-carrera-4--quot-turbo-look-quot---3-6l-,make-porsche-model-911-chassis-993--1994-1998--submodel-carrera-rs--3-8l-,make-porsche-model-911-chassis-993--1994-1998--submodel-carrera-s---carrera-4s--3-8l-,make-porsche-model-911-chassis-993--1994-1998--submodel-gt2,make-porsche-model-911-chassis-993--1994-1998--submodel-rsr,make-porsche-model-911-chassis-993--1994-1998--submodel-turbo--3-6l-,make-porsche-model-911-chassis-993--1994-1998--submodel-turbo-s--3-6l- 4850691178519 4850691178519_33010609520663 Porsche 993 Camber/Caster Plates CCP993 https://hinzmotorsport.com/products/porsche-993-camber-caster-plates Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/Porsche993CamberPlates.jpg?v=1609956914 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 KW Stock 499.00 Porsche 993 Camber/Caster Platesu00a0Whether you are looking to add more fender clearance for wider wheels and tires, improve the handling of your car, or both, camber plates are the perfect solution.We have been running Ground Control camber/caster plates on our car for over three years now with 40,000+ street and 1,000+ track miles on them. These have held up amazingly well and do not have any increased NVH at all.The Ground Control STREET/SPORT plate, a special version of our camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control.Camber plates are anodized and the rest of the components are zinc plated for corrosion resistance.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for roughly 3 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL.Configuration options include 2.25", 2.50", 60mm, 70mm or Stock springs, low profile dome or standard dome plates, and a Poly spring bushing.Lifetime guarantee on these camber plates, not including bearings.*Subframe and chassis variations affect total camber gain (up to 16mm negative camber possible)**The included Ground Control nut must be used with these camber plates!**Torque camber plate mounting nuts to 18ft-lbs using a properly calibrated torque wrench. Pneumatic/electric impact gun not recommended.u00a0make-porsche,make-porsche-model-911,make-porsche-model-911-chassis-993--1994-1998-,make-porsche-model-911-chassis-993--1994-1998--submodel-carrera--quot-turbo-look-quot---3-6l-,make-porsche-model-911-chassis-993--1994-1998--submodel-carrera---carrera-4--3-6l-,make-porsche-model-911-chassis-993--1994-1998--submodel-carrera-4--quot-turbo-look-quot---3-6l-,make-porsche-model-911-chassis-993--1994-1998--submodel-carrera-rs--3-8l-,make-porsche-model-911-chassis-993--1994-1998--submodel-carrera-s---carrera-4s--3-8l-,make-porsche-model-911-chassis-993--1994-1998--submodel-gt2,make-porsche-model-911-chassis-993--1994-1998--submodel-rsr,make-porsche-model-911-chassis-993--1994-1998--submodel-turbo--3-6l-,make-porsche-model-911-chassis-993--1994-1998--submodel-turbo-s--3-6l- 4850691178519 4850691178519_33010606538775 Porsche 993 Camber/Caster Plates CCP993 https://hinzmotorsport.com/products/porsche-993-camber-caster-plates Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/Porsche993CamberPlates.jpg?v=1609956914 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 KW 70mm 499.00 Porsche 993 Camber/Caster Platesu00a0Whether you are looking to add more fender clearance for wider wheels and tires, improve the handling of your car, or both, camber plates are the perfect solution.We have been running Ground Control camber/caster plates on our car for over three years now with 40,000+ street and 1,000+ track miles on them. These have held up amazingly well and do not have any increased NVH at all.The Ground Control STREET/SPORT plate, a special version of our camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control.Camber plates are anodized and the rest of the components are zinc plated for corrosion resistance.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for roughly 3 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL.Configuration options include 2.25", 2.50", 60mm, 70mm or Stock springs, low profile dome or standard dome plates, and a Poly spring bushing.Lifetime guarantee on these camber plates, not including bearings.*Subframe and chassis variations affect total camber gain (up to 16mm negative camber possible)**The included Ground Control nut must be used with these camber plates!**Torque camber plate mounting nuts to 18ft-lbs using a properly calibrated torque wrench. Pneumatic/electric impact gun not recommended.u00a0make-porsche,make-porsche-model-911,make-porsche-model-911-chassis-993--1994-1998-,make-porsche-model-911-chassis-993--1994-1998--submodel-carrera--quot-turbo-look-quot---3-6l-,make-porsche-model-911-chassis-993--1994-1998--submodel-carrera---carrera-4--3-6l-,make-porsche-model-911-chassis-993--1994-1998--submodel-carrera-4--quot-turbo-look-quot---3-6l-,make-porsche-model-911-chassis-993--1994-1998--submodel-carrera-rs--3-8l-,make-porsche-model-911-chassis-993--1994-1998--submodel-carrera-s---carrera-4s--3-8l-,make-porsche-model-911-chassis-993--1994-1998--submodel-gt2,make-porsche-model-911-chassis-993--1994-1998--submodel-rsr,make-porsche-model-911-chassis-993--1994-1998--submodel-turbo--3-6l-,make-porsche-model-911-chassis-993--1994-1998--submodel-turbo-s--3-6l- 4850691178519 4850691178519_33010606571543 Porsche 993 Camber/Caster Plates CCP993 https://hinzmotorsport.com/products/porsche-993-camber-caster-plates Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/Porsche993CamberPlates.jpg?v=1609956914 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 KW 2.25" 499.00 Porsche 993 Camber/Caster Platesu00a0Whether you are looking to add more fender clearance for wider wheels and tires, improve the handling of your car, or both, camber plates are the perfect solution.We have been running Ground Control camber/caster plates on our car for over three years now with 40,000+ street and 1,000+ track miles on them. These have held up amazingly well and do not have any increased NVH at all.The Ground Control STREET/SPORT plate, a special version of our camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control.Camber plates are anodized and the rest of the components are zinc plated for corrosion resistance.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for roughly 3 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL.Configuration options include 2.25", 2.50", 60mm, 70mm or Stock springs, low profile dome or standard dome plates, and a Poly spring bushing.Lifetime guarantee on these camber plates, not including bearings.*Subframe and chassis variations affect total camber gain (up to 16mm negative camber possible)**The included Ground Control nut must be used with these camber plates!**Torque camber plate mounting nuts to 18ft-lbs using a properly calibrated torque wrench. Pneumatic/electric impact gun not recommended.u00a0make-porsche,make-porsche-model-911,make-porsche-model-911-chassis-993--1994-1998-,make-porsche-model-911-chassis-993--1994-1998--submodel-carrera--quot-turbo-look-quot---3-6l-,make-porsche-model-911-chassis-993--1994-1998--submodel-carrera---carrera-4--3-6l-,make-porsche-model-911-chassis-993--1994-1998--submodel-carrera-4--quot-turbo-look-quot---3-6l-,make-porsche-model-911-chassis-993--1994-1998--submodel-carrera-rs--3-8l-,make-porsche-model-911-chassis-993--1994-1998--submodel-carrera-s---carrera-4s--3-8l-,make-porsche-model-911-chassis-993--1994-1998--submodel-gt2,make-porsche-model-911-chassis-993--1994-1998--submodel-rsr,make-porsche-model-911-chassis-993--1994-1998--submodel-turbo--3-6l-,make-porsche-model-911-chassis-993--1994-1998--submodel-turbo-s--3-6l- 4850691178519 4850691178519_33010606604311 Porsche 993 Camber/Caster Plates CCP993 https://hinzmotorsport.com/products/porsche-993-camber-caster-plates Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/Porsche993CamberPlates.jpg?v=1609956914 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 KW 2.50" 499.00 Porsche 993 Camber/Caster Platesu00a0Whether you are looking to add more fender clearance for wider wheels and tires, improve the handling of your car, or both, camber plates are the perfect solution.We have been running Ground Control camber/caster plates on our car for over three years now with 40,000+ street and 1,000+ track miles on them. These have held up amazingly well and do not have any increased NVH at all.The Ground Control STREET/SPORT plate, a special version of our camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control.Camber plates are anodized and the rest of the components are zinc plated for corrosion resistance.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for roughly 3 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL.Configuration options include 2.25", 2.50", 60mm, 70mm or Stock springs, low profile dome or standard dome plates, and a Poly spring bushing.Lifetime guarantee on these camber plates, not including bearings.*Subframe and chassis variations affect total camber gain (up to 16mm negative camber possible)**The included Ground Control nut must be used with these camber plates!**Torque camber plate mounting nuts to 18ft-lbs using a properly calibrated torque wrench. Pneumatic/electric impact gun not recommended.u00a0make-porsche,make-porsche-model-911,make-porsche-model-911-chassis-993--1994-1998-,make-porsche-model-911-chassis-993--1994-1998--submodel-carrera--quot-turbo-look-quot---3-6l-,make-porsche-model-911-chassis-993--1994-1998--submodel-carrera---carrera-4--3-6l-,make-porsche-model-911-chassis-993--1994-1998--submodel-carrera-4--quot-turbo-look-quot---3-6l-,make-porsche-model-911-chassis-993--1994-1998--submodel-carrera-rs--3-8l-,make-porsche-model-911-chassis-993--1994-1998--submodel-carrera-s---carrera-4s--3-8l-,make-porsche-model-911-chassis-993--1994-1998--submodel-gt2,make-porsche-model-911-chassis-993--1994-1998--submodel-rsr,make-porsche-model-911-chassis-993--1994-1998--submodel-turbo--3-6l-,make-porsche-model-911-chassis-993--1994-1998--submodel-turbo-s--3-6l- 4850691178519 4850691178519_33010606669847 Porsche 993 Camber/Caster Plates CCP993 https://hinzmotorsport.com/products/porsche-993-camber-caster-plates Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/Porsche993CamberPlates.jpg?v=1609956914 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 MCS 60mm 499.00 Porsche 993 Camber/Caster Platesu00a0Whether you are looking to add more fender clearance for wider wheels and tires, improve the handling of your car, or both, camber plates are the perfect solution.We have been running Ground Control camber/caster plates on our car for over three years now with 40,000+ street and 1,000+ track miles on them. These have held up amazingly well and do not have any increased NVH at all.The Ground Control STREET/SPORT plate, a special version of our camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control.Camber plates are anodized and the rest of the components are zinc plated for corrosion resistance.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for roughly 3 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL.Configuration options include 2.25", 2.50", 60mm, 70mm or Stock springs, low profile dome or standard dome plates, and a Poly spring bushing.Lifetime guarantee on these camber plates, not including bearings.*Subframe and chassis variations affect total camber gain (up to 16mm negative camber possible)**The included Ground Control nut must be used with these camber plates!**Torque camber plate mounting nuts to 18ft-lbs using a properly calibrated torque wrench. Pneumatic/electric impact gun not recommended.u00a0make-porsche,make-porsche-model-911,make-porsche-model-911-chassis-993--1994-1998-,make-porsche-model-911-chassis-993--1994-1998--submodel-carrera--quot-turbo-look-quot---3-6l-,make-porsche-model-911-chassis-993--1994-1998--submodel-carrera---carrera-4--3-6l-,make-porsche-model-911-chassis-993--1994-1998--submodel-carrera-4--quot-turbo-look-quot---3-6l-,make-porsche-model-911-chassis-993--1994-1998--submodel-carrera-rs--3-8l-,make-porsche-model-911-chassis-993--1994-1998--submodel-carrera-s---carrera-4s--3-8l-,make-porsche-model-911-chassis-993--1994-1998--submodel-gt2,make-porsche-model-911-chassis-993--1994-1998--submodel-rsr,make-porsche-model-911-chassis-993--1994-1998--submodel-turbo--3-6l-,make-porsche-model-911-chassis-993--1994-1998--submodel-turbo-s--3-6l- 4850691178519 4850691178519_33010609553431 Porsche 993 Camber/Caster Plates CCP993 https://hinzmotorsport.com/products/porsche-993-camber-caster-plates Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/Porsche993CamberPlates.jpg?v=1609956914 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 MCS Stock 499.00 Porsche 993 Camber/Caster Platesu00a0Whether you are looking to add more fender clearance for wider wheels and tires, improve the handling of your car, or both, camber plates are the perfect solution.We have been running Ground Control camber/caster plates on our car for over three years now with 40,000+ street and 1,000+ track miles on them. These have held up amazingly well and do not have any increased NVH at all.The Ground Control STREET/SPORT plate, a special version of our camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control.Camber plates are anodized and the rest of the components are zinc plated for corrosion resistance.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for roughly 3 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL.Configuration options include 2.25", 2.50", 60mm, 70mm or Stock springs, low profile dome or standard dome plates, and a Poly spring bushing.Lifetime guarantee on these camber plates, not including bearings.*Subframe and chassis variations affect total camber gain (up to 16mm negative camber possible)**The included Ground Control nut must be used with these camber plates!**Torque camber plate mounting nuts to 18ft-lbs using a properly calibrated torque wrench. Pneumatic/electric impact gun not recommended.u00a0make-porsche,make-porsche-model-911,make-porsche-model-911-chassis-993--1994-1998-,make-porsche-model-911-chassis-993--1994-1998--submodel-carrera--quot-turbo-look-quot---3-6l-,make-porsche-model-911-chassis-993--1994-1998--submodel-carrera---carrera-4--3-6l-,make-porsche-model-911-chassis-993--1994-1998--submodel-carrera-4--quot-turbo-look-quot---3-6l-,make-porsche-model-911-chassis-993--1994-1998--submodel-carrera-rs--3-8l-,make-porsche-model-911-chassis-993--1994-1998--submodel-carrera-s---carrera-4s--3-8l-,make-porsche-model-911-chassis-993--1994-1998--submodel-gt2,make-porsche-model-911-chassis-993--1994-1998--submodel-rsr,make-porsche-model-911-chassis-993--1994-1998--submodel-turbo--3-6l-,make-porsche-model-911-chassis-993--1994-1998--submodel-turbo-s--3-6l- 4850691178519 4850691178519_33010606702615 Porsche 993 Camber/Caster Plates CCP993 https://hinzmotorsport.com/products/porsche-993-camber-caster-plates Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/Porsche993CamberPlates.jpg?v=1609956914 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 MCS 70mm 499.00 Porsche 993 Camber/Caster Platesu00a0Whether you are looking to add more fender clearance for wider wheels and tires, improve the handling of your car, or both, camber plates are the perfect solution.We have been running Ground Control camber/caster plates on our car for over three years now with 40,000+ street and 1,000+ track miles on them. These have held up amazingly well and do not have any increased NVH at all.The Ground Control STREET/SPORT plate, a special version of our camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control.Camber plates are anodized and the rest of the components are zinc plated for corrosion resistance.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for roughly 3 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL.Configuration options include 2.25", 2.50", 60mm, 70mm or Stock springs, low profile dome or standard dome plates, and a Poly spring bushing.Lifetime guarantee on these camber plates, not including bearings.*Subframe and chassis variations affect total camber gain (up to 16mm negative camber possible)**The included Ground Control nut must be used with these camber plates!**Torque camber plate mounting nuts to 18ft-lbs using a properly calibrated torque wrench. Pneumatic/electric impact gun not recommended.u00a0make-porsche,make-porsche-model-911,make-porsche-model-911-chassis-993--1994-1998-,make-porsche-model-911-chassis-993--1994-1998--submodel-carrera--quot-turbo-look-quot---3-6l-,make-porsche-model-911-chassis-993--1994-1998--submodel-carrera---carrera-4--3-6l-,make-porsche-model-911-chassis-993--1994-1998--submodel-carrera-4--quot-turbo-look-quot---3-6l-,make-porsche-model-911-chassis-993--1994-1998--submodel-carrera-rs--3-8l-,make-porsche-model-911-chassis-993--1994-1998--submodel-carrera-s---carrera-4s--3-8l-,make-porsche-model-911-chassis-993--1994-1998--submodel-gt2,make-porsche-model-911-chassis-993--1994-1998--submodel-rsr,make-porsche-model-911-chassis-993--1994-1998--submodel-turbo--3-6l-,make-porsche-model-911-chassis-993--1994-1998--submodel-turbo-s--3-6l- 4850691178519 4850691178519_33010606735383 Porsche 993 Camber/Caster Plates CCP993 https://hinzmotorsport.com/products/porsche-993-camber-caster-plates Ground Control https://cdn.shopify.com/s/files/1/0045/1179/3186/products/Porsche993CamberPlates.jpg?v=1609956914 https://cdn.shopify.com/shopifycloud/shopify/assets/no-image-2048-5e88c1b20e087fb7bbe9a3771824e743c244f437e4f8ba93bbf7b11b53f7824c.gif true 4536 g 0 MCS 2.25" 499.00 Porsche 993 Camber/Caster Platesu00a0Whether you are looking to add more fender clearance for wider wheels and tires, improve the handling of your car, or both, camber plates are the perfect solution.We have been running Ground Control camber/caster plates on our car for over three years now with 40,000+ street and 1,000+ track miles on them. These have held up amazingly well and do not have any increased NVH at all.The Ground Control STREET/SPORT plate, a special version of our camber/caster plates, toned down for dual-purpose cars. These plates use a proprietary upper spring perch. An oversize American central bearing to reduce flex, and a waterproof German steering bearing make smooth steering and unlike stock or poly bushed alternatives make this camber plate fully rebuildable.A work of art, carved from a single piece of billet aluminum. That is the only way to describe this new street camber plate from Ground Control.Camber plates are anodized and the rest of the components are zinc plated for corrosion resistance.The plate slides to allow camber and caster adjustment, as well as access to adjustable struts! It fits entirely within stock sheet metal with no cutting or trimming. They are available in multiple configurations and depending on the options chosen allow for roughly 3 degrees of camber*. with NO CHANGE in ride height or NO LOSS OF SUSPENSION TRAVEL.Configuration options include 2.25", 2.50", 60mm, 70mm or Stock springs, low profile dome or standard dome plates, and a Poly spring bushing.Lifetime guarantee on these camber plates, not including bearings.*Subframe and chassis variations affect total camber gain (up to 16mm negative camber possible)**The included Ground Control nut must be used with these camber plates!**Torque camber plate mounting nuts to 18ft-lbs using a properly calibrated torque wrench. Pneumatic/electric impact gun not recommended.u00a0make-porsche,make-porsche-model-911,make-porsche-model-911-chassis-993--1994-1998-,make-porsche-model-911-chassis-993--1994-1998--submodel-carrera--quot-turbo-look-quot---3-6l-,make-porsche-model-911-chassis-993--1994-1998--submodel-carrera---carrera-4--3-6l-,make-porsche-model-911-chassis-993--1994-1998--submodel-carrera-4--quot-turbo-look-quot---3-6l-,make-porsche-model-911-chassis-993--1994-1998--submodel-carrera-rs--3-8l-,make-porsche-model-911-chassis-993--1994-1998--submodel-carrera-s---carrera-4s--3-8l-,make-porsche-model-911-chassis-993--1994-1998--submodel-gt2,make-porsche-model-911-chassis-993--1994-1998--submodel-rsr,make-porsche-model-911-chassis-993--1994-1998--submodel-turbo--3-6l-,make-porsche-model-911-chassis-993--1994-1998--submodel-turbo-s--3-6l- 4850691178519 4850691178519_33010606768151 Porsche 993 Camber/Caster Plates CCP993 htt