Description
Ohlins Dedicated Track Coilovers
If you are looking for the highest quality coilovers for track use, look no further than the Ohlins DEDICATED suspension system. These coilovers offer race-level performance ready to bolt onto your car.
These coilovers are built with Swift springs manufactured to Ohlins specs. Shake rig developed and track validated with specific spring rates, clicker settings, and ride height specifications. The entire performance picture is taken into account when developing their DEDICATED systems, as each is engineered to perform with proven track setups for each specific chassis.
Systems utilize Dual Flow Valve technology allowing engineers to tune force curves ideally balanced for chassis support and maintaining traction over pavement irregularities and on-track curb strikes. Spherical upper mounts included.
The Ohlins team has extensively tested a wide variety of springs to find the perfect setup for track-focused coilover. With that, we recommend the listed spring rate that comes with these dampers (110N/mm Front, 130N/mm Rear).
*Please allow up to 3 weeks for delivery*
*All fitments are shown below*
Highlighted Features:
-
DFV Technology (Dual Flow Valve)
- Developed for Track Cars
-
Adjustable Damping and Ride Height
- Includes Spherical Upper Mounts
-
Rebuildable
Front:
-
McPherson strut, upside down
-
Compression and rebound damping with one adjuster
-
Spring preload adjuster
-
Approx. 20 mm lower than standard with recommended setup
-
Height adjustment range -15/+15 mm
-
Spring Rate 110 N/mm
Rear:
-
McPherson strut, upside down
-
Compression and rebound damping with one adjuster
-
Spring preload adjuster
-
Approx. 20 mm lower than standard with recommended setup
-
Height adjustment range -15/+15 mm
-
Spring Rate 130 N/mm
The Ohlins EDC Cancellation Kit (35020-07) for Road and Track deactivates dash lights and error codes when electronically adjustable OEM suspension is replaced with a mechanical system. The cancellation kit is plugged into the original suspension controls. No further programming is needed.
Fitment: POU MU40